P500 - Conexant Audio Issues

Hi there, i have a few issues with my Conexant High Definition SmartAudio on my P500. Running 32-bit Vista SP1.
1. I cannot record sounds internally. On every single computer i have ever used, there is a record option for "Stereo Mix", "Mic", "Line-in". Well, for some stupid reason, this laptop won;t let me record anything other than a microphone. I really want to be able to record sounds with my laptop esp when i am doing audio work. Yes, i will get an external soundcard, but for now, i have to live with this one. PLease help
2. I can;t seem to get MidiYoke to work either
Cheers, J

Have you been able to fix this issue?

Similar Messages

G510 Windows 8.1 Pro X64 Conexant Audio Driver Error and Driver Update Request

When are we to expect some updates in the drivers for G510, specifically for both graphics (Intel and AMD)
Also I am using G510S's Lenovo Power Management for Windows 8.1(running with no issues) as Windows 8 version was not compatible and there is no Win8.1 version.
And there is an update available for Conexant Audio in windows update and after the update when ever I play music, a few seconds in the Audio Device stops(a red cross on volume icon) and then troubleshooter automatically runs and fixes the audio device and audio comes back.
Also I would like to request that you bring back Dobly Advanced Audio v2 that was available with WINDOWS 8 version of the driver. It was just much more convienient and I liked its graphics equilizer much better.
K thnx
G510 - Windows 8.1 Pro X64
Core i5 4200M
Intel HD4600 & AMD Radeon HD 8570M

bump

[SOLVED]no sound on kernel 3.2.5-1 (alsa /how to patch conexant audio)

Hello
I'm not sure if I have to post this in Newbie Corner or Multimedia, if I'm false here please move the Topic.
I installed arch yesterday so I'm new to it. My hardware is a Thinkpad Edge e325.
Now to my issue, I cant get my speakers to work.
I've read about a few issues and people sugested to downgrade the kernel but is there any other solution?
I've already checked if alsamixer is unmuted and the only sound I could produce so far is a beep but nothing from vlc, amarok or audacious.
On win 7 I used the Conexant Audio Driver and already found a patch for alsa (http://www.linuxant.com/alsa-driver/) but shame on me, I cant figure out how to install it.
Hope you can help me.
Last edited by jayr (2012-02-17 10:37:40)

It seems the default ALSA soundcard is the HDMI output while the "regular" sound chip is recognized as card 1.
From blog.
Google for changing the default soundcard.

Conexant audio device driver won't install on T510 with windows XP SP2

I am having trouble in installing audio driver for Conexant audio device on an SSD with windows XP SP2 installed already. After running the installer, it tries for a while, and says media device can't be found. But booting from the win7-loaded internal drive, I can see it in the device manager. I also see a few devices like base system device(?) in 'Other devices' category. Could you help me get audio on the windows XP?
Solved!
Go to Solution.

Hi,
Thank you very much for your reply that led me to helpful information. Unfortunately, it didn't fix the issue, but I think I'm closer to the resolution of this issue.
So, I believed I installed Intel chip set and power management drivers, but did uninstall and re-install including .NET F/W 3.5. Unfortunately it didn't work.
Your link led to pages of unknown/driver-less drivers and made me check more detail. I had only 2 PCI devices left in 'Other devices' category, so I checked the details of those as below:
1. PCI\VEN_10DE&DEV_0BE3: I searched this item on the web, finding that the vendor is Nvidia, but could find device 0x0be3.
2. PCI\VEN_8086&DEV3B56: this is vendor Intel, but again no device found. The closest one is SoL device, though.
So, it appears somehow the Conexant audio device is not even in 'Other device' category, and the intaller can't find the device. I wonder if some other driver grabbed this device, so it's not available for driver installation. I will do more investigation, but please help me address this. Thank you again, and in advance.
P.S. : I don't see the SoL driver installed after installing Intel drivers, and there is no 'Ports' category in the device manager, either.

