P6 Text Attachment moves
I assigned text attachments to some activities but whenever I open that report attachments move up or down the report, do not stick with these activities. Any suggestions??
Thanks Goran S.
user13064427,
Just in case you haven't tried this.....another option would be to utilize the built-in Notebook tool in P6. It provides you with multiple options for adding text or other graphics to the gantt chart area of your P6 schedules.
Be careful not to overload your notebook area with too many graphics.....may create a memory hog and crash your software. As a side note, these Notebook text boxes sometimes get crushed or squeezed after reorganizing the schedule. The notebook text boxes may have to be manually resized (future enhancement request). We have found that by simply placing your cursor in the gantt chart region and scrolling thru the activities relieves this problem.
hope this helps,
Similar Messages
-
How to download / read text attachment in Sender Mail Adapter IN XI
Hi
I would like to know how to download / read text attachment in sender mail Adapter & sent same attachment to target system using file adapter.
Please help how to design / resolve this concept.
Regards
DSRI would like to know how to download / read text attachment in sender mail Adapter & sent same
attachment to target system using file adapter.
Take help from this blog:
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
From the blog:
However in most cases
our message will not be a part of the e-mail's payload but will be sent as a file attachment.
Can XI's mail adapter handle such scenarios? Sure it can but with a little help
from the PayloadSwapBean adapter module
Once your message (attachment) is read by the sender CC, you can perform the basic mapping requirement (if any) to convert the mail message fromat to the file format.....configure a receiver FILE CC and send the message...this should be the design...
Regards,
Abhishek. -
Email with text attachment with line width 1250
Dear all,
I want to send the email with text attachment whose line width in text file is 1250. Kindly let me know how to send email attachment with more than 255 line width.
Regards,
Manoj
Moderator Message: Frequently Asked Question. Please search for available information before posting.
Edited by: kishan P on Apr 29, 2011 2:48 PMHi,
What ever text you are sending in the email, create a standard text for it using tcode SO10. In the program use the FM READ_TEXT to get the data into internal table which will be of length 132 char. If you want line widht of 255 chars convert using FM SX_TABLE_LINE_WIDTH_CHANGE as below,
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_dst = '255'
TABLES
content_in = it_data
content_out = it_mess_att
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
Use FM SO_NEW_DOCUMENT_ATT_SEND_API1 to send email.
Hope this will help you.
regards,
Tulasi. -
Why does text box move when I open pages doc on my friend's mac?
Hi Everyone,
So I have this very vexing problem with pages. I have been trying to collaborate with a friend of mine and everytime the pages document moves from one computer to the other the text boxes move terribly out of place. So for example, I will make a document and format it perfectly on my computer. Then I will email it to her (or put it up on dropbox or yousendit or zip it and email it) and without fail when she opens it on her computer the text boxes have moved and the document looks horrible, all my design work is totally wasted. The same thing happens if she starts a document on her end and then gives it to me.
Does anyone have any experience with this? Any suggestions?
Oh and by the way we are both running OS 10.8.2 and Pages 4.3
Thanks in advance!Hi Swati,
That was a shot in the dark. I remember that the now obsolete MacDraw would reset its margins to suit different printers. I had the thought that because Pages page layout seems similar to MacDraw, it was doing the same. I don't have a printer, so my print settings don't tell me much. Maybe Page Setup or the Print dialogue?
Let's hope that someone else has more ideas.
Regards,
Ian. -
Receiver mail adapter - Payload as a Text attachment
Hi,
In my proxy to mail adapter scenario, when i want to send payload to email as a Text email, where i need to content conversion in XI (XML to Txt file)
when i send payload, currently i am receiving as a XML file.
I try to follow like Rushikesh Deshmukh XI thread: Text Attachment in Mail Adapter in XI forum(topic)
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution."
Could you tell me exactly where i need to do all these setting and
do i need import localejbs/CreateAttachment Local Enterprise Bean XML2Plain...I mean shall i add same in my processing sequence
give in detail ? (in Receiver mail adapter Communication channel, advanced mode additional parameters)
I tried to follow this also
http://help.sap.com/saphelp_nw04/helpdata/EN/4e/c153426da9bd30e10000000a155106/frameset.htm
but i could not find much info on this help.sap.com reg. req.
