P6 Resource Report Errors
I've created a resource histogram by exporting the report in ASCII to Excel. Initially I set the timescale in weeks and the data/histogram was fine. I then took the same report, but changed the timescale to months. This time some of the data was not entered into the correct cells and some of the rows had to have cells inserted to bring data into line with the rest. Even the row showing totals was out of synch with the rest.
Am I doing something wrong or is this a bug in the system?
Many thanks.
I will second it being a bug, I have run almost the same report multiple times and every time I am forced to shift a couple of cells. I believe the date and totals are off.
One tip I found was to use a semicolon (;) as the separator instead of a comma. You can import it into excel just the same but it gives me a cleaner report.
Similar Messages
-
Reporting errors or exceptions back to the caller
I'm u sing OracleAS 10.1.3 and I'm exposing some of my PL/SQL procedures as web services. I was wondering what the convention is for reporting errors back to the caller. I read a little bit about Soap faults and some lack of support in the current JDev release.
Are soap faults the standard way of reporting handled exceptions? What about returning a record like:
type r_ws_response_string is record (
result varchar2 (4000),
return_code number,
error_message varchar2 (4000)
);... and having the caller check the return_code. Bad idea?
Any resources you can point is is appreciated (books/sites).
-Vahid PazirandehHi Toby,
Yes, I've come up with a working solution.
Essentially, I've made use of PL/SQL's OUT parameters and always reporting a status to the caller. At minimum, any procedure or function that I expose as a web service will have two out parameters: status, error_msg. The benefit of having a status being returned is that the caller can build logic based on different problems encountered, rather than just saying "an error occured". The error strings that you define are textual error codes, so they shouldn't change once you decide on an API.
The caller will always check for the value of status, if it is not 'SUCCESSFUL', then something is wrong. They can then log the value of error_msg so that their developers can figure out what went wrong later.
What's also nice is that the XML that's generated by JDeveloper looks clean when we're using one or more OUT params.
I don't know what the best way is to deal with this problem, but this works for me. :) Here's an example:
g_status_success := 'SUCCESSFUL';
g_status_bad_password := 'ERROR_INVALID_PASSWORD';
g_status_file_not_found := 'ERROR_FILE_NOT_FOUND';
g_status_unknown_error := 'ERROR_UNKNOWN_EXCEPTION';
procedure give_me_file(password varchar2,
status out varchar2,
error_msg out varchar2,
file out blob)
is
begin
if bad_password(password) then
status := g_status_bad_password;
error_msg := 'You entered the wrong password friend!';
return;
end if;
file := get_top_secret();
if file is null then
status := g_file_not_found;
error_msg := 'Your file could not be found';
return;
end if;
status := g_status_success;
exception
when others then
status := g_status_unknown_error;
error_msg := 'An unknown error occured. Please file a ticket.';
end;Regards,
Vahid Pazirandeh -
Hi,
After a sudden power failure, I guess vista file system is corrupt. I am able to start vista in normal mode, but it seems there are errors like Event Log service unable to start itself, when I start IE, it closes automatically ,
Norton antivirus does not start itself. and so on.
After Bing search, I went to safe mode and executed sfc /scannow and it reported error as below.
"Windows resource protection found corrupt files but was unable to fix some of them"
Unfortunately I am unable to upload log file, so I am pasting CBS.log content here.... Please advice.
Some parts of logs are removed due to limit of 60000 characters.
Please advice.
Regards
2014-07-07 14:55:57, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_0b4ada54c46c45b0\cbscore.dll
2014-07-07 14:55:58, Info CSI
00000001@2014/7/7:09:25:58.062 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x7147854e @0x714563a1 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000002@2014/7/7:09:25:58.156 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x714ae7b6 @0x71490f93 @0x341392 @0x341ed4 @0x3417cb)
2014-07-07 14:55:58, Info CSI
00000003@2014/7/7:09:25:58.187 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x6e9c8a50 @0x73981a0d @0x73981794 @0x34360b @0x342be3 @0x3417cb)
2014-07-07 14:55:58, Info CBS NonStart: Checking to ensure startup processing was not required.
2014-07-07 14:55:58, Info CBS NonStart: Windows is in Safe Mode.
