P67a-C45 powers on for a few seconds then turns off

got a core i7 2600 with this board, my problem is when i power on, the 4 blue leds on the mobo turns on, cpu fan spins up and 5 seconds later it goes off again and then turns on again and keeps repeating - no beep codes - mounted the mobo on a board to minimize potential shorting but same problem - switched power supplies and still the same - any ideas
P67A-C45  - (cant get to bios to see)
i7-2600K
Corsair 4x4GB DDr3 1333
Maxtor 1TB
Intel x25M SSD 80GB
OS Will be win 7 64b
ATI brand Radion HD 5650
power supply Corsair 600W

Always best for initial first time startup, to do it with just one RAM stick in the primary blue dimm slot. A couple thoughts, first is use just the one RAM stick & load the OS & all the drivers, then add the other sticks. The other thought is to try each RAM stick individually in the primary slot to rule out a bad or failing stick.
Quote
I notice my graphics card is very hot
That can't be a good thing.

Similar Messages

  • When I try powering up my phone it stays on the logo screen for a few seconds then turn off, whats wrong with it?

    When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • I apple comes up for a few seconds then turns off. please help

          i did a complete reset on my 1st gen ipod touch and now it wont turn on or charge!!! the little white apple comes onfor a few seconds then shuts off again.please somebody help me fix it thatnk u

    Kazandjaz, Welcome to the fourm!  There is a 99.5% chance that your problem is caused by a failed internal power supply unit (PSU)!  If you have operated it for about 18 months or so, that is the cause.  Take it to your nearest Apple dealer and ask them to check it out.

  • My time capsule stopped working. amber light comes on for a few seconds then turns off.

    my time capsule stopped working. When I try to power it up the amber light comes on for about 10 seconds and then turns off. That's as far as it gets. Any ideas on how to solve this problem.

    Kazandjaz, Welcome to the fourm!  There is a 99.5% chance that your problem is caused by a failed internal power supply unit (PSU)!  If you have operated it for about 18 months or so, that is the cause.  Take it to your nearest Apple dealer and ask them to check it out.

  • Plug in my ipod classic stays on Charging please wait for a few seconds then turns off

    i plug it in on wall charger and computer and its says charging please wait for a couple of seconds and then the screen turns black dosent work for like a day the i plug it in after a day it does the same thing please help its a black ipod classic 120 gb

    Have you tried charging it with another known working USB sync cable?  After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
    B-rock

  • I cannot sync my iphone 4 to my imac it connects for a few seconds then goes off

    please can someone help me   When i connect my iphone 4 to my imac using bluetooth it pairs up but only lasts for a few seconds then goes off and shows
    not connected  i have tried all sorts of ways  but  without success  why is this happening am i the only one  does anyone know the answer please

    Seems like my problem - I have a new iPhone 4 and it does not want to pair with any device. It seems to connect, and is recognised by my MacBook pro, it shows the code that my Macbook shows, but then says it cannot connect. Neither did it connect to another imac, nor does it connect to my carphone. Have received a replacement (as I had bought the iPhone five days ago), have a new one now, but exactly the same problem. But I cannot alter the bluetooth settings on my iPhone, and restoring does nothing, nor leaving it in the completely unaltered setting, nor switching off all other wireless devices. Does anybody know how to solve this?
    Arnold

  • MOVED: Re: MSI Z68a-G45 (G3) Powers up for a few seconds then shuts down; repeats

    This splitted topic has been moved to Overclocking, Undervolting section.
    https://forum-en.msi.com/index.php?topic=160863.msg1179176#msg1179176

    Quote from: moxieman117 on 11-August-12, 08:22:42
    Hey guys, just picked up a Z68a-G45 (G3) and I'm currently running the following hardware on it:
    i5 3570k 3.4ghz at 95w (I have verified that the mobo is compatible with this chip) with stock cooler
    1 DIMM of 4gb Kingston HyperX ddr3 1600 ram
    OCZ ZT series 750 watt modular PSU
    I currently have the graphics card, SSD, HDD, and CD-ROM out for trouble shooting purposes.
    Currently, when I start her up it thinks for a second, powers up, fans spin, and then after a few seconds it dies and restarts.
    I went down to 1 DIMM, cleared CMOS, checked for bent pins, even tried a different PSU all with the same result. Is this likely due to the board?
    Thanks!
    Verified how exactly? Yes that CPU is compatible, but only when an Ivy UEFI/BIOS update has been performed.

  • My ipod will not charge. it only goes to the apple logo for a few minutes, then turns off.