Thanks
PrabaharanHi
f i create like this Receiver CC (module Tab)
number: 1
Module Name: localejbs/CreateAttachment
Module Type: Local Enterprise Bean
Module Key: mail
is it enough? do i need any other setting like this
Did you deployed CreateAttachment on PI server. As this is not a standard SAP module this is a custom module?
mail as module key is already used by XIMAILAdapterBean use some other key for CreateAttachment
Settings are fine for the Module
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
In this:
Module Key: XML2Plain
Parameter Name: Transform.Class
Parameter Value: com.sap.aii.messaging.adapter.Conversion
is it right?
Processing sequence is fine
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
can i anyone explain how to these settings?
Is this key valid to provide inputs to the module check with the code for this module
This looks like valid for MessageTransformBean ro StrictXMLtoPlainBean
Thanks
Gaurav
Edited by: Gaurav Bhargava on Oct 15, 2008 5:34 AM -
Receiver Mail adapter - Text attachment
Hi Folks,
sorry to post again & again same issue.
if i want to achieve (proxy 2 mail scenario) Payload as text attachment in email,
do i need to use below 2 modules in My receiver CC?
Number 1 as AF_Modules/StrictXml2PlainBean
Number 2 as AF_Modules/MessageTransformBean
is it right (the order which i used and Modules which i used)?
Screen shot link of my config:
http://farm4.static.flickr.com/3071/2951413865_498cb4f19b_o.jpg
http://farm4.static.flickr.com/3027/2951427759_d4d3097826_o.jpg
did i make any mistake on my config?
Rightnow i am getting Business content data in the email message inbox only. I am not getting Business data as a attachment.
do i need to use PayloadSWAPBean module also to achieve my req.?
Inputs reg. this will be helpful.
Thanks
PrabaHI Gaurav,
I tested again for ur Try
With XIALL option - i am getting 2 files in a attachment
file name: ATT00001.xml - control records -
output file name : Untitled.xml - Payload (business data)
file name: ATT00001.xml as a attachment in the email
- XI PAYLOAD with out any module( but default sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean - module will be there), with out keep attachments option
output file name : Untitled.xml as a attachment in the email
XI Payload with out any module ( but default sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean - module will be there), with keep attachments
any one has idea on this, plz throw some inputs
Thanks
Praba -
Text Attachment in Mail Adapter
Hi, I have Proxy-XI-Mail scenario.
I want to send the mail as TEXT attachment.But the Text is coming as Mail content.
I have having following config
Processing Sequence
localejbs/CreateAttachment Local Enterprise Bean XML2Plain
localejbs/sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration
XML2Plain Transform.Class com.sap.aii.messaging.adapter.Conversion
XML2Plain Transform.ContentType text/plain;charset=utf-8
XML2Plain xml.Header1000.fieldFixedLengths 100,10,10,30,30,80,80,20,10,10,20,20,30,10,18,240,10,30,18,10
XML2Plain xml.Header2000.fieldFixedLengths 100,30,40,240
XML2Plain xml.addHeaderLine 0
XML2Plain xml.conversionType StructXML2Plain
XML2Plain xml.recordsetStructure Header1000,Header2000
Please suggest some solution.
Thanks.
RushikeshHi,
Refer these blogs
http://www.sapag.co.in/SAP-XI-Mail-Adaptor-FAQ'S.html
The specified item was not found.
The specified item was not found.
eMail Report as Attachment (Excel/Word)
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
and also refer these links
http://www.riyaz.net/blog/index.php/2008/02/27/xipi-configuring-the-sender-mail-adapter/
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
Regards,
Suryanarayana -
Regarding text attachment in Email in ABAP program
Hello...
Need your expertise in one of the issues. Requirement is seems to be simple
but i am stuck up at this moment. i have refereed SDN with Several code but
some point its not giving the proper solution. So its a request to you please
do not provide any SDN link for reference as i am very much tried all of them.
please share piece of code.
Requirement : Need to develope one ABAP program, Email text attachment with Header line.thought its
very simple but still facing difficulties.
i have tried many code either its showing Data in single line without new line , in one of the Codes
data is coming in successive line but there is lot of spacing within Words means all alphabates are tab
separated. coud you please provide ,me the proper solution for this.
in one of the codes is working fine for excel but when Txt extension done data is not coming in successive line all
data is coming in single line.