Lenovo U410 8.1 Audio Issues

I have owned the Lenovo U410 Ideapad for a decent while now and I have been consitently satisfied with its preformance. Recently I uprgraded to Windows 8.1 and it does not play any sound from any source. After some searching I found the software to fix it.
The "Conexant Audio Driver for Windows 8.1 (32-bit, 64-bit) â“ IdeaPad U310, U310 touch, U410,"
So of course I downloaded it, but the problem persists where sound does occur, with every 1/7 videos on Youtube, or sound lasts for moments but nothing is consistent.
Any solutions? It would be immensly appreciated.
Solved!
Go to Solution.

hi Squeaking_Lemur,
Welcome to Lenovo Community Forums!
Is the issue happening on local mp3 files(audio saved on your pc and not through the internet)?
Try opening Device Manager and open Sound, video, and game controllers Uninstall the conexant entry there and restart your system see if that will work.
If still non try this again
Conexant Audio Driver
Let me know your findings
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Audio issues - MANY

I have a Satellite L745D-S4220RD Laptop, which I bought in September.
Sound - is there NO control on the keyboard for this anywhere? Actually it really doesn't matter since the sound that's there is barely audible. If I stick my head down next to the speakers I can tell there's something coming out of it. Volume - and it's turned all the way up - is mostly non-existant.
I use Adobe Audition. I've used it on various versions of IE from 98SE to my new W7 machine. I know it works on W7 since I've installed it in other people's PCs at work as well. However, it seems that for me to record into Adobe Audition - I can't unless I use the internal mic. I tried to record a County Council meeting from their webstream - got nothing. Tried to record anything from winamp - got nothing.
Played with the settings and discovered something to boost the audio - which makes things louder, but to try to record with anything - now I'm getting errors, which are reminiscent of soundcard issues I had back in the old W98SE days if I tried to use anything but a mic or Real Player to record from into Audition. It couldn't handle Winamp either - course that was nearly 10 years ago and audio has advanced in nearly every PC I've had but this one.
Do you mean to tell me that in this day and buying a new laptop in 2011 the soundcard is this crappy?
Existing audio that I try to play is herky jerky and goes in & out and likewise sounds just as crappy.
I'm in radio - and planned on using this for work when I'm in the field - what I have is completely useless. I've used the laptop maybe 4 times - all of them trying to remedy the multitude of sound and audio issues that it has to mostly no avail. I get one thing working - and it screws up other aspects of the audio and sound.
Really regretting buying this laptop...........

You could try reinstalling the sound driver.
Conexant Audio Driver(v8.51.2.51; 07-25-2011; 59.4M)
Fn+3 and Fn+4 control the volume.
If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Lenovo update. Conexant audio features new driver and previous driver have the same version.

Hello to everybody!
I have a strange issue with Lenovo updater, when I try to update, it always displays already installed "Conexant audio features" here is the picture:
It's kind of annoying. How to fix it?
X220, IPS, Intel Core i7-2620m, 8 gb, Samsung 840 pro 256 gb, eGPU + Zotac AMP GeForce GTX 670.

they are working to fix the issue see this
http://forums.lenovo.com/t5/ThinkVantage-Technologies/System-Update-keeps-installing-same-package-ov...
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

SoftPhone over VPN audio issue

Having a "one-way" audio issue when IPC connects over VPN to any Main Office IP Phones (7960). Remote IPC (softphone) shows "0 Received" Packets, but the IP Phone shows them as being sent.
This does NOT happen if IPC contacts another IPC on a PC at Main Site, or any kind of phone at the other branch offices.
Have looked at all of the audio settings on the VPN IPC unit, they are correct.
Any ideas?

Try to sniff the Ethernet traffic during call setup at the CallManager. When Callmanager sends Call Control messages to remote party, it could send wrong IP address or UDP port as an RTP parameters.
Another components could block the traffic are firewalls. How do you have your VPN tunnel built? Do you use Cisco VPN Client? What terminates your VPN traffic at the central location? PIX, VPN3000 or Router? Traffic may go one way without a change, and some protocol FixUp may be triggered for this traffic on the way back. If you have access to firewall logs, check if you have any traffic dropped.
Good luck,
Mike
http://www.headsetadapter.com

Logic 9.1.8 & Mainstage 2 - crashing frequently/audio issues

I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur...

