P45 Platinum USB issues on XP 64 Pro

My mouse (Logitech MX518) works only when plugged into one of the USB ports on my motherbeoad.  Any other port and it tries to detect new software - runs through the installation and I get a fatal error message - and the mouse does not work at all.  I can't get the Logitech Setpoint software to install either - when installing the drivers I get an error message.  I spent 2 1/2 hours on the phone with Logitech and they think it's a USB / Intel control issue.  I had a SM Bus controller error in device manager and I used the "INF Update Utility - Primarily for Intel® 4, 3, 900 Series Chipsets (2455KB)" which solved the SM Bus controller issue.  but I'm not sure that was the correct piece of software to use as the motherbeoad says its a P45 chipset.  The USB issue has existed since I powered up the machine yesterday - the Intel software installation did not impact the problem either way.  the MSI CD is useless as it doesn't seem to have any 64 bit drivers.  I've downloaded all from MSI that I can find and got the audio and LAN working but I still get the occasional blue screen for really no reason, just surfing the web and bam - blue screen.  am I missing something ciritcal for the installation?  any thoughts are appreciated on the best way to set up this 64 bit system. 

Quote from: mockymock on 24-January-09, 04:47:45
I'll look up the BIOS in a second
BIOS is                              A7512IMS V1.0 052108
I also made the change so it won't restart automatically if I get a blue screen.  And BIOS has USB Enabled. (I'm catching up!)
Alright, now I'm trying to make a bootable CD to update my BIOS. 
Update: Got the USB drive BIOS to function per the MSI Forum Flash Tool, but I get an error message - Error File ROM ID incorrect - and the BIOS doesn't update.  Still listed as V1.0 and should be V1.7.  My P45 isn't listed as supported for Sure Hands, so I haven't tried that.  Don't know if that ROM error is the reason my BIOS isn't updating or not.  I cleared the CMOS, etc.  Not sure why it isn't working.
You have pickup the wrong BIOS file. Latest BIOS for your board is 1.5 ==> http://global.msi.eu/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1479
1.7 doesn't exist.

Similar Messages

  • P45 Platinum Posting Issue

    I have a P45 Platinum Motherboard that I purchased from Newegg on the 14th. I recieved it on the 17th and built a brand new system with it from scratch. I'm using an intel E8400 Wolfdale CPU along with  4 sticks of 2GB G-SKILL DDR2 RAM (PC-8500) @ 1066. I'm currently using a BFG 8600 GT graphics card (soon to be a Sapphire 3870x2) and its all being powered up by a Rosewill PSU with 850 watts of power. All items purchased from Newegg (aside from the 8600gt, thats an old card).
    Here is whats frustrating me, and as you can see from the topic's title... my system doesnt post... sort of.
    Technically it does POST however it will only POST if i hit the "Clear CMOS" button located on the back of the system. Upon doing so, the system will act as though its booting up for the very first time. It will ask you to set up your CMOS configurations and once that is complete it will load up Vista right off my Harddrive with no problems.
    However..
    Once the system is shutdown or restarted, the system WILL NOT POST and I am forced to clear the CMOS again!
    Now... I have troubleshooted ALOT with this board... and I'm left with only two conclusions... either this board is defective (highly likely) or it just needs its BIOS updated.
    Ram sticks, video card, HDD, DVD drives... all have nothing to do with it! I can remove all devices and turn the system on with no memory sticks, and I will be left with 4 solid red lights (the ones that turn green after posting) and there will be no beeps of any kind to indicate I dont have memory installed. However... once i hit the clear cmos button then it will post and it will correctly see that there is no memory sticks... it will beep.. I will shut down... I will install devices... turn it on and it will POST.
    It appears it can complete the initial POST without issue, its POSTING for a second or a third time thereafter that becomes the issue...
    I need help with this in a desperate way...

