P45 and Win7 problems?

Hi,
My system is about 10 months old, homebuilt, originally installed Vista64. It took a while but with bios Ver.1.4 was finally able to get stable,Ram at 1066 and OC to 3.0ghz.
Upgraded to Win7 64. Started having random blue, green or black screen crashes. Flashed to Ver 1.6 . This did not seem to help or make things worse. All drivers and Win7 were up to date. No problems running memtest or prime.
Next I setup a dual boot with XP sp3 32bit. Also went from the onboard sound to Soundblaster. XP runs fine with no crashes. Have had this setup for about a month.
Today, set ram back to 800mhz. Still getting the crashes in Win7. Most time crash starts with mouse lock and audio stutter if music is playing, this lasts for about 1 to 2 secs then screen goes green or light blue/white or black. Then have to hit reset. PC will then reboot to option for safe mode but loses wireless mouse and keyboard, has to time out then will load windows and mouse and keyboard will start to work again.
I downloaded the latest beta bios but did flash yet....I hate flashing the bios.
Any help will be appreciated....
Thanks,

Quote
All I can say is don't mess with flashing BIOS again as 1.6 seems to be just fine for the rest of us with P45 Plat
Unless you have 4 sticks of matched RAM. Which there is a bug in 1.6 that causes the chipset to be confused about the size of the RAM sticks and you end up with 5 memory slots and 12GB of RAM.
Also, the newest beta compared to the 1.6 final is far better in RAM performance. I am seeing 33% Bandwidth increase and greatly reduced latency in my overclocks.
But down to the real matter.. The major culprit is almost certainly the dedicated sound card.

Similar Messages

Print servers and printers problems on Win7 and Win8

Hello,
We have some computers, working on Windows operating system in the office: a few forking on the good old XP sp3, one running on the Win7 x64 home edition and one running on Win8 professional (the last one installed for new OS testing purposes)
During last two months I have tested a few print servers attempting to find one which can work with Windows 7: Trendnet, Synology, and D-link print servers. However, unsuccessfully. Here is the result:
   1) Any print servers is working perfectly with WinXP sp3 (full printing and MFP function support, easy configuration and access, successfully scanning and printing operations in 100% cases)
   2) No one print server is working correctly with Win7 home x64 (mostly successful installation but complicated and unclear configuration; printed pages often is missing, no scan support for MFP.
   3) There is a little bit better situation with Win8: 100% printing support on the same equipment but no scan support for MFP
Could you please help me with followings:
1) Could you please help me configure print servers and printers on Win7 x64, including printing and scanning support?
2) Could you please help me configure scanning support for Win8?
Please find full list of affected hardware bellow:
1) Machines, running on Win XP: Panasonic CF-29, CF-74, HP Compaq dc7600, some Acer laptops;
2) Machine, running on Win7 x64 home: Asus UX21, (OS probably was preinstalled on the factory)
3) Machine, running on Win8 pro: Lenovo X200 tablet
4) Printer HP LJ1020 with drivers for XP and Win7, x86 and x64
5) MFP printer Canon MP600 with drivers for XP and Win7, x86 and x64
6) Print server: D-link DPR-2000
7) Router: Cisco RV042G
All the machines has correct drivers installed, all the printers supports all the services if connected to computer directly. I have made all possible steps solving mentioned problems, including automated problem solving wizards on Win7.
Thanks in advance for your support

Hi,
Regarding the printer configure issue, I would like to share the following article:
Managing Printers and Print Servers
http://technet.microsoft.com/en-us/library/cc754769.aspx
According to the scanning support for Win8, it is better to post this issue in Windows 8 forum for more help.
Regards,
Vincent Wang
TechNet Community Support

Problems with hp deskjet 870 Cse and Win7 64 bit drivers

I have been using this printer for years without problems. WinXP and Win7 working fine on my 32 bit laptop.
Recently upgraded to a 64 bit laptop and the drivers installed just fine however the danged thing doesn't print.
Even the 'test print' job hangs in the print queue showing a print error.
Not sure this is related but,
The Windows application log shows a bunch of error messages source 'Bonjour Service' at about the time I was trying on my 64 bit machine:
Task Scheduling Error: Continuously busy for more than a second
Task Scheduling Error: m->NextScheduledEvent 998
Task Scheduling Error: m->NextScheduledSPRetry 998
this cycle repeats over and over again
Task Scheduling Error: m->NextScheduledSPRetry 13728
I notice that many people have been having problems over the years with Win7 and HP printers.
I don't know whether to swear off of HP or windows. So far, I am just swearing AT them both.