       P  L  E  A  S  E
       H  ELP

    Did you try a hard reset? Hold the On button and the Home button until it powers down but continue to hold until it begins to power up again. See if that brings any success.

  • My MacBook Pro, even when connected to the power chord, will turn on for a few seconds then shut back off. Any ideas on what is wrong?

    I Am trying to turn on my MacBook Pro laptop, but when I do, it starts to turn on for a few seconds then shuts off again. It has around 80% charge and even if the power chord is connected it won't turn on. Need some help because I am out of the US right now and there are not a Mac store or anything that I could go to.

    HAve you tried using a different power chord? If the power chord is not the issue, it could be the power supply inside your mac.

  • Installed runs for 10 seconds then turns off continues doin it

    i installed firefox 4 it runs for about 10 seconds then turns off i re apply the programe thing runs a short while then turns off i have re installed from different sites several times still no joy

    Which PowerMac is experiencing the issue ? (It's a powermac forum)
    Which Mac OS ?
    and which AirPort software version ? (use Get Info on AirPort Utility)
    Which encryption method are you using on the Mac ? (it's been known to get it wrong)
    ie. WEP 40-bit, WEP 128-bit, WPA, WPA2, WPA2 Personal (open Network Prefs, select AirPort and click Advanced).
    Which encryption method are you using on the WiFi network ? Be exact.
    There's a big difference between WPA, WPA2 and WPA2 Personal (and a few others).
    Does the WiFi device have any filtering on it ? That could be anything from MAC address filtering to only using the wireless N protocol, which may xclude your wireless G (or wireless B) PowerMac.

  • Ipod touch will not turn on. Did a synch turned on. Then turned off.       and tried to restart. Apple logo came on screen for a few seconds then disappeared and cannot turn back on. This is a new replacement unit. only have had it 4 days.

    Tried powering on again after syn. Apple logo appeared for a few seconds then disappeared and now can not turn on. This is a replacement unit, only have had for 4 days

    Did you try to connect in recovery mode and restore "as new device", without using the latest backup afterwards? iPhone and iPod touch: Unable to restore and How to back up your data and set up as a new device

  • IPhone 3G displays apple logo for a few seconds then reboots (continuously)

    Hi all,
    So far my iPhone has gone from not turning at all to booting with the apple logo for a few seconds, then disappearing. My device will do this over and over again until the battery is dead. When I plug it into my computer, it works completely fine, syncs, restores, etc. The phone will remain powered on after unplugging from my computer, but my screen is unresponsive to touch and occasionally the lcd will become very dark (dimmed)
    My assumption as of right now is that it is a hardware issue, any suggestions or pointers for my next steps? I'm running out of ideas before I give it up and send it to apple

    Hello xtn,
    As paulcb mentioned, try resetting the iPhone. The behavior you've mentioned would be consistent with a stuck Sleep/Power button. However, it is odd that it mounts and works OK with your computer. A physically stuck button would tend to cause the iPhone to repeatedly mount and dismount from iTunes as well.
    One last thing you can try is to restore the iPhone and set it up as a new phone.
    If the issue persists, you may need to have it serviced:
    http://www.apple.com/ca/support/iphone/service/faq/
    Charles H.

  • When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

    You can take some of the steps here, #4, #5 or even trying a #18
    Step by Step to fix your Mac
    but I suspect your going to first have to create a data recovery drive
    Create a data recovery, undelete boot drive
    to get your data off the machine,
    then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
    Step by Step to fix your Mac

  • I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    I'm having problems with my app, plants vs. zombies 2. It'll open and stay open for a few seconds then shut down. Help please.

    Check to see if there are Updates available... If already up to date...
    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please?

    My iphone 4s wont turn on,it wont even charge,when it does eventually start to charge the apple icon on the screen will appear for a few seconds then itll disappear, i have tried to do the soft/hard reset but nothing happens, can anyone help me please? do i have a dead iphone on my hands? isit worth me going into the apple store and seeing what they can do or isit pointless? please help!!!

    Try to backup and restore you device in itunes...restoring the device is like removing the iOS software off the device and re-add in a newer software, after you have restore you device, MAKE SURE YOU SET UP YOUR DEVICE LIKE A NEW DEVICE, DONT NOT RESTORE FROM BACKUP!!... give the device a chance to use the newer software and see if the issue still persisting, if the issue still on going then its would be a hardware issue.
    Call Apple Care and see if your device is still under warranty to get it replace

Maybe you are looking for