P6 v8 web access and analytics reporting db.

Hello, I have web access working with desktop client P6 v8.
I installed the reporting db and created dev_bifoundation schema with rcu. The first run and incremental load is also working.
I installed BI Publisher.
I have configured the BI Publisher in P6 administrator.
I have BI weblogic running but I am not seeing any analytic or reporting menus in web access.
Any steps that I should re-check?
Thanks

To check the value is correct, append "?WSDL" to the URL. In your case the value will be valid if you can access BI Publisher web services as below
http://server:7001/bifoundation_domain/services/PublicReportService_v11?WSDL
If this is not true you will not see the BI Publisher web services
Hope this helps
Sachin

Similar Messages

Questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN Access

Hi there,
I want to ask a series of questions regarding Outlook Web App, Remote Desktop, Remote Web Access and VPN access and was hoping whether you could help me. Below are my questions to ask you.
Outlook Web App - What do I need to configure in order to get my Exchange account to work with the OWA app on my iPhone? Is Office 360 required on the server that hosts Outlook Web App in our organisation? When I configure the settings and
connect I get the following message "couldn't connect - We couldn't connect to the server. Check your information and make sure it's correct." I can connect with other devices using Outlook Web App.
Remote Desktop - What do I need to configure in order to connect to my computer at work using Remote Desktop on my Windows Phone? When I configure the settings and connect I get the following message "Connection error - We couldn't connect
to the remote PC. Make sure the PC is turned on and connected to the network, and that remote access is enabled. Inquiring minds may find this error code helpful: 0x204" I can connect with other devices using Remote Desktop. There are currently no
RD Server settings in the Remote Desktop app on the Windows Phone and the only way I'm to connect to my PC at work is via Remote Desktop and not to be confused with the one by Microsoft, however the app is on a trial basis and times out every 5 minutes and
can only be used once every hour unless I purchased the app for £2.99 off the App Store but would ideally like to use the Microsoft Remote Desktop app though.
Remote Web Access - What do I need to configure in order to get Remote Web Access on my Windows Phone using a URL? When I log in using a URL I get the following message "There is a problem with this Web page. Please contact the person who manages
the server" I can connect with other devices using Remote Web Access. Also how do you enable the background option for Remote Web Access? I know how to do this in Remote Desktop but not in Remote Web Access. Remote Web Access works on PCs regardless
being onsite and offsite and on my iPhone, the same issue also occurs with my Nokia 5230s regardless of whether I'm using Opera Mobile or Mini or the latest Nokia Browser.
VPN access - How do you configure VPN access on a Windows Phone using VPN? I cannot find the protocols PPTP, L2TP, SSTP and IPsec in order to configure VPN access on the Windows Phone apart from IKEv2.
Many thanks,
RocknRollTim

Any help would be much appreciated.
Kind regards,
RocknRollTim

Time, Web Access and Music Server

I have been tring to set up a music sever and be able to get my music and videos using web access will this device have that available?

Yes, no, and maybe:
1. Yes - Apple designed the Airport Extreme N base station to allow you to do that.
2. No - Apple does not currently support Time Machine backups to a hard drive cabled to an Airport Extreme N base station, mainly because it doesn't work reliably
3. Maybe - there are many reports from people who cannot reliably get any kind of file storage to work reliably via a network connection and the Airport Extreme N base station to its external hard drive. And others who seem to have no problems at all.
One would hope that all these problems will be solved straight away with the new Time Machine. But... we won't know until people actually start using them.

I cannot sync Ical on my iMac with my professional calendar (outlook web access). and I don't understand why it doesn't work since I have already made it with my iPhone. Help

Hello,
I bought an iMac few days ago. I would like to sync ical on my iMac with my professional calendar I use in my company (from outlook web access).
I was easy to manage it on my iPhone (I just add a new "exchange" mail account and ask for a calendar sync only) and it worked very quickly.
But I cannot do it with the iMac, and I don't undersatnd why?
the domain is is used for my iPhone is the following :
owa.companyname.com
I tried all the solutions I found in this forum but it doesn't work.
Many thanks in advancefor your help.
Matt

Does it have to be an applet?
If you want the same behaviour as in the code with traffic lights, change
class MortgageApplet extends JApplet implements ActionListener {
to
class MortgageApplet extends JFrame implements ActionListener {
and change
public void init() {
to
public MortgageApplet() {

Can GroupWise web access and Mobility service co-exixt?

Hi,
I have installed a test server with GroupWise 2014 and GMS 2.0.1. Everything seems fine - except from clients (iOS used for test) not being able to attach to the GMS.
The webserver shows web access correctly at /gw/webacc - but on the root I still get OES default front page.
From a different test server with GMS I get access forbidden when trying to access / from a client browser.
So:
- Is it supported to have both products on same server?
If yes:
. How/what can I change?

