P67A-C45 (b3) bios fail - recovery

Hello guys i have problem.
I copy New bios in flash memory
After run bios file (.exe) and click agree and pc stuck.
I Will restart pc but not run bios. I must recovery bios. Help immediately pls thanks :(

Hi,
Try >>Clear CMOS Guide<<
If still doesn't work, then your BIOS is bricked and needs to be recovered with SPI programmer (Contact local IT services about this).

Similar Messages

Msi p67a c45 new bios?

My motherboard is unable to recognize the gtx 970, and I'm already using the latest bios 1.J. Will there ever be a new one?

because 1.J is maxed one for B2
Quote
The biggest problem is that this gpu was working fine until removed from the pci-e slot, next time it was inserted it just froze before post.
try clear cmos with power cord removed: >>Clear CMOS Guide<<
try different PCI slot
try the card in another system

Problem P67A-C45

i've had this motherboard for a month now but i've been away for a few weeks, and now the motherboard is 'dead'
I cant figgure out if it is the motherboard or the cpu that has crapped out
Tested:
- Powersupply - Working
- Graphicscard - Working
- RAM -> untested
- CPU -> untested
So i figgured that perhaps i should ask people with more experience.
When i boot i get 2 High Hz beeps and another that is slightly higher after that i get 5 deeper beeps
Is there a new Beep Error code for UEFI motherboards?
And is the motherboard completely dead?
Thx in advance
MSI P67A-C45 B3 (Bios version known)
Intel Core i5 2500 3.3GHz
Corsair 2x2gb 1600MHz CMX4GX3M2A1600C9
XFX Core Edition 550W 80+ Bronze
Gigabyte GTX 560Ti OC GV-N560OC-1GI
Western Digital 1Tb Black 7200RPM
Samsung SH-S223C 22X DL

any beeps normally is a good indication, shows that board is alive.
can we know what components you use? read >>Posting Guide<<
+ have you done >>Clear CMOS Guide<< with power cord removed?

MSI P67A-C45 (B3) high temp. issue

Hello ,this is my first post here.
Just upgraded from giga h61 to MSI P67A C45 (B3).Hwmonitor and aida64 shows temp1 as high as 110C while gaming,(I think other temps are fine:temp0 cpu:55C max. and temp2 system 40C max.)I never had this issue before with my old mobo,any ideas-solutions greatly welcomed.
My system:
i5 2500k
MSI P67A C45 (B3) bios 1.9
corsair 2*2gb 1333
sapphire 6850
samsung 1tb
Sunbeam core contact freezer
windows 7 32bit sp1

Quote
I don't know what "temp1" stands for though,might be vrm temp.or something else
To the best of my knowledge, it is the PCH (SB) temperature reading if using CPUID's H/W Monitor. Please review this thread; https://forum-en.msi.com/index.php?topic=148704.0

Intel SVID Mode Hang - Bios 1.8 - MSI-P67A-C45

Hi, this is a follow up on my previous question - Intel Sandy Bridge i5 2400 Vcore Range - https://forum-en.msi.com/index.php?topic=145829.0
"Hi, want to check with you guys what is your i5 2400 Vcore range ? (As reported by CPUZ 1.56)
Mine keep stagnant at 1.19-1.21v between idle and load. I just know that idle vcore should be around 0.9v.
Is this normal ? My CPU frequency did downclock to 1600Mhz (100Mhz x 16) but vcore remained 1.19v.
My setting are :
Mobo - MSI P67A-C45 (Bios version 1.7)
GreenPowerMode - APS / Intel SVID (No effect)
CPU Setting - EIST enabled, CPU vcore auto, Spread spectrum on, Vdroop control high. CIE support on, Intel C state on, Power technology Custom/Energy efficient (No effect), Intel Turbo Disable
All other setting on auto
Despite any setting I tweak and even optimised default, the vcore remained 1.19v although clock downed to 1600mhz. Any idea ? TQ !"
After I update to the latest bios 1.8 and set the GreenPowerMode to Intel SVID mode, the vcore now dropped to 0.8-0.9v which is nice
However, it will hang after some time in the window desktop every time. Meanwhile, if i set the GreenPowerMode to APS mode it was stable
But vcore remained at around 1.16v as above situation. Anybody experience hang on Intel SVID mode ?
Win a Leadtek GTX 570 from the following website - http://www.leadtek.com/event/au/

You may want to consider giving the latest BETA UEFI Release as try:
https://forum-en.msi.com/index.php?topic=145403.msg1090271#msg1090271
The changelog mentions "Fix APS Mode fail when use 2600K CPU". Perhaps that will have an effect on your system as well. If not, contact MSI Technical Support about this issue: http://support.msi.com/

