P45 Neo3-FR - Unable to load Vista or Server 2008

I urgently need to get this machine opperational as it's for a developer that's starting tomorrow. Herre's the issue -
1. Whenever i try loading either Vista or Server 2008 (which both use a lot of the same drivers I am told) i cannot get past the first 'Windows is loading files' screen. This did used to just stop at the end of the bar, however with Viat i get the bsod - 0x0000007E - which is a driver problem (from what I've read it's likely to do with the SATA drivers on the MOBO).
2. Never booted up before, so still trying to get teh OS to start. Here's the specs -
Seagate ST3500320AS 500GB Hard Drive SATA II 7200rpm *32MB Cache* - OEM - qty 2 (setup with RAID1)
Intel Core 2 Quad Q6600 G0 Stepping (2.4GHz 1066MHz) Socket 775 L2 8MB Cache (2x4MB (4MB per core pair) Retail Boxed Processor
MSI P45 Neo3-FR Socket 775 8 Channel Audio ATX Motherboard
Corsair 4Gb (2x2GB) DDR2 1066MHz/PC2-8500 XMS2 Memory
ASUS HD 3650 256MB DDR3 Dual DVI HDTV out PCI-E Graphics Card
Please help me out here. I was trying to flash the BIOS as it's currently running 1.3, newest is 1.6. I don't have a floppy drive and have been trying to setup a boot disk via my USB flash drive. SO far this hasn't worked.
Is the MOBO just not compatible with this setup, or even the latest OS?
Thanks
RIch

Quote
WHat the hell is wrong with this stupid MOBO?!?!
At the moment, all this looks like a driver problem, not a hardware problem.
Quote
Sorry to say i'm not very good at making these types of changes
... or a problem with your BIOS settings...or you are simply missing something...
Quote
I thought that i had set the RAID drivers up correctly
The board has two controllers which control different SATA ports: Intel ICH10R (6 ports) and JMicron 363 (two SATA port (slightly different color).
The first question is: Which SATA ports are your hard drives connected to?
Each of the two controllers can be set to RAID mode in BIOS independently and for each of the Controllers, different SATA RAID Drivers exist.
- Which drivers did you integrate in the first place?
- Which of the controllers is set to RAID mode?
Quote
I have uplugged one of the HD and set the BIOS to IDE.
Which controller did you set to IDE mode? If the other one is still operating in RAID mode, you will need drivers for that one.
Quote
I can run Vista (SP1 integrated?!) out of the box on my P45 Neo3-FR board, with a SATA drive connected to the ICH10R controller in RAID (prepared) mode, so I don't think you even need a special driver.
Remember: Windows based operating systems are stupid and the generic drivers that Microsoft has provided are pretty much useless (they don't always work). Also, as I already pointed out, it depends which controller is set to RAID mode as well.

Similar Messages

Unable to execute embedded application windows azure in Windows Vista and Server 2008

I'm having problems to install the backup application Azure.
In Windows Vista and Server 2008 .
I segudo instructions :
http://support.microsoft.com/es-es/kb/2934202
But I still can not install the agent.
When I run it , it is decompressed and then a window with an error.
Anyone else happens ?

The message that Windows creates me exactly is:
Unable to execute the embedded application to complete the installation.
After being , checking this:
Microsoft .NET Framework 4
Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package MFC Security Update
Windows PowerShell 3.0 (my machine is 2.0)
Microsoft.NET Framework 4 Client Profile (installed)
Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (installed)
The announcement of support Server 2008 64bit versions .
https://msdn.microsoft.com/es-es/library/azure/jj573031.aspx#BKMK_testsrv
I realize that my machine is 32bit Server 2008 Standard
http://azure.microsoft.com/blog/2014/10/06/announcing-support-for-backup-of-windows-server-2008-with-azure-backup/
It occurred to me descompri the MARSAgentInstaller package.
Run the application, but being 32bit my system , I think the Agent application is 64bit Copies Azure .
For this throws an error commenting same .

