P45 Diamond - Vista 64bit randomly freezes

After having many troubles  with the MSI model X48 Platinum and OCZ memory modules (couldn't synchronize), the shop has replaced (with no charge thank God) it with another model P45 Diamond. The problem now is that randomly the system freezes without a specific reason. All the values on the bios are set to default. Also I haven't overclocked or overcharged anything. I have also installed a Tagan PSU TG900-BZ (900W). The system either hangs randomly or when I try to play a 3d game.
Any ideas of what might causing the problem?
Regards,
George
the characteristics of my system are the following :
motherboard : P45 Diamond
BIOS ver. 1.50
VGA : MSI 9800 GTX 512MB
CPU : 9450 quad core
memory RAM :2x2GB Kingston DDR3 1333D3N9
HDD: Western Digital 500 GB
PSU : Tagan PSU TG900-BZ (900W)
OS: Vista Ultimate 64bit

Hi and thanks,
well I have updated 1 month ago the BIOS to 1.5v while now MSI support team suggest to update to 1.65 (from their ftp site which is not accessible from the official site)which I did some hours ago. The Ram modules are Kingston KVR 1333D3N9/2G (2GB PC3-10600 CL9 240-Pin DIMM).I As I said all the values in the BIOS are set to default meaning that the voltage is by default 1.5v (from what I saw from Kingston documentation the voltage can be adjusted to +-0.075v). I tried to raise the voltage within the recommended values but the result was the same, randomly freezes. I have adjusted the vistrual memory, do I have to change it from within Vista? The only thing I haven't tried also is to change the VGA card.

Similar Messages

  • ITunes 9 on Vista 64 - Randomly Freezing and Recovering

    I have a strange problem since upgrading to iTunes 9 on my machine, and my searching thus far hasn't found a fix to my particular issue.
    I upgraded my Vista 64-bit PC to iTunes 9, and since doing so have a strange problem occuring, especially during video playback. Anytime I start a video podcast or movie, the video will freeze in the first 10 seconds, and stay frozen for about 45 seconds... then it'll continue and work fine for the rest of the video. Playback must be continuing in the background, because when it 'unfreezes', it's about 55-60 seconds in or wherever it should have been if it had been playing straight through. In addition to this, iTunes will sporadically appear to hang during general usage (switching a song, adjusting volume, etc), but again will recover about 30-45 seconds later. Music playback is unaffected by this (the song will keep playing even if 'frozen'), but video is, and it's SEVERELY annoying. The freezing outside of video playback seems random, but it ALWAYS freezing within 10 seconds of starting a video/podcast... and it always continues after about 45 or so seconds.
    Other than the above issue, iTunes does still work, and so does my iPod/iPhone syncing, etc, but even those actions are occasionally subject to iTunes lagging, as described above.
    I had been running the latest revision of iTunes 8 on this same PC with no issues at all - this all started directly upon updating to iTunes 9. No other changes were made to the system that could explain this, in my opinion.
    Quicktime does not appear to be suffering from the same issue, and I've yet to upgrade my laptop for fear of having the same problem there.
    System is... AMD Phenom 9850 Quad-Core CPU, 8GB RAM, Nvidia GTX260 Video, SoundBlaster XFi Titanium Sound. OS = Vista Ultimate 64-bit SP2 with all updates done, and I have the latest Nvidia and Creative drivers installed for my hardware.
    I've tried completely uninstalling/reinstalling iTunes, and this didn't solve the issue. I'm using the 64-bit iTunes installed, and had no issues with installation.
    Anyone have any thoughts?
    Thanks for your time!

    I have the same problem as all of you, I am on Vista x64, iTunes 8.2 had no problem working with my 30000+ library.
    THE FIX: REVERT TO 8.2 because 9 obviously is made to ** us off.
    Here is how you can get back to a workable state:
    -UNINSTALL iTunes 9
    -Install iTunes 8.2: http://bit.ly/tDsGB
    -When you start it, it will tell you your Library was made using a newer version. Ignore it and click OK.
    -Start iTunes 8.2 (again) and HOLD the Shift key when loading and select your library from the "Previous Music Libraries" folder (it will be in your Music folder and is named the exact date you installed iTunes9)
    Then your done, and you can actually listen to music.
    Hope this helps someone!!!
    [email protected]

  • P45 Diamond Constantly Freezes Or Restarts

    I've build up my system this weekend and everything is powering up nicely with no beeps, CPU running at a good temp, drives are detected in BIOS. However my system at some points contantly freezes or restarts. I use Vista x64. I experience similar results with clean version of XP in x86 & x64 versions. I've tested the GPU, PSU, & HDD and everything works fine but I'm still worried it may be a hardware problem of sorts. I've updated BIOS, clear CMOS a few times, but system still freezes.
    1.Vista & XP freeze randomly in 1-5 minutes, sometimes restarts, or simply shuts down & I can't power it up again until I reset motherboard
    2. The Memtest86+ V2.0 doesn't find any problem
    My configuration:
    MB: P45 Diamond
    Memory: CORSAIR DHX 2048Mb 1600Mhz KIT cl9 2 x
    CPU: Intel Quad Q9550
    GPU: N280GTX-T2D1G-OC
    HDD: WD Velociraptor

    Hello Urk,
    what is your current BIOS-Version?
    Quote
    CPU: Intel Quad Q9550
    Which one:
    Q9550, C1 (95W)....sSpec Nummer = SLAWQ [supported since BIOS Version 1.0]
    Q9550, E0 (65W)....sSpec Nummer = SLACQ [supported since BIOS Verssion 1.3]
    You can check the sSpec Number on the CPU itself or on the Intel sticker on the CPU box:
    Quote
    2. The Memtest86+ V2.0 doesn't find any problem
    How long did you run Memtest86+?  Did each of the ten different test run at least once without errors?
    Quote
    Memory: CORSAIR DHX 2048Mb 1600Mhz KIT cl9 2 x
    Test with each memory module seperately.  Clear CMOS with main A/C power cable removed from PSU, load Optimized Defaults in BIOS and test with the following settings:
    FSB Frequency = 333 MHz
    FSB/DRAM Ratio = 1:1.6 [->> DDR3-1066]
    Memory Voltage/DRAM Voltage = 1.6V
    Spread Spectrum = Disabled
    Auto Disable DRAM/PCI Frequ. = Disabled
    Quote
    CPU: Intel Quad Q9550
    GPU: N280GTX-T2D1G-OC
    HDD: WD Velociraptor
    What PSU are you using? 
    -Brand?
    -Model Name?
    -Amperage limits (A) on all main voltage rails (12V, 5V and 3.3V)?

  • P45 Diamond won't load Vista or anything!!!!!

    Hi,
    After spending about 300 bucks on this board and several hundred dollars in diagnostics, and 2 weeks myself trying to get my system to just run... I am at the end of my tether.
    Vista Ultimate x 64 (bought the disk) won't load, and BSOD after the pretty circle logo.
    I updated the bios to present one. The crashes don't even get to the ATI crashes (ATI.DKG errors)
    I've tried all the tricks like 1 stick of ram, video card only in 2nd PCIE slot, millions of memtests (all passed)
    I would post the errors, cept I can't open windows :(
    My setup is P45 Diamond Motherboard
    2 Seagate 1TB hard disks
    8 GB of DDR3 ram (2 sets) (Corsair xms3-1333MHz 1.7V CM3X2048-133c9dhx)
    2 visiontek ati 4850 video cards
    Intel Q9550 processor
    Power supply is 1000W Silverstone Strider Series
    I did my homework and made sure the ram, videocards and processor were compatible. Don't know why it doesn't work, nor anyone else.
    Is this board garbage or what?
    Any suggestions would be greatly appreciated.