Ex. Text file should contain 1 head and 4 colunns and Data size 50..
Thanks
NishiHi,
Another option....
Some sample code using cl_bcs .
Note the use of cl_abap_char_utilities=>cr_lf .
FORM mail_1_prep_10
USING
it_data TYPE table
CHANGING
ob_document_bcs TYPE REF TO cl_document_bcs .
DATA: txt_line TYPE string .
DATA: txt_data TYPE string .
* Create some text data .
DO 20 TIMES .
txt_line = '' .
DO 10 TIMES .
CONCATENATE txt_line '|' 'some data 01' '|' INTO txt_line .
ENDDO .
CONCATENATE txt_line cl_abap_char_utilities=>cr_lf INTO txt_line .
CONCATENATE txt_data txt_line INTO txt_data .
ENDDO .
* Mail stuf....
DATA: it_solix TYPE solix_tab .
CALL METHOD cl_bcs_convert=>string_to_solix
EXPORTING
iv_string = txt_data
IMPORTING
et_solix = it_solix.
DATA: attachment_subject TYPE so_obj_des .
DATA: attachment_type TYPE so_obj_tp .
attachment_subject = 'Some text data' .
attachment_type = 'txt' .
TRY.
CALL METHOD ob_document_bcs->add_attachment
EXPORTING
i_attachment_type = attachment_type
i_attachment_subject = attachment_subject
i_att_content_hex = it_solix.
CATCH cx_document_bcs .
ENDTRY.
ENDFORM . "mail_1_prep_10
regards.
This is how I see it in my mail : -
Need to link text within movie template
Hi all,
I downloaded a flash site template (some time ago) that I'm
just getting round to using. I don't recall if support was offered
when I bought the site. If so, I've long since lost the link to
that support. So, I'm turning here for help.
The site in question is www.plumbingsystems.net. Within the
template there are individual movies. One of these movies is
titled, "Text Area." I don't believe I can actually post this movie
for review but I'm hoping by posting the text layout under
"actions" that someone out there might be able to tell me how this
text can be formatted and, most importantly, if the text can be
linked to other URLs. Specifically, I want to take the text that
makes up the "Client List" text and link some of the client names
to external URLs with photos of the client's work. Here is how the
text appears within the "actions" panel of the Text Area movie:
text = "With decades of experience in commercial and
industrial plumbing, the owner and employees of Plumbing Systems
understand the needs of contractors. We provide expertise with
numerous specialty piping services, reliability in meeting
timelines and a commitment to working within
budget."+newline+newline+"Having worked jobs from 4,000 to 400,000
square feet and covered projects from commercial kitchens to malls
and medical centers, we’re familiar with the challenges of
both large and small scale projects. We can offer up everything
from planning and design of a job, to installation and
maintenance."+newline+newline+"Our ability to handle a project from
planning through completion has allowed us to build long-term
working relationships with some of the country’s top
companies. Take a look at our client list, projects and other
links. We think you’ll see why Plumbing Systems is the
logical choice for contractors looking to partner with success.";
Again, I need to know if/how this type of text can be made to
a live link to a URL. Is this possible? I'd appreciate any help.
This has confounded me, on and off, for a long time with these
types of templates.
LaurieThanks!
Robin Kramer
Technical Representative
Dartmouth Printing Co.
603.643.2220 ext 291
603.643.5479 fax
[email protected] -
Hi,
I want to send E-Mail as a .txt attachment.
I tried using FM SO_DOCUMENT_SEND_API1, but its giving the sy-subrc = 2 (I.E document_not_sent) .
Is 4.5B supports the text attachment ?
is any configration requried?
we have development and Quality clients this below code execuated in develpment sucessfully but when iam trying to test in quality client its throwing the error ( document_not_sent)
Below is my code
*--Data declearation
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: L_MSG(100) TYPE C.
* Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'Z2318S1B01'.
DOC_CHNG-OBJ_DESCR = EMSUBJ .
OBJTXT = 'your report from apple vacations is enclosed as
ATTACHMENT'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
* Creation of the document attachment
LOOP AT IT_ATTACHMENT.
OBJBIN = IT_ATTACHMENT-EMAIL.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'Airport Mainfest.txt'.
APPEND OBJHEAD.
* Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'BMP'.
OBJPACK-OBJ_NAME = 'ANLAGE'.