I have just uprgraded to this set up (though using the same sound card as I did on my Mac Book with Logic 8 & Snow Leopard prevously) - in order to avoid overloading which was happening on my previousl set up.. only to find that this new system seems very buggy - crashes frequently on Logic (Sudden Motion Sensor error - have disabled that now) and Main Stage freezes. Then a wierd echoey sound can happen - whereby any audio is echoed back from DAW, in Logic AND Mainstage.
I have down loaded two plug-ins/VST's since starting to use this new set up - an XILS Lab L.E. verision and a Crystal synth. I've downloaded the up to date Duet drivers from Apogee. (I have an Duet 1.5 that I used with my old set).
Have looked at the Console system log to try and understand what might be happening - it is FULL of text on occasions when Logic crashes - I am not tech savvy enough to unpick it though.
If anyone has any suggestions to help I would be grateful, thanks.
I do wonder if it is a Core audio issue though - given the echoiing that seems to occur...

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

My iPhone 5 is suddenly having audio issues through the headphone jack.

So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

Do the new iMacs have digital audio out through the headphone jack?
Yes.
http://support.apple.com/kb/SP576

Conexant Audio Speakers No Longer Working After Unplugging Headphones - X301

Hello,
I plugged in some headphones via the jack for the first time after owning my X301 for 2 months. Ever since then, the laptop speakers stopped working!!! If I want to hear anything, I now have to listen via my headphones. The beeping I used to hear when I plug/unplug the AC adapter is gone, too. I have Vista/32 Home Premium.
Here is what I tried so far:
-Pressed the mute/unmute button on the keyboard.
-Adjusted the volume via the keyboard and from the Conexant icons in the taskbar.
-Disabled/enabled the speaker and (and the microphone too) from the Conexant menus.
-Disabled and enabled the Conexant sound hardware from the Vista Device Manager.
-Updated the Conexant Audio Drivers from 4.92.5 to 4.92.7.0 and then back to 4.92.5 (rebooted).
-Enabled and disabled the beep options within the BIOS.
I have noticed when sound is playing, the Conexant software visually indicates (via the green bar) for the speaker, but of course no sound comes from the speaker! Lenovo tech support wants me to do a recovery or send the laptop in! Help!
Message Edited by toughluck on 08-09-2009 08:42 AM

Double posting because this seems to be a solution
Ignore my last post (or switch back to CLASSIC in the 3rd tab)! Might be wrong here but I think the mother jack (the one from the laptop) has a small contact pin to tell it if a jack is plugged in or not and that can get bent or something like that and tell the system the headphones are always plugged in. I got my speakers back by repeatetly plugging in and out the headphones jack with a little angle to the action, It just came back..
Just tried the same trick on a DELL mini and it didn't work... hope it does for you
Windows 7 64bit
Thinkpad X200s | CPU 1,86Ghz | RAM 4GB | HDD Intel x25-M G2 80GB

HP Slate 21 audio issue after KitKat update and reset

I have upgraded my HP Slate 21 from JB to KK. Now the sound quality is very bad!
I came directly from xxx.11 kernel and made factory reset but didn't get a good result. Please how can I fix this tremendous issue?

Hey @PauloTxR ,
Welcome to the HP forums.
I understand you're experiencing issues with sound quality on your Slate 21 PC.
Please review the following thread: HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity.
This fix will resolve audio issues of a software nature resulting in the KitKat update. If your issue persists after applying the specific update mentioned in this thread and have done a factory reset, the issue is likely hardware related and not the result of the KitKat update.
If you have done the above and continue to have problems please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

P500 - Conexant Audio Issues

Similar Messages

Maybe you are looking for