    I h
    - reduce memory clock speed to 1066 MHz by manually choosing the corresponding FSB/DRAM Ratio
    - raise Memory Voltage to ~1.58V
    - Disable Spread Spectrum
    - Disable EIST
    - Disable C1E Support (CPU Features)
    - Disable everything that you do not need for installing an operating system, that is:
    --> USB Controller (use PS/2 Keyboard) (tried both ps2/ and usb)
    --> USB Device Legacy Support (disabled)
    --> Onboard LAN Controller (disabled)
    --> Onboard 2nd LAN Controller(disabled)
    --> LAN Option ROM (disabled)
    --> Onboard IEEE1394 Controller (disabled)
    --> Onboard E-SATA Controller (disabled)
    --> Extra RAID/IDE Controller (disabled)
    --> COM Port 1 (disabled)
    --> (Green Power [Energy Save, CPU Phase Control, DDR Phase Control, MCH Phase Control]) - removed it, ran it as 24 pin direct as well)
    --> disabled aoip in bios as well.
    There are kernel crashes in win xp 32 , xp 64 bit, vista 32 bit ultimate, vista 64 bit ultimate (bought 2 disks to date  ) debian, knoppix, Kbuntu, Ubuntu as well.
    retested my ram , CPU at today at a highly priced and well respected shop today as well.
    Corsair engineering stated they tested compatibility with this MOBO, but when retested today couldn't seem to get it working..... ???
    Additionally, the ram states 1.7v @ 9-9-9-24 settings for optimum. the board defaults at 1.5 v (10666). these are true 1333 MHz chips, and the actual voltage is 1.6 volts with a manual setting at 9-9-9-24 (as per corsair engineering).
    They did test an XMS3 DDR3 module, but it was only the 1G x 2 set. They stated compatibility for the 4 GB (2x2GB) set due to the chip architecture alone it appears.
    Silly me for wanting to run 8 gigs on a 64 bit system...
    This board appears to have great -promise, but looking at the returns at Fry's, makes me wonder why MSI doesn't get off their ass and make drivers to work with all the main rams and cards.
    That's how the big board manufacturers used to do business, now they just don't care. 
    BTW the Visiontek 4850 cards crash randomly with the ATI.DKG Driver with this card.
    ATM, I am stuck with dual 4850s - those are going to join the P45 Diamond in the garage (decided not to throw them away as I dumped $368 (with a 2 year warranty on the MOBO) and cannot return it as it is well past 15 days at the store  , perhaps MSI will make drivers for compatibility, world peace is achieved, and the cure for cancer is found (most likely to occur first)
    I might try another MSI product in the future, but my friends (who want me to build clones of my system) do not want this board after the extend of trouble I have gone through.
    Looking at EVGA and XFX at the moment, as ASUS is having a 60% return currently (poor manufacturing practices).
    Thank You All for all the assistance in trying to help me resolve my problem.
    this is by far the most helpful forum I have ever been on. I will keep looking, and of course trying trying to get this board running in my spare time in another system, but have run out of time in trying to get my office system running, so I am sending it to a shop so I can use this overpriced ram and flawed crossfirefire system (let someone else deal with the headaches). I am still interested in the OC features on this board, but really - "Green Power for an COD board is like trying to soup up a 4 cylinder for speed and gas mileage lol.  Cheers and Have a Great Day!!!

  • IPod 80GB freezes my Vista 64bit totally

    I upgraded my PC recently and now I'm running Vista 64bit. Installed latest iTunes and connected my iPod. It installed something for short while and then was just supposedly looking for some driver (install icon spinning on task bar) never getting anywehere. Finally I removed my iPod as nothing else helped.
    Now whenever I plug in my iPod it is recognized as USB Mass Storage Device under devices. If iTunes was running it freezes, if not, it does not start up. If I go to My Computer, iPod prevents any other USB mass storages from showing up and freezes My Computer too. I've tried uninstalling USB Mass Storage Deveice (iPod) under devices but that too freezes up never completing.
    If I shut down iPod service in computer management, it at least lets me see my iPod with correct name under My Computer along with other USB removal storage devices (the USB hub in my monitor). When I try to access my iPod through My Computer it crashes again.
    When I unplug my iPod, everything I was trying to do suddenly goes through and iTunes opens.
    I cannot uninstall anything iPod related while it's connected and the entries are gone from under devices when it's not connected.
    What is wrong?

    Have you heard anything on how to fix this issue? I'm having the exact same problem.

  • P45 NEO-3: Random freeze,boot and disk error

    Hello,
    Running windows 7 64 Ultimate
    3 different errors:
    1: "A disk read error occurred Press Ctrl + Alt + Del to restart"
    2: Random freeze when using the pc
    3: Can't find booting device or something
    it's random .. sometimes working 1 hour and problem .. sometimes (like now) no problems 20 hours+
    I have this PC over 1 year and the problem started 3 months ago.. I've bought new HDD Western Digital 1TB
    My specs:
    MB MSI P45 NEO3-FR S775
    DDR2 2x2GB 800 Kingston
    CPU Desktop Core 2 Quad Q9550 2.83Ghz
    VGA PCX XFX 8600GT 250MB DDR3 DVI
    Fortron 400w Power supply
    DVD LG 20x GH20NS10 Sata
    Can someone help me with this?
    Is this a hardware or/and software problem?
    Thanks

    What is your current BIOS Version?
    Quote
    Fortron 400w Power supply
    What is the exact model name of that PSU? How many +12V lines does it have and what is the amperage limit on each of them? (Look at the sticker on the PSU).
    Quote
    DDR2 2x2GB 800 Kingston
    What is the exact model name/number? (There should be a sticker on the modules telling you that.)
    What is the brand & model name of your hard drive?  Go to the manufacturer's product site and look for a diagnostic utility for DOS.  Then use this tool to do a full check of your hard drive.
    what kind of hard drive are you using?
    Quote
    Running windows 7 64 Ultimate
    Are we looking at a "fresh" installation you put on for your current hardware configuration or is it an installation from an older system with different specifications?

  • P45 Diamond Freezes with 4 ram modules

    Hi there
    I have a problem. My pc keeps freezing when I have 4 memory modules in. I have changed the timing settings. Set it to the auto, exactly as specified by the memory itself. When I put 2 modules in it works. I have run memtest and it passes for an entire day. I have also tested other memory and it does the same.
    My Specs are as follows:     P45 Diamond
                                          Intel Q9400 CPU
                                          Zalman 1000w Power Supply
                                          MSI GTX260 216 OC
                                          Bios Version - 1.5 (tried 1.6b7 as well)
                                          Corsair CM3x1024-13339DHX x 4
                                          Soundblaster X-FI Platinum
                                          WD 320gb,500gb,1tb HD's

    Check the Intel Specifications for the P45 Chipset:  DDR3-800 and DDR3-1066 only, no sign of DDR3-1333 in there.  Two sticks @DDR3-1333 are usually no problem, however, 4 sticks may become problematic here.

  • P45 Diamond Freezes/restarts

    I recently purchased this board P45 Diamond, it first hanged on me during xp installation and i discovered it was faulty memory so I return it and they gave me a new batch Kingston DDR3 1333 2GB.
    So I got the system up and running, after about it is switched on about a day or say I would come home and see it restarted. So ten I put in that green power Genie, And then after about a day it freezes.
    https://forum-en.msi.com/index.php?topic=117984.0
    I saw they changed the ram speed i will give it a try and see what happens.
    Please let me know if there is any suggestions.
    Or with what programs i could run some tests.
    P45 Diamond
    Q9300 core 2 quad
    2GB DDR3 1333 kingston
    700W Raidmax PSU
    8600GT XXX 256mb DDR3
    500 GB SATA Seagate
    2 x 320 GB SATA Seagate

    I know what it says on the product site.  DDR3-1600 actually carries and *(OC) tag and actually DDR3-1333 should as well. It must be a mistake on the site.
    http://global.msi.eu/index.php?func=proddesc&prod_no=1478&maincat_no=1
    Quote
    • Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600* (OC) SDRAM, 8GB Max
    I am talking about Intel specifications and they clearly state that the P45 Chipset natively supports DD2-667/800 and DDR3-800/1066:
    >>Intel® 4 Series Chipset Family - Datasheet: For the Intel® 82G45, 82G43 Graphics and Memory Controller Hub (GMCH)and the Intel® 82P45, 82P43 Memory Controller Hub (MCH) [June 2008]<<, page 27:
    [click image to enlarge it]
    Quote
    had to change it so my ram runs at 1066 not 1333
    Quote
    2GB DDR3 1333 kingston
    Can you provide a link to the datasheet of these modules or post the model/serial number? (example: KHX8500D2K2/2G )
    Also, please make a picture of the CPU-Z "SPD" view and post it here.  It may help to find the proper settings to stably overclock to DDR3-1333.

  • Possible P45 Diamond Faulty MOBO

    First, system specs:
    VGA:HIS Hightech H485F512P Radeon HD 4850 512MB 256-bit GDDR3 PC
    Monitor:Acer P243WAid Black-Silver 24" 2ms(GTG) HDMI Widescreen LCD
    MB:MSI P45 Diamond LGA 775 Intel P45 ATX
    OS:MS Windows XP Pro 64-bit
    Browser:Firefox
    CPU:Intel Core 2 Quad Q9550 Yorkfield 2.83GHz LGA 775 95
    Sound:Creative SB X-Fi Xtreme H/W Audio Card (MS-4132)
    Memory:OCZ Special Ops Urban Elite 4GB DDR3 1600
    PSU:CORSAIR CMPSU-620HX 620W ATX12V v2.2 and EPS12V 2.91 SLI Cer
    Brand:Mine
    HD:Seagate Barracuda 7200.11 ST31000340AS 1TB 7200 RPM SATA 3.0
    Cooling:ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler
    Misc: Plenty of case fans
    Here is the story:
    I originally built this system late August with hopes it would be an awesome gaming system.  Since day 1 however, it has frozen randomly.  It either hard freezes, or abruptly reboots.  As of now, there is no overclocking, and the system is set at all defaults.
    I have done the following:
     * Tried a new, larger power supply
     * Ran memtest for almost 24 hours with no problems
     * Tried XP and Vista (both 64-bit)
     * Removed ALL unused components.  Left only video card.  Even unplugged CD-ROM drives
     * Tried another keyboard (not mouse, but mouse had no problems on previous system)
     * Downloaded all of the latest drivers (first thing I did)
    When I Prime95 & SuperPi simultaneously, the system freezes.  Sometimes instantly, sometimes after 10 minutes.  When not running stress test programs, it freezes seemingly completely randomly.  I have run Hardware sensors monitor while running stress test software, and CPU temp PEAKS at 53.  72 is supposed to be safe for this proc. 
    I am ready to throw this out the window... any more suggestions?
    Oh, and no weird entries in the error log. 