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

Installation Support of SAP Kernel Products on Vista / Windows Server 2008

one of the major design goals of Vista and Microsoft Server 2008 is to harden the operating system against unauthorized attacks from viruses, trojan horses etc.
The most important change in Vista/Windows Server 2008 (formerly longhorn) is: a process running under a user account which belongs to the local administrators group does not run with administrative priviledges as long the process is not elevated to the administrative level.
Elevation can be done by starting the process per Explorer using Run As Administrator or using special APIs, which are new in Vista. Programs started with Run as Administrator will not be able to start subprocesses elevated without additional changes (compared to Windows XP / Server 2003).
Security settings of many Windows system objects like Directories and Registry Hives etc are much more restrictive in Vista compared to Windows Server 2003 / XP. In some functions SAPinst tries to access registry keys and values for enumeration with full access which is no longer possible in Vista.
In other words: without code changes in SAPInst for Vista / Windows Server 2003 there will be no possibility to install a SAP System on these platforms.
If you do not have a SAP note stating the opposit or if you do not have a PAM (Product Availability Matrix) entry promising support for Vista / Windows Server 2008 the probability is about 99.9 percent (or even higher) that the installation will not run.
regards
Peter

> >>If you do not have a SAP note stating the opposit
> or
> but there is nothing with what I wrote: Note 1054740
> describes how to evaluate 7.00 based products.
...on Windows Longhorn (which will be your quoted Windows Server 2008)
> This version will work - but the rest - especially
> those ECC5 or 4.7 based IDES or MiniSAP systems or
> all that stuff which is widely copied through some
> unknown channels will not install.
yes, that's true.
I know of efforts porting MaxDB to Vista (there are some PTS'ses open) but generally one can say, that products below 7.00 are unlikely to work short term.
Markus

"Unable to load URL" - SQL Server 2005 DB Web Service Connection

Hi ,
I am using XCelsius version 5.0.0.99 to create dashboards connecting to SQL Server 2005.
Find below the details of the steps -
1. Created a web service within SQL Server 2005 database.
2. Copied the WSDL URL.
3. In XCelsius 2008 -> Data Manager -> Web Service Connection, pasted the URL in the WSDL URL input box and clicked "Import" to import the methods. At this point I am getting "Unable to load URL" .
Am I missing any step ?
Any suggestion would be highly appreciated.
Note : I have tested the web service by using it in a ASP.Net project and works fine.
Thanks
Chitra

Hi,
Error :unable to Load URL occurs" because Crystal xcelsius only support single schema web service created from Query as a web service and Flynet tool available in xcelsius 2008.
The reason:
All the web service create from Sql 2005 ,PHP script produced multiple scehma web service and crystal xcelsius only support single schema web service which can be created from Query as a web service or Flynet.
Please revert in case of any queries.
Regards
Kekti Fadnavis

Unable to install Microsoft SQL Server 2008 R2

It is showing error: Attempted to perform unauthorized operation. So was unable to install
Database Engine
Replication
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1&EvtType=0x6121810A%25400x92D13C14
BUTTONS:
&Retry
Cancel
Log File
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2013-01-25 10:59:08
End time: 2013-01-25 11:13:30
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.1600.1%26EvtType%3d0x6121810A%400x92D13C14
Machine Properties:
Machine name: VARUNGUPTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.3.5500.0 No
Sql Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.3.5500.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\a716bfc2c0347dcd1c0fc7fcedc92a06\x86\setup\
Installation edition: EXPRESS_ADVANCED
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VarunGupta-PC\Varun Gupta
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130125_105747\SystemConfigurationCheck_Report.htm

I was finally able to get out of this issue... but later got stuck here with following error
TITLE: SQL Server 2008 R2 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0&EvtType=0x6121810A%25400x92D13C14
BUTTONS:
&Retry
Cancel
Also tried by running as administrator.
It failed to install
Data Engine Services
SQL Server Replication
Full - Text Search
Reporting Services
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068119551
Exit facility code: 1211
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2013-01-27 01:11:08
End time: 2013-01-27 01:23:26
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x6121810A%400x92D13C14
Machine Properties:
Machine name: VARUNGUPTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 2
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Full-Text Search
1033 Express Edition 10.51.2500.0 No
Sql Server 2008 R2 SQLEXPRESS MSRS10_50.SQLEXPRESS Reporting Services
1033 10.51.2500.0
No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.51.2500.0 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c49037ca8dfa571dfe4480d170\x86\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: True
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: c:\Program Files\Microsoft SQL Server
INSTANCEID: VARUNGUPTA
INSTANCENAME: VARUNGUPTA
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c49037ca8dfa571dfe4480d170\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VarunGupta-PC\Varun Gupta
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: True
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20130127_010951\SystemConfigurationCheck_Report.htm
Here is Detail.txt file
http://sdrv.ms/W759Wo