OBJPACK-OBJ_DESCR = 'Representation of object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
* Completing the recipient list
TRANSLATE EMAILID-LOW TO LOWER CASE.
RECLIST-RECEIVER = EMAILID-LOW.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
LOOP AT RECLIST.
IF RECLIST-RETRN_CODE = 0.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE E656 WITH L_MSG.
ENDIF.
ENDLOOP.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'error occurred in sending mail' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ENDIF.
Thanks
Vikranth KhimavathHi,
I want to send E-Mail as a .txt attachment.
I tried using FM SO_DOCUMENT_SEND_API1, but its giving the sy-subrc = 2 (I.E document_not_sent) .
Is 4.5B supports the text attachment ?
is any configration requried?
we have development and Quality clients this below code execuated in develpment sucessfully but when iam trying to test in quality client its throwing the error ( document_not_sent)
Below is my code
*--Data declearation
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: L_MSG(100) TYPE C.
* Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'Z2318S1B01'.
DOC_CHNG-OBJ_DESCR = EMSUBJ .
OBJTXT = 'your report from apple vacations is enclosed as
ATTACHMENT'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
* Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
* Creation of the document attachment
LOOP AT IT_ATTACHMENT.
OBJBIN = IT_ATTACHMENT-EMAIL.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = 'Airport Mainfest.txt'.
APPEND OBJHEAD.
* Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'BMP'.
OBJPACK-OBJ_NAME = 'ANLAGE'.
OBJPACK-OBJ_DESCR = 'Representation of object 138'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
* Completing the recipient list
TRANSLATE EMAILID-LOW TO LOWER CASE.
RECLIST-RECEIVER = EMAILID-LOW.
RECLIST-REC_TYPE = 'U'.
APPEND RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC = 0.
LOOP AT RECLIST.
IF RECLIST-RETRN_CODE = 0.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'The document was sent' INTO L_MSG.
MESSAGE E656 WITH L_MSG.
ENDIF.
ENDLOOP.
ELSE.
CONCATENATE RECLIST-RECEIVER ':'
'error occurred in sending mail' INTO L_MSG.
MESSAGE S656 WITH L_MSG.
ENDIF.
Thanks
Vikranth Khimavath -
E-Mail as text attachment Exception
Hi,
When iam sending E-Mail as a text attachment iam not able to send email.
<i><b>exception occured ( document_not_sent )</b></i> This is the error what iam getting. Below is my code.Please help me.
DATA : DOC_CHNG LIKE SODOCCHGI1,
OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE.
DATA: TAB_LINES LIKE SY-TABIX,
L_MSG(50).
* Creating the document to be sent
DOC_CHNG-OBJ_NAME = 'Z2318S1B01'.
DOC_CHNG-OBJ_DESCR = EMSUBJ. "Given in Selection screen
* Creating the body of email
REFRESH OBJTXT.
OBJTXT = 'your report'.
APPEND OBJTXT.
*-- Document size
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
*-- Populate packing list for body text
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
CLEAR OBJPACK.
*-----Attachment details
*-- Final Data to send to EMail
LOOP AT IT_ATTACHMENT.
OBJBIN-LINE = IT_ATTACHMENT-EMAIL.
APPEND OBJBIN.
CLEAR OBJBIN.
ENDLOOP.
*-- Get total no.of lines of Object table(attachment)
CLEAR : TAB_LINES.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
*-- Populate object header(attachment name)
OBJHEAD = EMATTACH.
APPEND OBJHEAD.
CLEAR OBJHEAD.
*-- Packing list for attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES .
OBJPACK-DOC_TYPE = 'TXT'.
OBJPACK-OBJ_NAME = 'Z2318S1B01'.
OBJPACK-OBJ_DESCR = EMSUBJ.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
CLEAR OBJPACK.
*-- Populate Mail Id's
LOOP AT EMAILID.
RECLIST-RECEIVER = EMAILID-LOW.
APPEND RECLIST.
ENDLOOP.
RECLIST-REC_TYPE = 'U'.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = DOC_CHNG
PUT_IN_OUTBOX = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
TABLES
PACKING_LIST = OBJPACK
OBJECT_HEADER = OBJHEAD
CONTENTS_BIN = OBJBIN
CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
RECEIVERS = RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Thanks
Vikranth Khimavath
Message was edited by:
Khimavath Vikranth
Message was edited by:
Khimavath VikranthHi Vikranth,
Check the below mentioned code. In this code replace the code of converting attachment(PDF) with Text. & pass the table contents_hex in function module fro sending email.