    Quote
    So okay, heres whats bugging me in regards to my memory sticks. Your throwing out numbers like PC2-6400 but on the stick it says PC2-8500?
    So... is it incorrect or what?
    Let me try to explain a little more detailed:
    A given board/BIOS is not able to read the sticker that is glued to your modules but only the SPD Profiles that are pre-programmed into the SPD Chips of your sticks.  If you check those SPD-Tables with Everest, Memset 3.5 or Memory-Z (in BIOS) you can see for yourself that the "fastest" Profile is a JEDEC-Standard DDR2-800-Profile [CL5 @1.8V].  There is no profile for DDR2-1066 clock speed.  That is why whatever Board or BIOS you try, your modules will be detected and handled as DDR2-800 (PC2-6400) modules.  It is evident, that there is no issue here and there is no point in discussing this any further.
    So, what does the PC2-8500 rating mean?  It means, that G.Skill has tested these modules, which are essentially DDR2-800 sticks, up to DDR2-1066 clock speed with increased voltage.  Basically, G.Skill is giving you a permission to overclock these memory sticks by increasing the voltage above the 1.8V +/- 0.1V JEDEC-DDR2-standard without voiding your warranty.  Therefore they sell these modules as DDR2-1066 RAM.
    If your RAM was "real" DDR2-1066 memory, it would have to be able to operate @1.8V (DDR2 standard voltage) above 1000 MHz.  But in order to be to that the timings your timings would have to be relaxed to CL6 or CL7 depending on the chips used by the manufacturer.  In addition to that, there needs to be an SPD-Profile that tells the BIOS that these modules are DDR2-1066 and that it should set frequency, timings and voltage accordingly. 
    Furthermore, the P45 Memory Controller does not natively support DDR2-1066 modules.  That is why that rating is tagged with an "OC"-mark on the product page of the P45 Platinum. 
    This said, your only option to get these modules to DDR2-1066 speed is to manually set the clock speed and increase DRAM voltage in BIOS.  There is no other way to get there and it is also perfectly normal to do that. 
    Now, let's look at your actual problem:  The system is unstable as soon as you want to overclock your RAM to the DDR2-1066 rating, that G.Skill has promised you.
    There are a couple of reasons that can cause such an instability:
    1. Your memory modules are not up to the task of running at that speed.
    2. Your memory related BIOS settings (especially timing & voltage) are not properly set.
    3. The board is incapable of supporting such clock speeds above chipset specifications (remember: DDR2-800 max. according to Intel).
    4. The board's current BIOS is not optimized in such a way, that it can properly handle DDR2-1066 clock speed.
    I can assure you, that the board has no problems with DDR2-1066 in generell and I suspect that this is simply a BIOS related problem.  I have no issues getting my Kingston HyperX RAM to DDR2-1066 speed with BIOS v1.1b5.
    Quote
    I am still using the v1.0 Bios. I've already stated that I don't feel comfortable flashing my BIOS with something thats in Beta.
    Of course, I can understand that and it is generally not a bad idea to be careful with BETA releases.  However, in your case I believe the problem is rather BIOS related.  I had stability problems with DDR2-1066 clock speed with different earlier BIOS Versions as well (including v1.0) and I have tested more than 10 BETA- and Performance releaes so far.  BIOS v1.1b5 however allows stable operation @DDR2-1066 MHz.
    If you do not want to use flash this BETA, you will have to wait for an official release which can be expected soon.  This official release will be based on v1.1b5 and it could very well be the case, that v1.1b5 will simply be renamed to v1.10 and offered for download on the product page. 
    Quote
    And as I remember it, it supposedly voids your warranty if used??
    You can contact MSI Technical Support and describe your problem there as well.  I am almost sure that they will provide you with a more recent BETA BIOS in return (v1.1b5 or later).  If you want to be reassured by an official feedback from MSI Support, I suggest you contact them and see what they have to say. 

  • P45 platinum having issues with 8 gigs of Ram

    I just put together a new system. When I tried to install windows it kept giving me an error couldn't load winload.exe. I immediately thought I had a bad stick of ram. I ran Memtest with no errors reported. I tried taking 3 of the 4 sticks of ram out and then windowds would start to install fine. I tried every stick of ram this way and it all worked. Putting 2 sticks in is fine also (4 gigs total). Whenever I add 2 more sticks the board goes into an infinite reboot cycle. Having tested the different possible combinations of the sticks and the slots on the motherboard I am at a loss. Also this is OZC memory that is on the motherboards approved list and has been tested with it by MSI. Anyone know of others who have had issues with 8 gigs. Is there a bios setting I should try and change? Thank You!
    Bios version 1.3
    Bios settings are all default (auto)
    cpu q9550
    ram 2 of these for a total of 8 gigs. OCZ 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model OCZ2P8004GK
    MSI P45 Platinum LGA 775 Intel P45 ATX
    PC Power & Cooling S75QB 750W ATX12V / EPS12V SLI NVIDIA SLI Certified (Dual 8800 GTX and below) CrossFire Ready 80 PLUS Certified Active PFC Power Supply

