P6320f after 10 minutes of use, screen pixelates, then turns gray and system no longer comunicates

Not sure if this is a heat issue, power failure or motherboard problem. Sometimes it powers down completely, but most of the time the power supply is still on but the monitor no longer recognizes that the computer is on and the monitor is in power save mode. I installed a new video card hoping that would fix the problem but it continues with the new video card.

Gumbyseabass, welcome to the forum.
Due to the age of the computer, I suspect a failing power supply unit (PSU). Here is a guide to help you troubleshoot the problem. A failing PSU can cause symptoms that are seemingly not related to the PSU.
Also, check to assure all of the components are seated properly; especially, the memory.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

After search screen turns gray and can no longer search anything?

After initial search screen on i pad goes gray and can no longer search anyhting. What did i do/

Using Spotlight on the iPad or are you talking about Safari?
If Spotlight, restart the iPad.
If Safari...
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

IPhone 4 screen flickering then turning off and when i try to turn it back on it either works or I get a white or purple screen. When i turn it off it doesn't turn back one

Ok so this started around a week ago. I got home one afternoon put my phone down went back to it and pressed the home button and it seemed that it turned itself off so I tried turning back on, didn't work so I hooked it up to my laptop tried turning it on again it came on but I got a WHITE screen. So after that I decided to leave it for a bit I went to it after it started working fine...until 4 days later. I was on instagram and all of a sudden the screen starts flickering like crazy and then it turned itself off, I did what i did last time and just left it for a bit it came back on working fine. And then about 2 days ago I was listening to music and the screen froze then started flickering (getting quite annoyed at this stage) and then turned off, this time I tried turning it back on straight away only this time it worked. And that brings us to this morning, i was on facebook and about 5 minutes later it starts flickering and freezing once again and then turned itself off. So i hooked it up to my laptop I then got it to turn on for like 6 seconds then the screen started to dim and turned off. That brings us up to now about 10 minutes ago i tried turning it on, it turned on but I got a PURPLE screen and it just stayed like that until i turned it off. Does anybody have any idea what is going on? I think its the screen itself but i'm probably wrong. All help is appreciated.

I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times.

My ipod screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

screen went white, then turned blank and will not respond to the buttons i touch. it is also able to open up now somehow, so i can see the inside

Let the battery fully drain. After charging for at least an hour try:
iOS: Not responding or does not turn on
If not successful time for an appointment at the Genius Bar of an Apple store.

HT4904 I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.

Screen dims then turns off

Specs
Hp Touchsmart PC 610-1030y
Product Number: BZ662AA#ABA
Windows 7 Home Premium 64-bit
Intel(R) Core(TM) i3 CPU 550 @3.20GHZ
4 GB SDRAM
Intel(R) HD Graphics
My screen dims then turns off (sorry my camera is not that good )
Works normally from here ^
then it turns like this (with BEEEEEP noise)
^ Like that my screen is bright on one part of the screen and the other part is dark. It also makes this beeeeeeep noise. after this, screen turns black.
My computer is ON and running though. It's just the monitor that goes off.
Any way to see what is making this problem?
Thanks. By the way, I've already done the manufacture reset. It's obviously a hardware issue.
I'm so dissapointed with HP products.
It's been 2 1/2 years since I bought this computer and it failed TWICE already.
One time Hard drive failed, now my monitor goes black like this. -_-

Hi sdw8253:
Thank you for your inquiry.
I am sending you a link to "Monitor / Video / Graphics" click here.
Please refer to the sub topic "Display Is Crisp When the Desktop Loads but Blurs After a Few Seconds"
You may want to consider testing for hardware failures. (windows 7) click here.
Please let me know the results.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

When I type in my password into the login screen I get the rainbow pinwheel and then the screen turns gray and goes back to account selection... How do I access my account?

Today I was doing my chemistry homework when all of a sudden my mid 2011 MacBook pro running Lion 10.7.4 started going very very VERY slowly to a point where it was unusable. I restarted my computer and went to type in my password. When I did this, the computer recognized the password and began to boot yet the pinwheel came on and the screen turned gray and went back to the account selection screen. It continues to do this everytime I enter my password and I can no longer access my account. How do I fix this.

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on

My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.

Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808

I usually use PP at work. can i use keynote to modify PP, then turn around and utilize Keynote new file in PP

can i use keynote to modify PP, then turn around and utilize Keynote new file in PP?

*Apple's stated System Requirements:*
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (500MHz or faster) processor
512MB of RAM; 1GB recommended
Approximately 1.2GB of available disk space
32MB of video memory
Mac OS X v10.4.11 or Mac OS X 10.5.6 or later
QuickTime 7.5.5 or later
The NVIDIA GeForce4 MX has a stated max 64mb of memory, but I could not see whether that meant it actually had that quantity. I would assume though that it had a minimum of 32mb.
Have you checked in *About This Mac* what the actual memory is?
Maybe Apple was optimistic in its minimum requirements.

