P43 Neo - PCI wireless LAN performance problems

Hi,
i recently installed the Neo P43 Board. Everything runs fine so far, except PCI wireless LAN (maybe more, it's the only PCI card I use). I already updated the BIOS to 1.6 but it doesnt fix it.
I tried 2 different WLAN cards (1 Realtek and 1 Ralink). Both of them basicly work, but the transfer rates are painfully slow although the connection quality is reported as good enough.
Anyone else having issues?

How low are the transfer rates?
It varies a bit but most of the time very low (as low as 1kbps or sometimes not working at all)
What are you connected to (Router?, What kind of Router)?
Connected to a router. It's a "Speedport" router, I think they are manufactured by Siemens.
When you talk about the transfer rate, do you mean the transfer rate that you get when you try to copy files to another system in a Wireless network?
I mean downloading files from the Internet over the router, or generally the connection to the router (like status page).
The Ralink card used to work just fine in my older PC with an Athlon XP / Nforce Chipset (and several other PCs), but on the Neo P43 makes problems with both, the Ralink and the Realtek card.
I'm not absolutely sure it is the board that makes these problems, but I can't think of any other source for this problem anymore.

Similar Messages

Looking for hardware (PCI Wireless LAN)

I'm looking for a PCI Wireless LAN card that will work well with Linux, does anyone know of any place that documents this sort of thing? (as in a list)

Euphoric Nightmare wrote:Okay, just figured out i can't use pci, because there are no slots available...fucking dells...i'll have to look at some other options
I think it's other option, singular - as in USB? I recently had to switch wifi to USB myself, when my laptop's card slots died. After a bit of research, I went for the prism2 chipset with the wlan-ng driver - specifically, the Netgear MA111. It's all working fine now, but in retrospect, I'd probably go for something that works better with wireless_tools.
AFAICS, there aren't any stable drivers for 802.11g over USB - madwifi may or may not do it, depending on Atheros, prism54 is trying, and they have pre-alpha stuff available for the brave/foolish, and there's also the zd1211 project on sourceforge.

PCI Card Slot - Wireless LAN Card Problems - Help!

Help.
I'm having problems getting my board to recognize both:
Linksys WMP11 Wireless LAN card; and
Netgear WG311T Wireless LAN card
(returned the Linksys card, but the Netgear card had the same problem).
Neither card is being picked up by Windows (XP Home), although both the "power" and "link" LED lights up when inserted. I've tried every PCI slot, same issue. Nothing shows up in the device manager, and no new hardware is detected. The Netgear software tells me that the card has not been installed.
Am left thinking I need to RMA the board. Any suggestions woudl be much appreciated.
K8N Neo Platinum
AMD 64 3200+
512mb OCZ 3200EL
Samsung 120mb SATA 7200rpm
Pioneer 108D DVD
Sapphire 9600xt

My roommate has a similar setup as you and I am having the same problem getting a pci wifi card to work in the machine. I have tried both a Linksys WMP54G and a Netgear WG311. Both cards will scan for networks bit will never connect my router (Linksys WRT54G). Just to get them to recognise the network, I have to turn off WEP, and turn on ESSID broadcast. Both of these cards work prefect in other computers. I know it not a signal problem because I can take my laptop and set it in the same location and it gets excellent signal.
I have tried changing slots in the machine, the wifi cards were the only PCI cards in the machine and an GeForce 6800 GT in the AGP slot. I have no idea what the problem could be. But I'm leaning towards the mobo at this point.

