P55-GD55 wont start again!

Hi Guys,
I'm new here. I hope the informations i will give to you can help me.
I have a P55-GD55 mother bord since 6 months.
But today, my computer start to freeze while im playing. So, i reboot, reboot and reboot again to get some performance. each time, the system start to be more slowly.
And after a boot, nothing happend. lost USB, black screen, etc. If i let the computer turn on for 5 mins. he turn off automatically.
Ive tryed a new PowerSupply, same thing.
And i dont know what to do now. I see 3 blue light (i think i must see 4?) on the motherboard.
I have read somes forums about this kind of trouble, and they talk about MB problem.
Does someone have some idea what i can check before send back the MB to MSI?
i've tryed the MB outside the case, without nothing except memory + usb device (mouse light to check if USB start) and nothing.. always this problem.
thanks for your help!
have a nice day!

Quote from: neimad on 25-October-10, 11:08:51
If i let the computer turn on for 5 mins. he turn off automatically.
Any idea how hot the CPU was running? It shouldn't shut down like that unless it gets too hot or there's a problem with the power supply.
Have you cleared the CMOS? >>Clear CMOS Guide<<

Similar Messages

  • Satellite A660 wont start again until i turn to safe mode

    Just purchase toshiba Satellite A660: i tell the story to compensate closely to my answer, hopefully ..
    I just purchase it new, run the insallation program for first use. When its up and running just within that day i noticed that it start to hang up when i hooked external drive for some program installation (adobe lightroom).
    Its still fine but when i turn it off, it wont start again until i did turn to safe mode so that i could back up some of the files and run the recovery again.
    This time on 64bit. When its finish its process, it works well for just a couple of hours.
    It fell faster now thou, maybe because its on 64bit? ( any recommendation whether its 32 or 64bit) specs: i5 , 4ram, 1g ddcatd graphics , win7 home premium, ..
    Now, when i turn it off it never start back again windows say.. start up repair. ..
    I did let it run since this morning until now still they cant find whats the problem (i'm refering the loptop) .
    So any idea on whats goin ?

    > It fell faster now thou, maybe because its on 64bit? ( any recommendation whether its 32 or 64bit) specs: i5 , 4ram, 1g ddcatd graphics , win7 home premium, ..
    64bit Operating system is better if your notebook supports 4GB or more RAM.
    Why? Because Win 32bit recognizes max 3.2GB even if more RAM is available.
    This is 32bit limitation; no matter what OS it is; Linux, Win XP, Vista, Win7 etc
    This is the reason why 64bit OS are so popular in the last time
    Regarding the OS issue;
    I recommend running a HDD recovery again... this means you should reinstall the OS usign the Toshiba recovery option;
    Press F8 while powering up the notebook, Choose Repair my Computer, -> HDD recovery

  • HT4623 im updating my iOS 6 then my battery completely drain when i re charged my battery my i phone 4 wont start again.

    im updating my iOS 6 then my battery completely drain when i re charged my battery my i phone 4 wont start again.

    I had the same problem updating to the new ios 6. It seem to have removed all my software and everything else from the iphone. It will not operate anymore...does anyone else have this problem? it just happen last night and now all i have is a sign on the iphone asking me to plug it into itunes ....when i do it tells me to restore it. I done this 3 times still the same results. frustrated

  • My screen suddenly turned black and wont start again

    I was using my computer as usual when the screen suddenly turned off. It wont start again! I'm a musician and work with my computer!! Today I have a show and wont be able to use it!! I'm desperate Please, can anybody help!!
    Thanks a lot!!!

    It sounds like you had a hardware failure. You can try doing a SMC reset, read the instructions carefully though as they cover multiple models of Macs. If that doesn't help I think it's time to contact a AASP. The AASP site is for the US, you will need to find one in Brazil though.
    Good luck!
    Roger

  • Im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    im up dating my i phone to iOS 6 then my baterry completely drain i forget to plug my charger,when i re charged my battery for 12 hrs my i phone wont start again i try to conect to my computer but it cant be read also.pls help

    Thanks too all the people who responded. . . . (noone)
    Got it sorted though. Seems that Apple has issues with multiple apple id's.
    Seems i had to somehow remember and use the original id i had when i first bought my 1st iPhone. . . .
    Even after that it was extremely hard to get my apps back on my PC.
    If anyone else has the same problem. . . .email Apple. Cya.

