P67a-gd55 and memory problems (xmp) and other things

my memory is gskill sniper 2*4gig sticks 1600mhz xmp- now if turn on xmp in the bios i get bsod`s and if i do a mem test in bios it says mem failed so i turn off xmp reboot and mem test passed i bumpt the bios upto v 1g(1.16) but still the same but as its already running at 1600mhz (without xmp) i can live with it unless somebody has an answer>
..second problem is that afer installing latest bios i have lost all settings under the hardware monitor,it used to tell the cpu temp and fan speeds but now its blank ...any ideas

flashed bios back to 1.15 and hardware info has returned ...did a memtest86+ v4.20 and passed,, so did a full cmos reset (no power) and went into bios and did f6 optimezed settings and went into utillities and did a mem test and FAILED so after updating my settings i rebooted and did a further memtest (in utilllitites) and passed....iam having trouble attaching a screenshot because when i click instert image nothing happens so i must be doing something wrong any help is accepted (using ie8)
on my asus mobo this memory is seen as spd 1333 with out xmp and 1600mhz with xmp.but this mobo puts as spd 1600mhz..once i find out how to attach a screen shot i will post a foto of cpuz mem and spd ok
http://s1098.photobucket.com/albums/g370/jackal121/?action=view&current=cpuz.jpg

Similar Messages

HT1688 My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should

My iphone 5 won't charge and it's in perfect condition, I dont drop it and it's not cracked. I tried multiple chargers, none of them are damaged and my outlets work with other things so the problem is my phone. What's wrong with it and what should I do? Please help me I need my phone for work.

Make sure there's nothing blocking a contact in the charging port of the phone.

Performance and Memory Problems on OSX

Firefox seems to have some sort of memory leak. Even once I remove all the add-ons, and no matter which web pages, after about a day, Firefox is slow and I have to restart the browser. When using the diagnostics within Mac OSX, Firefox is consuming twice as much memory as Safari and is consistently the biggest CPU consumer. It would be nice if someone profiled the code and actually made sure it was optimized.

We are with the same problem. We read a lot about the vm in the RHAS 3.0. The vm was improved but, with bugs. We found a lot of inactive pages that, after the clean state, does'nt deallocate properly. This makes the thread kernel "kswapd" works a lot, taking all the cpu in the io process.
There is a known bug related to "kswapd" thread in the RHAS 3.0 kernel. The RedHat promess to solve the problem in the nexts releases (I really doubt it, because there was already 3 releases after its announces).
We have checked some strange behaviors too... The machines with Linux RH AS 3.0 + Oracle products (OracleDB and OracleIAS) are freezing randomically. We think that the shared memory are allocating kernel space pages, but we didn't found any evidences yet.
The workarounds (not tested yet):
- Upgrade to the latest kernel.
or
- Use the hugemem kernel (even when using less than 16GB of RAM, some guys reported that this solve the problem)
or
- Compiling a clean kernel directly from kernel.org. In this case, we don't have support from Oracle, but maybe the problem could be resolved until RH publish some bugless vm code with your kernel.

Storage and memory problems on a new mac. PLEASE HELP

I had a macbook pro 5 years ago and backed everything up to my time machine. i just bought a new mac book pro yesterday. I only wanted to transfer my music and photo files over, and i somehow managed to do that but i think i made a mistake somewhere because now my storage memory is listed at over 400 gb used which i know is impossible. ive saved one document onmy new computer and the entire storage on the time machine is only 173 gb. I have over 300 gb listed as other on the new computer- at one point it was purple and categorized as backup but now it says other- can anyone help me?
my computer is running super slow now because of it and i just spent over 2000 dollars on this yesterday and I cant find anything in apple support to help me. i already tried looking through all the files and used the omni disk sweeper.
PLEASE HELP ME!
i have the mac os x 10.8.2