K9A2 Neo + AMD X2 6000+ performance problem

Hello!
I got this problem wich i wonder if it has to do with the chipset contra graphic card.
I used to have an AMD X2 3800+, ASUS A8N5X NFORCE4 mobo, 2gb PC3200 400mhz, and i exchange those for AMD X2 6000+, MSI K9A2 Neo, 2gb Corsair XMS2 800mhz. My graphics card is a NVIDIA GF8000GTS running under Win XP 32.
My problem comes down to that this new gear runs like my older. If not worse at times. And my friend that has an identical system can play on very high settings without any stutter while i have to play on normal. Exactlly as my older system. The difference we have is that he is using a NFORCE motherboard. Im now wondering if that has such an impact on performance? Having a NVIDIA graphics card and use this MSI with ATI chipset.
When i baught it today i asked for NFORCE but i guess he forgot after picking it up and handing it to me, and i ofcourse forgot to double check. I thaught it was NFORCE7 when i saw the "770" marking. I also installed some AMD CPU DRIVERS that came with the disc. Dont know what they are for. Never seen that before. I also skipped installing the "ATI SYSTEM DRIVERS" as i figured i dont use ATI graphics card. Dont know if i should?
I will exchange this for a NFORCE mobo, but i just wanted to check with you if this really can have such impact on performance.
I have everyhing else updated to latest drivers with XP SP3 up to date.
Hope for some answer. Thank you in advance.
Regards
Alex

My friend and i got the same gear apart from the nforce mobo.
I got a 500W PSU and it should do as antother friend of mine got 600W and running SLI and faster CPU, more RAM etc. When i installed this i ofcourse formatted and made a fresh install. Unless you mean that i need to install the ATI SYSTEM DRIVERS first? I dont know if its 30 AMPS on the PSU though. Need to check that.
To me it just sounds more sain to use Nvidia chipset together with Nvidia graphics card, and ATI chipset with ATI graphics. But as you say you got no performance probs with that i might be wrong. However i am comparing to a friend with the same gear and playing online at the same time. He can go way up in settings i cant. I even stutter on the normal settings, and he doesnt on the high settings.
Gotta check the 30AMPS now.
Thanks for your ideas. Your probably right. Will check.
Regards
Alex

MX922 wireless LAN setup problems with iMac

I am trying to setup my new MX922 printer with a new imac. During the original setup phase, I got a message instructing me to press the "WPS" button on the "access point" for 3 seconds. Before I could figure out what the heck either a WPS button or an access point is, the setup screen on the printer disappeared. Now I will have to go back through the setup process again, but the instructions to do so include using the dosc. My imac does not have a disc drive. I know that the files can be downloaded on the canon website, however there are several drivers or software programs for the MX922 that can be downloaded, and it is not at all clear which I would need.

Hi Toeknail,
To install the printer wirelessly, please click on the link below to go to the Drivers and Software page for the PIXMA MX922:
PIXMA MX922 Drivers and Software page
Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, another page will appear giving details of the file you are about to download will appear.
3. Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button. After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded and installed the CUPS driver file from the website, please also install all other items from the Recommended for You section of the website. Please also download and install the ICA drivers from the "DRIVERS" section, and all of the software from the SOFTWARE section of the page.
Since you plan on using the printer wirelessly, please be sure to install the Canon IJ Network Tool (found in the Recommended for You section) last after all other software has been installed.
Once all items have been downloaded, please double-click on each of the items on your Mac to install them. Once all items have been installed, please restart your Mac and attempt to print.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Wireless Lan PCI card Ralink- System Preferences Network Configuration HELP

I just bought a PCI Wireless Lan Card for my G5 tower.
Specifically the card i bought is:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=220500089785&ssPageName=STRK: MEWNX:IT
It is a Ralink - www.Ralinktech.com
I installed the driver. Both the card and the driver show up in the System Profiler.
BEYOND THIS I AM CLUELESS!

PCI Is at the top of the list. it says NOT CONNECTED next to it. But. Where it says status it says: "STATUS: Cable unplugged" ( and underneath) "The cable for PCI Ethernet Slot 4 is not Plugged In."
What cable??
Configure is set to "Using DHCP"
As i said before. in system profiler it shows up in the correct slot and the driver is installed.
Ralink has its own software that pops up too called WirelessUtilityCardBusPCI. Without me doing anything, my router name shows up on its list so it does recognize it. But connecting to the internet i cannot do nor getting it to come up in System Prefs. Anybody Mess with WirelessUtilityCardBusPCI?