Hello bz2012,
Welcome to the HP Support Forums!
I see you are having issues printing with the Deskjet 870 since upgrading to Windows 7 64-bit. You could attempt to add the printer with an alternate driver.
Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection.
The printer driver you would more than likely be best to use is the 9800. Let me know if this allows you to print.
Using the Print and Scan Dr may also be a helpful means of troubleshooting / resolving the issue. Let me know what the results are, what passes, fails, etc.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Share iTunes Library between OSX and Win7 Bootcamp

I've done quite a bit of research on this but I still haven't found a solution that does what I require.
Basically my setup is a SSD & HDD in my MBP. I have OSX and Win7 (Bootcamp) on the SSD and the NTFS HDD is a shared file storage drive for both Windows and OS. I have my iTunes library located on this drive and I want to be able to share the library between the OSs. I also want changes e.g. additions deletions made in windows to be reflected in OSX and vice versa.
Technically this is possible and does in fact work if I point iTunes to the .itl file but the problem is that when I open iTunes after switching OSs it must go through a very lengthy library update which can take 30-60mins in some cases before I can use it. Obviously this is not a good solution so I'm wondering if there are any workarounds to accomplishing this?
For example can I duplicate the .itl file and have one for win and one for OSX and still have the libraries stay in sync?

Just for your info, Vista ***** whatever you try to do. I'm stuck with Vista on a pre-installed laptop. All experience I have from Vista is bad, don't buy Vista or a computer with preinstalled Vista if you can avoid it.
We have three computers in a home network, one Macbook Pro, one PC with Windows XP, and the Vista laptop. All are using iTunes-8, downloaded and installed last week.
Sharing iTunes libraries using the option to share libraries on a local network works fine between Mac and Windows-XP. The sharing also works fine between the XP and the Vista PC.
But the Vista PC can't access the Mac iTunes library. When trying to open the Mac library, iTunes on the Vista computer says something like "Fetching library info from...". It's the same problem when trying to access the Vista library from the Mac.
We had a similar problem when trying to access shared folders on the local network. Thanks to a tip on this forum how to tweak the Vista registry, the shared folder problem was solved.
I'm think some registry setting in Vista might solve iTunes shared library problems. Maybe some Windows freak knows how to patch the registry to solve this issue.
Otherwise the solution is to trash Vista, and install Windows-XP.

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option advanced is checked, when forced to calibri this behaviour doesnt occur An aexample of that is

I have FF and win7. Fonts turn to weird characters at more then 75% zoom when the checkbox "allow webpages to choose their own fonts" in the contents option > advanced is checked, when forced to calibri this behaviour doesnt occur
An aexample of that is the product title on the product of this website:
https://www.xstreetsl.com/modules.php?name=Marketplace&file=item&ItemID=2424553
While switching to double check this I just saw that this also happens in this very window in wich i am typing my question now. If i copy and paste this text to for example notepad or anything else, it shows up like normal text.
== This happened ==
Every time Firefox opened
== i installed firefox on win 7

This issue can be caused by the bitmap version of the Helvetica or Geneva font or another (bitmap) font that can't be displayed by Firefox in that font size.
Firefox can't display that font in the specified size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or find a True type version of that font that doesn't have the problem.

Mic problem of windows 7 on a MacBookPro and wireless problem with macosx

recently, I installed windows 7 on my MacbookPro, it is MBP985(which has a sound card from Cirrus Logic).
everything works well but two things:
1)the first is about the microphone. The mic works, it even can be used with "windows speech recognition" which is complex use of the mic.I also can use the sound recorder and playback the sound.
but I just cant use the mic for skype or OICQ(a popular instant messenger in china), i dont know why but i'm sure this can be fix in some proper ways.
before that ,i try a lot, but just cant get it work.
i need some help!
2)it is about the wireless (or wifi issues). I can access the network easily both macosx and win7 wiht my home wireless router, but with the macosx, it drops frequently, diagnostication always ask me to restart the router. I living in a house with 7 bedroom, that means i'm not the only one use the netwrok, so i cant restart the router so many times. So i'm dispported by macosx a little bit in this case(windows never give me this problem to me).i just dont know how to fix it.

another problem, when in college, it is another situation.
my college is Sheffield Hallam University. SHU provide wifi in various of area. \
Macosx can easily access the net but the windows not, so i'm so confused by these situation.
Fortunately,I'm lucky have two different lastest OS on my macbookpro, if one of them have some problem i can switch ot another quickly.
But I definitely need some help with those things, if some can give me some advice i do appreciate it!