Virtualization BIOS Setting in P67A-C45

Hi,
I bought the P67A-C45 motherboard with an Intel I5 2500K CPU, I running Fedora x86_64 with VMWARE Workstation. When I want to install other guest 64bit OS on the vmware, it said that I have a VT capable but VT disable. In the vmware forum it stated that I have to change the setting to enable the virtualization in the BIOS, but I cannot find any setting to enable virtualization in the motherboard BIOS. Anybody can help me?
Rgds
Lanang

Read here, might do the trick for you too:
https://forum-en.msi.com/index.php?topic=145417.0

Best BIOS settings for P67A-C45

Hello,
I have a P67A-C45 motherboard with an Intel [email protected] processor and 4 MB DDR3 1600 MHz.
Could you please tell me the best settings in the bios for this configuration?
What is the difference between the intel SVID or APS GreenPowerMode?
Thanks.

Here is a thread that may provide you with some guidance. https://forum-en.msi.com/index.php?topic=147300.0

Help finding the Best BIOS settings for P67A-C45 (2)

Hello again folks
I Have a P67A-C45 board with an Intel i5 [email protected] and 8Ghz DDR3@1600 of memory
I just want to know what are the best setiings to my system. I'm planning to make an overclock, but i don't know much about these.
My ram are at 1333 MHz. What's the problem????

Quote
My ram are at 1333 MHz. What's the problem?
Your CPU only natively supports up to 1333mhz memory. Your memory sticks, although rated to run up to DDR3-1600 speed, are only natively DDR3-1333.
Hence, if you have not applied any overclocks, and are running at default settings, the BIOS is reading the default native SPD setting for your memory, which will be DDR3-1333 settings. So no, there is no problem really. In order to run your sticks at their rated setting, you will need to overclock.
But, you might want to have a read of this:
https://forum-en.msi.com/index.php?topic=147704.0
If you have more questions about overclocking, then please ask them in the correct area of this forum (the Overclockers area), after first reading the >>Posting Guide<<

P67A-C45 doesn't effectively change the vcore on bios

Well another bug found on the P67A-C45 bios 1.5
you can try to change the vcore, the bios says that it has changed, then you reboot, come back and the actual vcore still always on 1.208. You load windows, get to command centre and you get 1.2v
Really frustrating to encouter so many basic problems with this board...

Quote from: Mike on 23-January-11, 23:13:35
Good that 1.7 seems to resolve the issue.
it improved oc as well, some new features added to fine tune. 1.7 is way better than 1.5 for oc.

MSI P67A-C45 with 4x4Gb Corsair Vengeance = random freezes in bios

Ok here is the problem i hope you guys can help me with. I recently bought the following rig:
- MSI P67A-C45 Motherboard
- 4x4Gb Corsair Vengeance memory.
- MSI N560GTX-Ti Twin Frozr II/OC
- Core i7 2600K
I am having the following issues:
Whenever i put in all the memory, the PC won't boot, it hangs even in the BIOS (at random pages). Everything seems to run fine (except for a minor detail which i will mention later) with 12 Gb installed (3 dimms that is). I have tried changing the voltage to 1.65v but this doesn't change anything. With 12 Gb (or even only 4Gb) installed there is only one weird thing happening:
Whenever the pc wakes from hibernation i get the following error:
“Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Then after clicking resume it says i can't resume from the saved state and that it will be discarded (effectively doing a clean boot of the OS).
Can these two problems be related, and if so, is it a hardware problem or some BIOS settings i can try?
Any help would be greatly appreciated.

Quote from: Bernhard on 05-May-11, 13:51:46
1. Have you tested your mem sticks individually with memtest ? There is always a chance of a defective module.
2. Test the mem at 1333. Insert only 2, set it to 1333 manually in the BIOS, save and switch off. Add all modules and see if it boots.
3. You may also want to reseat your CPU, whilst it's out, check the CPU contact pads for indentations and see if there are any pins on the socket that are bent.
1. I have tested with 1 mem stick, then with 2, then 3 and then 4 (memtest from bios seems to be the only thing not crashing with 4 mem sticks). So i have not tested everything individually, but in my opinion this should be thorough enough.
2. I have done this exact thing but then with 3 mem sticks, only adding the last one when switched off, then turning it back on again. I will try with the two so in dual channel, this might make a bit of a difference.
3. I have reseated the CPU once, it is not a fun thing with the Big Shuriken cooler i have , i'll try this as a last resort.