    Yep, still crashes.  I have been lowering it, but not that low until you said to.  I am updated the BIOS AGAIN.  Apparently there are two 9550 CPUs listed, with different CPU Codes (whatever that is).  There was one released in October that says its for my processor... even though my proc was supposed to be supported in 1.0. So anyway, I REALLLLLY hope the BIOS update does the trick.  This is SO frustrating.   

  • MSI GD65 - Win7 64 Prof. Random freezes

    Edit: Setting DRAM Voltage to 1.65V instead of 1.5V seems to help a lot!
    Edit: BIOS 1.6 is giving hopeful results for automatic OC (Genie) too.
    In an attempt to aggregate the information on this, topics that seem to be related (to me):
    https://forum-en.msi.com/index.php?topic=133870.0
    https://forum-en.msi.com/index.php?topic=133680.0
    https://forum-en.msi.com/index.php?topic=133585.0
    https://forum-en.msi.com/index.php?topic=133626.0
    https://forum-en.msi.com/index.php?topic=132681.0
    https://forum-en.msi.com/index.php?topic=132105.0
    https://forum-en.msi.com/index.php?topic=131535.0
    https://forum-en.msi.com/index.php?topic=131457.0
    https://forum-en.msi.com/index.php?topic=131466.0
    https://forum-en.msi.com/index.php?topic=131162.0
    (I only included GD65-topics)
    Low voltage memory reading material:
    http://www.evga.com/forums/tm.aspx?&m=5080&mpage=1
    ______ Original post __________
    Like others I've been plagued by random freezes in using my newly built system, based on the GD65.
    What happens:
    1/6 times BSOD and restart.
    5/6 times a simple freeze, with, if present, (analog) sound output relooping the last second of output or producing a more garbled stream of sound.
    When does it happen:
    - 1/5 times when doing nothing (save for uTorrent running in the background). I.e. returning to my machine, it won't respond to input, or if the screen has stayed on, shows the machine to be in a frozen state.
    - 4/5 times when browsing, and especially when watching flash-based movies (flash 10.1 prerelease). That might be a biased memory, though, as these freezes always produce very _memorable_ sound relooping.
    The system can be stable in continuous operation (including uTorrent) from anywhere between 1 hour to 4 days, before the abovementioned occurs.
    The system:
    - MSI P55-GD65 (Foxconn socket, BIOS 1.5)
    - i7 860
    - 2x 2GB Corsair Dominator 1600MHz CAS 8 --> CMD4GX3M2A1600C8 (DIMM1 and DIMM3)
    - Corsair HX850W
    - Intel 80GB Intel X25M 2,5" SATA (IRST 9.5 drivers installed)
    - 2x Samsung 1000GB Samsung HD103SJ
    - Windows 7 64bit Professional (on SSD)
    I've tried the following:
    - Reseating the CPU.
      As far as I could see there were scuff marks on all pads and in the socket, no pins were bent or seemed abnormal. I must say that during the reseating I was struck by the very shoddy-feeling latching mechanism.
    - Varying BIOS settings. Many, from the most default to custom OC, to OC Genie based settings. Interestingly, the non OC'd settings seemed to perform the worst.
    Looking back into the various BIOS profiles I stored, I see that I haven't tried (d'oh!) the combination of:
    - A higher DRAM voltage
    - Relaxed DRAM timings
    - Standard base clock
    I'm going to try this and see if that will make my system run stable. I'll update somewhere later this week.
    In the meanwhile, I'm very interested as to what people think concerning the times at which the freezes occur (for me and for quite a few other accounts I found scattered around). From what I can gather:
    - These freezes almost never occur when the machines are stressed.
    - They seem to occur more frequently when users are using their browsers.
    - Vista and Win7 seem to suffer from more freezes than XP installations (there is an account of a dual-booting guy stating this) with XP installations generating more BSODs instead of freezes.
    - Memtesting generally reveals no issues whatsoever, nor does prime95-testing.
    I can't get my head around this behaviour. You'd expect that with hardware that is on the edge, when it comes to margins in voltages and timings and what not, stress testing would surely push it over that edge. Are we dealing with voltage fluctuations or certain patterns of memory usage that cause these issues?
    Again, very interested what your take is on this.

    Hi everyone! Let me contribute in diagnosing the problem.
    I've bought P55-GD65 in november'09 (BIOS version 1.0) along with OCZ DDR3-1600 Gold 2*1Gb Kit. Installed Win7 32-bit. Every few hours I was getting BSOD with something like "BUGCODE_USBDRIVER". I thought this was Windows fault, that's why I've tried Vista SP2 (error at first boot) and XP (hang while copying files). In Win7 several times I've seen corrupted screen, Aero switching off and sluggish performance.The error became less frequent when I set memory to 1333Mhz and raised voltage to 1.65v as there was only 1.5v in the SPD. And there wasn't dependency whether one module was used or both two — BSODs were inevitable.
    Later I've tested one Rendition 2Gb DDR3-1333 module. 1T or 2T — infrequent BSODs/freezes.
    I've upgraded to BIOS v1.4 and installed two ordinary Hynix 1333Mhz CL9 modules. A new BSOD "IRQ NOT LESS OR EQUAL" began to appear along with these weird freezes roughly twice a week. My PC became more usable and I decided to keep Hynix memory.
    Two months with BIOS 1.5 were stable - only 2-3 BSODs, but I think that were application errors or faulty ATI driver. Memory was operating 1333@[email protected].
    BIOS 1.6 brought back freezes. 3-6 times a week. The only positive aspect: 3.24 Gb was available for Windows against 2.99Gb in previous BIOS versions. 19.02.2010 I updated to v1.7. So far no freezes, errors.
    Short resume
    Freezes and errors are appearing in Win7 32-bit with BIOS 1-1.4 & 1.6. Memory voltage, frequency can affect the periodicity of errors. I haven't tried OC Genie yet because of unstable PC operation in normal mode.
    My observations
    Many hardware sites stated that there's no need for any cooling sinks or heatpipes for P55 chipset and any cooling system of tested mainboards were slightly warm. In my case, the heatpipes and sinks are hot most of time. Maybe this is a result of stock Intel cooler (2cm height)?
    Also 6 power LEDs are constantly on, slightly blinking when watching HD video.
    In 3D games (GTAIV, Mass Effect2, Tropico3, Burnout, Red Alert3) even for many hours playing — no freeze or BSOD.
    The computer normally goes to S3 (hibernate) and resumes for several times a day.
    The temperature of individual components is within reasonable limits.
    I can confirm that after browsing FLASH-rich websites you should expect freeze in 30min. This time shortens while watching fullscreen avi-files afterwards.
    My config
    Windows 7 32-bit Ultimate
    Intel Core i7-860 (stock cooler) /MSI P55-GD65 / Hynix 2×2Gb PC3-10600 / Sapphire Radeon HD4850 512Mb (reference) / Samsung HD501LJ, SP1614C / LG GH20LS15 / K-World TV878RF Pro / Chieftec CFT-560-A12C / CoolerMaster Cosmos S
    HP LP2475w / Logitech MX Revolution / Genius KB21e / Canon Pixma iP4000 / Wacom Bamboo Fun A5
    It seems to me that there's some electric power issue in P55-GD65. Maybe it's related to MOSFETs overheating? Or weird Vdroop setting? Or, the worst, critical fault in the board design? Or we've got defective samples...

  • Windows7, can't install, random freezes.

    Hey!
    Just got a new computer, It worked fine in the beginning, no trouble installing Windows 7 Ultimate (32bit). After ~1 day random freezes started... I tried reformatting and reinstalling Windows 7 but the problem came back.
    I tried reinstalling one more time but now I can't even install W7. It freezes at random points all the time, sometimes before the installation begins, sometimes when I chose which hdd to use, sometimes while expanding files.
    Now I use Windows XP and it runs fine without any freezes but I would like to use W7...
    I've tried a different PSU, GFX, DVD-reader and HDDs without any luck. 1 DDR3 in DIMM1 doesn't help, tried them both single channel.
    -::- resetting CMOS and I've updated to BIOS 1.4, the problem is still there... but it works like a charm in XP.
    -::- 3 different Windows 7-versions (2x32bit 1x64bit) and also Vista 64bit doesn't work (haven't tried 32bit, but I'm sure it won't work)
    -::- installing Windows 7 via USB-hdd and it doesn't boot (on my other computer it does, so it's bootable and I'm not doing it wrong)
    -::- change from IDE to AHCI setting in BIOS, GreenPower Phase Control(From Auto to Disabled), Intel Turbo Boost Disabled
    -::- with only PS2 Keyboard plugged in, no other device, I have nothing in the PCI-slots and not the MSi THX Quantum Wave blablabla connected...
    -::- different SATA ports both blue and black, tried IDE DVD-reader.
    -::- change DRAM voltage to alot of different values, max 1,65V min 1,4V
    -::- load fail safe bios settings
    NOTHING OF THIS WORKS... please help me:-)
    My system:
    MSI Big Bang Trinergy Intel P55, Socket 1156
    Intel Core™ i5 Quad Processor i5-760 Quad Core, 2.80Ghz, Socket 1156, 8MB, 95W, Boxed w/fan
    Kingston DDR3 HyperX 1333MHz 4GB KIT w/2X HyperX 2GB DDR3, CL9, 1.6v
    Sony Optiarc DVD±RW burner AD-5240S DVDRW 24x, DL, SATA, Bulk, Black
    Western Digital Caviar® GreenPower™ 1TB Sata 3 Gb/s, 64MB Cache
    Corsair SSD Force Series 2,5" 40GB SATA2, 280MB/270MB/s read/write
    ZOTAC GeForce GTX 460 1GB AMP PCI-E
    Cooler Master GX - 650W
    http://www.coolermaster.com/product.php?product_id=6642&category_id=3570
    Any suggestions;D?