Adobe reader x, and win7, sha-1 instead of sha-256

Good afternoon,
i have a problem similar to that posted at
http://forums.adobe.com/message/3707345
i try to sign the pdf (enable for signing with adobe livecycle ES, Right Managements)
but it always is signed with hash algorithm SHA-1
The hardware vendor of the smartcard, says that the problem is an adobe problem, because signing the file with its legacy software all works fine, and with its software the digest is SHA-256 (but the produced file is obviously not a signed pdf..)
For italian law the supported digest is SHA-256, and NOT SHA-1
I'm using the latest adobe reader version (10.1) and Win7
P.S.: adobe livecycle, enabling the pdf for signing with livecycle Right Management Service, put a sign with an adobe certificate and returns a pdf ready to be signed, and in this pdf the adobe sign is SHA-1
could be this the problem?
So, before signing the pdf it just contains an adobe SHA-1 sign (coming from livecycle web service)
With regards

Hi GP,
It's the smart card (or more correctly the software on the smart card) that is the bottleneck to getting to SHA-256. Here's what happens:
NOTE: When I say Acrobat I really mean both Acrobat and Reader
•    The user initiates the signing operation
•    Acrobat asks the user to pick a digital ID
•    The user select a digital ID from the drop-down list on the Sign Document dialog and then clicks the Sign button
•    Acrobat needs to write the file to disk for security purposes (another issue) and puts up the Save As dialog
•    The user selects a file name and save location and Acrobat writes the file to disk and it's at this time two things happen:
    o    The signature appearance is created so it can be part of the signed data (what you see in the signature field is not the signature, but rather a pictorial representation of the signature)
    o    A hole is created in the file and filled with zeros as a place holder where the actual signature will be written
•    Acrobat computes the digest over the file, excluding the hole filled with zeros. By default Acrobat is using the SHA-256digest method
•    Acrobat needs to get the digest encrypted (signed) by the private key associated with the signers digital ID
    o    If Acrobat has access to the private key it calls on the RSA library to do the encryption,
    o    If Acrobat doesn't have access to the private key it sends the SHA-256 digest to the software that does have access to the private key... In your case that's the cryptographic software residing on the smart card
•    It's up to the cryptographic software to feed the 32 byte SHA-256 digest into its encryption algorithm and have the private key encrypt the digest
•    The software on the smart card cannot handle a digest as large as 32-bytes, so it returns an error
•    In Acrobat 9.0.0 and earlier once the error message was returned the signing process was aborted and signature did not get created. Starting with version 9.1 if a PKCS#11 (the specification for smart cards) error is returned Acrobat falls back to re-computing the digest using SHA-1 and starts the process again. It's here where the smart card software is getting the 20-byte SHA-1 digest and can get it encrypted using the private key.
•    Once the encrypted SHA-1 digest (this is really the digital signature) is computed the smart card sends it back to Acrobat
•    Acrobat in turn writes the signature into the hole it created in the PDF file, overwriting the zeros with actual hex values.
And that’s how you get a digital signature based on the SHA-1 digest method. If you absolutely need to use SHA-256 your only option is to get a newer smart card that can handle the larger digest.
Steve

New installatino of cs6 and win7/64: CS uses wrong AppData folder!

Hi,
strange problem: I installed Win7/64 together with CS6 "clean" on a SSD. But if I want to save a PDF setting in a .joboption file, Adobe uses such a folder:
i:\Users\XXX\AppData\Roaming\Adobe\Adobe PDF\Settings
But "i" is a blank partition/hard disk, my Users folder is on the partition C
What the hell is going on? A freh installation of CS6 and such problems?
How can I change this behaviour?
thanks, carlos

See the German forum.
Mylenium

Ipod Touch and Win7

Ipod Touch works fine with WinXP but when I transfer it to Itunes on Win 7 it syncs but will not replay the music. I have tried all combinations of win7 administrator rights, checked the Ipod settings, changed USB cables, erased Itunes and alll trace of Apple before reinstalling everything; but no luck. Is there an incompatability between the 2ng Gen Itouch and Win7 and ITunes 10, or another explanation?