HP Pavilion DV6-3340et bios failed, bios recovery or restore

HP Pavilion DV6-3340et bios failed. My screen is always black. Computer doesnt start. How can I recover my bios from usb?
Do you have bios rom files for usb?
Can you tell me, How to recover bios, which method and files? xxx.fd, xxx.bin, xxx.rom, xxx.sig etc.
Please help me. Now from thanks.

HP document on restoring the BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&tmp_task=solveCategory&cc=us&dlc=en&lc...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

P67a-C45 powers on for a few seconds then turns off

got a core i7 2600 with this board, my problem is when i power on, the 4 blue leds on the mobo turns on, cpu fan spins up and 5 seconds later it goes off again and then turns on again and keeps repeating - no beep codes - mounted the mobo on a board to minimize potential shorting but same problem - switched power supplies and still the same - any ideas
P67A-C45 - (cant get to bios to see)
i7-2600K
Corsair 4x4GB DDr3 1333
Maxtor 1TB
Intel x25M SSD 80GB
OS Will be win 7 64b
ATI brand Radion HD 5650
power supply Corsair 600W

Always best for initial first time startup, to do it with just one RAM stick in the primary blue dimm slot. A couple thoughts, first is use just the one RAM stick & load the OS & all the drivers, then add the other sticks. The other thought is to try each RAM stick individually in the primary slot to rule out a bad or failing stick.
Quote
I notice my graphics card is very hot
That can't be a good thing.

P67A-C45 problems - startup, closure freez; no clear reason

Hello
I would like to ask you for help with identifying problem which most certainly concerns my motherboard, until proven not guilty
What is the problem: since about 1 month I was facing a problem with system startup - it usually hung up after typing in password on logon screen. It would freez randomly on "Welcome!" screen or desktop loading only black screen and cursor with no response to keyboard keys. System loaded in safemode with no problem. Sometimes, also randomly, it would also start up in normal mode after few hard restarts or restart from safe mode. After some community forums research the first suspect was the graphic card. Reinstalling the drivers, some test and a little chat with tech service however made me thinking it is the wrong direction. Gigabyte TS [they are my GPU makers] pointed at motherboard as a very probable cause if there is everything right with system and software.
Despite failing to find the reason form software side I have backed up my data, zeroed the HDD and repartitioned it [with Pared Magic], than installed system again [Win 7 HP - full PC specification at the end of the post]. I have also performed RAM tests with Memtest which came up positive - no errors after 10 cycles. Also checked HDD itself with Saget tool if there is something wrong with it - everything came up to be in order.
After the system re-installation [without any updates and programs] everything loaded well however I had another mystery - while waiting for reboot the system hang up on closure! Keyboard went off-line [lights turned down] and on the screen I just saw freezed "Shutting down..." . After hard restart system loaded correctly. I've installed updates via MSI Live Update 5, all necessary drivers and programs and rebooted the system. Freezed at shutting down again and another curious thing - after hard restart i saw a black screen with a "9C" code at the bottom right corner of my screen [everything lunched usually after "A3" code appeared there]. Few hard restarts - the same. Consternation. Hard shutdown. After few minutes I've hit the power button again and it magically started. I am very fascinated with this problem and I would like one more time ask you for your ideas on this issue. I am not too hasty to hand my pc for service as I don't swim in money so if i can resolve it at home with your help I would be delighted to do so
My PC hardware spec: [some names are translated by me form Polish so I apologize if there is something translated too directly if you know what I mean ]. Feel free to ask for any additional information. Thank you in advance for any given feedback! [and sorry for any critical language errors]
OS: Windows 7 Home Premium 64bit [latest updates, critical and optional by the time 13.02.2013 installed]
CPU:     Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Motherboard: MSI P67A-C45 (MS-7673)
BIOS:     BIOS Date: 08/01/12 15:53:14 Ver: 04.06.04
GPU:     NVIDIA GeForce GTX 470
RAM:     8,00 GB
Default printer: Lexmark 5400 Series
Advanced CPU info:
Physical CPU:   1
Logic CPU:   4
Name:    Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
Decs:   Intel64 Family 6 Model 42 Stepping 7
Manufacturer:   GenuineIntel
Frequency:   3292 MHz
Frequency of external clock:   100 MHz
CPU ID:   BFEBFBFF - 000206A7
Advanced BIOS info:
Name:   BIOS Date: 08/01/12 15:53:14 Ver: 04.06.04
Manufacturer:   American Megatrends Inc.
Version:   V1.19
Copyright:   ALASKA - 1072009
Date:   2012-08-01
Size:   8 192 KB
Advanced GPU info:
GPU name:   GeForce GTX 470
Chipsate name:   NVIDIA GeForce GTX 470
Video memory:   1 280,00 MB
Legality[?]:   NVIDIA
DAC type:   Integrated RAMDAC
Architecture:   VGA
Current resolution:   1024 x 768
Current color set:   32 bites
Refresh rate:   60 Hz
BIOS name:   Version 70.0.35.0.4
BIOS version:   Version 70.00.35.00.04
BIOS date:   10/18/10
Pixel Shader:   3.0
Vertex Shader:   3.0
WDDM: Yes
Installed drivers:   nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver date:   2012-12-29
Driver version:   9.18.13.1090
Name of INF file:   oem13.inf
Section of INF file: Section022

