P4515 spontaneou​sly prints the how to clear paper jam info page

hp laserjet p4515 prints the HOW TO CLEAR PAPER JAMS info page all by itself.  This happens throughout the day.   What can i do to stop this?  any help will be appreciated.
thanks
Joanne

just an fyi.. i am moving my question to business printing.

Similar Messages

  • C3180 Photosmart All-in-one won't print. Gives message 'clear paper jam.' There is no paper jam.

    C3180 Photosmart All-in-one won't print. Gives message  'clear paper jam.'  There is no paper jam.  About a month ago there was a paper jam, but was removed.  It worked fine since then until yesterday.  I've tried all the HP trouble-shooting suggestions- unplug, take apart, manually move carriage, etc. and nothing has solved the problem.  The paper does not advance...all that happens if I try to print is a lot of noise like carriage going back and forth and after a/b 1-2 minutes it will show the "red X" blinking on the printer and a message on the computer screen, "Clear paper jam."  When the problem first started yesterday the message was that the printer was "Out of paper."  I need to print a resume and this is just the wrong time for someone such as myself with little computer knowledge to try to figure it out.  Thanks for any suggestions!

    Hi there pattimessick,
    You may not need to remove/re-add. Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own (especially connectivity problems) and if not give a better idea of what is going on.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Cleared paper jam-printer continues to display clear paper jam-printer will not reset

    officejet 8500 909a- cleared paper jam, printer continues to display Paper Jam, clear paper jam then press OK, that does not work. followed all hp instructions and attempted to reset. does not reset. unit is less that 3 years old. can the problem be fixed or should I just buy another printer which by the way more than likely will not be another hp product

    Hello,
    Here are some common steps to clear the paper jam:
    http://h30434.www3.hp.com/t5/Other-printing-questions/False-Paper-Jam/td-p/905169
    Another helpful resource to clean paper jams:
    http://h30434.www3.hp.com/t5/Other-printing-questions/Paper-Jam-videos/td-p/331916
    Hope this helps.
    I work for HP.

  • How to clear paper jam in MX922?

    101 paper that came with the printer into the wrong tray. I fed it into the regular tray. Now I got the error message that said there's a paper jam inside. I've opened all the doors and trays that I could find but I didn't see the papers. I can't see the manual online for some reasons and Canon's help line is closed at this time. I couldn't finished setting up the CD driver because of the error message on the printer. I'm truely stuck. 
    Does anyone know how to clear up paper jam in MX922? Thanks.

    Hi jckny,
    Please click on the word "Troubleshooting" located at the link below to view video instruction on removing paper jams and obstructions from the printer. 
    PIXMA MX922 Instructional Video - Removing Paper Jams and Obstructions
    I hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How to print the text in only last but one page in sapscripts

    hiiiiiiiiiii,
             explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

    Hello,
    The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
    So u can handle the situation in ur form like this
    /: if &PAGE&  = &SAPSCRIPT-FORMPAGES&
    p1 TEXT
    /: endif
    Try in this way it may help u.
    Regards

  • How to print the same picture multible times on one page

    how can i print the same picture multible times on one page
    Message title was edited by: Brett N

    Select all of the images you would like to print in the Elements Organizer, then go to File > Print. In Step 4, choose Picture Package from the drop-down menu. In Step 5, click the option to Fill Page with First Photo.

  • Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other comp

    Adobe pro - print settings: How do i make a custom page size list, which i can copy to my other computers who have adobe pro installed?

    your right.. i ment acrobat pro :-)
    my problem is that i use the PDF printer to export CAD drawings as PDF´s.
    As it is now, there are some pre-defined page sizes in the print settings, and i know i can add custom pages manually one at a time.
    What i want is to copy the list of my danish standard page sizes, and use them on my other versions of acrobat.
    Its like 70 different sizes, and i have them made manually on my current computer, but i hope its possible to copy the list to other computers.
    Maby its some script where i can define the sizes, and then copy to another computer. Im just not that much of a computer genius :-)
    Hope i got through this without to many spelling mistakes...
    Thanks for helping.

  • I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    I have a new MacBook Pro, and when I try to print, the laptop says, "stopped filter failed 1 page". What can I do?

    Okay, regarding this problem:
    I'm trying to print to an Advent AW10 printer from an Imac running Yosemite 10.10.1 and it's been driving me nuts for the last two months...
    I got on to Advent yesterday and recieved this instruction from their support team this morning and it worked and I'm now printing away merrily:
    Please follow below steps:
    In Spotlight search window type Terminal and then press Enter.
    This should bring up the terminal window/program.
    In the Terminal type:
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf' then press Enter.
    It will ask for your password. Please enter system password.(You will not see password entering)
    After that type following:
    sudo launchctl stop org.cups.cupsd then press Enter.
    Try Printing.
    I don't think this is specific to Advent and is rather simply an 'opening up' of something blocking the 'printer channels' (layman's terms obviously)
    Hope this helps people out!

  • Officejet Pro 8500 wireless printer says there's a paper jam. No jammed paper found. Windows Vista

    Officejet Pro 8500 wireless printer says there's a paper jam. Have followed all the steps suggested on HP site...No jammed paper found.  Using Windows Vista.
    Read on ablog that there are sometimes false "paper jam" notices.  Anyone else experience this problem?   

    1cairobeller,
    Here is a link to a post where someone else had the same issue as you. In this post is a video that will walk you through some steps to fix this issue.
    Hope this helps !
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/officejet-pro-8500-wireless-says-clear-...
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Clear Paper Jam

    clear paper jam but there is no paper in printer

    Hi there,
    This article should help you clear your paper jam. Give it a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Have HP 1350, how do I clear paper jam? no visible paper shards in the printer.

    is there a secret to clearing a paper jam in HP 1350? 