Software downloads for Aironet 350 Wireless LAN Adapter

Where can I get the software to install the Aironet 350 Wireless LAN Adapter? Will it have a client manager? I think that's what the software is to switch settings as you change locations.Model: AIR-PCM352

Hi,
You can download the software from the below link using your CCO login:-
http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875243
Cisco Aironet Wireless LAN Client Adapters
Cisco Aironet 340 Wireless PC Card Adapter
Cisco Aironet 340 Wireless PCI/LMC Adapter
Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter
Cisco Aironet 350 Wireless LAN Client Adapter
Cisco Aironet 5 GHz 54 Mbps Wireless LAN Client Adapter (CB20A)
Cisco Aironet 802.11a/b/g CardBus Wireless LAN Client Adapter (CB21AG)
Cisco Aironet 802.11a/b/g PCI Wireless LAN Client Adapter (PI21AG)
Plz rate if this help.
Regards
Inayath Shariff

[P43 Neo-F] No Pci-e Frequency option in BIOS??

Hi..
I am using a MSI P43 Neo F Board(MS-7519).
Now I am facing the FSB Wall problem of this board and the only solution I have found is to increase Pci-e frequency to 104 as suggested by the main topic about this problem on this forum. But the problem is that there is no pci-e frequency option in my bios. Bios is latest as confirmed by live update software but there is no such option.
Can anyone help me on that?why is that I have the same model but not the same options??

Quote from: Adiel on 13-April-11, 04:02:00
You have not used P43 Neo F I suppose, that mobo does not go above 400 or 415 fsb, search the internet, its a common problem, and the only solution is the one i posted. But why is that the bios of my mobo does not have this option??
Its most likely because the parts are not the same and even if they were they wouldn't work the same.
Like he mentioned already, it works for some and not for others. Its a fickle thing, it isn't a matter of "oh hes better so it works" its more like "his CPU's die isn't as f-ed up as yours is". Something along those lines.

Windows 8 and Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

Hi!
I hava a Toshiba L650 - 107 PSKI JE and I am having a problem with the my wireless network adapter on windows 8.
My network adapter is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC and works fine on windows 7. Two days ago I formatted my hard drive and install windows 8. The problem is that for much drivers I keep installing, The wireless keep turned off. There's no way I can move the slide from off to on.
I already tried a lot of drivers from toshiba and from realtek but doesn't work.
I went to see the Network Connections (Control Panel > Network and Internet > Network Connections) and the Ethernet is fine, I connect a cable and it is fine, but wi-fi says "Not connected".
How do I solve this problem?

Satellite L650-107 (PSK1JE-00P003EP)
Downloads here.
A computer from Portugal? (Specifications attached.)
This driver should work on Windows 8.
Realtek Wireless LAN Driver
But your problems may be more fundamental. Prior to loading Toshiba-specific programs, you probably need to install something like this.
Toshiba System Driver - Windows 8 beta
And for the function keys to work, you'll need still another Toshiba utility.
-Jerry
Attachments:
satellite_l650.pdf ‏3264 KB

Problem in Wireless LAN

Hi, I have T61 Dual 2 Core laptop 2.1 GHz and 3 GB RAM. Since one year I am using builtin wireless LAN but now problem started, when I switch ON of wireless LAN button, it automatically off after 2 to 3 minutes and also light of wireless LAN is off. I need to OFF and ON the wireless LAN button to start working again Internet but after 2 minute it again OFF?
What is the problem? either wireless LAN is failed or some virus or software problem?

go into your control panel -> system -> hardware device -> wireless card property, switch off power save mode, switch roaming aggressiveness to low and switch power output to maximum.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

[SOLVED] Very strange P43 Neo-F + sata drive problem in vista...