ODBC error generating temp file: "Unable to create file buffer" Server 2008

Guys:
I have a 32 bit application that has been running for years with no problems under XP and MS Server 2003.
To access the oracle DB we use MFC drivers and ODBC system datasources for Oracle 10g and 11g.
We recently moved from MS Server 2003 to Server 2008 Standard Edition (32 bit).
We also upgraded our DB from 10g to 11g R2.
Now the application gets intermittent errors when accessing the database like the one below:
"Unable to create file buffer"
I looked this up on other forums and it seems to be a problem with the ODBC driver creating uniquely names temp files
in the system temp folder. This was a documented problem some years ago and was fixed but now seems to have
reared its ugly head for Server 2008.
I'm not sure who the culprit is: 2008 32-bit or the 11g drivers.
I just know that some of our transactions fail because ODBC has problems and this is killing us.
As you see we are still running on a 32 bit OS and have created the ODBC DSNs using odbcad32.exe.
The application connects to the DB and works MOST OF THE TIME but random transactions now fail because of this error.
If I try to kill all of the *.tmp files from the windows temp directory it seems to solve the problem for a while but then the problem comes back rather quickly.
Any help here would be apprciated.

This may solve the issue: http://support.microsoft.com/kb/130719
Don't just delete the offending file...it will be recreated eventually. Post a dummy file to prevent the error from reoccurring.
My only question is why you put more info on database and ODBC versions here and not in your SR? I'll note this in your SR for ya ;)

Unable to connect to sql server 2008

i have windows 8 64-bit on my system, i installed sql server 2008 it installed successfully, but now i'm unable to open server management studio, it is showing error like "provider:named pipes provider, error:40-
could not open a connection to sql server microsoft sql
server, error:2" and in configuration manager there is nothing under "sql server services and sql server network configuration"kindly help me to fix this problem

Hello,
Please run the Discovery Report as shown in the following resource and make sure the Database Engine Services is listed
on the report.
http://blogs.msdn.com/b/petersad/archive/2009/11/13/sql-server-2008-discovery-report.aspx
If the Database Engine Services is listed on the report, please apply SP3 for SQL Server 2008 since SQL Server is not compatible with Windows 8 without that service pack.
http://support.microsoft.com/kb/2681562
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

HTTPs Sites Slow to load on Single Server 2008 R2 Box

Hello All,
I have an issue with our new server where https sites are slow to load or do not load at all in IE 9 or Google Chrome. Using Firefox any page loads fine. I have tested many things, reinstalled IE, downgraded to IE8, upgraded to IE10, checked
the forums, tested SSL settings and still get the same issue.
For example if I open IE, navigate to google.com I will get a "waiting for google.com" that will sometimes take 5 minutes to load; the same behavior is noticed on Google Chrome but not Firefox. I did notice that if I installed google.com
SSL certificate that the page would load normally. I have tested the same method on another Server 2008 R2 box with no issues. I am not sure what the issue could be. Any ideas or direction would be greatly appreciated since this is directly affecting business
for my client.
Thank you!

As Google Chrome is using some IE settings, it might be normal to have a similar behavior.
You can try to reset IE settings: http://support.microsoft.com/kb/923737/en-us
If this does not help, you can ask them in IE forum: http://social.technet.microsoft.com/Forums/ie/en-US/home?category=internetexplorer
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Unable to load forms Application Server starting page as comprd to earlier

I have insatalled my Allication in Forms Application server 10g and it was running succesfully up to yesterday.
All of a sudden my application got slow down,and it is taking more time to load my first page(say Logon.fmx).
Clearly to say a pop like "oracle Application Server Forms 10g" is displaying for more time rather than skipping to my Logon.fmx.
pls help

I saw this on another windows machine as well. I believe that the port should be 1800 and not 18100. Look into the emd.properties and check if they are configured correctly.
cu
Andreas

Unable to load Malaysian websites (server error)

I am unable to access any Malaysian websites (eg. Air asia) the error message "server not found" keeps displaying.
All other websites around the world are accessed ok.