Originally Posted by clausbc
Hi,
I have installed a test server with GroupWise 2014 and GMS 2.0.1. Everything seems fine - except from clients (iOS used for test) not being able to attach to the GMS.
The webserver shows web access correctly at /gw/webacc - but on the root I still get OES default front page.
From a different test server with GMS I get access forbidden when trying to access / from a client browser.
So:
- Is it supported to have both products on same server?
If yes:
. How/what can I change?
GMS is only supported on SLES, so no you should not run GMS on a OES server.
https://www.novell.com/documentation...eq_server.html
Thomas

Web access and my iBook G4

Hello everyone
For the past several weeks I have had problems getting web access through a dialup connection on my iBook. The Mac can dialup and connect to the internet with no problems and has no issues with Mail accessing my IMAP and POP e-mail.
However, none of the three browsers I've tried (Safari, Opera and Firefox, all in their most recent iterations) seem able to access webpages. I can get RSS feed from Apple but webpages don't load. Web access was previously a fairly speedy and tolerable process. Some time ago I installed some plugins for Safari (PithHelmet and AfterSurf) which I did consider to be the offenders, but I removed these when I installed Safari 3. I've checked the ISP settings (Freewire.co.uk) several times, but this doesn't seem to make a difference. I've been using this ISP for about a year with no problems until recently.
The iBook has no problems with web access through a wireless network (ie in a wi-fi cafe). I read on another thread that someone was experiencing vaguely similar difficulties having installed updates for Quicktime. My Mac has these installed. I did try a web search for more info on this, but nothing relevant came up (or at least, I didn't spot it).
So, where to go from here? Apart from getting wireless broadband...
For reference, my iBook is a late 2004 model with an extra 512MB RAM installed and runs 10.4.10. Generally-speaking it's a fine little computer...apart from this.
With all good wishes
Gareth Wells

If you can send and receive mail in dialup, then your iBook builtin modem should be fine. It functions like a simple pipe, where e-mail and web pages are just different kinds of data that it cannot distinguish between. Ethernet and wireless would be two other simple pipes.
Port blocking is also unlikely because firewalls do not distinguish between the kinds of data pipes you might be using. So any problem you have with dialup would also show up on ethernet and wireless.
Elko is speculating that you might have DNS problems with your dialup ISP that may cause URL's to be misinterpreted. POP and IMAP mail access also involves URL's, however, unless you go to the trouble of entering only numeric IP addresses into your Mail preferences.
So, the answer is that we really have no answer. Under the circumstances, you probably should talk to your ISP. Try a limited free dialup account with someone like NetZero (or the equivalent on your side of the Pond) to see if that will solve the problem. Of course, if you are looking for an excuse to move up to broadband....

After I right-clicked on an unwanted email in Microsoft Web Access and put a filter on it all my emails and the menus disappeared. I can re-access in IE but how do I restore what I have foolishly done in Firefox?

I was working through my emails in Microsoft Web Access when I came across an email from a sender who keeps spamming me. I right-clicked on this unwanted email, saw a filter option and (recklessly) chose it. ALL my emails and the menus disappeared. I can re-access my emails in MWA in IE but how do I restore what I have foolishly messed up in Firefox? When I get to my email page in MWA in Firefox I now see nothing but the movable vertical bar.

You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.

Problems with Microsoft Office Outlook Web Access and any web browser

My university e-mail goes through Microsoft Office Outlook and I access it through the Web Access.
I have tried with 3 browsers (Chromium, Firefox and Gnome's Web, and with all of them I am getting the same problems.
Basically, once I log in, the css seems to be screwed sometimes (not always). I click in a e-mail to read it, and it does nothing (not always), I write an e-mail, click send, and it gives me a white screen error (not always), and then it is not even saved as draft.
I have this errors like 70% of the time, or more, which means that every time I want just to read an e-mail, I spend 5 minutes reloading the website, singing out, clearing cookies,... until eventually all seems to load correctly.
No idea how I can fix this, or how I can get this to work.
thank you!

The light version is set by default, and I cannot choose the non-light.
I assume it makes some kind of "webbrower check id", and mine sends whatever linux like id, which the server doesn't recognize, and it screwes me

Windows 2008 Web Server and Crystal Reports Runtime 10 comptability

We have migrated a website that was previoulsy on a Wndows 2003 server using IIS6 and Crystal Reports Runtime v 10 on ASP.NET 2.0
After migrating the website, and installing the Crytal Reports runtime, we are getting application errors related to Crystal Reports Runtime in event viewer and the browser.
For one is Crystal Reports Runtime v10 compatible with Windows 2008 Server, IIS 7 ?

No it is not. You're looking for about a 5 year forward compatibility. At this time, only CR 2008 (12.x) and Crystal Reports Basic for Visual Studio 2008 (10.5) are supported on WIN 2008. See [this|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=56787567] blog for more details.
Ludek

RESTFUL Web Services and Classic Reports....