Well I'd been running Windows 7 flawlessly apart from a few non-related motherboard problems, so I decided to install Vista.
Basically my main OS drive (sata) is always detected, but then occasionally (more often than not) my secondary sata drives will simply not be listed in device manager once the system is booted up. Now, I've seen this problem before, and it was sorted by right clicking 'my computer' going to 'manage' and setting the drives up to be detected. But this simply isn't the case here.They don't appear anywhere!
It sometimes sorts itself out once I click 'Scan for hardware changes' in device manager and they magically appear as if ive just plugged in a USB device, which is fine I guess...but each time it swaps the damn drive letters around! So having media library's in Winamp, etc or putting a shortcut toolbar to my music on the taskbar is all but pointless!
All of my hardware apart from Bluetooth has drivers installed for it, and nothing seems to be conflicting at all. Does anyone have any idea why this is
happening? because in all my years of computing I've never seen something as strange as this...
As far as I know I have the latest Intel INF drivers installed (9.0.0.1011)
This is the board: http://www.ebuyer.com/product/148024

I can't see how it'd be PSU because Win7 was just fine...but here it is...
PSU: OCZ XStream 600W PSU
100~240Vac 10-5A 50/60Hz
+3.3V(36A), +5V(30A), +12V1(18A), +12V2(18A), +12V3(18A), +12V4(18A)
Specs:
Dual Core E5200 2.5GHz
4GB Corsair RAM + 2GB OCZ RAM
nVidia GeForce 9600 GT
MSI P43 Neo-F
Not detected (at Vista startup) drives:
Hitachi HDP725050GLA360
ST3320620AS
(they show up perfectly fine in DOS, but I remember only the drive below appeared during Vista setup drive options...)
Detected Primary OS drive:
WDC WD800JD-00LUA0
My drives in BIOS are set to IDE mode (which has always been fine for me in the past). I set it to AHCI Mode to check if it boots but it just sticks on the same screen (flashing underscore). I'm sure it's driver related but I'm totally out of options now...you'd think installing the ones provided on the MSI site would get it working... :/
Another thing is under 'Storage Controllers' in device manager, there is only an IDE Controller. I'm sure there should be a SATA one there, too?

Voice over IP Roaming problems between 2 Wireless Lan Controllers.

Hello,
we have problems with Voice over IP roaming between 2 Wireless Lan Controllers, this problem is not always happening. I have attached the detailed configuration. We are using LWAPP 1242 & WLC 2106 Controllers.
The phones they are using are Siemens Enterprise optiPoint WL2.
Is there maybe something wrong with the configuration our can I try some different settings?
Regards,
Jordy Broekhuizen

When a wireless client associates and authenticates to a WLC, it places an entry for that client in its client database. This entry includes the MAC and IP addresses of the client, security context and associations, quality of service (QoS) contexts, the WLAN, and the associated LAP. When a client roams to another LAP associated to the same WLC, it just updates the client database with the new LAP information so that the data can be forwarded appropriately to the client. When a client roams to a LAP associated with a different WLC, either in same or different subnets, it sends the information in the client database to the new WLC. This helps client to retain its IP address across roams and maintain uninterrupted TCP sessions. For more information on roaming in the WLC environment.
For the further description following URL for the WLC may help you
http://www.cisco.com/en/US/docs/wireless/controller/5.1/configuration/guide/c51ovrv.html

Problem arised after updated the intel wireless lan

Hello, everyong
My laptop is T510. I just updated the intel wireless lan to the version of 15.02.0000.1258. After the updates, my wireless router was down when the laptop started. Initially it can connect to the router for a few seconds, then the router was down with all the lights going off except the power light. Once I restart the router, everything goes fine, my laptop is able to connect to the router without any problems. So I have to restart the router everytime when I start my laptop. Please help me. How to fix this problem?