2014-07-07 14:55:58, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL,
phase = 0, pdwDisposition = @0x2dfe70
2014-07-07 14:55:58, Info CBS NonStart: Success, startup processing not required as expected.
2014-07-07 14:55:58, Info CSI 00000005 CSI Store 4780952 (0x0048f398) initialized
2014-07-07 14:56:03, Info CSI 00000006 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:03, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:10, Info CSI 00000008 Repair results created:
POQ 0 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\ca20037dc599cf01650000007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa070f7dc599cf01660000007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
2: Move File: Source = [l:244{122}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aca137dc599cf01670000007806a403.program_files_common_files_d7a65bb2f0e854e7.cdf-ms", Destination = [l:156{78}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_d7a65bb2f0e854e7.cdf-ms"
3: Move File: Source = [l:278{139}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a8d187dc599cf01680000007806a403.program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms", Destination = [l:190{95}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_818c5a0e45020fba.cdf-ms"
4: Move File: Source = [l:286{143}]"\SystemRoot\WinSxS\Temp\PendingRenames\4ab11f7dc599cf01690000007806a403.program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms", Destination = [l:198{99}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_3c86e3db0b3b254c.cdf-ms"
5: Move File: Source = [l:292{146}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa12227dc599cf016a0000007806a403.program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms", Destination = [l:204{102}]"\SystemRoot\WinSxS\FileMaps\program_files_common_files_microsoft_shared_ink_en_7a951cedcb9a5105.cdf-ms"
6: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa28487dc599cf016b0000007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
7: Move File: Source = [l:208{104}]"\SystemRoot\WinSxS\Temp\PendingRenames\6aeb4c7dc599cf016c0000007806a403.$$_ehome_40103e2da1d
2014-07-07 14:56:10, Info CSI 121de.cdf-ms", Destination = [l:120{60}]"\SystemRoot\WinSxS\FileMaps\$$_ehome_40103e2da1d121de.cdf-ms"
POQ 0 ends.
2014-07-07 14:56:10, Info CSI 00000009 [SR] Verify complete
2014-07-07 14:56:11, Info CSI 0000000a [SR] Verifying 100 (0x00000064) components
2014-07-07 14:56:11, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
2014-07-07 14:56:19, Info CSI 0000000c Repair results created:
POQ 1 starts:
POQ 42 ends.
2014-07-07 14:58:29, Info CSI 000000b1 [SR] Verify complete
2014-07-07 14:58:30, Info CSI 000000b2 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:30, Info CSI 000000b3 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:38, Info CSI 000000b4 Repair results created:
POQ 43 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf01391100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a5ad3d4c599cf013a1100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:234{117}]"\SystemRoot\WinSxS\Temp\PendingRenames\cadfdcd4c599cf013b1100007806a403.$$_help_windows_en-us_b594929e73669c5e.cdf-ms", Destination = [l:146{73}]"\SystemRoot\WinSxS\FileMaps\$$_help_windows_en-us_b594929e73669c5e.cdf-ms"
3: Move File: Source = [l:228{114}]"\SystemRoot\WinSxS\Temp\PendingRenames\2a41dfd4c599cf013c1100007806a403.$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms", Destination = [l:140{70}]"\SystemRoot\WinSxS\FileMaps\$$_help_help_en-us_91e6e7979a9bf9c6.cdf-ms"
4: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea0ef7d4c599cf013d1100007806a403.$$_apppatch_1143992cbbbebcab.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_apppatch_1143992cbbbebcab.cdf-ms"
5: Move File: Source = [l:218{109}]"\SystemRoot\WinSxS\Temp\PendingRenames\ea241dd5c599cf013e1100007806a403.program_files_ffd0cbfc813cc4f1.cdf-ms", Destination = [l:130{65}]"\SystemRoot\WinSxS\FileMaps\program_files_ffd0cbfc813cc4f1.cdf-ms"
6: Create Directory: Directory = [l:48{24}]"\??\C:\Program Files\MSN", Attributes = 00000080
POQ 43 ends.