You can try go to Settings>General>Reset>Erase all content and Settings and then try setting up the iPod again but from backup.
Or
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Since other iPods work OK that indicates either a software problem or hardware problem with your iPod.

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

I am making code to try to make a game and my problem is that my code......

I am making code to try to make a game and my problem is that my code
will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
Here is the code for my objects:
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class rockCrab {
     //Wounding formula
     double sL = 70;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 50;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     rockCrab() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          double done = rint(fH - fA);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("Rockcrab hit" +done);
import java.lang.*;
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Random;
import static java.lang.Math.*;
import java.awt.*;
import java.awt.color.*;
class self {
     //Wounding formula
     double sL = 1;                                   // my Strength Level
     double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
     double aB = 0;                                 // equipment stats
     double eS = (sL * bP) + 3;                         // effective strength
     double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
     //Attack formula
     double aL = 1;                                   // my Attack Level
     double eD = 1;                                   // enemy's Defence
     double eA = aL / eD;                              // effective Attack
     double eB = 0;                                   // equipment bonus'
     double bA = ((eA/10) * (eB/10));                    // base attack
     //The hit formula
     double fA = random() * bA;
     double fH = random() * bD;
     double done = rint(fH - fA);
     //health formula
     double health = floor(10 + sL/10 * aL/10);
     self() {
     void attack() {
          health = floor(10 + sL/10 * aL/10);
          fA = random() * bA;
          fH = random() * bD;
          done = rint(fH - fA);
          System.out.println("You hit" +done);
}Here is the main code that writes what the objects do:
class fight {
     public static void main(String[] args) {
          self instance1 = new self();
          rockCrab instance2 = new rockCrab();
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
          instance2.health = instance2.health - instance1.done;
          System.out.println("You hit: " +instance1.done);
          System.out.println("rockCrabs health: " + instance2.health);
          instance1.health = instance1.health - instance2.done;
          System.out.println("RockCrab hit: " +instance2.done);
          System.out.println("rockCrabs health: " + instance1.health);
}when the code is run it says something like this:
you hit 1
RockCrabs health is 9
RockCrab hit 7
your health is 38
you hit 1
RockCrabs health is 8
RockCrab hit 7
your health is 31
you hit 1
RockCrabs health is 7
RockCrab hit 7
your health is 24
you hit 1
RockCrabs health is 6
RockCrab hit 7
your health is 17
my point is whatever some one hits it always repeats that
my expected output would have to be something like
you hit 1
RockCrabs health is 9
RockCrab hit 9
your health is 37
you hit 3
RockCrabs health is 6
RockCrab hit 4
your health is 33
you hit 2
RockCrabs health is 4
RockCrab hit 7
your health is 26
you hit 3
RockCrabs health is 1
RockCrab hit 6
your health is 20
Edited by: rade134 on Jun 4, 2009 10:58 AM

[_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.

Remote and IR Problem

A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
MacBook Pro 1.83 GHz Mac OS X (10.4.9)

check out this thread. Seems to be the same problem.
http://discussions.apple.com/thread.jspa?messageID=4701905&#4701905

LG Ally text message and gps problems

hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
Master Reset/Soft Reset:
Factory Reset option 1
From the main screen, touch menu tab
Touch Settings
Touch Privacy
Touch Factory Data reset
Touch Reset Phone
Warning: This will erase all data from your phone, including:
Your Google account
System and application data and settings
Downloaded Applications
It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
Factory Reset option 2 - Warning this will reset device back to original factory settings.
Turn off the phone
Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
Once device displays boot information, release keys.
Soft Reset
Press the Power key.
Touch Power off.
Touch OK.
Press the Power key to power on the device.
or
Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
Please HELP!!!!!! Getting second thoughts on Lion!!!!

Hi b,
Have you restarted yet?

P45 and Win7 problems?

Similar Messages

Maybe you are looking for