    Quote
    Cant figure out how to upload the screen shot dont have a place to post it and link it.
    This is a good side to host pictures:
    http://photobucket.com/
    Here is the info from cpu-z
    slot 1 DDR2
    Quote
    Size 2048Mb  Correction None
    Max Bandwidth PC2-6400 (400mhz)
    Manufacture OCZ
    Part OCZ2p8002G
    Freq         333mhz  400 mhz
    CAS#          4.0        5.0
    RAS-CAS       5      6
    RAS prechar   5      6
    tras             15     18
    trc               20    24
    Voltage        1.8v    1.8v
    Okay, typical idiosyncratic OCZ SPD Profiles. 
    In Cell Menu, try these settings:
    DRAM Voltage = 2.0V
    MCH Voltage = 1.3V
    Spread Spectrum = Disabled
    Auto Disable DIMM/PCI Frequency = Disabled
    Save & Exit, shutdown your system, add the other memory modules and see what happens when you start your system.
    If that does not work, start again with only two modules, reduce memory clock speed to 667 MHz (FSB/DRAM Ratio = 1:1) and retry with four modules.

  • P45 Platinum memory issue(s)

    I've experienced some trouble getting my Corsair DOMINATOR TWIN2X-2048-8500C5DF G ver 1.1 memory modules to work as intended, ie at 1066 MHz
    (PCB ver 1.1 , E8400 at stock speed)
    BIOS ver 1.0 would not POST correctly, hanging at "Memory detection Test"
    After reading alot in Phily7 thread (same issues), I decided to try BIOS ver 1.1b5
    Some improvements. POST is now ok, and no need to manually reset CMOS everytime I've fiddled with the memory settings
    Tried DRAM voltages up to 2.196 Volts, but still the MB only recognises and threat them as 800MHz (Corairs home page says ver 1.X @2.2V, ver 2.X @2.1V)
    Tried to adjust the FSB/DRAM to 1333/1066, which causes the MB to reset itself until it says "The previous performance..."
    Tried by advice of "Jack the Newbie" to adjust memory timings to 5-5-5-18, Spread Spectrum disable and tRFC=53, which also ended up with " The previous.."
    Everest (trial version 4.5) read memory timings to @ 400 MHz   5-5-5-18  (CL-RCD-RP-RAS) / 23-51-3-6-3-3  (RC-RFC-RRD-WR-WTR-RTP)
    Any suggestion would be appricited?
    (Sorry for rusty english...)

    Yup, the thread was about getting all 4 memory modules up to 1066.
    I'm now running 4Gigs(2*2) of Corsair DOMINATOR 6400CL4 at 2.1V - flawlessly :-)
    The 8500 modules are on hold until a new BIOS is aviable, I don't wanne waste anymore time trying to make them work for now.
    Thanx for all replies
    RuneMT
    (P45 Platinum (1.1b5), E8400, Zalman 7700cu, 8Gigs Corsair8500/4Gigs Corsair6400, Sapphire 3870 Toxic (Soon 4870), 2*Seagate320(RAID0), 2*F1 750(RAID0), SB X-Fi Platinum , 600W MIST PSU, Cooler Master Mystique 632, Samsung BW226 and, YES, Vista Ultimate 64bit (for those of you who might have wondered))
    (No special need for OC when running Company of Heroes :-) )

  • P45 Platinum Firewire issue...

    Hello,
      I just replaced an old intel board for the new MSI P45 Platinum board, so far my system performance has been fantastic however, I am a musician and have a stand alone recording firewire interface (Presonus Firebox).  Pre-P45 my firewire interface worked without a problem.  However now shortly after a system reboot I lose sound from my device.  It still shows as if it is connected, however I get no audio.  Under the volume properties of Vista (32 bit) it shows as if audio is playing but nothing from the speakers.  I will have to reboot for it to work.
    Any suggestions!?
    Thanks!