2014-07-07 14:58:38, Info CSI 000000b5 [SR] Verify complete
2014-07-07 14:58:38, Info CSI 000000b6 [SR] Verifying 100 (0x00000064) components
2014-07-07 14:58:38, Info CSI 000000b7 [SR] Beginning Verify and Repair transaction
2014-07-07 14:58:43, Info CSI 000000b8 Repair results created:
POQ 44 starts:
0: Move File: Source = [l:192{96}]"\SystemRoot\WinSxS\Temp\PendingRenames\eac6f0d7c599cf01a31100007806a403._0000000000000000.cdf-ms", Destination = [l:104{52}]"\SystemRoot\WinSxS\FileMaps\_0000000000000000.cdf-ms"
1: Move File: Source = [l:162{81}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa89f5d7c599cf01a41100007806a403.$$.cdf-ms", Destination = [l:74{37}]"\SystemRoot\WinSxS\FileMaps\$$.cdf-ms"
2: Move File: Source = [l:216{108}]"\SystemRoot\WinSxS\Temp\PendingRenames\6a4cfad7c599cf01a51100007806a403.$$_resources_fbee56ab048ab239.cdf-ms", Destination = [l:128{64}]"\SystemRoot\WinSxS\FileMaps\$$_resources_fbee56ab048ab239.cdf-ms"
3: Move File: Source = [l:230{115}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a61100007806a403.$$_resources_themes_4d0d4910e83c2273.cdf-ms", Destination = [l:142{71}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_4d0d4910e83c2273.cdf-ms"
4: Move File: Source = [l:240{120}]"\SystemRoot\WinSxS\Temp\PendingRenames\caadfcd7c599cf01a71100007806a403.$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms", Destination = [l:152{76}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_3fd78bf4cb5fa2c4.cdf-ms"
5: Move File: Source = [l:252{126}]"\SystemRoot\WinSxS\Temp\PendingRenames\8a7001d8c599cf01a81100007806a403.$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms", Destination = [l:164{82}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_a91dfa5124b343c4.cdf-ms"
6: Move File: Source = [l:276{138}]"\SystemRoot\WinSxS\Temp\PendingRenames\aa9408d8c599cf01a91100007806a403.$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms", Destination = [l:188{94}]"\SystemRoot\WinSxS\FileMaps\$$_resources_themes_aero_shell_normalcolor_10be8ec981b35fb6.cdf-ms"
7: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\cab80fd8c599cf01aa1100007806a403.$$_schcache_f995a5d4decb8cc0.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_schcache_f995a5d4decb8cc0.cdf
2014-07-07 14:58:43, Info CSI -ms"
8: Move File: Source = [l:212{106}]"\SystemRoot\WinSxS\Temp\PendingRenames\cad948d8c599cf01ab1100007806a403.$$_msagent_be90584645cb9b95.cdf-ms", Destination = [l:124{62}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_be90584645cb9b95.cdf-ms"
9: Move File: Source = [l:214{107}]"\SystemRoot\WinSxS\Temp\PendingRenames\4a7578d8c599cf01ac1100007806a403.$$_system32_21f9a9c4a2f8b514.cdf-ms", Destination = [l:126{63}]"\SystemRoot\WinSxS\FileMaps\$$_system32_21f9a9c4a2f8b514.cdf-ms"
10: Move File: Source = [l:242{121}]"\SystemRoot\WinSxS\Temp\PendingRenames\cafa81d8c599cf01ad1100007806a403.$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms", Destination = [l:154{77}]"\SystemRoot\WinSxS\FileMaps\$$_system32_manifeststore_7d35b12f9be4c20e.cdf-ms"
11: Move File: Source = [l:224{112}]"\SystemRoot\WinSxS\Temp\PendingRenames\aae18dd8c599cf01ae1100007806a403.$$_msagent_chars_9a5bcb5da392f588.cdf-ms", Destination = [l:136{68}]"\SystemRoot\WinSxS\FileMaps\$$_msagent_chars_9a5bcb5da392f588.cdf-ms"
POQ 107 ends.