Quote from: flobelix on 14-February-13, 01:42:13
You could also say: "oh yes, of course I'm mixing ram. In fact I mixed two dual channel kits. I have no idea if that works as I'm stressing the dual channel controller to the max with four sticks and do not even use a matched kit"
Sorry but Goodram does not make memory for Corsair, Patriot or Kingston. It amybe is a local ram maker but surely no manufaturer of high quality sticks.
Well as mentioned in the first post I am not a professional and I can be mistaken however as I said later depending on info from diagnostic tools and fact that the issue occured long after RAM installation and fact that stick removal has no diagnostic value as pc is able to randomly start up and shut down properly I still ask for other probable solution.
Moreover flobelix you need to understand that GoodRAM is a label of certified, biggest producer in middle and eastern Europe and a strategic partner of Toshiba and Samsung. If you are such a label orientated person that you consider. f.e. Corsair Kingstone or Patriot as only high quality producers (and they makeing their sticks in China or India ) just becouse the label than I would kindly ask you to abandon this thread becouse I have no goal in haveing an argument about ram producers and it gives no usefull feedback consideing probelm I have asked to help me deal with. Best wishes though and no offence .

STOP 0x0000007B Blue Screen Error after updating drivers for my P67A-C45

Hi!
I recently updated the drivers for my mainboard MSI P67A-C45. I did this with the update utility that follows this product. I choose the "update all" function so I'm not really sure what was actually updated but I remember seeing the bios and my realtek network drivers in the list of stuff being updated. Anyway, during (what I think was) the update of my BIOS (a CMD window appeared and started executing tasks) my computer suddenly restarts. I wasn't really paying attention during this process but it seemed like it wasn't finished and that the restart was unintentional.
Now during boot I get a Blue Screen message at the "Starting Windows" logo. The Blue Screen flashes by and my computer restarts instantly. It's a STOP 0x0000007B message which probably has to do with the drivers I just tried to update.
I have Windows 7 64-bit and I have tried the startup repair and the system restore function without any success.
Any ideas?
Can I revert these updates or maybe install the original drivers without formatting my hdd? I have the original CD that came with the board.
Best Regards
Victor

AHCI is a mode setting for the SATA controllers. You will find it in Integrated Peripherals. If you haven't set it to AHCI, it normally defaults to IDE mode. X79 platform being the exception. Yes. Remove LU5 & download & install all driver updates & such manually.
If your UEFI/BIOS did get flashed by LU5, I would recommend to remove the power cord from the PSU, remove the battery for awhile, clear CMOS, reset all the settings, especially check in the OC Section, CPU Features. Check to make sure there are no '0's showing. I don't know what your CPU is, so I don't know what to tell you to set the Core Ratio limit for each core if they are in fact sitting on 0. Disable Spread Spectrum & EuP 2013.

How to trigger the BIOS CRISIS Recovery mode for Thinkpad T61.

For any other laptop, there's a possibility to run a BIOS crisis recovery, by holding Win-B or Fn-B and a few other conditions, one can make the laptop to boot up from a USB floppy drive and restore BIOS even if it's not working. But it seems that it doesn't work for ThinkPads, or I don't know to trigger the mode.
Thank you in advance.

Your post was very helpful. It did the trick. The photos of the screens and etc. helped.
I am using a Toshiba laptop that came with Winddows 8.1 (64bit), which allegedly supports UEFI boot.
Initially, the boot failed and after trying different settings I recalled a statement that not all USBs work the same and results may vary. I tried another USB and your selections worke perfect.
I did not revert the BIOS settings and the machine boots properly to the normal login.
My need for a bootable USB is to boot the laptop if the hard drive fails. This allows to either re-image it or replace the hard drive and for re-image it. The key is the bootable media.
Thanks for your effort..!
MarkinID
PS - I've clicked the Kudos button

P67A-C45 (b3) bios fail - recovery

Similar Messages

Maybe you are looking for