P45D3 Platinum and Intel VT
Hi,
I run a P45D3 Platinum board with a Q8200 CPU and 8Gb of RAM. I am running the latest bios for my card as of this writing: AMI v1.6 and cannot find a way to enable the Intel VT feature. This is preventing me from running 64 bit kernels in guest Virtual Machines on Windows Vista 64 host with VMWare server 2.0.1.
I also tried the UEFI BIOS with little success as my OCZ RAM does not bode well with UEFI BIOS version 1.2
Any pointer appreciated,
Eric
Hi,
actually, Virtualization Technology should be automatically enabled by default if it is supported by the processor. And here comes the crucial point:
Quote
Q8200
According to the Intel Product Site, this processor does not support VT (neither of its versions does):
http://processorfinder.intel.com/details.aspx?sSpec=SLG9T
http://processorfinder.intel.com/details.aspx?sSpec=SLG9S
http://processorfinder.intel.com/details.aspx?sSpec=SLB5M
Quote
Supported Features:
# Quad Core
# Enhanced Intel Speedstep® Technology
# Intel® EM64T 1
# Enhanced Halt State (C1E)
# Execute Disable Bit 2
# Intel® Thermal Monitor 2
For Comparison, this is the Feature list of the Q9300:
http://processorfinder.intel.com/details.aspx?sSpec=SLAWE
Quote
Supported Features:
# Quad Core
# Enhanced Intel Speedstep® Technology
# Intel® EM64T 1
# Intel® Virtualization Technology
# Enhanced Halt State (C1E)
# Execute Disable Bit 2
# Intel® Thermal Monitor 2
...which supports VT.
Have a look here as well:
http://ark.intel.com/cpu.aspx?groupId=36547
Similar Messages
-
P45D3 Platinum and OCZ Memory problem
Hi
recently i was set up my new PC with the following parts:
MAINBOARD:P45D3 Platinum
CPU:Intel Core2 Quad Q9400 2.66GHz
MEMORY: OCZ OCZ313332GK 2x1GB PC10600 DDR III RAM (DDR-1333) Recommended by MSI.
HDD: SEAGATE BARRACUDA ST3500320AS 500GB 7200 RPM
VGA: NVIDIA QUADRO FX 3400 256MB MEMORY
DVD: ASUS E818AT SATA
PSU:THERMALTAKE W0163 TOUGHPOWER 650W
the system running Windows XP Pro.
As you understand from the subject the Bios recognize the memory as 1066 GHz
and if i try to put the frequency to 1333 MHz the system can't start and freezes to a black screen.
I have made the upgrade of Bios to version v15 which according to MSI "Improve OCZ memory compatibility"
but nothing. >:(
Can you help me?
Thanks in advance.
Quote from: katoss on 14-November-08, 07:04:57
Hi
recently i was set up my new PC with the following parts:
MAINBOARD:P45D3 Platinum
CPU:Intel Core2 Quad Q9400 2.66GHz
MEMORY: OCZ OCZ3P13332GK 2x1GB PC10600 DDR III RAM (DDR-1333) Recommended by MSI.
HDD: SEAGATE BARRACUDA ST3500320AS 500GB 7200 RPM
VGA: NVIDIA QUADRO FX 3400 256MB MEMORY
DVD: ASUS E818AT SATA
PSU:THERMALTAKE W0163 TOUGHPOWER 650W
the system running Windows XP Pro.
As you understand from the subject the Bios recognize the memory as 1066 GHz
and if i try to put the frequency to 1333 MHz the system can't start and freezes to a black screen.
I have made the upgrade of Bios to version v15 which according to MSI "Improve OCZ memory compatibility"
but nothing. >:(
Can you help me?
Thanks in advance.
It said so in first post, dont tell me to read i always do, but dont get me started, seriously
punch in the number at ocz and this is what you get: http://www.ocztechnology.com/products/memory/ocz_ddr3_pc3_10666_platinum_edition
About the hijacking, my bad, my apologies, thought you were having difficulties too.