2014-07-07 15:08:01, Info CSI 00000213 [SR] Repair complete
2014-07-07 15:08:01, Info CSI 00000214 [SR] Committing transaction
2014-07-07 15:08:01, Info CSI 00000215 Creating NT transaction (seq 1), objectname [6]"(null)"
2014-07-07 15:08:01, Info CSI 00000216 Created NT transaction (seq 1) result 0x00000000, handle @0x4cc
2014-07-07 15:08:01, Info CSI
00000217@2014/7/7:09:38:01.060 CSI perf trace:
CSIPERF:TXCOMMIT;5
2014-07-07 15:08:01, Info CSI 00000218 [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repaired
2014-07-07 15:15:58, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
Hi,
First, I would suggest you using last known good configuration:
Using Last Known Good Configuration
http://windows.microsoft.com/en-in/windows/using-last-known-good-configuration#1TC=windows-vista
if this cannot bring your Windows Vista back to good state, I suggest you perform in-place upgrade to fix the corrupted files:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support -
Revision: 1608
Author: [email protected]
Date: 2008-05-07 17:36:02 -0700 (Wed, 07 May 2008)
Log Message:
This checkin makes public our modifications to Batik, which improve how the MXML compiler reports errors in CSS syntax.
Bugs: -
QA: No
Doc: No
Reviewer: Jono
Modified Paths:
flex/sdk/trunk/modules/thirdparty/batik/resources/org/apache/batik/css/parser/resources/M essages.properties
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractDesce ndantSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractEleme ntSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractSibli ngSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/CSSLexicalUni t.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/DefaultCondit ionalSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/DefaultElemen tSelector.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/ParseExceptio n.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/Parser.java
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/Scanner.java
Added Paths:
flex/sdk/trunk/modules/thirdparty/batik/sources/org/apache/batik/css/parser/AbstractSelec tor.java -
DW reporting error line 9 and 10
Hi everything this site www.geekstotherescue.com.au was all
good to go until I input the keywords client sent me. then
Dreamweaver reported error (underlined lines 9 and 10 in red) I can
not figure out what caused this error. i do not have access to IE6
can someone check the site in IE 6 and let me know if it looks ok
and how I can fix the error?
thanks
Shontelle> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6.
So - there's your answer, then. Open the CSS file and see
what is redlined
there.
> I have heard that kewyords are not very effective
anymore but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
It's really up to you, but I do the "not to bother" part.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"shonts" <[email protected]> wrote in
message
news:fcplll$o8q$[email protected]..
> Hi thanks for ypur replies.
> 1. Peter: i should have checked validation before
positng here. I will
> fix
> the errors now. thanks
> 2. Murray: when i hover over the the red underline it
says not suporrted
> in
> IE5.5 and IE 6. I have heard that kewyords are not very
effective anymore
> but
> my clients seem to want them in I was taking the "the
having them in
> won't
> hurt approach" but perhaps i am better off just telling
my clients not to
> bother???
>
> regards,
>
> Shontelle
> -
Help! KT4V: DBracket reports error!
Hi
My KT4V DBracket reports error all the time.
Software and hardware run just fine, everything seems to be OK, but led no. 3 on my dbracket is red.
I've checked the manual and it says that this code means: "All resources assigned to ISA".
I have no idea what's going on!
Greets!
My spec:
MSI KT4V bios ver. 1.6, AMD Athlon XP 1700@2000 (10x166), 2x256 333 Mhz CL 2.5 DDRAM Samsung, Nvidia Geforce 2MX, HDD Seagate 30 GB 5400 RPM, CDRW LG 16/10/40.Thanks Bas
You might be right Bas, but expect this strange led lightning all the time, the dbracket is working properly!
When booting the leds are switching colours (led no. 3 too!).
When there was a problem with my gfx card mounted inproperly the dbracket reported that error correctly.
The problem is that in my country reseller has got 14 days to check my mainboard, repair it or replace with a new one! It means quite a lot of time with my comp "unplugged" :(
I have to be sure before reporting mobo failure... -
IF Condition in a PL/SQL Script give a report error.
Hello, Im German and I hope you can unterstand my Question.
First, I work with the HTML DB Version 1.6.0.0.0.87 and the Oracle Version 9.2.0.6.