REPORT z_test.
DATA: x_ctrl_p TYPE ssfctrlop,
x_output_data TYPE ssfcrescl.
DATA: it_docs LIKE docs OCCURS 0 WITH HEADER LINE,
it_lines LIKE tline OCCURS 0 WITH HEADER LINE,
it_packing LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
*-----Initialisation
x_ctrl_p-no_dialog = 'X'.
x_ctrl_p-getotf = 'X'.
x_ctrl_p-langu = sy-langu.
Internal Tables Declaration *
DATA: it_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_pcklist LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
it_mess LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
it_table LIKE solix OCCURS 0 WITH HEADER LINE.
DATA: it_soli LIKE soli OCCURS 0 WITH HEADER LINE.
*-----Work area declaration
DATA: wa_doc_data TYPE sodocchgi1.
Variable Declaration *
DATA: v_lines_txt TYPE i,
v_lines_bin TYPE i,
v_lines TYPE i,
v_fname TYPE rs38l_fnam,
v_size TYPE i,
v_filename TYPE rlgrap-filename.
Start of selection event *
START-OF-SELECTION.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = 'Z_SMTF_TEST'
IMPORTING
fm_name = v_fname.
CALL FUNCTION v_fname
EXPORTING
control_parameters = x_ctrl_p
IMPORTING
job_output_info = x_output_data.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 134
IMPORTING
bin_filesize = v_size
TABLES
otf = x_output_data-otfdata
lines = it_lines
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
CALL FUNCTION 'SX_TABLE_LINE_WIDTH_CHANGE'
EXPORTING
line_width_dst = 255
TABLES
content_in = it_lines
content_out = it_soli
EXCEPTIONS
err_line_width_src_too_long = 1
err_line_width_dst_too_long = 2
err_conv_failed = 3
OTHERS = 4.
CALL FUNCTION 'ZFUNC_CONVERT_DATA_ODC01'
EXPORTING
iv_byte_mode = 'X'
TABLES
it_data = it_lines
et_data = it_table.
*-----To caluculate total number of lines of internal table
DESCRIBE TABLE it_table LINES v_lines.
*-----Function module to download the output file.
CALL FUNCTION 'DOWNLOAD'
EXPORTING
bin_filesize = v_size
filename = ' '
filetype = 'BIN'
IMPORTING
act_filename = v_filename
TABLES
data_tab = it_lines.
*-----Create Message Body and Title and Description
it_mess =
'i have successfully converted smartform from otf format to pdf' .
" and i have attached that in mail'.
APPEND it_mess.
wa_doc_data-obj_name = 'smartform'.
wa_doc_data-expiry_dat = sy-datum + 10.
wa_doc_data-obj_descr = 'smartform'.
wa_doc_data-sensitivty = 'F'.
wa_doc_data-doc_size = v_lines * 255.
APPEND it_pcklist.
*-----PDF Attachment
it_pcklist-transf_bin = 'X'.
it_pcklist-head_start = 1.
it_pcklist-head_num = 0.
it_pcklist-body_start = 1.
it_pcklist-doc_size = v_lines_bin * 255 .
it_pcklist-body_num = v_lines.
it_pcklist-doc_type = 'PDF'.
it_pcklist-obj_name = 'smartform'.
it_pcklist-obj_descr = 'smart_desc'.
it_pcklist-obj_langu = 'E'.
it_pcklist-doc_size = v_lines * 255.
APPEND it_pcklist.
*-----Giving the receiver email-id
CLEAR it_receivers.
it_receivers-receiver = '[email protected]'.
it_receivers-rec_type = 'U'.
APPEND it_receivers.
CLEAR it_receivers.
it_receivers-receiver = '[email protected]'.
it_receivers-rec_type = 'U'.
APPEND it_receivers.
*-----Calling the function module to sending email
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_data
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = it_pcklist
contents_txt = it_mess
contents_hex = it_table
receivers = it_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
WITH rfcgroup = 'iwdf7ytc_YD3_94'
AND RETURN.
REFRESH: it_receivers,
it_mess,
it_pcklist.
ENDIF.