I suggest that your run the Acrobat Cleaner Tool http://labs.adobe.com/downloads/acrobatcleaner.html
then download and reinstall the latest Reader from http://get.adobe.com/reader/enterprise/

Unable to dual boot Windows Server 2008 On My new HP laptop

Hello,
I have recently purchased a laptop from HP Site. Here are the specifications of my laptop.
OS : Windows 8.1
HP ENVY 17T
4710HQ PROCESSOR
16GB RAM
I have created a new NTFS Partition and I am trying to install WINDOWS SERVER 2008 from setup file from my hard disk.

Hi:
Yes, the drive controller in your notebook is set to AHCI, not RAID.
Here are the AHCI drivers in the setup information file I posted above...They are in the iaAHCIC file...
PCI\VEN_8086&DEV_8C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
PCI\VEN_8086&DEV_9C03&CC_0106.DeviceDesc = "Intel(R) 8 Series Chipset Family SATA AHCI Controller"
You need to select the driver that matches the hardware ID for the specific Intel(R) 8 Series Chipset Family SATA AHCI Controller your model has.
It either has the 8C03 controller or the 9C03 controller.
You can find the hardware ID for the specific controller your notebook has by clicking on the Intel(R) 8 Series Chipset Family SATA AHCI Controller.
The click on the Details tab at the top of the Intel(R) 8 Series Chipset Family SATA AHCI Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the third item (Hardware ID's). Now you should see the ID device string.

Unable to connect to sql server 2008 r2 after upgrading from framework 4.0 to 4.5.2 in windows 7 environment

Hi All,
BackGround
I used to connect to database with Encrypt set true in sql connection which helps established encrypted data base connection . I verified that created certificate in order
to provide Encrypted connection to database for client is valid.
Issue :Issue
is un-able to connect to sql sever2008 r2 from vs2013 by enforcing encryption to true.
while trying to test the connection from vs2013 error log getting recorded as well as error notification is getting populated as below .
Step1 :
from Vs2013 trying to connect to sql server 2008 r2
step 2: on Click test Connection . getting below mentioned error notification
Event Viewer Log:<o:p></o:p>
<o:p></o:p>
(Process Id: 7472)
<o:p></o:p>
.Net SqlClient Data Provider:<o:p></o:p>
A connection was successfully established with the server, but then an error
occurred during the login process. (provider: SSL Provider, error: 0 - The
target principal name is incorrect.)<o:p></o:p>
 at
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception,
Boolean breakConnection, Action`1 wrapCloseInAction)<o:p></o:p>
 at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)<o:p></o:p>
 at
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle,
SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean
callerHasConnectionLock)<o:p></o:p>
 at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean
canAccumulate)<o:p></o:p>
 at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte
flushMode, Boolean canAccumulate)<o:p></o:p>
 at System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec,
FeatureExtension requestedFeatures, SessionData recoverySessionData)<o:p></o:p>
 at
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)<o:p></o:p>
 at
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo
serverInfo, String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential
credential, TimeoutTimer timeout)<o:p></o:p>
 at
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer
timeout, SqlConnectionString connectionOptions, SqlCredential credential,
String newPassword, SecureString newSecurePassword, Boolean
redirectedUserInstance)<o:p></o:p>
 at
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity
identity, SqlConnectionString connectionOptions, SqlCredential credential,
Object providerInfo, String newPassword, SecureString newSecurePassword,
Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions,
SessionData reconnectSessionData)<o:p></o:p>
 at
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions
options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo,
DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions
userOptions)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool
pool, DbConnection owningObject, DbConnectionOptions options,
DbConnectionPoolKey poolKey, DbConnectionOptions userOptions)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
 at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection
owningObject, DbConnectionOptions userOptions, DbConnectionInternal
oldConnection)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate,
Boolean onlyOneCheckConnection, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection
owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions,
DbConnectionInternal& connection)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection
owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions
userOptions, DbConnectionInternal oldConnection, DbConnectionInternal&
connection)<o:p></o:p>
 at
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection
outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1
retry, DbConnectionOptions userOptions)<o:p></o:p>
 at
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)<o:p></o:p>
 at
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)<o:p></o:p>
 at System.Data.SqlClient.SqlConnection.Open()<o:p></o:p>
Inner Exception:<o:p></o:p>
:<o:p></o:p>
The target principal name is incorrect