I create a SQL Report, where a PL/SQL Script return the SQL Statement for the Report. This is my source-code, I have short it...:
Declare
sql_str varchar(2000);
sql_str_select varchar(1000) :=' select dim_sparte ... ';
sql_str_from varchar(1000) := ' from faktentabelle,dim_sparte ';
sql_str_where varchar(1000):= ' where and faktentabelle.zeit_id = :POPUP_ZEIT ';
sql_str_groupby varchar(1000):= ' group by dim_sparte.name, faktentabelle.zeit_id ';
Begin
If ( (V('POPUP_NETZGEBIET') is not NULL) and (V('POPUP_NETZGEBIET') <>
'Alle Netzgebiete')) THEN
sql_str_select := sql_str_select || ' ,dim_organisationseinheit.netzgebiet_name ';
sql_str_from := sql_str_from || ' , dim_organisationseinheit ';
sql_str_where := sql_str_where || ' and faktentabelle ... and
dim_organisationseinheit.netzgebiet_name = :POPUP_NETZGEBIET';
sql_str_groupby := sql_str_groupby || ' , dim_orga .... ';
End IF;
sql_str:= sql_str_select || sql_str_from || sql_str_where || sql_str_groupby;
htp.print(sql_str);
Return sql_str;
End;
This Script include a IF-THEN condition. The Condition is true and the sql-String-Variables are updatet.
I can get the string with htp.print() and the Statement is OK.
The report get a Error report error: ORA-1403: no data found. If I copy the printet sql String in a new Report Region with SQL String, the Report is OK. When I write IF(true) instead of IF( Condition) the Report is OK, too.
I try ist with Varibalen V(name) and with :name. Its always the same problem. I cant use IF-THEN-Else Conditions in a Script.
Please help me and say me what is the problem???
Thanks,
SimonaHi Simona,
In the sql region below the region source see that you have " Use Generic Column Names (parse query at runtime only)" check and not " Use Query-Specific Column Names and Validate Query".
This error you usually get when you have a mismatch in your report heading.
Vivek
[email protected] -
Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account. -
I have a form which uses a customer form/report, drop downs etc..
the debug shows it running this statement
...Execute Statement: begin begin SELECT distinct initcap(RTRIM (LTRIM (e.surname, ' *0123456789-/:.?,'), ' *0123456789-/:.?,') || ', ' || RTRIM (LTRIM (e.first_name, ' *0123456789-/:.?,'), ' *0123456789-/:.?,' )) empname, e.ID bulk collect into wwv_flow_utilities.g_display,wwv_flow_utilities.g_value FROM dms.dms_employees@dmsprd e, dms.dms_employee_contracts@dmsprd ec WHERE e.ID = ec.emp_id and e.surname like '%%' AND :p75_date BETWEEN ec.start_date AND NVL (ec.end_date, :p75_date) AND e.brh_id = 3654 ORDER BY 1; end; end;
Then says
"report error: ORA-06502: PL/SQL: numeric or value error: character string buffer too small"
Any Ideas?
Thanks
DeanDenes Kubicek wrote:
A select list is limited in size. I am not sure what the limit is but that is definitelly the case.The maximum size for the HTML generated for a select list is 32K.
86 options sounds on the low side to be hitting that limit, but there are other concerns to this as well. Scrolling through hundreds/thousands of options in a select list is a pain for users, and huge select lists produce bloated pages that impact load times and network bandwidth. That list of around 200 countries you find on many sites is about the sensible maximum length for a select list.
You should use popups.Indeed. -
The oracle application express environment is created by installing the HTTP Server on the windows server and the application express 3.2.1 components on the 11.1.0.7 oracle database on UNIX. The installation is successfully and have not seen any issues during the installation. After completing all the steps, when tried to login and click the application builder or workspace components, I see the error message
report error:ORA-06502: PL/SQL: numeric or value error: character to number.
This error message is seen on most of the pages when trying to accessed and not able to understand the reasons behind it. Its a brand new environment setup and not even presented to developers to test it.
Below error message is always seen when trying to access most of the components like application builder, schema comparison and some other tabs. Please advice
report error:
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Edited by: user589320 on Jun 9, 2011 5:17 PMI think its better you use APEX 4.x version ratherthan using old version.
You will get more features and some bug fixes and also it's easy for you to get some help when you need.