But enough said, ill stop helping, he will not accept whats been said here, have fun with him . -
P45D3 Platinum and DDR31600 - PROBLEM
Hi all ... I am new in this forum and I am sorry if you have already discussed my problem but I will ask you for help:
P45D3 Platinum - mainboard
My RAM modules are RAM2GDDR31600CRXMS3 CORSAIR TW3X2G1600C9DHX
TEST SPECS
? Each module pair is tested together at 1600MHz
? Tested and packaged in pairs
? Packaged together immediately following system test
? Tested together at 1600MHz, Vdimm = 1.80V, at latency settings of 9-9-9-24
? SPD programmed at: JEDEC standard 7-7-7-20 values at
1066MHz
The problem is that this RAM doesn't start working at 1600 - BIOS recognize as 1066
I flashed bios with the latest version but problem is still the same
Please explain to me all that I need to run this ram at 1600
Intel® Core™2 Quad Processor Q9450
ATi 3850x2, 1GB, Asus EAH3850X2/HTDI/1G, PCI-E, DDR3, 512bit, 2xDVI
ATX 650W, Spire Jewel 650, RealPower, 120mm, Silentat last i put:
DRAM Voltage (V) - 1,6
Advance DRAM Configuration-Configure DRAM Timing by SPD - there is no disable here
timings Cosair :
tcl-9
trcd-9
trp-9
tras-24
- i see here auto or manual - in manual i think SPD go disable
i dont know what i need to put for trfc and next so i put
trfc-58clk - maybe i need to put auto?
twr-4 - maybe i need to put auto?
trrd-4 - maybe i need to put auto?
trtp4 - maybe i need to put auto?
I adjust "FSB/DRAM" ratio until 1:2.0 "Adjusted DRAM Frequency" shows DDR3-1333 - it was max
and system run 1333
I make 3-4 hours gaming without problems
i stop to try to get 1600 - really i dont need it - i juts ask cause on memmory notice 1600
new queastions:
how i can test stability in WinXP - SOFTWARE?
About trfc,twr,trrd,trtp - what is the best that i can use?
Am i need to instal fresh copy of Win after finish my settings in BIOS?
I want to thx to all of you that help me!
Am new user of MSI hardware - before this new pc i had 2 Abit mobos-and i have little exp there with OC. -
P45D3 Platinum And G.Skill 4GB Dual Kit DDR3-1333 F3-10666C FREEZE!? HELP!
Hi there!
First sorry bout my bad english!
I bought yesterday the new p45d3 platinum mainboard and g.skill 4GB Dual Kit DDR3-1333 F3-10666C memory and i have this same problem that seems to be popular. The Bios works fine, but when installing xp sp3 from cd it always freezes in 6%. Every single time. Have tried to clear cmos and run the system with minimum hw in it but every time same problem.
Just when i changed from Abit to MSI i counter this same prob than with abit while ago.
If someone could be so gentle and help me out with this, thank you so much!
yours
AnttiFirst of all, what is your current BIOS-Version. It should be displayed on the POST screen:
https://forum-en.msi.com/index.php?topic=113146.0
Quote
Intel core 2 quad Q9550 (2,83)
Q9550, C1 or Q9550, E0?
Quote
G.Skill 4GB Dual Kit DDR3-1333 (2 X 2048)
Remove one of the two modules, clear CMOS with main A/C power cable removed from PSU, load "Optimized Defaults" in BIOS and set the following BIOS Option:
- Spread Spectrum = Disabled
- FSB/DRAM Rato -> 1:1.6 [=DDR3-1066]
- Memory Voltage/DRAM-Voltage = ~1.57V
Then try again to install XP. -
MSI x48c PLatinum and Intel E8600 Problem
Hello, I'm from Greece
My computer Setup is:
Mobo: MSI X48C Platinum (bios version 7.0)
CPU: INTEL CORE 2 DUO E8600
PSU: HEROLCHI 525 Watt
RAM: OCZ OCZ3SOE10664GK DDR3 4GB (2x2GB)
VGA: Albatron 8800 GTS
HDD: WD 300GB SATA
The problem is:
I bought them yesterday because i want to upgrade my system.