The target principal name is incorrect
Hi Rahul.U,
Are you able to connect to SQL Server successfully from SQL Server Management Studio (SSMS) when enforcing encryption?
According to above error message, it could be caused by the inappropriate server name or incorrect TrustServerCertificate configuration in the connection string from Visual Studio. There are some proposals for you troubleshooting this error.
1. Make sure that you connect to the SQL server using the fully qualified domain name (FQDN).
2. When connecting to a SQL Server instance with a valid certificate, please add the
TrustServerCertificate
parameter and set it to true in the connection string. For more details, please review this
article.
However, if you can successfully connect to SQL Server via SSMS, but still fail to connect to SQL Server from Visual Studio, I would like to recommend you post the question in the .Net Framework forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=netdevelopment . It is appropriate and more experts will assist you.
There are similar articles about error “The target principal name is incorrect” for your reference.
http://serverfault.com/questions/458935/aws-rds-sql-server-ssl-connection-the-target-principal-name-is-incorrect
http://www.derekseaman.com/2013/09/sql-2012-failover-cluster-pt-12-kerberos-n.html
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Unable to create P2V of Server 2008 R2 due to Error: 3210

I am attempting to create a Physical to Virtual Conversion of a Server 2008 R2 server that is hosting SQL 2008 R2 on it. When attempting to use SCVMM I receive the error below. When attempting to use Disk2VHD I receive the error that no boot device
can be found, but it did create a vhd(that is unbootable no matter what I did). Specs and error are below. Any help would be appreciated.
Target Hyper-V Host:
Server 2012, fully patched and hosting multiple VM's already
SCVMM Host:
Server 2012, fully patched running SCCVM 2012 w/ SP1 and SQL Server 2008 R2 (SCCVM and SQL are 180 day evaluation fresh installed)
Physical to Virtual machine in question:
Server 2008 R2 running SQL 2008 R2 (SQL is Full paid version)
Raid 1 (OS) and Raid 5(Data) setup on hard drives
Below is the error that is coming up in SCVMM when attempting to create the virtual mahine from the Physical:
Error (3210):
Boot and\or System volume \Device\HarddiskVolume1 was not selected or is not found on source machine SQL3.
Recommended Action:
Selected machine SQL3 cannot be virtualized. Verify that the boot and system volumes are selected for migration. Then try the operation again.

open disk management,
just give a disk lable to boot volume before scanning client system information , it works.

Unable to upgrade from SQL Server 2008 R2 to SP1

Hi there
I am currently in the middle of installing and configuring Sharepoint 2013 on a Windows 2012 R2 Virtual Server. I have first installed SQL Server 2008 R2 and then installed sharepoint 2013 including all of the prerequisites.
When I go to the SharePoint products configuration wizard, I get an error on the 'specify configuration database settings' page saying that I do not have the right SQL version as sharepoint 2013 needs SQL server 2008 R2 SP1 installed.
So I downloaded SP1 for SQL server 2008 R2 x86 but when I run the update, there are no instances for me to select to upgrade - it just says 'Shared Features'.
Sorry if this is a silly question - I am quite new to SQL!
Tom

Hello,
You probably have a 64-bit SQL Server 2008 R2 instance but you downloaded a 32-bit version of SP1 for SQL Server 2008 R2.
Please download the 64-bit version of SP1.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

P45 Neo3-FR - Unable to load Vista or Server 2008

Similar Messages

Maybe you are looking for