* If this answer is helpfull or correct then please mark it and grant the points. -
We face the above error in HTMLDB (APEX) application Ver 3.1.0. This occurs when we try to display more number of rows/records in drop-down list (LOV in tabular forms). We are able to display 200 records in LOV. When the list of records exceeds 230, we face the below error
report error:ORA-06502: PL/SQL: numeric or value error: character string buffer too small
the values listed in LOV are from tables (one of the columns in table)
Could anyone give us a solution?Hi
As you are using a tabular form, you could actually do the following:
1 - In the tabular form column's attributes, set the following:
Display as: Select List (query based on LOV)
Display extra values: Yes
List of values definition: SELECT null d, null r FROM DUAL
2 - Add a new page item and set it to generate your select list
3 - Create an HTML region with no template and use the following for its source:
<script type="text/javascript">
function loadList(c, l)
var s = document.getElementsByName(c);
var lItem = document.getElementById(l);
var lLength = lItem.options.length;
var k;
var j;
var x = lItem.innerHTML;
var v;
var o;
var z;
for (k = 0; k < s.length; k++)
z = s[k];
v = z.value;
z.options.length = 0;
for (j = 0; j < lLength; j++)
o = new Option()
o.value = lItem[j].value;
o.text = lItem[j].text;
z.options[j] = o;
z.value = v;
if (z.selectedIndex == -1)
z.selectedIndex = 0;
loadList("f05", "P1_MGR");
</script>
(Change "f05" and "P1_MGR" as appropriate to your column and your new page item respectively)
Now, when you load the page, the select list contains a null entry plus the entry already on the database. The javascript kicks in automatically, loops through every entry in the "f05" column, copies the existing value, replaces the select list with the new page item version and sets its value to the copied value.
Your new page item could be in a DIV tag that has a style of "display:none" to hide it from view.
Andy -
Hi everybody,
I have two Distinct Databases on two distinct servers. (Oracle Ent. Release 10.2.0.3.0 on AIX 5.3). After I install the latest patch last week, One of the APEX installation has some problems on Home>Application Builder Page. The error message is very random and
report error:
ORA-06502: PL/SQL: numeric or value error: NULL index table key value.
When i change the view (details to icons), everything goes to normal. This error message is reflected some of the pages (report region) of some of my applications randomly. When it appears in a report region, i deselect the order method of the region, the result is normal.
But the other APEX application on the other instance has no problem. It is a bug? or Should i re-install the APEX instance?
Thank you for your interest?
Gökhan ÇATALKAYANo, but we have a reproducible test case now so we're working on it. See ORA-06502: PL/SQL: numeric or value error: NULL index table key value
Scott -
PL/SQL function body returning SQL - report error:ORA-01403: no data found
Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated./* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
-
Hi Team,
I'm trying to run Invoice Aging report. When I'm running this it's erroring out. Here I'm posting log file
Receivables: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXRAXINV_SEL_SE module: XXXXX Invoice Print Selected Invoices OBA
Current system time is 20-JUL-2012 11:05:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_cust_trx_class='INV'
p_cust_trx_type_id='1'
p_trx_number_low='10040'
p_trx_number_high='10040'
p_customer_id='10041'
p_open_invoice='Y'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='1'
p_debug_flag='N'
p_message_level='10'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00103: lp_trx_date_clause = and a.trx_date = a.trx_date
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749: There is no remit to address defined for country IT and state .
REP-1419: '': PL/SQL program aborted.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1419: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 86
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 10040
MSG-43749
Report Builder: Release 10.1.2.3.0 - Production on Fri Jul 20 11:05:30 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Environment
Application: 12.1.3(OBA)
OS: Linux 5 - 64 bit
Please do the needful.