  • Msi p55-gd65 wont start up

    trying to build a new pc so i bought a Intel upgrade kit from komplett with
    Intel Core™ i7 Quad Processor i7-860 2,80GHz, Socket LGA1156, 8MB,
    MSI P55-GD65, P55, Socket-1156, DDR34 DDRIII, ATX, 2xPCI-Ex(2.0)x16, GbLan(Winki), OC Genie, DrMOS, Super pip
    Crucial DDR3 1066MHz 4GB KIT, CL7,Kit w/two matched DDR3 2GB, 240pin
    WD Caviar® Black 1TB 3,5", SATA,32MB Cache, Dual Processor, 7200RPM
    my old part are  600w x-power atx12v ver.2.2 compliant and nvidia 8800 gts 320mb gddr3-320bit-dual dvi
    and a Antec Twelve Hundred Big Tower Black
    problem is it wont boot up keeps stoping after about 5 or 6 secs and starts again
    ive tryed reinstalling ever thing again and using one stick of ram runing out of ideas
    help me please

    download the manual from msi site , then look at different light configuration and compare it to what you see on your board when it keeps rebooting, then from the manual you should see possible causes. i give you an example
    i see red  red blue red {each light can be blue or red or green,or off}.
    and on the manual such config gives the possible cause, cpu not sited properly or memory not installed..
    from what you have described it looks you have bios problem which means you have to return it to the seller or nearest msi dealer.
    http://i240.photobucket.com/albums/ff177/kourosh22/pp45.jpg

  • MSI P55-GD80 Wont start.

    Hey there.
    I just bought an i5 and MSI P55-GD80.
    But i got a little problem.
    My computer wont start?
    specs;
    Intel core i5 750
    MSI P55-GD80
    4890 Sapphire Vapor-X
    G.skill ripjaw PC3-12800 1600mhz CL8
    Samsung F1 Spinpoint 320GB 7200rpm
    NorthQ Black magic flex 650Watts
    First my computer startet but dident show any screen picture.
    But now it wont start at all? I have tried the case button and the "START" Touch button on the motherboard.
    I have also tried with a scredriver så the PWR pins.
    Wont start?
    What can the problem be?

    DIMM 1 and 3 is the Black DIMM slots. so be sure to put your memory there. 
    hope it works with you.
    Skaahr

  • P55-GD65 Wont start Phase 4 LED wont come on

    I just got a P55-GD65 and i got every thing on i have to say my PSU isint very good but i want to make sure that its a PSU problem before i go out bouying a 120$ PSU. The components are 2x2GB 2000MHZ OCZ memorys, an HD 4850 as video card and a i5 as the CPU, when i turn on it starts all the Phase LED's go on except for the Phase 4 LED, at first i tought it was a memory problem, i solved it puting both memorys in the black slot and it stoped beeping 3 times. but now it just turns on, all the leds go on except for the 4 phase led and after 4 seconds it goes off agian and goes back on and keeps doing the same thing over and over agian( going on and off on and off).... can someone help me ???!?  its not the video card i tested it in a friends pc, might be memory havent tested it  cuz i dont have another DDR3 supporting mobo.. PLZ HELP! im going crazy!! plz someone tell me its PSU!!!!
    PS i tryd it with a 450 wats Seventeam PSU

    Quote from: emer50n link=topic=132988.msg1000594#msg1000594 date=12595034a
    i did this procedure (clearing cmos and puting only 1 memo on 1 DIMM slot) now what happens is that every thing goes on i get no noises but nothing happens i get just a black screen and the video wont boot up(the pc wont turn off nowbut wont boot)... eny more ideas ?
    You have inserted ur RAM on the very first slot (The blue one) right?? ...... Insert that in the first black slot on left side, thats the 1DIMM slot..... If you wanna use ur 2nd ram as well, then insert that in the 2nd black slot.... I don't think its ur PSU.

  • HT1657 Movie only downloaded 20 mins worth then stopped wont start again. and I can even press play anymore. I want a refund

    movie says unknown error only downloaded 20 mins worth of the movie i watched up to 1 min and 15 second and everything froze up and this has never happneed before ive rented aleast 5 moives off itunes before with zero problems. and i want a refund because its a 48hour rental and i wont have time to watch it with in that time frame now. so i do i get back my 3.99

    Me Too, Help!!! it just started today and is driving me crazy , some one please help!!!!!!