I connect them all properly in my case and after i turn the PC on it freeze in the MSI logo screen and cant even enter BIOS Setup.
The first time i turned the power on a message like: "Your previous overclockinn atempt was not succssefull. Press a button except del to load defaults and continue." i do what it said and freeze after that message.
This just the first time, the other times it just freeze on the logo screen. Some times it beeps one time and reset by his own and sometimes beeps four times and then reset. The most of the times it just freezes in the logo screen.
I took everything off and reinstall them. Nothing Happen.
I tried with one dimm of RAM each time in deferent positions. Nothing Happen.
I did o clear CMOS from the back button. Nothing Happen.
I perform a clear CMOS with the old method (unplug power, remove battery, wait for a couple o minutes). Nothing Happens.
I believe the problem is with the bios version i have and the CPU compatibility. I look at www.msi.com.tw and it said that this board its compatible with the INTEL E8600 but only at the 7.2 version.
How will i update my bios if my computer doesnt even enter bios setup?
Please help me. any suggestion. I'm losing my mind here!
Thanks you in advance.Quote from: triangle on 28-August-08, 17:00:43
the only thing i can suggest is to drop in a 7.0 compatible CPU (if you can) and flash the BIOS to 7.2 that way then switch back in your new CPU. A painful process, I know ... Alternatively, if your retailer is friendly they might set it up on a test bench for you and flash it.
Andrew
Like Andrew mentioned, this is the only way out though it is a long painful process.
The other is to get a board that is compatible to the E8600 right out of the box. -
P35 platinum and intel e8400 cpu
i am looking to update my cpu and i like the intel e8400 specs but msi are still doing test on this cpu and this mobo. HAS anyone got this cpu working on this mobo and did you have any problems that i should know about.. any help is thankfull in advace
Quote
but msi are still doing test on this cpu and this mobo.
Side Note: The status "Under Testing" only applies to the E0 stepping version of the E8400. The E8400, C0 is fully supported by the latest BIOS Version:
http://global.msi.eu/index.php?func=prodcpusupport&prod_no=1212&maincat_no=1&cat2_no=170&cat3_no=#menu -
MOVED: p35 platinum and intel.inf on windows 7
This topic has been moved to Operating Systems.
https://forum-en.msi.com/index.php?topic=123138.0Quote
but msi are still doing test on this cpu and this mobo.
Side Note: The status "Under Testing" only applies to the E0 stepping version of the E8400. The E8400, C0 is fully supported by the latest BIOS Version:
http://global.msi.eu/index.php?func=prodcpusupport&prod_no=1212&maincat_no=1&cat2_no=170&cat3_no=#menu -
Memory upgrade on P45D3 Platinum
Hello,
I currently use the following configuration:
- P45D3 Platinum motherboard
- Intel Core2 Duo CPU E8500 @ 3.175GHz
- 2x 1Gb Corsair CM3X1024-1333C9DHX 9-9-9-24
- ATI Radeon HD3650
- Bios v1.6
- Windows XP SP3
- no overclocking
I would like to upgrade to 4Gb (the purpose of this upgrade is to use Windows 7 on my PC)
My first idea is to buy 2 additional modules (2x 1Gb) of the same Corsair memory parts and to plug them on the 2 remaining slots of the motherboard.
But, according to the test report on memories for P45D3 Platinum found on MSI site, only the configuration with 2x 1Gb Corsair CM3X1024-1333C9 has been tested.
Should I understand that plugging 4 of these Corsair modules does not work on P45D3 Platinum?
Is anybody using P45D3 Platinum with 4x 1Gb Corsair modules (same modules than the ones I use)?
The alternative solution is to buy 2x 2Gb memory modules (one of those listed on the test report) but it will be more expensive.
Can anyboby help me to choose the right configuration?
Thank you
Best regards
DidierHave you considered installing the 32-bit version of Windows 7? 2GB RAM should be fine with that version. If you buy the retail version of Windows 7 you should get both the 32-bit and 64-bit discs.