    How often does this happen?

  • P45 Platinum fan issue

    I've been running a P45 Platinum mobo with an E8500 core 2 duo processor.   After the initial 3 or 4 minutes of usage, the CPU fan quickly goes to full speed for a few seconds, making it sound like a jet engine.  After a few seconds, the fan goes back to normal speed and stays that way.  This occurs each time after a cold boot.  Is this some sort of setting that needs to be changed, or simply how the mobo operates?  Looked through the manual and BIOS settings but haven't been able to see anything related.
    Thanks in advance.

    Or for those of us who won't/don't run "Core Centre" or any other OS based tweaking app....
    The BIOS can adequately control the CPU fan if set correctly and you don't use a joke aftermarket HSF. A correctly set up Smart fan will run the CPU fan at full pelt for a few seconds at switch on before chopping it back as the BIOS boots and starts control.

  • Q6600 @ 400Mhz on P45 Platinum - Having Issues

    Hi new to the forums.
    Frist off spec
    Q6600 G0 Stepping
    P45 Platinum - BIOS 1.6
    2 * 2GB OCZ 1066
    4870X2 2GB
    Problem i can't get it stable over 333Mhz and i only got that there by changing the jumpers not sure if i should just take them out for 333 - 400 but i don't no what its actural doing for one =[
    but yeah i either get BSOD or does not get past bios when i change it.
    my target is 400 Mhz FSB.
    i've seen someone get it up too 500 MHz at 6 muliplier but when i tired that it only came up with 2 cores so i don't get that either
    any help would be gr8 sorry for spelling and grammer i'm english there for the worst at my own language!

    Quote
    DOT is a feature from motherboard that enable you to apply overclock settings to motherboard and when you boot up your machine, the overclock settigns will be applied after the bios bootup, or after OS bootup.
    You are not talking about DOT (which is something else), but about "Mult-Step OC Booster":
    Quote from: mackarill on 22-April-09, 07:29:59
    Here are my current working settings
    -Cell Menu-
    Mult-Step OC Booster - Disabled
    DOT - Disabled
    EIST - Disabled
    CPU FSB - 400
    CPU Ratio - 8
    Enhanced setting - Auto
    NB drive configure - Auto
    FSB/DRAM ratio 1:1.00
    PCI Frequency - default
    Auto Disable DRAM/PCI Freq - Disabled
    CPU Voltage - 1.4575
    GTL REF0 - Auto
    GTL REF1 - Auto
    DRAM Voltage - 1.8
    DDR VREF A - Auto
    DDR VREF B - Auto
    NB Voltage -Auto
    NB GTL REF - Auto
    VTT FSB Voltage - Auto
    SB Voltage - Auto
    Spread Spectrum - Disabled
    Possible Settings (apart from "Disabled"):
    Mode 1 - OC Settings will be applied on the OS Level.  The OC Settings are not applied before or during POST Phase.
    Mode 2 - OC Settings are gradually applied after system startup (a certain degree during POST and the rest on OS Level).

  • A few questions about the p45 platinum...

    I'm doing water cooling and would like to know in case of pump failure, is there a thermal shutdown built in to my p45 platinum board?  I have a q6600.  What temperature will it shutdown at?  How do I enable?
    I'm planning to upgrade to a radeon 6970.  Are there any compatibility issues?
    I was running cpuid hardware monitor and noticed that my 12V rail doesn't show 12 volts.  It's shows 1.94V but my system is running fine..is this a glitch in reporting?  I have a corsair 1000watt power supply and only using about 300watts.