    Hi there, I'm assuming your printer model is a HP Deskjet 3520 e-All-in-One? If so check out this support document for solutions to clearing a paper jam for this printer  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03258367&cc=us&dlc=en&lc=en&product=5162506&tmp...
    Hope this information helps.
    Best
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • PS6; print; PS print settings; color management; printer profile: how to get paper profile to "stick" for multiple prints of same paper type, ie Matte. Mine reverts to Luster as the default.

    see question

    Hola Gustavo,
    your task is for me not quite clear. I can see two scenarios:
    a) Calibrate the press for  ISONewspaper26v4 ink (your standard process) on salmon colored paper.
        Print the target by press on this paper, measure and build the profile. There is no problem so far.
        But preparing CMYK data with this profile for printing by press requires a very complicated gamut
        compression, becauses the gamut of the actual process on salmon paper is small and excentric
        in Lab. As mentioned in my previous post.
    b) Simulate the appearance of press prints on salmon paper, disregarding the salmon color by profiles.
        This shall be done in your case by a toner printer.
        The toner printer has to be calibrated with white paper. As a result one gets a valid Printer Profile.
        The proof printing happens for a CMYK file, for instance a PDF/X-1a file so:
        Input profile: ISONewspaper26v4
        Output profile: Printer Profile
        Printed on salmon paper!
        The printer profiling converts the toner printer into a more or less reliable proof printer. This has nothing
        to do with colored paper.
    Page 11 shows an example:
    http://docs-hoffmann.de/oki-ps-28082005.pdf
    Best regards --Gernot Hoffmann

  • How to print the all content of JTextArea to several pages

    Hi there, my application have a JTextArea and user can type text in. When the jbPrint button is pressed, the all content of JTextArea should be printed to papers. But now my application can only print out the first page even the content of JTextArea is 3-page length, does anyone can give me some clue or example? Thanks in advance.!! Really hurry!!

    Use freely downloadable smart jprint classes from http://www.activetree.com. This package also allows you to print contents of any kind of JTextComponent such as JTextField, JTextArea, JEditorPane, and JTextPane.
    Print the swing components with or without showing in the UI. Line breaking is done automatically for you and prints in multiple pages.
    JTable printing is specially interesting.

  • Hp photosmart all-in-one c 7280 will not print since clearing paper jam

    Had my first paper jam in 2 1/2 years - cleared out the paper but now when trying to print documents they just back up and a check-mark appears by the default printer beside the word "error".   I right click on the printer icon; cancel the backed up documents and the word beside the check-mark changes to "Off-line".   I set the printer to On-line and the word beside the check-mark changes to  "Ready".  
    I then send another document for printing with the above scenario repeating itself.
    I can make copies so am pretty sure the paper jam is cleared.  There's just no response to the Print command.
    Will appreciate any help - john t

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue, specifically the Print Diagnostic Utility.  
    It may also help to reset the printer as described here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to clear out personal info a preform a recovery

    I just bought a new HP laptop but want to clear out personal info and do a recovery to original settings.  I do not have restore disks and don't want to wait to order some nor pay for them.  My computer is a  HP Pavillion dv681 with vista operating system

    You will need five DVDs. Do not use no-name generic DVDs!  I use Verbatim DVD+R disks and have never had issues making a working recovery disk set. Creating recovery media requires the use of the power adapter. It must not be done while on battery power alone.
     List of DVD bland media rated by quality.
    While booted into Windows click on the start orb and select HP. You should see HP Recovery Manager and HP Recovery media creation. Now select the HP Recovery media creation. Click on it and follow the prompts. This may take  about an hour to complete with DVDs. 
    Newer notebooks allow the use of USB flash drives ( also known as thumbdrives) for recovery media. Your notebook requires a 16 GB thumbdrive to do this. This method is superior to use of DVD disks for a couple of reasons.  USB thumbdrives are far more durable and allow for incredibly fast recovery times. A USB flashdisk recovery thumbdrive will last five years or more depending on the quality of the thumbdrive. Buy a high quality one such as Sandisk, Corsair or OCZ. USB 2.0 is the standard. 
    Using the downloadable UBS recoveryflash disk creation utility.
    Best regards,
    erico 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

Maybe you are looking for

  • Opening/Closing System

    Hi Guys, In some cases, we open the SAP system to do some configuration for certain tables. We have to request the Basis team to open the SAP system..What exactly do we mean by this opening of the system? Are we allowing the customization of certain

  • GPIB communication with GPIB (NI PCMCIA-GPIB)card in Visual Basic

    I have a old program in Visual Basic which works fine in windows 98 using the desktop, but using my laptop with windows 2000 on it and NI PCMCIA-GPIB card it fails to communicate and running the program does not recognize the sendIFC command. I am ne

  • Shutting down 'tuxedo daemons' (or servers with long-time svc)

    eLink brings 'tuxedo daemon' idiom (in short: to have some client application booted and run from tmboot, restared on error etc, one should move 'main' contents to some service body, give it unique name and tpacall it from tpsvrinit). This is nice re

  • Why is the battery losing charge when not in use?

    The last two times I have charged my iPad it has then lost charge by the time I use it again. For example, when I left for work this morning it was on 100% but 12 hours later it is on 60%. No apps were open and the cover was closed so I can't underst

  • ITunes 10.4.1 will not install

    I have tried to update to the latest version of iTunes twice; both times have resorted to needing to restore the system to get iTunes to function properly. Has anyone else been having issues with the update