NEVERMIND...... Setting in our instance was NOT enabled...
Thank you,
Tony Miller
Ruckersville, VA

ayberkcansever wrote:
Hi guys,
I will have an application which will have a service serving about to 30 million users/day and a mean of 5 requests/user.
It means that there will be about 150 million requests per day. I will have two servers behind a load balancer and my clients will be both Java and C++.
I think to implement RESTFUL Web Services but afraid of performance issues.
Did you have a knowledge about the performances of web service and socket programming in such a high loaded project?It depends on the CPUs, RAM, disks, and network configurations of those servers.
It depends on how the requests are distributed throughout the day.
It depends on how big the requests are and how big the responses are.

Security settings for web analysis and finacial reporting

Hi
Would anyone be able to let me know when I am creating a group/user within Shared Services what provisioning I need to set up so that the user can create there own reports using finacial reports and web analysis.
Also If a user is to just refresh reports but cannot change them what access do they need?
Thanks

Hi,
Have a read here :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security_11111/apas04.html
It should have all the information you are after.
Cheers
John
http://john-goodwin.blogspot.com/

I need to Health check for Web server and need report on daily basis

Hello,
How to monitor Web servers ?
It would be great for administrators to have a daily alert using power shell script for web server
Can anyone have any scripts that triggers email like IIS services , etc.. are up and running.
Thanks
Pushparaj
Thanks, Pushparaj

Hi Pushparaj, this forum is not for sharing or building script based on request
You check the below code and build your script
$Service = Get-WmiObject -Class Win32_Service -ComputerName SERVERNAME | ?{$_.Name -eq 'IISADMIN'}
Send-MailMessage -From 'mailID' -To 'mailID' -SmtpServer 'XXXX.DOMAIN.XXX' -Body $Service.State `
-Subject 'IIS Service'
Search Script
Request Script
See this script and modify as per your needs
Regards Chen V [MCTS SharePoint 2010]

Web Access and Web Services

What are the different between p6 WebAccess and Web Services?

I think I realise what the problem is....
It's because the Nokia (and Opera) are *proxy* browsers, meaning that they don't use the router to make the internet calls to pages, but they let another service do the work (presumably Nokia). The penny dropped after reading another thread where content was restricted by the router, but the mobile phone was able to connect to restricted sites - and I tried that scenario out too!
This also means that this remote proxy service can not see anything on your own LAN - obviously!
This is good for viewing internet sites via your mobile provider as they compress the data, meaning less data returns to you - but I don't see why this is necessary when using Wifi.
I've tried installing other browsers too - and they seem to be the same.
I'm rather disappointed by this.

Report writing for Web Access

Is there any good guides that people know of for writing reports in P6 v6.1?
I'm trying to integrate them into the P6 Web Access and not having much joy, but a bit better knowledge of how to build them originally might just help too.
MTIA
David

Why 6.1 ? why not use the new version that uses BI publisher for reports, not only is it more powerful, there are 3rd party books available about it.
http://en.wikipedia.org/wiki/Oracle_BI_Publisher

RD Gateway and RD Web Access - better together or on different servers?

I am evaluating Remote Desktop Services with 2012 R2 and initially I had all the roles on 1 server for testing. I began thinking it would be a better setup to split the RD Gateway role and the RD Webaccess role into different servers for security purposes.
This way I could expose only the RD Gateway to the internet and the Web Access role would not be exposed. In all my reading and searching it seems that nearly every article I come upon has both RD Gateway and Web Access installed on the same system.
What is the ideal setup from a security standpoint to have the these two roles separate or does it not mater? If it does not mater then I will setup 1 server with Gateway and Web Access and I will then have other servers for licensing, broker, session
host, and visualization host once I move this into production.
If these roles are on the same system how do I know if the gateway role is doing anything? Is the FQDN\rdweb the correct URL to use even when the gateway is implemented?
If they are separate how do I tell the gateway and web access servers to use each other?

Hi,
As far as I know, it’s fine to have RD Gateway and RD Web Access roles installed on the same server.
“Normally external users would log on to RD Web Access via tcp port 443, click on a RemoteApp and connect to RD Gateway via
tcp 443/udp 3391, RDG connects them to RDCB on tcp 3389 which redirects them to a RDSH server, finally the RDG connects to the RDSH on tcp 3389/udp 3389.”
Quoted from TP in this post below:
RD Gateway and RD web issue
https://social.technet.microsoft.com/Forums/windowsserver/en-US/5ab40559-23f7-4ebc-b60d-87375cc55674/rd-gateway-and-rd-web-issue?forum=winserverTS
More links below for you:
RD Gateway deployment in a perimeter network & Firewall rules
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
Remote Desktop Gateway/Web Server Placement
https://social.technet.microsoft.com/forums/windowsserver/en-US/b2970cf5-a5b5-494c-88b7-cd6e01f84bb6/remote-desktop-gatewayweb-server-placement
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

P6 v8 web access and analytics reporting db.

Similar Messages

Maybe you are looking for