After updating my iPad to ios 7.1 my folders turned gray and the bar at the bottom of the screen is the same gray instead of taking on the color of the background. Is there a way to change this?

After updating my iPad to ios 7.1 my folders turned gray and the bar at the bottom of the screen is the same gray instead of taking on the color of the background. Is there a way to change this?

Turn off the Reduce Transparency setting.

Why does my macbook pro 13'' mid 2010 screen turns gray and freezes while connected to external monitor?

Every once in a while my macbook pro just randomly instantaneously freezes and the screen turns gray and it has only done it while connected to a high res 22'' Dell external monitor (so far). Usually when this happens I'm listening to music and I noticed my music continues to play but the keyboard is totally unresponsive forcing me to manually press the start button until the computer force shut's down. Luckily I havnt lost anything yet but I hate having to restart my macbook pro that way...just want to know if its a glitch in the software or if I have a more serious hardware problem. This problem has occured maybe 4 times since I got my macbook last summer 2010 so its not too bad, im just worried cause these computers aint cheap.

Duquan,
Macs can be picky about the RAM which they use; the “Your computer restarted because of a problem” message typically indicates a RAM problem. Since you have a Mid 2009 model, it should have 1066 MHz RAM installed rather than 1333 MHz RAM. If your RAM was mislabeled, then that might cast some doubt upon the quality control which that RAM manufacturer uses. My suggestion would be to purchase 1066 MHz RAM from a reputable manufacturer.

How to use a slider to turn on and off lights

Hi guys. i am fairly familiar with Labview now but cant seen to get my head around this problem. i have a slider which is numbered from 1 to 10. below the slider i inserted 10 LED lights. my aim sis to use the slider to turn on and off the lights. for an exmaple, when i set the slider to one, the light on the far left should go on. when i set the slider to 2, the first light should go on and the second light next to it should go on, and the pattern continues. i thought of using the number to array boolean but it didnt seem to do the trick. could you please help me out. i have attached the basic layout of how i wanted the objects to be arranged
kind regards
joe
Solved!
Go to Solution.
Attachments:
led control.vi ‏7 KB

wow! simplicity at its best! thats really straight forward to understand. i think you are right about making complicated circuits. the reason why i had asked to know how to do this was because i wanted to learn how to control motor directions using a slider. so after i thought i had got the easiest way of giving out 2 different outputs using a slider, i replaced the lights with switches that changed the direction of the motor. i successfully did this for the first motor and it rotated fairly well, but wanted to control 4 in total. so i simply copied and pasted the code and re-asigned the switches to different motors. when i did this, the results did work BUT the motors went very very slow. the movement was not steady and kept skipping. i think this its due to the coding being overly complicated thefore causing a serious lag. if you could please have a look
kind regards
joe
Attachments:
controling test.vi ‏29 KB

I recently added photoshop elements 12 to my computer but can't get past the initial log in screen. It goes gray and spins. any thoughts?

I recently added photoshop elements 12 to my computer but can't get past the initial log in screen. It goes gray and spins. I have a current serial number and log in ID/password but still not working. Any thoughts?

Hello,
I recommend you contact AT&T's dedicated BB Support staff (call their front line, request escalation to BB Support) and have them check to be sure that your account with them is correctly configured for this device. Sometimes when switching devices things don't fully automatically move behind the scenes, and only they (ATT) can validate that.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Very big icons on my screen. Have turned off and on. Cant get rid off. Cant downsize screen to enter my pin. Sems blocked or stalled. What to do?

Very big icons on my screen. Have turned off and on. Cant get rid off. Cant downsize screen to enter my pin. Sems blocked or stalled. What to do?

Double tap with THREE fingers to turn zoom off. Then go into Settings>General>Accessibility and turn zoom off for good.

My macbook screen won't turn on and it keeps beeping at me...help!

I tryed turning on my macbook pro 13'' and the screen won't turn on and it keeps beeping at me and flashing the white light on the front of the computer at the same time. any suggestions?

Beeping sounds usually indicate a RAM or logicboard problem.
If you have third party RAM recently installed, put the factory RAM back in.
Use the free MacTracker to find out your correct RAM spec and return the defective RAM for a exchange or buy top tier RAM from Crucial.com or OtherWorld Computing.
If you didn't mess with the RAM, take the machine to Apple for a free eval.
You might want to read this if the repair bill is not worth it.
My computer is not working, is my personal data lost?

P6320f after 10 minutes of use, screen pixelates, then turns gray and system no longer comunicates

Similar Messages

Maybe you are looking for