P45 All In One Bios Page

Hi Guys,
Been looking for some older bios revisions for my P45, namely 1.4.
I've used the search function a couple times trying to find older bioses but no luck.
I was hoping maybe you could set up a thread/sticky with all the bioses from msi released to beta and performance.
If you can't do that then maybe a link to the 1.4 please. Currently using 1.5 but was reading around today after a few months inactivity and noticed people can't really get above 400fsb(thats where im stuck at too :( e7400 @ 9x400). So I have downloaded the latest beta(1.7b9) and got it all ready on a flash drive. Was just hoping to get 1.4 incase I don't like the 1.7b9.
Thanks
Ninjatsu

Quote
for my P45
You mean P45 Platinum, right? You should always mention the full board name.  There are numerous P45 Boards with numerous different BIOS Versions.
Quote
I was hoping maybe you could set up a thread/sticky with all the bioses from msi released to beta and performance.
There already is a thread that is about BETA and Performance Releases for this board:
https://forum-en.msi.com/index.php?topic=117741.0
There is no real point in a sticky, I think.
Quote
Been looking for some older bios revisions for my P45, namely 1.4.
All final BIOS Releases can be found on the product site for the board (including v1.4):
http://global.msi.eu/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1479

Similar Messages

  • HP Photosmart C5280 All-in-one Alignment Page message keeps scrolling

    The HP Photosmart C5280 All-in-one display shows "No printing Alignment Page" scrolling for the last 30 minutes.
    Also, suddenly, this printer is no long listed in my control panel.
    I installed new cartridges about a week ago and they worked fine until this week.

    Hi there,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Deskjet F4240 All-in-one - BLANK PAGES

    Hi - I have a HP DESKJET F4240 All in one printer.  When I print a page from Word, notepad or even try to print a test page it acts likes it printing but all I am getting are blank pages.  I have pulled out the usb and power cord, waited a minute and put back in, restarted my computer, everything they say online and I still can't seem to make it work.  Wondering if anyone has any advice?  Thanks

    wish i could help , we have an officejet, 4260 and it half the time does the same, or it will consantly kick out a blan with a printed one. don't understand why the amount of money they make off public for there expensive items , why they can't make them more wothwhile , we have made up our minds when we no longer have warrantys we are going to the Emachines Products they are the best made. and work well, we now many with them and has had no problems for all the yrs they have owned one.

  • Copies from my all-in-one are pages of solid black streaks

    The copies from my all-in-one are completely streaked with black ink.  I have attempted all the trouble shooting suggestions with no success.
    Is there something else I should be aware about?

    Hi Scrabbler,
    I would be happy to help you with the streaks you are seeing when copying from your printer. What printer do you have? How Do I Find My Model Number or Product Number?
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hp all-in One remote prints test page but cannot find printer for anything else

    The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer.  The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

    Hello , Welcome to the HP Forums!
    I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect:  1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

  • Scanning multiple pages with all in one printer using AiO software.

    I have the HP all in one printer and when I scan a document even if I add a page, each page has its own PDF identification. I cannot seem to get multiple pages in one scan that I can email as one document. Please advise.

    Hi Grwltgr
    If you have an ADF(Automatic Document Feeder) tray keep all the pages you want to scan and start scan. All the scanned pages will be added in a single pdf. 
    If you dont have an ADF tray, i might be able to help you if you can let me know the Complete Model Name.
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    Is Acrobat Pro right for us. We have an Employee Handbook that needs editing. Some is current pdf, some from an older version. Want to get all into one handbook, have the table of contents automatically adjust and link to specific pages from the ToC.

    You can download the trial version (http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html) to convert the PDF back to WORD if you do not have the original. The conversion may not be perfect, but it is typically better than starting from scratch. You may be lucky and get a good result. You might check the settings (in the save screen) to try retain format versus retain text flow. The format version can be a pain to edit since it creates a bunch of text boxes. The flow version may require you to reformat in WORD, but you likely would want to do that anyway.

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • I want to pare down my inbox mails. Can I delete more than one page of inbox multiple mails, e.g., all mails from an address that number in the hundreds, all at one time?

    I only know to delete emails I want to discard, after search and finding hundreds, by the page (up to 50). How can I delete all at one time, to save me hours of tedious work?

    Firefox doesn't do email, it's a web browser.
    If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
    If your problem is with Mozilla Thunderbird, see this forum for support.
    [http://www.mozillamessaging.com/en-US/support/] <br />
    or this one <br />
    [http://forums.mozillazine.org/viewforum.php?f=39]

  • HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

    I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie  ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ?  Loooking for any answers ! Thank Yopu ,JS

    Hi jspin3,
    I'd like to help.  For now, I would hold off on the uninstall and reinstall.  Can you answer some questions?
    Is the printer connected by USB, Ethernet or wireless?
    Do you get any error messages?
    Does a blank page come out or do no pages come out when you try to print from the computer?
    If you put a document face down on the scanner glass, are you able to make a photocopy?
    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge?  Click Here 
    If you print a  Self Test Report,  do all of the colors print?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • How do you scan multiple pages to my computer using a C5580 all-in-one printer

    how do you scan multiple pages to my computer using an HP Photosmart C5580 all-in-one printer?