You'll be able to run 4 x 1GB modules as the motherboard supports the following:
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600* (OC) DRAM, 8GB Max
It may not have been tested in the report but it should in theory be fine. -
P45D3 Platinum - System staggers with drive access
Hello all,
here is my config:
P45D3 platinum board
Intel 3.0G dual core
4GB 1333 DDR3 memory
Asus video with ATI 4870x2 chipset
3 HDD in RAID 5
1 DVD-RW on Sata
1 DVD-RW on IDE
Vista 64 Ultimate
The system is recently built and using the included raid driver. I also have the MSI utilities installed.
Upon load of OS, after logon, and anytime I do a drive refresh (such as starting My Computer), I see the system stagger in about 1 second increments for 7-10 times. The system runs great otherwise. The staggering stops the entire system for those brief instances. If it weren't for the slow booting due to the staggers I might just ignore it. Please chime in on your ideas as I'm out of them.
VolvernonWhat is the model of your RAM? Can you also list the PSU specs amps as well?
-
MOVED: P45D3 Platinum Motherboard Ram Settings and detection
This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=119831.0All right, sorry my first post.
# CPU brand, model and speed (eg AMD Athlon64 3000+ 'Venice' core)
QuadCore Intel Core 2 Quad Q6600, 2400 MHz (9 x 267)
# Motherboard model (eg K7N2 Delta2 Platinum, NOT just MS-6570!!)
P45D3 Platinum by MSI
# Memory brand, type/speed, size, number of sticks (eg 2x Crucial 512mb DDR400)
MDT Tech. MDT 1GB DDR3-1333 x2 in Dual Channel Mode
# Video card brand, chipset type, memory size (eg Gainward Geforce 6800GS 512mb AGP)
MSI Geforce 8800 GTX with 768 MB Ram
# Hard drive(s) brand, size, type, speed (eg 2x Seagate 200gb SATA150)
WDC WD1500AHFD-00RAR1 (150 GB, 10000 RPM, SATA)
WDC WD50 00AAKS-65YGA0 USB Device (465 GB, USB)
SAMSUNG HD501LJ (500 GB, 7200 RPM, SATA-II)
# Any other peripheral cards and devices (eg MSI TV@nywhere Plus TV card, MSI DigiVOX USB2 TV tuner)
Creative SB X-Fi XtremeMusic/Platinum Sound Card
Linksys Wireless-G PCI Network Adapter with SpeedBooster
# Operating system and version (eg Microsoft Windows XP Home Edition SP2)
Microsoft Windows XP PRO SP3
# Power Supply Unit brand and output in watts and DC output (amps)
Coolermaster Real Power 850 WATT
All i want to know how to run my ram at 1333 Mhz. Bios wont let me chose anything above 1066 Mhz. -
P45D3 Platinum Motherboard Ram Settings and detection
Well i have this motherboard and 1333 MhZ DDR-3 RAM (2*1GB dual channel kit by MDT).
The OC jumpers are at default which means 200 MHz FSB.
I have all on AUTO detection in the bios wherever possible.
The manual says Memory Support:
4 DDR3 DIMMS 1333/1066/800 MHz and up.
The problem i got is that my memory is only detected as 1066 MHZ and there is no way to get a higher setting with the standard settings you can choose, 1:2 being the highest.
What do i have to do to run my memory at 1333 MHz?
Bios is version 1,4All right, sorry my first post.