Thanks
Rk
Edited by: user11157039 on Jul 20, 2012 12:47 PMMSG-43749: There is no remit to address defined for country IT and state .Troubleshooting Remit To Address in Oracle Receivables [ID 1101855.1]
Transactions Workbench: Field Defaulting Logic [ID 1413565.1]
REP-0069: Internal errorARXAGE Aging 4 Bucket Report Errors REP-0069 Internal Error [ID 1321276.1]
Invoice Aging Report Errors With Rep-1419 Rep-57054 Rep-0069 [ID 1340456.1]
'Aging - 7 Buckets Report' ARXAGSW Fails with ORA-01722 [ID 1061714.1]
R12: Some Payables Reports Not Working. Same Errors In Log File: REP-1419, REP-0069, REP-57054 [ID 818320.1]
Thanks,
Hussein -
when i create a report based on a region source query, it displays fine. However the report attributes are weird just displaying column1, column2 and so on as the column details.
When i change the report back to Use Query-Specific Column Names and Validate Query instead of Use Generic Column Names (parse query at runtime only), the report breaks. The error message report error:
ORA-01403: no data found is displayed.
Why is that when i know the report ran successfully with the same queryIt's a sql query i use to build the report. I dont know about session states. Here is the source. It searches data across multiple columns using a search textbox that works. The query worked well before the change.
SELECT Issues.Issue_ID, Issues.Title, Issues.Initial_Issue_Description Description, staff.Developer_name Staff_Assigned, Priority_Codes.Priority_Code, Status_Codes.Status_Code,
Systems.SYSTEM, Modules.Module_Name, Sub_Modules.Sub_Module_Name , Issues.Application_Version,
Issues.Date_Logged, Issues.Created_By, Issues.Target_Date, Issues.Tar_Number, Issues.Last_Updated_By, Issues.Last_Updated_Date,
Issues_Responses.Issue_Detail, Issues_Responses.Issue_Detail_Author
FROM USD_ISSUES Issues,
USD_ISSUE_RESPONSES Issues_Responses,
USD_ISSUE_ASSIGN Issues_Assign,
USD_DBINSTANCES DBInstances,
USD_STATUS_CODES Status_Codes,
USD_PRIORITY_CODES Priority_Codes,
USD_SYSTEMS Systems,
USD_MODULES Modules,
USD_SUB_MODULES Sub_Modules,
USD_STAFF Staff
WHERE Issues_assign.Staff_id = Staff.Staff_ID (+)
AND issues.priority_code_Id= priority_codes.priority_Code_id (+)
AND issues.Status_Code_id = status_codes.Status_code_id (+)
AND issues.instance_ID = dbinstances.INSTANCE_ID (+)
AND issues.system_ID = systems.system_id (+)
AND issues.module_id = modules.module_id (+)
AND issues.sub_module_Id = sub_modules.sub_module_id (+)
AND Issues.Issue_ID = Issues_Responses.Issue_id (+)
AND issues.issue_id = issues_assign.issue_id (+)
AND (:P24_SEARCH IS NULL OR
INSTR(UPPER(TITLE) ||'/'||UPPER(PRIORITY_CODE)||'/'||UPPER(INITIAL_ISSUE_DESCRIPTION) ||'/'||UPPER(STATUS_CODE)||'/'||UPPER(issues.CREATED_BY), UPPER(:P24_SEARCH)) > 0)
order by title;;
Maybe you are looking for
-
Error 1603 in deploying Office 2003 by creating an application object using its MSI package!
Hello, I got the error of 1603 when I ran Office 2003 MSI package through NAL. I have no idea how to resolve this problem. Even though I enabled logging in Office 2003 installation, I still could not figure out what went wrong and what caused the err
-
Fifth time engineer has been to connect and still ...
This is getting ridiculous! I moved house a month ago and five engineers have been given the wrong info by BT and cannot connect my phone because I am apparently on a different exchange to the one on the order. I had the same problem when I moved to
-
Hi, I am working on a large project on labview FPGA but I'm a beginner in FPGA methods. The first step is to generate a sine wave in "real time" through one of the output of the PXI card. I chose to use a LUT, but I don't really know if it is the bes
-
Document, getting an Element by its Name, not Id
Is it possible to get an Element from a Document object by its Name and not its Id. I know there's a getElementById() but there is no getElementsByName(), although there is a getElementsByTagName(), too bad that doesn't help me.
-
I know it is very easy to do an iphone backup on iTunes but I really need help with this scenario My uncle has an iPhone 3GS and I am giving him my old iphone 5 as I upgraded to the 5s I am using my own laptop so it's not his own one where he has his