    Quote from: Jack on 16-December-10, 00:56:52
    The symptoms don't make much sense, to be honest.  Strange scenario you have there.  If there was a hardware problem, it would show itself in XP as well.  On the other hand:  When the system freezes on the Windows 7 Setup level for no apparant reason, it is hard to even blame driver problems of any sort.
    Run Memtest86+ to be sure that there are no obvious memory problems behind this. 
    Also, disable ALL power saving features in BIOS Setup (C-States, EIST, C1E Support, Greenpower/APS features of the board) and also Spread Spectrum. 
    Have you tried running any more intense stress test applications under XP (Prime95, 3D Mark, Furmark) to check if you can trigger freezes by stressing the components somewhat more?
    Do you have any other components to do some swap-out tests (e.g. different memory modules, PSU, video card, CPU)?
    I've already ran Memtest and it showed nothing, forgot to write that above:p
    Gonna try all powersaving features disabled now and if that doesn't work I'll do some stress tests with XP.
    I have PSU, video card, and some hdds. No memory or CPU with same socket...
    BTW:I t started Expanding Windows files and its at 26% atm:D:D:D:D:D::D:D

  • Not able to install live update with vista 64bit

    I got a MSI P45 NEO-F board with Intel 2 duo E8400 processor, and VISTA 64bit.
    I'm not able to make the live update work, the CD-ROM following the card does support vista, but not the 64bit version. After having tried updating everything else to make my computer stop crashing when playing Age of Conan, I would like to see if an update of the bios will help. I would rather use the MSI updater than do it my self, as I don't want to take the extra risk.
    I've checked core temperature, RAM temperature, memory leak seems not to be the issue either, and I got the last driver for my videocard (v8.9 for Radeon HD 4870 512MB). At any given time the sound loops, picture may freeze and pixel or just go to brown stripes, and I then need to force a reboot. Some times the system has BSODed by itself as well.
    Current BIOS is v1.1, I think there is a v1.5 now.
    Is there a live update supporting vista64? Or a receipt for dummies how to do it manually? The AMI BIOS Flash procedure following one of the BIOS-versions that I *think* I can use doesn't include an explanation for vista.

    Quote
    2x2GB DDR2 RAM CL5 Dimm's (Corsair TWIN2X)
    Can you provide a link to the Corsair Datasheet or post the full model/serial number?
    Quote
    Intel 2 duo E8400 processor
    Is that an E8400 C0 or an E8400 E0?
    E8400, C0 --> sSpec# = SLAPL
    E8400, E0 --> sSpec# = SLB9J
    You can find the sSpec number here:
    Have you tested your memory with memtest86+? If not, please do that and make sure the each of the 10 individual tests runs at least once.

  • P45 diamond - corsair memory issues

    I have the p45 diamond board . i just upgraded to that board as well as the q9550 intel quad chip. I am running one of the recommended ram kits ( corsair 2x2gig tw3x4g16009hx )
    My vista 64bit install went fine but i noticed by default my ram was running at 1067 instead of 1333 at post screen. I flashed the bios to v1.4 and adjusted the timings and voltage in my bios to 9-9-9-24 1.8v. with the fsb/dram ratio @ 1:2.00 . the ram clocked at 1333 in my post screen. however. i started getting blue screens (win32k.sys) as well i can't even launch cod4, it says there was an error and closes. I have re-installed cod4 and it still doesn't work. I went back to the default memory speed and still doesn't work. After flashing my bios i get these errors. I called corsair and explained to them what was going on and they said that that particular ram has known issues. I advised that they're memory configurator lists that as compatible, they thought it had already been removed from being suggested. They set me up with an RMA for ( 2X2gig twin3x4096-1600c7dhx) and said that would fix the problem. I haven't received the ram yet but we will see.
    Is anyone else running this ram that i am RMA'ing up to? Its stupid that a high end board like this has so many problems with ram.
    here is a message on corsairs website.
    http://www.asktheramguy.com/v3/showthread.php?t=71780

    Quote from: hatebreeder on 07-October-08, 10:54:33
    I have the p45 diamond board . i just upgraded to that board as well as the q9550 intel quad chip. I am running one of the recommended ram kits ( corsair 2x2gig tw3x4g16009hx )
    here is a message on corsairs website.
    http://www.asktheramguy.com/v3/showthread.php?t=71780
    That's true, but pay attention to that "users looking for the best overclocking results".
    Also, he didn't mention the most important thing (the reason is obvious  ):
    all those modules are using overclocked & overvolted DDR3-1333 chips!
    As general rule, an overclocked component doesn't run properly on ANY configuration in any condition.
    Not to mention the extra heat, shorter lifetime and other troubles.
    Before buying DDR3 modules, check out their SPD settings (skip OCZ because most of their settings are messed up):
    7-7-7-20 at 1.5V means DDR3-1066
    9-9-9-24 at 1.5V means DDR3-1333
    Something more: 99% of the DDR3-1600 and DDR3-1800 on the market are in fact overvolted DDR3-1333.
    The fastest DDR3 chips on the market are DDR3-1600, but they're a "rara avis" in DDR3 modules (also they're very expensive).
    They have been designed to work with timings of 11-11-11-30(34) at 1.5V.
    They can be overvolted to 1.8-1.9V and they can reach 2000-2200MHz.
    For example, Buffalo has a DDR3 module using ELPIDA chips (11-11-11-34) able to reach 2400MHz at 2.1V.
    For future take care and don't buy "nice heatspreaders" 
    cheers

  • Flash Bios with Vista 64bit is a Problem

    I thought it was easy to flash my P6N Diamond. Unfortunately, it's not.  I'm not going to use a floppy disk to flash my drive because i don't have a drive and don't want to use them.  So, I used my Vista installation disk, but the bios flash exe (Afud408.exe) is a 32bit application and won't run in the 64bit command prompt.
    Liveupdate doesn't work either because it's vista and because it's 64bit. 
    MSI, please develop 64bit flash executables or atleast a vista/64bit compatible LiveUpdate.
    Until then, any ideas that aren't terribly complicated to update my bios?

    Relatively stable. I frequently get lockups at random times, as well as random crashes.  I have a QX6850 processor with Bios version 1.2.  Bios version 1.3 supposedly has a change directly for that processor. I'm hoping that updating to 1.3 will end my instability.
    1.3
    - Update CPU ID for QX6850.
    - Update NVMM.
    - Fixed system report incorrect memory size when install 4G memory.