# CPU brand, model and speed (eg AMD Athlon64 3000+ 'Venice' core)
QuadCore Intel Core 2 Quad Q6600, 2400 MHz (9 x 267)
# Motherboard model (eg K7N2 Delta2 Platinum, NOT just MS-6570!!)
P45D3 Platinum by MSI
# Memory brand, type/speed, size, number of sticks (eg 2x Crucial 512mb DDR400)
MDT Tech. MDT 1GB DDR3-1333 x2 in Dual Channel Mode
# Video card brand, chipset type, memory size (eg Gainward Geforce 6800GS 512mb AGP)
MSI Geforce 8800 GTX with 768 MB Ram
# Hard drive(s) brand, size, type, speed (eg 2x Seagate 200gb SATA150)
WDC WD1500AHFD-00RAR1 (150 GB, 10000 RPM, SATA)
WDC WD50 00AAKS-65YGA0 USB Device (465 GB, USB)
SAMSUNG HD501LJ (500 GB, 7200 RPM, SATA-II)
# Any other peripheral cards and devices (eg MSI TV@nywhere Plus TV card, MSI DigiVOX USB2 TV tuner)
Creative SB X-Fi XtremeMusic/Platinum Sound Card
Linksys Wireless-G PCI Network Adapter with SpeedBooster
# Operating system and version (eg Microsoft Windows XP Home Edition SP2)
Microsoft Windows XP PRO SP3
# Power Supply Unit brand and output in watts and DC output (amps)
Coolermaster Real Power 850 WATT
All i want to know how to run my ram at 1333 Mhz. Bios wont let me chose anything above 1066 Mhz. -
I am stuck... !P45D3 Platinum
Hi!
My computer:
P45D3 Platinum
Intel Q9400 Quad 2,66
Samsung HD501LJ x 2
Samsung HD040GJ
Optiarc DVD RW
Crucial Ballistix 1 Gb (got one more not yet installed)
Sapphire Radeon 2650 Pro
Corsair CMPSU-750TXEU 750W
I have tried to solve this problem a couple of weeks without no success.
Bios doesn´t find any of my sata 500 GB disks, it´s only find the very old 40 gig (also SATA).. and my Ide dvd player.
I have tried to install Windows Xp, I comes as far to "Windows Xp begins" (in the installation process..) when a blue screen apears.
So I tested to install Ubuntu, with no problem.. (apart from that I am a beginner at linux, and got all the usuall problems....)
I wanted to try update my bios, but how ??..
the MSI Forum HQ USB Flashing Tool requires a windows installation on a computer with msi board..
I was plaining to use my old computer to unpack it in to an usb flash drive...
Please help!Quote
Beginning to think that also my harddrives died..
Well, you should check that first. It does not make much sense to keep trying things if you are unsure if the drives are even operable.
Quote
how can I get Windows to further work on my old 40 gig..?
Quote
when a blue screen apears.
What is the error message that appears on the blue screen? Please write down the STOP ERROR Code and check if a specific file is mentioned. -
Problem with MSI P45D3 Platinum
Hi, I've just built myself a new computer but it wont start. When I turn the power on on the power supply all that happens is a red led on the motherboard starts to flash. The led is under my graphic card on the right hand side of the board, I think its the led3 thats flashing. Nothing else works, the power supply fan and the cpu fan both dont run. The power switch on the front of the case does not work.
Is the red flashing led the standby led?
Any help would be great.
MSI P45D3 Platinum
Intel core 2 quad q8400 2.66ghz 4mb lga 775 fbs1333
XFX geforce gtx 260 576mhz 896mb pci-express 2.0 dvi
OCZ Technology ddr3 4gb (2x2) fatal1ty 1333mh
Western Digital Caviar se16 320gb s300 16mb
Best Value he 800w black 80+ high efficiency psu quad 12v 800tTry to push the onboard-power-on button and see if that changes anything.
In case the problem still occurs, please take the board out of the case and test it on a non-conducting surface in barebone configuration.
If that still does not solve the problem, test a different Power Supply Unit, maybe your's broke (had the same symptoms once with a broken Be Quiet PSU on a P45 Platinum).
Should a different PSU not solve the problem, RMA the board. -
Got P45D3 board as brand new today.
Hardware:
P45D3 Motherboard Bios seems to be 7513v12
Antech 500W 80+ PFS Power Supply
Intel Core 2 Quad Q9950 SLB8V
4x 1GB Geil PC3-12800 CL 7-7-7-24
GPU Albatron 9600GT-512X 512 MB DDR3 SLI
1TB SATAII Hardisk plus DVD RW
Put everything together, checked everything.
