P55 CD-53 Memory mixing supported

Is it possible to mix 2 different speed DDR3 kits ?
Somthing like this:
DIMM1 & 3:
1333 MHz 9-9-9-24
DIMM2 & 4:
1066MHz 7-7-7-20

It may or may not work which means it can work just fine but it could also happen that will be facing major stability problems. There is no answer to this.  Test and see is the best answer anybody can give to you.

Similar Messages

  • Cannot Remove Backup files - not enough memory to support this procedure

    I Have SL510 and Windows 7 Proffessional. When I go to Thinkvantage R&R and click advanced dropdown box to delete backups there are no backups shown which can be deleted. I can however view backups but there are no buttons to delete. I'm stuck with 120GB of backups out of total capacity of 280Gb
    Help please.
    Moderator edit: Matched subject to content.
    Solved!
    Go to Solution.

    I have now eventually found a way to see the backups and to tick the box to delete selected backups. After running for a while I get a message that the system does not have enough memory to support this procedure.

  • When I open about this mac - more info and I switch through the tabs (display,memory,storage,support,service) it lags (fps drops, animation looks choppy not smooth). Why does this happen? (over 300 gb free,same programs installed,free desk-downloads)

    When I open about this mac -> more info and I switch through the tabs (display,memory,storage,support,service) it lags (fps drops, animation looks choppy not smooth) even though all the mac (programs , interface ) works smooth . Why does this happen? (over 300 gb free,same programs installed,free desktop-downloads -no garbage there- everything neat and tidy.) Need some help. Only there it the animations goes like 2 fps and is not smooth. I do not understand why because the programs are the same so its the usage. Nothing is changed, yet i experience this little issue for a couple of days.

    OK, I'm confused. When I do About this Mac > More Info in OS10.9, I don't see any animation other than the window resizing. Is that the animation you are describing?
    Which if any of the following apply to your computer:
    1) Are you running any anti-virus/internet security applications?
    2) Are you running any "cleaning/tune-up/optimizations" applications?
    3) Any peer-to-peer or torrent downloading software?
    4) Any third-party disk backup software that came bundled with an external hard drive?
    5) Any online backup scheme other than iCloud (Carbonite; GoogleDrive; MS One Drive)?
    6) Did your financial institution ask you to install Trusteer EndPoint Protection (also known as Trusteer Rapport)?

  • Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in.  Can this be corrected?

    Elements 11 the instant movie "In Loving Memory" mixs up the Photo/movie clips that i put in.  Can this be corrected?

    Howardok
    Premiere Elements 11 on what computer operating system?
    You should be able to right click the finished Instant Movie on the Timeline and select "Break Apart Instant Movie" to do just that.
    Then open all the tracks, expand the Timeline with the -+ slider above the Timeline, and edit your Instant Movie.
    Please review and consider. If you have questions or need clarification on the above, please do not hesitate to ask, but supply more details.
    Thank you.
    ATR

  • SoundBlaster mixer support under plain DOS?

    I have the following problem at hand - I want to run some DOS based programs (mainly old games and demos) which use SoundBlaster.
    When the integrated AC97 codec is enabled in BIOS and also the legacy SoundBlaster support (with 220, 5 and 1) and I have set the BLASTER environment variable, then the SoundBlaster is detected successfully, but the sound remains muted - it works, but can only barely be heard when I turn the external amplifier up extremely high. I believe the problem is in AC97 codec and BIOS which does not set the registers for the AC97 chip properly.
    Does anyone know of a DOS based AC97 mixer controller or any info on how to turn off the mute and turn up the volume of AC97 codec _in DOS_ so that DOS based programs can use the SoundBlaster emulation?
    My rig consists of MSI K7T Pro2-A under a 1GHz Athlon TBird and 512 MB of memory.
    Bratac

    It seems that I got this thing worked out. From the link given by Bas (thanks!) above I got the the AC97 mixer by Alex Mina, which actually does the trick, though from under Windows.
    So, I installed a barebone Win98SE, but didn't install VIA audio driver. Windows detected the BIOS enabled SoundBlaster Pro emulation and installed the crude SB Pro driver.
    At first it was like before - max amplification revealed sound working, but being muted like before. Now Alex's AC97 mixer helped - I was able to un-mute the global volume and PCM line volume of the AC97 codec, and voila - there was sound.
    Now I exited to MS-DOS and most DOS things work with SB Pro settings, even those that require the CPU _not_ to be in virtual x86 mode !