  • [Solved] Random Freezes Requiring Manual Power off

    Since I built this system, I've been getting random freezes that force me to have to manually power off and back on the entire system.  I have no idea what's causing it and I've tried everything under the sun that I can think of to resolve it to no avail.  I posted about this a while back in another forum, but I'm hoping I'll have better luck here.
    Symptoms:
    Entire system will completely freeze.  No input is recognized, keyboard controls do not function (numlock, caps lock, etc.), cannot switch to another TTY, nothing.  There appears to be no rhyme or reason to when the freezes occur.  Sometimes the machine will be sitting idle and freeze in the middle of the night and I'll come in in the morning and find it frozen, other times I'll be in the middle of using it and it will freeze (as just happened).  Every time I have to hold down the power button to shut off, then turn it back on.
    What I've tried so far:
    Swapping out all the RAM
    Completely wiping the entire system and re-installing from the ground up (twice now I've done this)
    Unplugging various USB devices and seeing if leaving those unplugged helps (it does not).
    I'm at my wits end.  This has been going on for months and I have no idea what to do at this point. This is the most stumped I've ever been. 
    The thing that drives me the most nuts is that I have an almost *identical* system at home (the one that's freezing is my work computer).  Same CPU, same motherboard, same SSD partitions and layout, virtually the exact same software installed as well.  The only differences are a different GPU, different band of RAM, different brand of SSD, and a different case.  The specs from my home computer are in my signature and I can provide exact hardware info on the work system if anyone thinks it'll help.
    I'm willing to provide whatever information anyone can suggest to help troubleshoot the issue.  I've got a bunch of log output from journalctl from various times it's crashed, but I haven't been able to make sense of it with regards to finding patterns or useful troubleshooting information.  Below is the most recent log from a few minutes before and after the crash.  You'll see the reboot at 17:51:40
    (sudo journalctl --since 17:45:00)
    -- Logs begin at Mon 2015-04-06 13:26:57 EDT, end at Thu 2015-05-07 18:01:46 EDT. --
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 10
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.83" , with cookie 11 from "/usr/bin/google-chrome-stable" with "Playing Video"
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
    May 07 17:45:07 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
    May 07 17:45:11 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:18 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:19 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:22 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:31 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:40 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 11
    May 07 17:45:40 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
    May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:45 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:50 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.84" , with cookie 12 from "/usr/bin/google-chrome-stable" with "Playing Video"
    May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
    May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
    May 07 17:45:56 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 12
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.85" , with cookie 13 from "/usr/bin/google-chrome-stable" with "Playing Video"
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
    May 07 17:45:57 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 13
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.86" , with cookie 14 from "/usr/bin/google-chrome-stable" with "Playing Video"
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
    May 07 17:46:03 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
    May 07 17:46:04 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:04 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:19 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:19 workArchPC kdeinit5[794]: powerdevil: Released inhibition with cookie 14
    May 07 17:46:19 workArchPC kdeinit5[794]: powerdevil: Restoring DPMS features after inhibition release
    May 07 17:46:20 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:42 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:48 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:46:55 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:08 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:11 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:15 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:16 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:17 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:46 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:54 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:56 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:47:57 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:25 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:26 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:34 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:35 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:39 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added inhibition from an explicit DBus service, ":1.87" , with cookie 15 from "/usr/bin/google-chrome-stable" with "Playing Video"
    May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added change screen settings
    May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Added interrupt session
    May 07 17:48:43 workArchPC kdeinit5[794]: powerdevil: Disabling DPMS due to inhibition
    May 07 17:51:40 workArchPC kwin_x11[918]: kwin_core: Raising: Belongs to active application
    -- Reboot --
    May 07 17:54:22 workArchPC systemd-journal[263]: Runtime journal is using 8.0M (max allowed 1.5G, trying to leave 2.3G free of 15.6G available → current limit 1.5G).
    May 07 17:54:22 workArchPC systemd-journal[263]: Permanent journal is using 1.4G (max allowed 3.3G, trying to leave 4.0G free of 23.3G available → current limit 3.3G).
    May 07 17:54:22 workArchPC systemd-journal[263]: Time spent on flushing to /var is 4.536ms for 2 entries.
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpuset
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpu
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys cpuacct
    May 07 17:54:22 workArchPC kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
    May 07 17:54:22 workArchPC kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c215d6d6-d557-43a8-9801-f632e7f25e33 rw quiet
    May 07 17:54:22 workArchPC kernel: tseg: 00bd800000
    May 07 17:54:22 workArchPC kernel: e820: BIOS-provided physical RAM map:
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000ba70afff] usable
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000ba70b000-0x00000000bab3efff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bab3f000-0x00000000bab4efff] ACPI data
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bab4f000-0x00000000bb956fff] ACPI NVS
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bb957000-0x00000000bca33fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
    May 07 17:54:22 workArchPC kernel: BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable
    May 07 17:54:22 workArchPC kernel: NX (Execute Disable) protection: active
    May 07 17:54:22 workArchPC kernel: SMBIOS 2.7 present.
    May 07 17:54:22 workArchPC kernel: DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2301 01/06/2014
    May 07 17:54:22 workArchPC kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    May 07 17:54:22 workArchPC kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    May 07 17:54:22 workArchPC kernel: AGP: No AGP bridge found
    May 07 17:54:22 workArchPC kernel: e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
    May 07 17:54:22 workArchPC kernel: MTRR default type: uncachable
    May 07 17:54:22 workArchPC kernel: MTRR fixed ranges enabled:
    May 07 17:54:22 workArchPC kernel: 00000-9FFFF write-back
    May 07 17:54:22 workArchPC kernel: A0000-BFFFF write-through
    May 07 17:54:22 workArchPC kernel: C0000-CEFFF write-protect
    May 07 17:54:22 workArchPC kernel: CF000-EBFFF uncachable
    May 07 17:54:22 workArchPC kernel: EC000-FFFFF write-protect
    May 07 17:54:22 workArchPC kernel: MTRR variable ranges enabled:
    May 07 17:54:22 workArchPC kernel: 0 base 000000000000 mask FFFF80000000 write-back
    May 07 17:54:22 workArchPC kernel: 1 base 000080000000 mask FFFFC0000000 write-back
    May 07 17:54:22 workArchPC kernel: 2 base 0000BD800000 mask FFFFFF800000 uncachable
    May 07 17:54:22 workArchPC kernel: 3 base 0000BE000000 mask FFFFFE000000 uncachable
    May 07 17:54:22 workArchPC kernel: 4 disabled
    May 07 17:54:22 workArchPC kernel: 5 disabled
    May 07 17:54:22 workArchPC kernel: 6 disabled
    May 07 17:54:22 workArchPC kernel: 7 disabled
    May 07 17:54:22 workArchPC kernel: TOM2: 000000083f000000 aka 33776M
    May 07 17:54:22 workArchPC kernel: PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    May 07 17:54:22 workArchPC kernel: e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
    May 07 17:54:22 workArchPC kernel: e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
    May 07 17:54:22 workArchPC kernel: Scanning 1 areas for low memory corruption
    May 07 17:54:22 workArchPC kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
    May 07 17:54:22 workArchPC kernel: Using GB pages for direct mapping
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    May 07 17:54:22 workArchPC kernel: [mem 0x00000000-0x000fffff] page 4k
    May 07 17:54:22 workArchPC kernel: BRK [0x01b1b000, 0x01b1bfff] PGTABLE
    May 07 17:54:22 workArchPC kernel: BRK [0x01b1c000, 0x01b1cfff] PGTABLE
    May 07 17:54:22 workArchPC kernel: BRK [0x01b1d000, 0x01b1dfff] PGTABLE
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x83ee00000-0x83effffff]
    May 07 17:54:22 workArchPC kernel: [mem 0x83ee00000-0x83effffff] page 2M
    May 07 17:54:22 workArchPC kernel: BRK [0x01b1e000, 0x01b1efff] PGTABLE
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x820000000-0x83edfffff]
    May 07 17:54:22 workArchPC kernel: [mem 0x820000000-0x83edfffff] page 2M
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x800000000-0x81fffffff]
    May 07 17:54:22 workArchPC kernel: [mem 0x800000000-0x81fffffff] page 2M
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x00100000-0xba70afff]
    May 07 17:54:22 workArchPC kernel: [mem 0x00100000-0x001fffff] page 4k
    May 07 17:54:22 workArchPC kernel: [mem 0x00200000-0x3fffffff] page 2M
    May 07 17:54:22 workArchPC kernel: [mem 0x40000000-0x7fffffff] page 1G
    May 07 17:54:22 workArchPC kernel: [mem 0x80000000-0xba5fffff] page 2M
    May 07 17:54:22 workArchPC kernel: [mem 0xba600000-0xba70afff] page 4k
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbca34000-0xbca34fff]
    May 07 17:54:22 workArchPC kernel: [mem 0xbca34000-0xbca34fff] page 4k
    May 07 17:54:22 workArchPC kernel: BRK [0x01b1f000, 0x01b1ffff] PGTABLE
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbcc3b000-0xbd082fff]
    May 07 17:54:22 workArchPC kernel: [mem 0xbcc3b000-0xbcdfffff] page 4k
    May 07 17:54:22 workArchPC kernel: [mem 0xbce00000-0xbcffffff] page 2M
    May 07 17:54:22 workArchPC kernel: [mem 0xbd000000-0xbd082fff] page 4k
    May 07 17:54:22 workArchPC kernel: BRK [0x01b20000, 0x01b20fff] PGTABLE
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0xbd7f4000-0xbd7fffff]
    May 07 17:54:22 workArchPC kernel: [mem 0xbd7f4000-0xbd7fffff] page 4k
    May 07 17:54:22 workArchPC kernel: init_memory_mapping: [mem 0x100001000-0x7ffffffff]
    May 07 17:54:22 workArchPC kernel: [mem 0x100001000-0x1001fffff] page 4k
    May 07 17:54:22 workArchPC kernel: [mem 0x100200000-0x13fffffff] page 2M
    May 07 17:54:22 workArchPC kernel: [mem 0x140000000-0x7ffffffff] page 1G
    May 07 17:54:22 workArchPC kernel: RAMDISK: [mem 0x36e78000-0x37733fff]
    May 07 17:54:22 workArchPC kernel: ACPI: Early table checksum verification disabled
    May 07 17:54:22 workArchPC kernel: ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
    May 07 17:54:22 workArchPC kernel: ACPI: XSDT 0x00000000BAB47070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
    May 07 17:54:22 workArchPC kernel: ACPI: FACP 0x00000000BAB4E110 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
    May 07 17:54:22 workArchPC kernel: ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150204/tbfadt-649)
    May 07 17:54:22 workArchPC kernel: ACPI: DSDT 0x00000000BAB47168 006FA8 (v02 ALASKA A M I 00000000 INTL 20051117)
    May 07 17:54:22 workArchPC kernel: ACPI: FACS 0x00000000BB951F80 000040
    May 07 17:54:22 workArchPC kernel: ACPI: APIC 0x00000000BAB4E220 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
    May 07 17:54:22 workArchPC kernel: ACPI: FPDT 0x00000000BAB4E2C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
    May 07 17:54:22 workArchPC kernel: ACPI: MCFG 0x00000000BAB4E308 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    May 07 17:54:22 workArchPC kernel: ACPI: HPET 0x00000000BAB4E348 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
    May 07 17:54:22 workArchPC kernel: ACPI: IVRS 0x00000000BAB4E6E0 0000F8 (v01 AMD RD890S 00202031 AMD 00000000)
    May 07 17:54:22 workArchPC kernel: ACPI: SSDT 0x00000000BAB4E3D8 000304 (v01 AMD POWERNOW 00000001 AMD 00000001)
    May 07 17:54:22 workArchPC kernel: ACPI: Local APIC address 0xfee00000