  • Hp dv6-3032tx shut down and wont start again

    Hey guys,
    My HP laptop turned off and I cant start it anymore. If I press the power button it starts for 2-3sec, you can hear the fan, the LED is on but it goes out. The LED on the side for the charger is on if its plugged in.
    Already tried the reset. Probably the motherboard? How can I test it?
    Thx for the help
    Cheers

    Hello hiharu,
    Welcome to the HP Forums! I hope you enjoy your experience!
    I understand your computer will not start properly. I will do my best to assist you with this issue!
    Based on your description, the motherboard is probably to blame. To troubleshoot, please try the steps in this HP document: Computer Does not Start
    This document contains steps such as resetting the notebook and more, corresponding to the exact symptoms. I believe this document will resolve the issue. If not, I would contact HP phone support for hardware assistance. You can utilize this website to learn how to contact HP appropriately, based on your region: Contact HP Worldwide
    Please let me know if you have any other questions or concerns. Thanks for bringing this issue to the HP Forums. Have a great day!
    Mario
    I worked on behalf of HP.

  • IMac 27" 2011 - shuts down and wont start again

    Hi everybody
    I got my new iMac 27" intel i7 16 GB kingston ram for about a moth ago and worked perfectly until now.
    Suddently it shuts down and when I tried to turn it on again, there was no response. I then waited about 30 minutes and tried again and it turned on. I thought it might be a one time accident, but 10 minutes later it shut down again.
    When it shut down the first time it has been turned on for about 2 hours and I wasn't doing heavy work, just some surfing.
    Anyone else who has experienced this and found i solution for whats causing this?
    Are the any logfiles I can investigate to see what might happend?
    Regards

    As Roger suggests, RAM is likely your problem. Have a look at this long thread:
    https://discussions.apple.com/thread/2473276
    Another workround is to try running on 12gb of the Kingston RAM and see if that solves the problem.
    It seems that there is an issue with some makes of RAM and I believe that changing to Samsung RAM seems to fix things.

  • AFP Service Crashed and Wont Start Again

    I've got a 10.3.9 Server just running afp. It the AFP service just quit working yesterday while people were using it.
    Now I can't get the service to start up Clicking the "Start Service" button in Server Admin does nothing.
    serveradmin gives me this:
    Classof2009:~ root# serveradmin start afp
    afp:command = "setState"
    afp:state = "STOPPED"
    afp:status = -1
    The only thing in the logs might be:
    The server wasn't able to start (Unable to register IPC port)
    But thats only happened a few times and not every time I try to start the server.
    Crash Reporter shows nothing relevent either.
    Ive tried rebooting, disabling and re enabling the network interface, and clicking the "Start Service" button over and over!
    Help! I don't know where else to look!

    Is there anything in system.log after trying to start AFP? You can view system.log with the Console.app.
    Roger

  • Screen locksup wont start again untill I move mouse

    The screen locks up until I move the mouse. I have to move it constantly to keep the pages loading or to keep a video running. I read through other questions and answers but I didn't understand all of the answers. Any suggestions would be helpful. Thanks

    hello bdbcjb, multiple other affected users have reported that this was an issue caused by malware on their pc.
    please run a scan of your system with [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] and the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
    [[Troubleshoot Firefox issues caused by malware]]

  • Netboot service wont start up

    My netboot service has being working perfectly but for some reason the service was truned off and now it wont start again....
    I decided to use terminal to start the service instead of server admin.
    The response i get is:
    $ netboot:state = "STOPPED"
    $ netboot:status = 5000
    the apple command line manual says "you have not yet enabled NetBoot on any network port."
    What does mean and how do i reset this error to work?
    Pleas email repsonse!!

    the apple command line manual says "you have not yet
    enabled NetBoot on any network port."
    You may of already done this but just in case I thought I'd point it out. This error suggests that you have not enabled Netboot on one of your ports. To do so, go to the NetBoot service, click on Settings and Enable one of the ports. i.e. Built in Ethernet.
    Also, you need to make sure you are running NFS service and/or DHCP.
    I had a similar problem and I think restarting may have helped sort it.
    I don't mean to be patronising, just thought it might help

  • My G5 wont start

    After i upgraded my OS from tiger to leopard i had alot of problems like my creative suite CS2 wont start and crashes i remove it all as the guide said with all the files on the library and user and i reinstall it again and it works for few days and then i empty the trash and after i shut it down it wont start again, i have now the apple logo with the loading sign down of it and it stays for a while and then the fan sound stars to get loader and loader and thats it, can any one HELP?

    John,
    They're about $50 and up. Here's a laundry list of options... the preferred one here seems to be the Sonnet Tempo 2-port card. I don't have a SATA card installed, so I can't really advise you much more on which one to choose. I will say, though, that some cards/configurations have issues with waking from deep sleep, if you normally enable sleep on your Mac and it's important to you.
    Gary
    1GHz DP G4 Quicksilver 2002, 400MHz B&W rev.2 G3, Mac SE30   Mac OS X (10.4.5)   5G iPod, Epson 2200 & R300 & LW Select 360 Printers, Epson 3200 Scanner

Maybe you are looking for