  • High performance in memory database supporting C++ and JAVA

    Hi,
    I am considering to build a Java compatible In memory database to speed up the application of JAVA. We have now the C++ version of the database, named MTDB, which is hundreds of times faster than phisical database. The in memory database runs on solaris, linux and windows system. MTDB supports load sharing, data distribution, and realtime data synchronizing. MTDB shows large capacity, great performance, stability, and scalability in telecom applications. Add JAVA access interface to MTDB is very valuable. Please send me email if you have interest in this.
    Thanks.

    Are you selling it? In which case advertisements are not appropriate here.
    There are a bunch of existing in-memory databases for Java which offer significant performance enhancements - unless yours outdoes them considerably I think you'll find a very limited market.
    Check out hsqldb.org for one example.

  • No surround mixer support for Audigy 4

    I have spent about 3 hours trying to find ways to get surrond mixer to work, and i dont have the cd. It looks like creative didnt even put any support on their downloads for managing speaker channels. Which makes the card useless for people who want SURROUND SOUND! Am I the only person have problems, i check all the downloads and there is no surround mixer to my knowledge, why is this so?

    get the cd from
    badboy.hub.io

  • Why isn't multipart/mixed supported in Mail?

    If I'm not mistaken multipart/mixed content types aren't supported in Mail.app and I'm told I should be using multipart/alternative despite the difference in the actual content for each part. In my case I have some text content and an rfc822 context so I figure I'm typing the thing correctly since Mail.app under OSX displays the rfc822 inline but the phone's Mail client simply complains.

    Just wanted to echo this post. Given that a lot I people keep on sending multipart/mixed messages, I have to say that simply not displaying them is very disappointing.
    The problem is that there are no alternatives whatsoever. Ok mail.app does not support it, but at least let the user download the source. I had my electronic tickets sent to me in such a message and had to figure out how the henk and when I can get my fligt having a dumb mail.app telling me that it won't download the rest. Come on!!! That's so frustrating.
    In my experience about 10% of mails are multipart mixed. Do you see me telling to my customers to use another mail programme? Please improve this one.

  • Gnome OSS mixer (support?)

    Hello all. Seeing as OSS came back to the official repos I finally went through the pain of installing it on my test setup (ALSA is blacklisted, user is in audio group, ossmix is set up, etc.)
    Sound works and all, however I'd like to be able to use the latest GNOME integrated mixer (which based on the OSS wiki page should support it). Sadly, it does not.
    OSS works fine (flashplayer is working, SMplayer with Mplayer2 is working) but not gnome test (in gnome settings).
    I have ossvol (for volume control, for now). Any idea on how to get the supposedly supported mixer working?

    You can use ossxmix if you really desire a GUI, but currently gnome, xfce and kde's native mixers don't work with oss4 unless patched. If you google arround you are likely to find a patch for your mixer, but these are mostly dirty hacks. Use ossxmix for now.

  • Macbook Pro, new and memory mixing?

    Can I mix a 4GB module with a 2GB module, i.e. making 6GB Ram on the system? 10.6.2 OS X.

    If the MacBook Pro was produced after June 5, 2007, yes.
    (51239)

  • Dual channel memory mixing on a K8T Neo2

    Hey all,
    I have a K8T Neo2, Winchester core 3000+ and had it running with 2 TwinMOS 512 MB-DDR400 sticks in dual-channel mode. Recently I decided to add RAM, but to invest in a more solid brand. So I bought a Corsair TWINX1024-3200C2 set and plugged it in. AFAIK the right combination in the board would be the have one set in slots 1 & 3 and the other set in 2 & 4. So far the board will only post with the Corsairs in 1 & 3 (and not with the Twinnies there). But if it posts, the clock is set to 333 MHz (which is an issue of the Winchester core I understood), but more importantly the system becomes unstable: reboots etc. Even stranger is the fact that sometimes after POST I get 8 beeps from the BIOS, which suggests that the Video RAM or framebuffer is defective. Is this somehow related to the RAM I installed? Is the framebuffer mapped to the RAM at bootup for example?
    I did try to change the command rate to 2T, didn't seem to help. Bios version is 3.3 by the way. Thanks for any help.
    Oh maybe the vid card specs are also relevant: Sapphire Radeon 9800 pro with 128mb. Power supply is Tagan 580W so unlikely to be the problem