Ashven -
When I attach a .MOV to my email it's coming up in duplicate and very small. This hasn't always been the case. I've sent many .MOV through email with no problem till now. Any help would be appreciated.
I believe you posted in the wrong forum. The iPhone can not attach MOV files to emails.
-
Attach movie - broken buttons - targeting
Let's say i have a simple movie clip called "navBar" and in
that movie clip I have nested another movie clip called
"green_btn". I have assigned linkage to both clips the first as
"navBar" and the second "green_btn". It is removed from the stage
and saved in the library with proper linkage.
Now let's say I return to the stage and create a "holder" for
my attached movie. I leave it blank, I call it "myHolder_mc" and
assign it linkageand give it a instance name of "myHolder_mc" and
move the cross hairs to the upper right hand corner.
Then I create a red button movie clip on the stage of a red
circle called "red_btn", and give it a instance name of "red_btn".
I will use red_btn.onRelease to load up the attachedMovie. When I
press the red_btn, the "navBar" movie attaches fine.
OK, thanks for sticking with me this far - HERE IS THE
PROBLEM - I want to be able to target the "green_btn" that is
located in the original navBar and assign it a onRelease function.
I can't seem to be able to target it, and have tried to find the
right target path, but can't seem to do it correctly.
So here is the code so far that isn't working
red_btn.onRelease = function(){
myHolder_mc.attachMovie("navBar","navBar", 0)
// the green_btn is nested inside of the navBar movieClip
myHolder_mc.navBar.green_btn.onRelease = function(){
trace("hello")
What should I do?If you are importing the swf into the library it will lose all its actionscript. You need to either copy that file from its original fla and create it as a movieclip in your other file (copy its timeline into a movieclip) or load that swf dynamically when the file is running using actionscript.
-
Attach movie (not using a button)
I'm trying to attach movie on frame 1 on timeline. I'm using
the following script and nothing happens:
myMovieClip.attachMovie("graphic", "g", 1);
g._x = 260;
g._y = 250;
When I use this script attached to a button it's working:
on (press) {
attachMovie("graphic", "g", 1);
g._x = 260;
g._y = 250;
any idea what can be wrong?>>myMovieClip.attachMovie("graphic", "g", 1);
This code assumes there is a movieclip with instance name
'myMovieClip' on level0.
>>do i have to give the movie clip an instant name
No.
>>i gave the name -graphic- in the linkage under
identifier
That's correct. -
Attach movie clips to scrollPane using attachMovie
Hi
I tried to attach movie clips to scrollPane using attachMovie
but could not do it
I tried the following code:
sp.contentPath="emptyMovieClip"
sp.content.attachMovie("boxesRow","boxesRow1",1)
trace(sp.content.boxesRow1)
Im able to trace the sp.content.boxesRow1 , but not seen in
the scrollPane
Can any one suggest me , how can I do this
Pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Thank you very muchhi,
The code is correct....
But, what i want to know is, are using the Identifier name of
the moviclips ???
"emptyMovieClip" should be an Ideintifier name for an empty
clip in the library.
and "boxesRow" should refer an identifier name of another
movie clip in the library...(its should also contain some object
for the visibility check)...
Maybe you are looking for
-
Does Endeca Integrator Loads Attribute with Null value?
I have a table in DB , with a column , lets say, supply_id. This is null for all rows. When i load data from this table using clover ETL graph and lets say source this data to another table , will my final table will have a column as supply_id? Or wi
-
How do I search for a SR in metalink
I went to metalink and clicked "service request" link. in the dropdown, I selected "SR number" and enter a number to search, I'm not able to get anything retured after searching. actully, no matter waht I entered, I was never be able to search anythi
-
How to convert dd/mm/yy in ddmmyy in java
Can any one tell ,how to convert dd/mm/yy in ddmmyy in java
-
Help installing fms on windows server 2008
Hello, I have FMS for developper 3.5.4. I have 2 computers: One called SVR with windows 2008 on it with iis7. One called PC with windows 7 which is my client. I would install FMS on the one called SVR beside IIS7. What I have done: I install FMS with
-
Composite Video on eMac problem
At my school I have a number of eMacs and I want to connect a few of them up to TV monitors. In the past I have been able to use the mini-vga to video adapter and connect it to the video input and have things work just fine. Recently, however, when I