P55-GD65 Wont start Phase 4 LED wont come on

I just got a P55-GD65 and i got every thing on i have to say my PSU isint very good but i want to make sure that its a PSU problem before i go out bouying a 120$ PSU. The components are 2x2GB 2000MHZ OCZ memorys, an HD 4850 as video card and a i5 as the CPU, when i turn on it starts all the Phase LED's go on except for the Phase 4 LED, at first i tought it was a memory problem, i solved it puting both memorys in the black slot and it stoped beeping 3 times. but now it just turns on, all the leds go on except for the 4 phase led and after 4 seconds it goes off agian and goes back on and keeps doing the same thing over and over agian( going on and off on and off).... can someone help me ???!? its not the video card i tested it in a friends pc, might be memory havent tested it cuz i dont have another DDR3 supporting mobo.. PLZ HELP! im going crazy!! plz someone tell me its PSU!!!!
PS i tryd it with a 450 wats Seventeam PSU

Quote from: emer50n link=topic=132988.msg1000594#msg1000594 date=12595034a
i did this procedure (clearing cmos and puting only 1 memo on 1 DIMM slot) now what happens is that every thing goes on i get no noises but nothing happens i get just a black screen and the video wont boot up(the pc wont turn off nowbut wont boot)... eny more ideas ?
You have inserted ur RAM on the very first slot (The blue one) right?? ...... Insert that in the first black slot on left side, thats the 1DIMM slot..... If you wanna use ur 2nd ram as well, then insert that in the 2nd black slot.... I don't think its ur PSU.

Similar Messages

My ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

I recently went to: settings, general, reset, and erase all data and settings, now my ipod wont start and itunes wont recodnize it, what happened and how do i fix it?

- After being connected to a charging source for half an hour, reset the iPod and then connect to your computer and it if appears in iTunes restore the iPod via iTunes.
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next see if recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

IMac G5 wont start up properly, nothing comes up on screen

Hi, my iMac starts up and nothing comes up on the screen. Then the fan kicks in to high gear and stays that way. How can i fix this problem?

Try starting from your install disk and using Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
Try resetting the SMU and the PRAM and let us know how you make out.

P67A-GD65 (B3) CPU phase LED always on

After BIOS update to the latest 1.C0 (I think), on-board CPU phase LED operates wrong. All 6 lights are always on, regardless of actual CPU phase state. MSI control center reports variable (depending on load) LED state meanwhile.

At this time please provide your full system spec. >>Posting Guide<<

DV6000 wont start (No LED lights or anything)

1. HP Pavilion DV6000
2. Windows XP 2005
3. Unable to get that far, so no error I know of.
4. No changes recently
Hello, I have been given a DV6000 from a friend to fix and he didn't have a charger so I bought a new one. The one I purchased is a DC359A AC Adapter, it is 18.5V --- 3.5A adapter which should be compatible with the DV6000. After plugging in the charger a blue ring around the plug lights up, but no additional LED's turn on. I have tried a hard reset and many other common fixes none have worked. Any help would be greatly appreciated, I am pretty decent with computers but this is one that I cant even find out whats wrong, I am only 16 so I would like to keep my spending down to a minimum for this fix. Thanks in advance, Ryan.

Alright I figured it out, in my task manager under processes it was still running so I closed it, now it opens fine

My ipod wont start up and wont connect to itunes

My iPod Touch 4g was jailbroken at ios 5, then I wanted to un-jailbreak it and update to ios 6.1.3. So without connecting to iTunes I just tapped software update in settings and about halfway trought downloading it shut down and rebooted, 10 seconds into start up (my ipod usually takes just over a minute) it turns off and reboots, it cuts out and tries again, this repeats until the battery is dead. iTunes does not pick up my iPod with full or no battery. Please help ASAP, I have nothing to take it's place until I get an iPad 5 when it comes out. (I am in New Zealand)

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem

Satellite U920 ultabook-tablet wont start

Hi everyone.
Just purchased the new Laptop/tablet 3 days ago.
Other than Windows 8 fustrating me death, the computer is wonderful..
until today.
Wont start !!
Lights come on... but now ones home..
I tried it with the battery as well as mains power.
When I press the start button...
the 2 / lights come on as usual.
Keyboard lights come on as well.
An thats about all that happends..
Eventually, after a minute, the computer will beep 3 times slowly then shut down.
No screen at all.. not even a light from the monitor..
Pretty annoyed as its only 3 days old...
Any advise ??
Cheers... Rob... Sydney

> Just purchased the new Laptop/tablet 3 days ago.
The new notebook should function properly if its not the case, then either the hardware or software cause the problem.
I think its hardware so why you dont get in contact with your notebook dealer and ask for new notebook.
Replace this unit and test the new one

Msi p55-gd65 wont start up

trying to build a new pc so i bought a Intel upgrade kit from komplett with
Intel Core™ i7 Quad Processor i7-860 2,80GHz, Socket LGA1156, 8MB,
MSI P55-GD65, P55, Socket-1156, DDR34 DDRIII, ATX, 2xPCI-Ex(2.0)x16, GbLan(Winki), OC Genie, DrMOS, Super pip
Crucial DDR3 1066MHz 4GB KIT, CL7,Kit w/two matched DDR3 2GB, 240pin
WD Caviar® Black 1TB 3,5", SATA,32MB Cache, Dual Processor, 7200RPM
my old part are 600w x-power atx12v ver.2.2 compliant and nvidia 8800 gts 320mb gddr3-320bit-dual dvi
and a Antec Twelve Hundred Big Tower Black
problem is it wont boot up keeps stoping after about 5 or 6 secs and starts again
ive tryed reinstalling ever thing again and using one stick of ram runing out of ideas
help me please

download the manual from msi site , then look at different light configuration and compare it to what you see on your board when it keeps rebooting, then from the manual you should see possible causes. i give you an example
i see red red blue red {each light can be blue or red or green,or off}.
and on the manual such config gives the possible cause, cpu not sited properly or memory not installed..
from what you have described it looks you have bios problem which means you have to return it to the seller or nearest msi dealer.
http://i240.photobucket.com/albums/ff177/kourosh22/pp45.jpg