    May 07 17:54:22 workArchPC kernel: No NUMA configuration found
    May 07 17:54:22 workArchPC kernel: Faking a node at [mem 0x0000000000000000-0x000000083effffff]
    May 07 17:54:22 workArchPC kernel: NODE_DATA(0) allocated [mem 0x83eff6000-0x83eff9fff]
    May 07 17:54:22 workArchPC kernel: [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
    May 07 17:54:22 workArchPC kernel: Zone ranges:
    May 07 17:54:22 workArchPC kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
    May 07 17:54:22 workArchPC kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
    May 07 17:54:22 workArchPC kernel: Normal [mem 0x0000000100000000-0x000000083effffff]
    May 07 17:54:22 workArchPC kernel: Movable zone start for each node
    May 07 17:54:22 workArchPC kernel: Early memory node ranges
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000000001000-0x000000000009dfff]
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000000100000-0x00000000ba70afff]
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
    May 07 17:54:22 workArchPC kernel: node 0: [mem 0x0000000100001000-0x000000083effffff]
    May 07 17:54:22 workArchPC kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
    May 07 17:54:22 workArchPC kernel: On node 0 totalpages: 8362748
    May 07 17:54:22 workArchPC kernel: DMA zone: 64 pages used for memmap
    May 07 17:54:22 workArchPC kernel: DMA zone: 21 pages reserved
    May 07 17:54:22 workArchPC kernel: DMA zone: 3997 pages, LIFO batch:0
    May 07 17:54:22 workArchPC kernel: DMA32 zone: 11886 pages used for memmap
    May 07 17:54:22 workArchPC kernel: DMA32 zone: 760672 pages, LIFO batch:31
    May 07 17:54:22 workArchPC kernel: Normal zone: 118720 pages used for memmap
    May 07 17:54:22 workArchPC kernel: Normal zone: 7598079 pages, LIFO batch:31
    May 07 17:54:22 workArchPC kernel: ACPI: PM-Timer IO Port: 0x808
    May 07 17:54:22 workArchPC kernel: ACPI: Local APIC address 0xfee00000
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
    May 07 17:54:22 workArchPC kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    May 07 17:54:22 workArchPC kernel: ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0])
    May 07 17:54:22 workArchPC kernel: IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
    May 07 17:54:22 workArchPC kernel: ACPI: IOAPIC (id[0x0a] address[0xfec20000] gsi_base[24])
    May 07 17:54:22 workArchPC kernel: IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
    May 07 17:54:22 workArchPC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    May 07 17:54:22 workArchPC kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    May 07 17:54:22 workArchPC kernel: ACPI: IRQ0 used by override.
    May 07 17:54:22 workArchPC kernel: ACPI: IRQ9 used by override.
    May 07 17:54:22 workArchPC kernel: Using ACPI (MADT) for SMP configuration information
    May 07 17:54:22 workArchPC kernel: ACPI: HPET id: 0x43538210 base: 0xfed00000
    May 07 17:54:22 workArchPC kernel: smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xba70b000-0xbab3efff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbab3f000-0xbab4efff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbab4f000-0xbb956fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbb957000-0xbca33fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
    May 07 17:54:22 workArchPC kernel: PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
    May 07 17:54:22 workArchPC kernel: e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
    May 07 17:54:22 workArchPC kernel: Booting paravirtualized kernel on bare hardware
    May 07 17:54:22 workArchPC kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    May 07 17:54:22 workArchPC kernel: PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86168 r8192 d32616 u262144
    May 07 17:54:22 workArchPC kernel: pcpu-alloc: s86168 r8192 d32616 u262144 alloc=1*2097152
    May 07 17:54:22 workArchPC kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    May 07 17:54:22 workArchPC kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 8232057
    May 07 17:54:22 workArchPC kernel: Policy zone: Normal
    May 07 17:54:22 workArchPC kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=c215d6d6-d557-43a8-9801-f632e7f25e33 rw quiet
    May 07 17:54:22 workArchPC kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    May 07 17:54:22 workArchPC kernel: xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    May 07 17:54:22 workArchPC kernel: AGP: Checking aperture...
    May 07 17:54:22 workArchPC kernel: AGP: No AGP bridge found
    May 07 17:54:22 workArchPC kernel: AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
    May 07 17:54:22 workArchPC kernel: Memory: 32838936K/33450992K available (5601K kernel code, 835K rwdata, 1776K rodata, 1160K init, 1152K bss, 612056K reserved, 0K cma-reserved)
    May 07 17:54:22 workArchPC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    May 07 17:54:22 workArchPC kernel: Preemptible hierarchical RCU implementation.
    May 07 17:54:22 workArchPC kernel: RCU dyntick-idle grace-period acceleration is enabled.
    May 07 17:54:22 workArchPC kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    May 07 17:54:22 workArchPC kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    May 07 17:54:22 workArchPC kernel: NR_IRQS:8448 nr_irqs:1032 16
    May 07 17:54:22 workArchPC kernel: spurious 8259A interrupt: IRQ7.
    May 07 17:54:22 workArchPC kernel: Console: colour dummy device 80x25
    May 07 17:54:22 workArchPC kernel: console [tty0] enabled
    May 07 17:54:22 workArchPC kernel: hpet clockevent registered
    May 07 17:54:22 workArchPC kernel: tsc: Fast TSC calibration failed
    May 07 17:54:22 workArchPC kernel: tsc: Unable to calibrate against PIT
    May 07 17:54:22 workArchPC kernel: tsc: using HPET reference calibration
    May 07 17:54:22 workArchPC kernel: tsc: Detected 4715.820 MHz processor
    May 07 17:54:22 workArchPC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 9435.62 BogoMIPS (lpj=15719400)
    May 07 17:54:22 workArchPC kernel: pid_max: default: 32768 minimum: 301
    May 07 17:54:22 workArchPC kernel: ACPI: Core revision 20150204
    May 07 17:54:22 workArchPC kernel: ACPI: All ACPI Tables successfully acquired
    May 07 17:54:22 workArchPC kernel: Security Framework initialized
    May 07 17:54:22 workArchPC kernel: Yama: becoming mindful.
    May 07 17:54:22 workArchPC kernel: Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
    May 07 17:54:22 workArchPC kernel: Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    May 07 17:54:22 workArchPC kernel: Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
    May 07 17:54:22 workArchPC kernel: Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys blkio
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys memory
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys devices
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys freezer
    May 07 17:54:22 workArchPC kernel: Initializing cgroup subsys net_cls
    May 07 17:54:22 workArchPC kernel: CPU: Physical Processor ID: 0
    May 07 17:54:22 workArchPC kernel: CPU: Processor Core ID: 0
    May 07 17:54:22 workArchPC kernel: mce: CPU supports 7 MCE banks
    May 07 17:54:22 workArchPC kernel: LVT offset 1 assigned for vector 0xf9
    May 07 17:54:22 workArchPC kernel: Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
    May 07 17:54:22 workArchPC kernel: Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
    May 07 17:54:22 workArchPC kernel: Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
    May 07 17:54:22 workArchPC kernel: ftrace: allocating 21221 entries in 83 pages
    May 07 17:54:22 workArchPC kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    May 07 17:54:22 workArchPC kernel: smpboot: CPU0: AMD FX(tm)-9590 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
    May 07 17:54:22 workArchPC kernel: Performance Events: Fam15h core perfctr, AMD PMU driver.
    May 07 17:54:22 workArchPC kernel: ... version: 0
    May 07 17:54:22 workArchPC kernel: ... bit width: 48
    May 07 17:54:22 workArchPC kernel: ... generic registers: 6
    May 07 17:54:22 workArchPC kernel: ... value mask: 0000ffffffffffff
    May 07 17:54:22 workArchPC kernel: ... max period: 00007fffffffffff
    May 07 17:54:22 workArchPC kernel: ... fixed-purpose events: 0
    May 07 17:54:22 workArchPC kernel: ... event mask: 000000000000003f
    May 07 17:54:22 workArchPC kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    May 07 17:54:22 workArchPC kernel: x86: Booting SMP configuration:
    May 07 17:54:22 workArchPC kernel: .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
    May 07 17:54:22 workArchPC kernel: x86: Booted up 1 node, 8 CPUs
    May 07 17:54:22 workArchPC kernel: smpboot: Total of 8 processors activated (75483.00 BogoMIPS)
    May 07 17:54:22 workArchPC kernel: devtmpfs: initialized
    May 07 17:54:22 workArchPC kernel: PM: Registering ACPI NVS region [mem 0xbab4f000-0xbb956fff] (14712832 bytes)
    May 07 17:54:22 workArchPC kernel: PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
    May 07 17:54:22 workArchPC kernel: pinctrl core: initialized pinctrl subsystem
    May 07 17:54:22 workArchPC kernel: RTC time: 21:54:19, date: 05/07/15
    May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 16
    May 07 17:54:22 workArchPC kernel: cpuidle: using governor ladder
    May 07 17:54:22 workArchPC kernel: cpuidle: using governor menu
    May 07 17:54:22 workArchPC kernel: ACPI: bus type PCI registered
    May 07 17:54:22 workArchPC kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    May 07 17:54:22 workArchPC kernel: PCI: not using MMCONFIG
    May 07 17:54:22 workArchPC kernel: PCI: Using configuration type 1 for base access
    May 07 17:54:22 workArchPC kernel: PCI: Using configuration type 1 for extended access
    May 07 17:54:22 workArchPC kernel: mtrr: your CPUs had inconsistent variable MTRR settings
    May 07 17:54:22 workArchPC kernel: mtrr: probably your BIOS does not setup all CPUs.
    May 07 17:54:22 workArchPC kernel: mtrr: corrected configuration.
    May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Module Device)
    May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Processor Device)
    May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    May 07 17:54:22 workArchPC kernel: ACPI: Added _OSI(Processor Aggregator Device)
    May 07 17:54:22 workArchPC kernel: ACPI: Executed 2 blocks of module-level executable AML code
    May 07 17:54:22 workArchPC kernel: ACPI: Interpreter enabled
    May 07 17:54:22 workArchPC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
    May 07 17:54:22 workArchPC kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
    May 07 17:54:22 workArchPC kernel: ACPI: (supports S0 S3 S4 S5)
    May 07 17:54:22 workArchPC kernel: ACPI: Using IOAPIC for interrupt routing
    May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    May 07 17:54:22 workArchPC kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    May 07 17:54:22 workArchPC kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    May 07 17:54:22 workArchPC kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    May 07 17:54:22 workArchPC kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    May 07 17:54:22 workArchPC kernel: PCI host bridge to bus 0000:00
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:11.0: reg 0x24: [mem 0xfe60b000-0xfe60b3ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: reg 0x10: [mem 0xfe60a000-0xfe60afff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: reg 0x10: [mem 0xfe609000-0xfe6090ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    May 07 17:54:22 workArchPC kernel: pci 0000:00:12.2: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: reg 0x10: [mem 0xfe608000-0xfe608fff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: reg 0x10: [mem 0xfe607000-0xfe6070ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    May 07 17:54:22 workArchPC kernel: pci 0000:00:13.2: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: reg 0x10: [mem 0xfe600000-0xfe603fff 64bit]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.2: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: reg 0x10: [mem 0xfe606000-0xfe606fff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.5: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: reg 0x10: [mem 0xfe605000-0xfe605fff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.0: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: reg 0x10: [mem 0xfe604000-0xfe6040ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
    May 07 17:54:22 workArchPC kernel: pci 0000:00:16.2: System wakeup disabled by ACPI
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: [10de:1381] type 00 class 0x030000
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfe000000-0xfe07ffff pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfe080000-0xfe083fff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
    May 07 17:54:22 workArchPC kernel: pci 0000:02:00.0: reg 0x24: [mem 0xfe500000-0xfe5001ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x10: [io 0xc050-0xc057]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x14: [io 0xc040-0xc043]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x18: [io 0xc030-0xc037]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x1c: [io 0xc020-0xc023]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc01f]
    May 07 17:54:22 workArchPC kernel: pci 0000:03:00.0: reg 0x24: [mem 0xfe400000-0xfe4001ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
    May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: reg 0x10: [mem 0xfe300000-0xfe307fff 64bit]