    Quote from: Tiresmoke on 03-November-05, 23:54:30
    Have you tested each stick of RAM with Memtest86 yet? You may have a bad stick. You also may want to try the new set in a different socket sety. Another words if it was in 2/4 then try it in 1/3. If the timings are different on the two sets try setting to the slowest settings of the two. You may have to exchange the set for the twin to the old set just to make it work as mixing RAM rarely works well.
    Good idea on the memtesting, I'll do that tonight. I was afraid that the mixing wouldn't work well, but I thought at least if for each channel I used the same pair it wouldn't matter. Practice might indeed prove that as being a wrong assumption

  • Adding More Memory ~ Mixing Brands Ok?

    My 2.66 Mac Pro came with the standard 1GB. I later added another 1GB from DataMem. Now, I'd like to add another 2 GB...would I be better going with Crucial or staying with DMS?
    Thanks!

    Another way you could look at it is:
    - Your Mac Pro is peppy now and you want to increase some memory. By all means buy the 2GB now.
    - When your Mac Pro feels no-so-peppy, increase your memory by filling up the rest (to make all 4 banks filled)
    = Instant pep!
    From http://diglloyd.com/diglloyd/free/MacPro/memory.html
    The results show that using 4 modules instead of 2 offers at least a 70% increase in memory bandwidth. Dual-rank modules offer yet more performance than single-rank modules, with 4 dual rank modules offering twice the bandwidth of 2 single-rank modules.

  • Memory mixing

    I have a few sticks of PC2700 memoery, totalling about 1gb. I already have 512 of PC3200 in the motherboard, what will increase performance? Leaving the 512m and  not installing the other stuff (to take to 1.5GB), or have more memory running slower - the PC3200 will clock down to the slower speed automatically I gather??
    Thanks

    I would say on what you are doing with your computer.  
    You would probably get slower benchmarks with the additional slower ram,  but you would probably experience that the computer is runnning better with the additional ram.  Especially loading and exiting programs.
    If you are playing battlefield vietnam, I would say there is a great difference between 512 and 1 gig.  1 gig loada alot smoother and gameplay is better.
    I would run the extra ram if it works, and down the road get another matching stick of 3200.  But buy the exact same brand and speed if its working ok for you.

  • I can't download any music from itunes, says there is not enough memory to support the download

    I can not download any music from itunes, little box pops up and says there is not enough memeory to download?

    iCloud storage has absolutely nothing to do with local storage. You need to free up space on the iPad in order to download the movies. You can transfer some content into iTunes and then delete it from the iPad in order to make room on the device.
    Settings>General>Usage>Storage is where you delete content if you want to do it in there.

  • Is it right to mix sizes of memory modules in a mac mini 2012? for example 2Gb 8Gb?

    Is it right to mix sizes of memory modules in a mac mini 2012? for example 2Gb 8Gb?

    Welcome to the Apple Support Communities
    You can do that without any problem, always that the total amount of memory is less than the maximum memory your Mac mini supports. A Late 2012 Mac mini supports 16 GB of memory, and you can find in this site the steps to install more memory > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US#1

Maybe you are looking for

  • I want to have users submit the form in PDF format but it doesn't work using the email submit button

    Hi all, I have a form that I want to be returned to a specific email address as a PDF File. This is so that reservations people can open the pdf, and extract the information from it. Keeping it as a PDF will allow them to easily read and use the form

  • Problem with E-mu on Windows 7!

    Hi everybody! I've just bought E-mu Tracker Pre USB 2.0 interface. I'm working on a system Windows 7 Home Premium 32 bit and have some problem. Exactly the point is that when I plug the MXL 990 Microphone, I have a large noise in cool edit 2.1. B

  • PDF form sending data back as FDF

    Hi there, I created a pdf from a Indesign doc and opened it in acrobat 9 to use form wizard, I successfully managed to save and send the pdf from my mac to my partners pc. He was able to fill in the form but when clicking the submit by email button i

  • HP w1907v

    Hi, When I start my computer my monitor says VGA imput: NO SIGNAL  or something and after goes to sleep. I dont know my computer specs, but when I connect my monitor with my laptop the monitor works can someone tell how to fix it. My PC uses windows

  • How to find the Feeder class behind Incident creation in SAP EHS?

    I have a requirement where i need to change the message text after clicking "Send" button while creating Incident. How to find the feeder class and method which is called behind "Send" button ? Thanks, Vimal