    Hi @carolpaige 
    I would be happy to help you scan multiple pages. What operating system, and version do you have? Mac or Windows?
    You will need to save your files as PDF, and when you choose the PDF format you will see an option to have all scanned pages saved as a single file. Knowing your operating system will help me to provide you with more detailed instructions.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

    I have an HP Photosmart C4180 all-in-one, printer, scanner and copier.  I can't figure out how to scan more than one page?  It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement.  Any ideas??
    Thank you, Jetteski

    Hello Jetteski,
    Hello Jetteski, Thanks for the post.
    Since you are running a MAC, check the below links for some excellent information on scanning.  Good Luck!
    http://goo.gl/M8Cl2
    http://goo.gl/cufK6
    http://goo.gl/OTQoR
    I work for HP but my posts and replies are my own....Thank you!

  • My HP Officejet 8500a All-In-One forwards faxes (as a tiff file) to my iphone.  Can only view/receive 1st page, embedded into email as a non-attachment.  Iphone receives email(s) pdf attachments well.  What can I do?

    My HP Officejet 8500a All-In-One forwards faxes (as a tiff file) to my iphone.  Can only view/receive 1st page, embedded into email as a non-attachment.  Iphone receives email(s) pdf attachments well.  What can I do?

    Try this app
    http://itunes.apple.com/us/app/fax-reader/id406902152?mt=8

  • Just installed HP BIOS Update. HP 6110 all in one printer no longer works.

    Just installed HP BIOS Update.  System no longer recognizes my printer (6110 all-in-one).  HP web site says driver is in OS and should be recognized, but only driver that is close is 6100 series and it does not work. 

    Hey thecityhouse,
    When you are selecting the driver from the available drivers list did you make sure to press the Windows Update button at the bottom right to prepopulate the list?  This may have to be performed to get the proper driver for your printer.
    If this does not work, then I would take a look at the information in the post found here.  It may provide a workaround to the issue you are experiencing.
    Hope this helps,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • HP ENVY 4500 e-All-in-One Printer/Mac OS 10.6/can't scan multiple pages as single document/file

    Mac OS X 10.6.8
    HP Scan app 4.4.1
            In the HP ENVY 4500 e-All-in-One Printer support page for scanning with a full feature driver installed. Under "How to scan a multi-page original into a single file for HP Scan software version 4.0. Everything is OK until after I've scanned the documents and clicked "Done". (Step # 6) & Click Send , click Folder , name your file, and then save the file to the computer.(Step # 7)
    This is where I go wrong. I can't find the Format drop-down menu to complete Steps 8 & 9.
    Click the Format drop-down menu, select Contents , and then check the box to Save all items to a single file . 
    Click Save .
    This question was solved.
    View Solution.

    Hi MaWoo, 
    Thanks for your post and welcome to HP Forum. 
    Please make sure you select PDF or Searchable PDF as the Format. You should then find a box to check for "Combine into single document". 
    Best regards,
    Mandy
    Say "Thanks" by clicking the Thumb up in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    Although I work for HP my posts and replies are my own

Maybe you are looking for

  • Page twice as wide in IE

    Its me again...... Im having an issue in IE where my layout is completely messed up. I know im not designing with css and I should be but I came onto this job to redesign with whats currently there so its a little difficult. All but one of my pages a

  • Problems while defining EJB relations for container managed bean

    I am having a problem while trying to create my relations for my container managed bean. My Database schema is: Order table order_id message WorkItem table: order_id item_id message I have defined my OrderBean to have: @LocalMethod() @CmrField public

  • HTTP - SOAP

    Hi gurus, We want to create the following scenario: HTTP - XI - SOAP We have test with several combinations of the parameters of the HTTP Adapter Sender and the SOAP Adapter Receiver and we obtain: java.io.IOException: invalid content type for SOAP:

  • WebDynpro for Java and GuideProcedure for workflow.

    Hi All, I need inputs on how to create Webdynpro java screns for GP and create a workflow using them . I will be thankfull if someone could help to know how to send an email notification also in this workflow scenario. Thanks and Regards, Sai

  • Open and receiving a Windows mediaplayer stream

    Hi, I have 2 problems / Questions. I have a friend who is streaming media from Windows medial player in MMS format, with a .asx suffix. When I click he URL a new html windows open that is supposed to show and start the stream. The source code for the