Why do you have to restart the router.
Have you checked the computer WiFi profile? Why or what is not allowing the connection.
You could delete the computer profile in Access or whatever you're using and discover, reconnect to it again as if its the first time. It may resolve the issue which is unknown.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

N82 V30.0.013 Bluetooth and Wireless LAN problems

I am using an N82, but it looks like there are similar problems with everything using similar firmware. I didn't have any of these problems with the V20 firmware that came with the phone or after the first V20 upgrade I used.
I find that my wireless LAN connections sometimes only let me browse a few pages before I get the "web connection timed out" message. If I change wireless LAN connection (I have two, mostly for testing purposes) I can continue browsing. Of course the same error may happen causing me to switch again. Sometimes it just works. Both have WPA set up and the passwords are clearly correct. If I use Real Player I can typically listen for as long as I like. Sometimes the connection to the server will drop for Real Player but reconnecting will work (don't have to change wireless LAN network). With the web browser it seems like the data connection is dead, not a server timing out - the message appears instantly. I think have seen the same problem once with my 3G connection, but I haven't recreated it. Could be my imagination!
I have never had any problems with IMAP email using either the Nokia client or Profimail on either the wireless LAN connection or 3G. It leads me to believe that there is nothing wrong with the wireless LAN side of things and it may be more to do with the web browser, or perhaps just that the email clients are only talking to one server helps (DNS problems?). Has anyone experienced similar problems with an alternative browser?
I have also found that when I get to work my bluetooth dongle doesn't connect to my phone. If I disable/enable bluetooth on my phone it will connect. I had this problem with my N80 with the first firmware I had on it and the problem went away after an upgrade.
So, it seems that both connections are fixed by turning them off and on again.

Having both routers the same IP address is a little bit confusing, but possible since each router creates it's own subnet and provides full PNAT support. Actiontec DSL modem has to have DHCP enabled since Linksys WAN (not LAN) port should be connected to one of 4 Actiontec LAN ports. Linksys should not have any configuration setup in regards of your WAN account. Just set it to dynamic address. In ohter words:
1. RJ-11 connect to Actiontec mode/router.
2. Actiontec modem should be configured to acquire an IP address from Verizon and to provide all authentication info to Verizon.
3. Actiontec modem should be configured to allow clients to acquire dynamic IP addresses -- DHCP enabled.
4. Linsys WAN (not LAN!) port should be connected to Actiontec LAN port.
5. Linksys should be configured to acquire dynamic IP address and no authentifacations.
6. Configure Linksys to be DHCP enabled or you can use static IP addresss if you want.
7. Wireless devices would be connected to Linksys and on the way to the Internet addresses would go through double NAT conversions. Any wired device connected to Linksys would have similar features. Any device connected to Linksys should be able to connect 192.168.1.1 assigned to Linksys, but not to Actiontec.
8. To be able to connect Linksys and Actiontec would no be able to communicate unless you split 192.168.1.0/24 into smaller subnets and set specific routes in the table. But even you do so you will not be able to access 192.168.1.1 accross subnets boundary.
Hope it helps.

Help! Is my P43 NEO mobo the problem?

Forgive me for being a novice. I don't really know what to do.
I built a new computer with the following
MSI P43 Neo (MS-7519) BIOS V1.3 (A7519IMS)
ATI Radeon HD 4830
2GB OCZ DDRAM2.
Seagate SATA Hard Drive.
LG DVD RW.
Intel E5200
It blue screened every time I tried to play 3D games, with ATI2DVAG.dll error. I updated all the ATI drivers, but it didn't work.
So I sent the Radeon card back.
Worried that the Mobo wasn't compatible with that card, I bought a ATI Radeon HD4850 instead.
Now I get a ATI3DVAG.dll error whenever I try to play 3D games.
Are ATI cards just not compatable with this motherboard? Or is it my memory? Or something else? Do I flash the BIOS.
I'm running WIN XP. I was on Service pack 2, but upgraded to service pack 3 to try and fix the problem.
Nothing works. That's two cards now, and I still can't play 3D games. It usually crashes within minutes.When the computer boots up and the MSI logo is shown, it makes two beeps. It didn't do this with the last card, but now it does. Does that mean it's the memory?
Any ideas? I don't know where to go from here.

Check your memory with memtest86+ and if no errors are found and the system is stable, please update your BIOS to the latest version. >>Use the MSI HQ Forum USB flasher<<

P43 Neo - PCI wireless LAN performance problems

Similar Messages

Maybe you are looking for