    May 07 17:54:22 workArchPC kernel: pci 0000:04:00.0: PME# supported from D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PCI bridge to [bus 04]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PCI bridge to [bus 05]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PCI bridge to [bus 06]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PCI bridge to [bus 07]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: PCI bridge to [bus 09]
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x10: [io 0xb000-0xb0ff]
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: supports D1 D2
    May 07 17:54:22 workArchPC kernel: pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: PCI bridge to [bus 0a]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: [1b21:1142] type 00 class 0x0c0330
    May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: reg 0x10: [mem 0xfe200000-0xfe207fff 64bit]
    May 07 17:54:22 workArchPC kernel: pci 0000:0b:00.0: PME# supported from D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: PCI bridge to [bus 0b]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: [1b21:1142] type 00 class 0x0c0330
    May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: reg 0x10: [mem 0xfe100000-0xfe107fff 64bit]
    May 07 17:54:22 workArchPC kernel: pci 0000:0c:00.0: PME# supported from D3cold
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: PCI bridge to [bus 0c]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: on NUMA node 0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    May 07 17:54:22 workArchPC kernel: ACPI: Enabled 1 GPEs in block 00 to 1F
    May 07 17:54:22 workArchPC kernel: ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
    May 07 17:54:22 workArchPC kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
    May 07 17:54:22 workArchPC kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    May 07 17:54:22 workArchPC kernel: vgaarb: loaded
    May 07 17:54:22 workArchPC kernel: vgaarb: bridge control possible 0000:01:00.0
    May 07 17:54:22 workArchPC kernel: PCI: Using ACPI for IRQ routing
    May 07 17:54:22 workArchPC kernel: PCI: pci_cache_line_size set to 64 bytes
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xba70b000-0xbbffffff]
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
    May 07 17:54:22 workArchPC kernel: e820: reserve RAM buffer [mem 0x83f000000-0x83fffffff]
    May 07 17:54:22 workArchPC kernel: NetLabel: Initializing
    May 07 17:54:22 workArchPC kernel: NetLabel: domain hash size = 128
    May 07 17:54:22 workArchPC kernel: NetLabel: protocols = UNLABELED CIPSOv4
    May 07 17:54:22 workArchPC kernel: NetLabel: unlabeled traffic allowed by default
    May 07 17:54:22 workArchPC kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    May 07 17:54:22 workArchPC kernel: hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    May 07 17:54:22 workArchPC kernel: Switched to clocksource hpet
    May 07 17:54:22 workArchPC kernel: pnp: PnP ACPI init
    May 07 17:54:22 workArchPC kernel: system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x040b] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x04d6] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c00-0x0c01] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c14] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c50-0x0c51] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c52] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c6c] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0c6f] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd4-0x0cd5] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd6-0x0cd7] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0cd8-0x0cdf] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0800-0x089f] could not be reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0b20-0x0b3f] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0900-0x090f] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0x0910-0x091f] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [io 0xfe00-0xfefe] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: [mem 0xff800000-0xffffffff] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: system 00:02: [io 0x0290-0x02af] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    May 07 17:54:22 workArchPC kernel: system 00:04: [io 0x04d0-0x04d1] has been reserved
    May 07 17:54:22 workArchPC kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    May 07 17:54:22 workArchPC kernel: pnp 00:07: [dma 0 disabled]
    May 07 17:54:22 workArchPC kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    May 07 17:54:22 workArchPC kernel: system 00:08: [mem 0xfeb20000-0xfeb23fff] could not be reserved
    May 07 17:54:22 workArchPC kernel: system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: system 00:09: [mem 0xfec20000-0xfec200ff] could not be reserved
    May 07 17:54:22 workArchPC kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    May 07 17:54:22 workArchPC kernel: pnp: PnP ACPI: found 10 devices
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: PCI bridge to [bus 01]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xfd000000-0xfe0fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: PCI bridge to [bus 02]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:04.0: bridge window [mem 0xfe500000-0xfe5fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: PCI bridge to [bus 03]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:05.0: bridge window [mem 0xfe400000-0xfe4fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: PCI bridge to [bus 04]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:09.0: bridge window [mem 0xfe300000-0xfe3fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0a.0: PCI bridge to [bus 05]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0b.0: PCI bridge to [bus 06]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:0d.0: PCI bridge to [bus 07]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:14.4: PCI bridge to [bus 08]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.0: PCI bridge to [bus 09]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: PCI bridge to [bus 0a]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.1: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: PCI bridge to [bus 0b]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.2: bridge window [mem 0xfe200000-0xfe2fffff]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: PCI bridge to [bus 0c]
    May 07 17:54:22 workArchPC kernel: pci 0000:00:15.3: bridge window [mem 0xfe100000-0xfe1fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:02: resource 1 [mem 0xfe500000-0xfe5fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:04: resource 1 [mem 0xfe300000-0xfe3fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff window]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:0a: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:0b: resource 1 [mem 0xfe200000-0xfe2fffff]
    May 07 17:54:22 workArchPC kernel: pci_bus 0000:0c: resource 1 [mem 0xfe100000-0xfe1fffff]
    May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 2
    May 07 17:54:22 workArchPC kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    May 07 17:54:22 workArchPC kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    May 07 17:54:22 workArchPC kernel: TCP: Hash tables configured (established 262144 bind 65536)
    May 07 17:54:22 workArchPC kernel: TCP: reno registered
    May 07 17:54:22 workArchPC kernel: UDP hash table entries: 16384 (order: 7, 524288 bytes)
    May 07 17:54:22 workArchPC kernel: UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
    May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 1
    May 07 17:54:22 workArchPC kernel: pci 0000:01:00.0: Video device with shadowed ROM
    May 07 17:54:22 workArchPC kernel: PCI: CLS 64 bytes, default 64
    May 07 17:54:22 workArchPC kernel: Unpacking initramfs...
    May 07 17:54:22 workArchPC kernel: Freeing initrd memory: 8944K (ffff880036e78000 - ffff880037734000)
    May 07 17:54:22 workArchPC kernel: AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
    May 07 17:54:22 workArchPC kernel: AMD-Vi: Interrupt remapping enabled
    May 07 17:54:22 workArchPC kernel: AMD-Vi: Lazy IO/TLB flushing enabled
    May 07 17:54:22 workArchPC kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    May 07 17:54:22 workArchPC kernel: software IO TLB [mem 0xb670b000-0xba70b000] (64MB) mapped at [ffff8800b670b000-ffff8800ba70afff]
    May 07 17:54:22 workArchPC kernel: perf: AMD NB counters detected
    May 07 17:54:22 workArchPC kernel: microcode: CPU0: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU1: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU2: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU3: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU4: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU5: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU6: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: CPU7: patch_level=0x06000822
    May 07 17:54:22 workArchPC kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    May 07 17:54:22 workArchPC kernel: LVT offset 0 assigned for vector 0x400
    May 07 17:54:22 workArchPC kernel: perf: AMD IBS detected (0x000000ff)
    May 07 17:54:22 workArchPC kernel: Scanning for low memory corruption every 60 seconds
    May 07 17:54:22 workArchPC kernel: futex hash table entries: 2048 (order: 5, 131072 bytes)
    May 07 17:54:22 workArchPC kernel: Initialise system trusted keyring
    May 07 17:54:22 workArchPC kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    May 07 17:54:22 workArchPC kernel: zpool: loaded
    May 07 17:54:22 workArchPC kernel: zbud: loaded
    May 07 17:54:22 workArchPC kernel: VFS: Disk quotas dquot_6.5.2
    May 07 17:54:22 workArchPC kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    May 07 17:54:22 workArchPC kernel: Key type big_key registered
    May 07 17:54:22 workArchPC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    May 07 17:54:22 workArchPC kernel: io scheduler noop registered
    May 07 17:54:22 workArchPC kernel: io scheduler deadline registered
    May 07 17:54:22 workArchPC kernel: io scheduler cfq registered (default)
    May 07 17:54:22 workArchPC kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    May 07 17:54:22 workArchPC kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    May 07 17:54:22 workArchPC kernel: vesafb: mode is 1920x1080x32, linelength=7680, pages=0
    May 07 17:54:22 workArchPC kernel: vesafb: scrolling: redraw
    May 07 17:54:22 workArchPC kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    May 07 17:54:22 workArchPC kernel: vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90013600000, using 8128k, total 8128k
    May 07 17:54:22 workArchPC kernel: Console: switching to colour frame buffer device 240x67
    May 07 17:54:22 workArchPC kernel: fb0: VESA VGA frame buffer device
    May 07 17:54:22 workArchPC kernel: GHES: HEST is not enabled!
    May 07 17:54:22 workArchPC kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    May 07 17:54:22 workArchPC kernel: 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    May 07 17:54:22 workArchPC kernel: Linux agpgart interface v0.103
    May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: RTC can wake from S4
    May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    May 07 17:54:22 workArchPC kernel: ledtrig-cpu: registered to indicate activity on CPUs
    May 07 17:54:22 workArchPC kernel: TCP: cubic registered
    May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 10
    May 07 17:54:22 workArchPC kernel: NET: Registered protocol family 17
    May 07 17:54:22 workArchPC kernel: Loading compiled-in X.509 certificates
    May 07 17:54:22 workArchPC kernel: registered taskstats version 1
    May 07 17:54:22 workArchPC kernel: Magic number: 15:637:954
    May 07 17:54:22 workArchPC kernel: memory memory7: hash matches
    May 07 17:54:22 workArchPC kernel: rtc_cmos 00:03: setting system clock to 2015-05-07 21:54:20 UTC (1431035660)
    May 07 17:54:22 workArchPC kernel: PM: Hibernation image not present or could not be loaded.
    May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 1160K (ffffffff818d2000 - ffffffff819f4000)
    May 07 17:54:22 workArchPC kernel: Write protecting the kernel read-only data: 8192k
    May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
    May 07 17:54:22 workArchPC kernel: Freeing unused kernel memory: 272K (ffff8800017bc000 - ffff880001800000)
    May 07 17:54:22 workArchPC kernel: random: systemd-tmpfile urandom read with 1 bits of entropy available
    May 07 17:54:22 workArchPC kernel: device-mapper: uevent: version 1.0.3
    May 07 17:54:22 workArchPC kernel: device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: [email protected]
    May 07 17:54:22 workArchPC kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    May 07 17:54:22 workArchPC kernel: i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    May 07 17:54:22 workArchPC kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    May 07 17:54:22 workArchPC kernel: SCSI subsystem initialized
    May 07 17:54:22 workArchPC kernel: ACPI: bus type USB registered
    May 07 17:54:22 workArchPC kernel: usbcore: registered new interface driver usbfs
    May 07 17:54:22 workArchPC kernel: usbcore: registered new interface driver hub
    May 07 17:54:22 workArchPC kernel: usbcore: registered new device driver usb
    May 07 17:54:22 workArchPC kernel: libata version 3.00 loaded.
    May 07 17:54:22 workArchPC kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    May 07 17:54:22 workArchPC kernel: QUIRK: Enable AMD PLL fix
    May 07 17:54:22 workArchPC kernel: xhci_hcd 0000:04:00.0: xHCI Host Controller
    May 07 17:54:22 workArchPC kernel: xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
    May 07 17:54:22 workArchPC kernel: ehci-pci: EHCI PCI platform driver
    May 07 17:54:22 workArchPC kernel: ohci_hcd: USB