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

P55-GD65 Power Phase LED Question

I had a question regarding both the power phase LEDs and the actual power phases themselves.
I noticed that the power phase LEDs light up and change according to the currently active power phase for the CPU based upon load using stock settings.
However, when I applied a mild overclock, increase the bclk from 133 to 160, the power phase LEDs stopped changing. They are all lit all the time. Does this mean the power phase is not changing, so I am losing the power savings benefit? Or is the power phase still dynamic, it just stops registering and reporting with the LEDs?
With the mild overclock applied and all power phase LEDs lit up, in BIOS under the green powere menu, I can see the efficiency number fluctuating, which makes me think the dynamic power phase is still in effect.
Does anyone have any insight into this?
Thanks,
--MrAnt--
System Specs
MSI P55-GD65 v1.5 BIOS
Intel Core i5 750 @ 2.66GHz
CM Hyper 212+ HSF
GSkill Trident 2x2GB DDR3 2000 - F3-16000CL9D-4GBTD (Running @ 1333MHz 9-9-9-24)
WD Caviar Black WD1002FAEX 1TB HDD
Corsair CMPSU-750TX 750W
Sapphire Radeon 5850 1GB

I have not gotten around to testing power consumption at the wall yet, currently in the process of moving.
I did find this thread:
https://forum-en.msi.com/index.php?topic=134762.0
The interesting thing I noticed, is that apparently APS worked with overclocking enabled in older BIOS versions. I am running BIOS v1.5, I know current is v1.8. Can anyone confirm whether or not APS is enabled with overclocking in BIOS v1.8?
I do not have MSI Control Center installed, but I will do that as soon as I can to see if I can re-enable the LEDs and check if APS is working or not.
If APS is working just fine and it is only the LED display that is broken, I have no problem with that. I actually would like the LEDs turned off, but I want to confirm that APS is working before I do.
--MrAnt--

My macbook wont start. it just comes to a black screen that sais no bootable device. -asian gal

My macbook wont start. it just comes to a black screen that sais no bootable device.

Ok then either the drive has failed or the cable from the drive to the logic board has failed or the drive is so corrupted that the computer doesn't see the OS on it.
Boot the computer from the original install DVD that came with your system. If your system is new and came with Lion then at startup hold down the Command+r keys and that will either boot you to the built in Recovery HD or to the internet recovery system. From either of those you can check the drive for error and or see if the computer even knows there is a drive in the system.

MSI P55-GD80 Wont start.

Hey there.
I just bought an i5 and MSI P55-GD80.
But i got a little problem.
My computer wont start?
specs;
Intel core i5 750
MSI P55-GD80
4890 Sapphire Vapor-X
G.skill ripjaw PC3-12800 1600mhz CL8
Samsung F1 Spinpoint 320GB 7200rpm
NorthQ Black magic flex 650Watts
First my computer startet but dident show any screen picture.
But now it wont start at all? I have tried the case button and the "START" Touch button on the motherboard.
I have also tried with a scredriver så the PWR pins.
Wont start?
What can the problem be?

DIMM 1 and 3 is the Black DIMM slots. so be sure to put your memory there.
hope it works with you.
Skaahr

So my daughter's ipad2 wont start up or its starting up and we just cant see it??? when i hold down the home button and the power button the apple icon comes on then goes away,the only way to see the screen is when you takescreenshot?????any answers????

so my daughter's ipad2 wont start up i think its on but you cant see anything unless you take a screenshot then you can see for a split second then nothing,and when i hold down the home button and the power button it will reset then i can see apple icon for a second then nothing?????

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

P55 GD65 Windows 7 wont hibernate?

Cant get windows to hibernate, i select hibernate, screen goes black then comes right back on to log in screen...
P55-GD65 (MS-7583) V1.5 BIOS Release
Any ideas

Quote from: ThumperSD on 08-July-10, 10:15:35
Go to BIOS and set your sleep mode to S3
Thank you for pointing me in the right direction, much appreciated.

MacBookPro wont start!!

Hello can somebody can help me...
My macbookpro most of the times wont start I can see only the LED on from the front of the laptop its the one when is on sleep mode I see that light only and the sound but doesnt start I always keep trying to start and sudenly after many times of pressing the power botton it will start I dont know why is like that whenever the laptop wants to start it will start and work normal but as soon I shut down I dont know if will start up or not because sometimes will start normal and most of the time dont start... I hope somebody can help me with this problem..
Paul.

First be sure to BACKUP your stuff immediately because your hard drive may be failing...
Here are some of my favorite maintenance tips
Disk Utility Repair Disk
http://support.apple.com/kb/TS1417
Pram Nvram
http://support.apple.com/kb/ht1379
try running this
http://www.maintain.se/cocktail/
101
http://www.apple.com/support/mac101/
Guide
http://www.gballard.net/macrant/osx_troubleshooting.html

P55-GD65 Wont start Phase 4 LED wont come on

Similar Messages

Maybe you are looking for