1 red led on. Pressed power, and all blue led's blinked once, cpu fan turned once, and nothing else happend.
No error beep nothing.
Tried other PS same problem.
Disassembled everything and assembled it outside the chasis,
and tried Motherboard 2x1 ram cpu and graphic card - Same as above - nothing.
Tried again without ram - samething
Tried again without ram and GPU - samething
Tried again with everything but this time changed the CPU to a Core2 E6850 - samething
All the above procedure was again tried with a MSI NX8500GT GPU
Once again tried everything with a different 500W PS - Still nothing happend.
By mistake I forgot to connect the CPU and GPU power connector. Now the board lights all led's but still its not alive.
Connected the CPU power again. And the board was dead as before.
Tried the same with only the GPU power connected, and again dead.
Moved CPU GPU and RAM to my P35 Platinum and after reset it came to life.
Why can't get the P45D3 to start up. Everything works but that Mainboard.
Something I'm missing, or do I have a dead board??????Quote
Quote
However I dont know which are the status leds, since this is not described anywhre in the manual.
Quote
and tried Motherboard 2x1 ram cpu and graphic card - Same as above - nothing.
Please test with one memory module only and try a different PSU while the board is sitting on a non-conducting surface outside the case.
Check the CPU Socket for bent and broken pins as well. -
P45D3 Platinum Unable to Overclock
The initial BIOS version(1.0) Overclocked just fine.But when I upgraded to the latest version of the BIOS(1.8/1.9) Problems began to appear. CPU FSB Frequency or CPU Ratio could not be modified even with +1Mhz , If do so save and exit bios restart system for the first time during Windows7 starting process after microsoft logo appear then suddenly blue screen then restart the system and bad things happened.CPU Fan running at full speed nothing shows on monitor,That's right The same situation with overclocking failure But this time reboot the system three times save system form failed overclocking mechanism won't work the only option is to Clear CMOS.After Cleared CMOS enter the BIOS Cell menu this time CPU Ratio shows 60.
My Hardware Specifications:
Mainboard:MSI P45D3 Platinum BIOS 1.9
CPU:Intel® Core™2 Extreme Processor QX9650 (12M Cache, 3.00 GHz, 1333 MHz FSB)
Memory:Corsair 4G DDR3 1600 CMX4GX3M2A1600C9 2G*2
It's seem the situation I described above is happened to those CPU Ratio adjustable Intel Extreme Edition Processor.
Wait reply....
regards..- Fixed system report incorrect memory size when install 4G memory.
- Support 1000 GB HDD.
- Support NV 9X series VGA card.
Because these fix and support are suitable for my situation.I am currently installing 12G memory and 2TB WD Hard Drive also NV 9X series VGA card are exactly in use.
I have tried many other versions such as 1.7 1.6 1.5 1.4 1.3 1.2 1.1 but the situation is the same。
Maybe you are looking for
-
Bought a mac pro without airport card.
Can find no information as to what I need or how to install it. I have an airport extreme card but it is apparently not compatible with the mac pro.
-
Server does not support PLAIN or LOGIN authentication
I try to send mail via XI Mail adapter. My settings are below Transport protocol : SMTP Message protocol : XIPAYLOAD url : smtp://10.44... Authentication Method : Plain User : ... Password... From : To : .... But i give this error "server does not
-
Reg: vender age analysis standard report
HI experts, We have standarrd report custmer aging analysis :RFDOPR10 like do we any report for vender aging analysis ? and please provide where can we get SAP FICO related standerd reports how to search ... thanks in advance. you will get reward
-
My facebook and twitter app don't seem to be working..
they are small and centered and small plus they aren't responding. I have re-installed it several times but still it won'twork. I have no idea what to do please help
-
Implementation of TableSorter class partially successful
Greetings, esteemed experts. I have successfully applied the TableSorter class to my table, and sorting occurs correctly in runtime. The sort is performed in ascending order, which matches the clients' requirement. However, the tooltip text for the s