    My thinking is that Plasma is not "playing" nicely with nvidia, I have two systems in my pc, one with kde4 and the other one (my testing system) with plasma, kde4 runs as it should, no lags, no freezes, no redrawing problems, fast and smooth. My plasma system is really not there, I tweak both systems the same, 20-nvidia.config on the xorg.d folder created by the nvidia settings, same where I also tweak all settings to juice my video card to its fullest (a really weak one by the way, a fanless gt430) and the triple buffering enabled for kde. I do have freezes with Plasma that lock the whole system, no keyboard input, and its been more or less the same since its release (for me that is), I am keep waiting to see if the "next" release would do, 5.3 still not yet. I also notice that compositing effects makes things worst, for example, snapping a window to a corner or to maximize when wobbly effect is on is a sure shot for a freeze for my system, I just update today the linux kernel and the nvidia driver, would see if that helps a little. My advice, for a stable system stick to kde4 still.
    Edit: Note, I have a good old amd phenom 6 cores and I always run it with some over-clocking, never have issues with that on my previous install or my main system.
    Last edited by RJQ (2015-05-08 15:43:16)

Maybe you are looking for

  • Can not receive emails from any accounts rather than Rogers(my ISP)

    Hi all, I have OCS10g installed on RHEL_AS4. Currently I got problem to receive and send emails both inbound and outbound. When I send e-mail by either Oracle Web Access Client or Oracle Mail. It went smooth through the sending page. Unfortunately I

  • ORA-01008 error on page process process

    Hi All, I am getting an "ORA-01008: not all variables bound" error when saving a process in a page. Below is a snapshot of the process. All bind variables are being used in other processes within the same page without any problems. DECLARE I_EMAIL_SU

  • Loading History Data

    Hi All. I have some data loaded in BW flow from Nov 13 to Till date.Its a daily load.Now the client wants the data before Nov. 13 also.One month data has above 2 crore records.Its an FIGL Load.As its a daily load,i have a small window of time to load

  • What is a federated exchange solution

    Can someone please explain what a federated exchange solution is?

  • HT201401 Error -1

    hey guys ! my iphone 4s ,was in water damaged ,its on recovery mode  and i cant restore that, its going truth until coming iphone up and then give the iphone could not be restored an unknown error occurred (-1) anyone knows about this?how can i fix i