    Quote
    I'm planning to upgrade to a radeon 6970.  Are there any compatibility issues?
    I am currently using an R6970 card in my P45 Platinum: no issues whatsoever with this combination.
    Quote
    It's shows 1.94V
    That is an impossible reading.  Your system would not even be on, if that value was the actual voltage level.  As Henry said, don't worry about it.  No software solution and not even the values you see in BIOS can replace a good volt/multimeter.  There is a reason why a decent multimeter is usually more expensive than most high-end motherboards:
    http://www.amazon.com/Fluke-FLUKE-87-5-Digital-Multimeter/dp/B0002YFD1K/ref=sr_1_3?ie=UTF8&qid=1321096030&sr=8-3

  • Can I update or fix the hardware issue with my iPad instead of a usb  for my 2007 MacBook Pro

    Can I update or fix the hardware issue with my iPad instead of a usb  for my 2007 MacBook Pro

    Have no idea what you are asking about. What hardware issue? What does a USB and a 2007 MacBook Pro have to do with it?
    GB

  • Macbook Pro USB issue

    Hi All;
    I saw lots of discussions about USB problem of Macbook Pro, and i tried maybe all suggestions,  i couldnt solve USB issue
    I bought my Macbook Pro 13 inc, 500 GB, i5, OS X Lion, 2 days ago and this is my first Mac ...
    I cant see my external disk (Philips), Samsung Galaxy S by using USB ports (i tried both USB enterances, but not working).
    I checked my Hardware by Apple Hardware Test (extended test done) and it says 'No trouble found'
    I checked Utilities and USB devices are not written in the list, only 500 GB SATA disk shown.
    I uploaded MacFuse-Tuxera and ntfs-3g-2010 softwares for using USB devices but i cant solve the problem too...
    My USB devices are not shown in desktop and utilities lists
    How can i solve this problem, my devices work in Windows 7 - PC as usual, but in Macbook Pro, they dont work, please support me. I dont think that it can be hardware problem, Mac is new and devices are ok. Operating systems are different only.
    Thanks, Regards.

    I solved the problem about Samsung Galaxy S, now i can connect it by changing settings of GALAXY S.
    Settings>Applications>Development
    Than i plug phone to MAC and now i can see my phone on desktop
    I checked my PHILIPS external disk, unfortunatelly it is produced for only Windows operating systems, so i cant use it anymore
    My MAC has no USB problem, i can use my 3G USB device too, only Philips external disk failed.
    Thanks for your support...

  • MacBook Pro, USB issues after update to OSX 10.9.2

    09 MacBook Pro. OSX 10.9.2 . Recently updated.
    Flash drives and Go Pro Camera not appearing in Finder or iPhoto for import. However the flash drive appears under, System info/Hardware/USB.
    I read about many ideas such as resetting, PRAM, rebooting, etc.... About 5 hours of reading and trial and error last night. Nothing worked.
    I do have a battery that needs to be replaced, but my trial and error occurs while plugged in, so there is enough power. This did not begin to happen until I updated OSX.

    So far as the Go Pro connectivity, it was an issue on the Go Pro end. In order for the Go Pro to be found, I needed to remove all accesories. iPhoto still does not pick it up, although Finder did.
    Flash Drives still not found.
    Odd as I remember I used to be able to just plug in a device that had anything to do with pictures or videos and iPhoto would just automatically detect it and ask to import.

  • Mac Pro USB issue

    I have a weird situation. I have a Mac Pro 8 core 3.0Ghz with 13GB RAM, 4 SATA internal drives, 2 USB external 500 Western Digital Drives. I use bay one of the sata for OSX Tiger and Bay 2 for OSX Leopard (both purchased versions). The problem is when I'm in Tiger the USB drives have a through put of about 3MB and when booted in Leopard they have a through put of about 24MB. I can only guess that it's a driver problem, but I haven't been able to find anything about the fix. I did find that the WD USB Drives have a problem with speed. These WD drives are USB and SATA. When using them as SATA drives they work fine on both versions of OSX. The problem is I need the SATA connections for other drives and just want to use the WD drives as backup. Has anyone got any ideas why the drives perform normally under Leopard and not under Tiger?

    Hi southwos,
    That certainly is a strange one...
    I have heard of several USB issues pertaining to tiger updates, noteably, 10.4.11. It would seem some USB drivers were updated to fix several bugs, but inadvertantly, caused others. The solution it seems, is to rollback to 10.4.9.
    The symptoms of this 'unexpected feature' (sic) are that some USB devices seem to operate at USB1.1 speeds.
    This only affects a small number of devices, and its the chipsets in said devices that have the conflict.
    Certainly hope i have been of help
    Cheers
    Bryza

  • P45 platinum bios/oc issues / Click bios info

    damn board is annoying me, it's currently running bios 1.7b9 but it's being a twit, firstly getting it to run the memory at 1066 (I've got 2*2gb kingston hyperX pc8500) is proving really difficult yet it was easy on my previous gigabyte p35 board. The only success I have had so far is to knock the multi down to 11 from 12.5 and thats got me fairly close, cpu is an E5200 btw and currently at fsb of 341 with the ram at 511 , ram voltage doesn't have any effect though I haven't messed with the finer voltages which are on auto
    more annoying is the fact that it will do the power up / power straight back off thing 2 or more times when switching on before staying on yet is completly stable when it's on, also it seems to have trouble with the time which keeps changing when powered off, bios battery is fine and I've cleared the bios several times including with the battery removed
    I'm putting the time and possibly the power up issues down to the bios version as it was fine on the old 1.6, but is there any other bios between 1.6 and 1.7b9 that would be better to use or shall I just go back to 1.6?
    also this Uefi "click" bios which seems rather secretive and mysterious, noticed that there is one available for the P45 platinum but there is absolutly no info on it, has anyone tried it and is it worth me trying it?
    tia   

    Quote
    firstly getting it to run the memory at 1066 (I've got 2*2gb kingston hyperX pc8500) is proving really difficult
    Try:
    - DRAM Voltage = 2.1V
    - DDR_Reference Voltage Settings (Both): 0.9550V
    - Spread Spectrum = Disabled
    Quote
    more annoying is the fact that it will do the power up / power straight back off thing 2 or more times when switching on before staying on yet is completly stable when it's on, also it seems to have trouble with the time which keeps changing when powered off, bios battery is fine and I've cleared the bios several times including with the battery removed
    >>Posting Guide<<
    Quote
    also this Uefi "click" bios which seems rather secretive and mysterious, noticed that there is one available for the P45 platinum but there is absolutly no info on it, has anyone tried it and is it worth me trying it?
    If you expect it to solve system and memory overclocking issues:  No. 
    If you have no special needs for an UEFI Implementation (Software Wise): No.
    If you simply want to look at it and see how it works:  Well, go ahead.

  • P45 Platinum fan control issue!

    Ok i received a new MSI P45 Platinum board after my last one gave me nothing but problems and fried one of my Radeon Crossfire cards 
    Anyway the new one seems to be fine except one of my case fans seems sounds like it's spinning at full speed! I have case fans plugged into headers 1, 2 and 3 on the board and fans 1 and 2 can be controlled via the bios whilst fan 3 cannot! HWMonitor reports the correct fan speeds for 1 and 2 (running at 75%) and it tells me fan 3 is running at 50% but it's actually running faster and louder than the other 2!! With my old (faulty) P45 Platinum board the 3rd fan was quiet, but now it's very loud and i don't know why? I have the latest 1.6 bios installed as i did on my old board.
    Can anyone explain what is happening? Cheers 

    I installed the latest MSI Dual Core center and now it's telling me system fan 2 RPM is too low! (keeps flashing)
    CPU Fan =  around 1700 rpm
    SYS Fan 1 = around 1200 rpm (set to 75% in bios)
    SYS Fan 2 = around 700 rpm (set to 75% in bios)
    I'm not happy with this board... My last P45 Platinum had memory/CPU/PCI-E voltage issues but the fan speeds were perfect! And now this replacement motherboard has ok voltages but the fan speeds are screwed! Both boards are the same revision using the same bios and had the same system config.
    HWMonitor is still reporting fan 3 at 50% although it's literally screaming! Can someone please give me any suggestions as to whats wrong? Also does anyone have the latest beta bios (v1.7b10 i think). Cheers 

  • Issue with the line of 12+ on my p45 platinum

     Hi guys, i'm watching  long days ago, my line of 12+ go to   1.76 idle, and 4.80 load, why is the issue, i have at Antec Earthwatt 500w
    this my full ring
    MSI p45 platinum (bios 1.6)
    Intel Core 2 duo E8400 3.0 mhz (E0)
    2gb corsair ddr2 800mhz
    HD4890 Vapor-x 1gb ddr5
    Maxtor 500gb
    Please can u tell me if this is normal or i'm can have serious problem with it 

    ok thanks so much

Maybe you are looking for