I tried running the uninstall blackberry software and it said it coudnt find anything to uninstall and self control doesnt have any uninstalll programs- do you know how else i can delete them or what else i should do? i ran the system again and have pasted the results below in case that would help- i dont really understand it - THANK YOU VERY MUCH for your time and help-i really appreciate it- i just want this fixed
Hardware Information:
          MacBook Pro - model: MacBookPro9,1
          1 2.3 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
System Software:
          OS X 10.8.2 (12C60) - Uptime: 1 day 0:53
Disk Information:
          APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (223.43 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          OPTIARC DVD RW AD-5970H disk4 : (690.9 MB)
                    disk4s1 (disk4s1) <not mounted>: 52.2 MB
                    disk4s2 (disk4s2) <not mounted>: 39.4 MB
                    disk4s3 (disk4s3) <not mounted>: 42.8 MB
                    disk4s4 (disk4s4) <not mounted>: 38.8 MB
                    disk4s5 (disk4s5) <not mounted>: 58.1 MB
                    disk4s6 (disk4s6) <not mounted>: 40.9 MB
                    disk4s7 (disk4s7) <not mounted>: 43.1 MB
                    disk4s8 (disk4s8) <not mounted>: 34.1 MB
                    disk4s9 (disk4s9) <not mounted>: 36.3 MB
                    disk4s10 (disk4s10) <not mounted>: 52.7 MB
                    disk4s11 (disk4s11) <not mounted>: 35.8 MB
                    disk4s12 (disk4s12) <not mounted>: 50.3 MB
                    disk4s13 (disk4s13) <not mounted>: 42.4 MB
                    disk4s14 (disk4s14) <not mounted>: 43.3 MB
                    disk4s15 (disk4s15) <not mounted>: 38.9 MB
                    disk4s16 (disk4s16) <not mounted>: 41.9 MB
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
                 [failed] com.apple.afpstat.plist
                 [failed] com.apple.coreservices.appleid.authentication.plist
                 [failed] com.apple.KerberosHelper.LKDCHelper.plist
                 [failed] com.apple.mrt.uiagent.plist
                 [failed] com.apple.pbs.plist
                 [failed] com.apple.rcd.plist
Launch Daemons:
                 [loaded] com.adobe.fpsaud.plist
                 [loaded] com.microsoft.office.licensing.helper.plist
                 [loaded] com.rim.BBDaemon.plist
             [not loaded] org.eyebeam.SelfControl.plist
Launch Agents:
                 [loaded] com.rim.BBLaunchAgent.plist
User Launch Agents:
                 [loaded] com.spotify.webhelper.plist
User Login Items:
          iTunesHelper
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
Internet Plug-ins:
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          OfficeLiveBrowserPlugin.plugin
          Photo Center Plugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
          Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
          None
Top Processes:
          16.3 %          WebProcess
          9.0   %          WindowServer
          3.6   %          coreaudiod
          1.1   %          EtreCheck
          1.0   %          iTunes
          0.9   %          PluginProcess
          0.4   %          BBLaunchAgent
          0.2   %          Safari
          0.2   %          NotificationCenter
          0.1   %          fontd

IPOD Freezes Itunes and Memory is full of "Other"

I have an 80g Ipod classic and i recently updated my itunes to version 10.6.1 (7). After my latest sync, my ipod now has no music but 1/2 the memory is full with "other". I have reset my ipod several times but the music fails to appear. I cannot restore my Ipod because when I connect it to itunes, the program freezes up. The application stops responding and I have to close Itunes all together. All of my music is saved in my itunes library and I dont want to lose any of it. Someone please help!!!
I also noticed that since the most recent itunes update I am having problems connecting to the itunes store. It keeps saying check the internet connection and try again. My internet works fine but for some reason itunes will not allow me to connect to the itunes store. PLEASE HELP!!!

I have a similar problem with my 120gb classic, my ipod shows no music or any data but states that memory is full of other, I've tried everything I can think of, rebooting does nothing, connecting to pc freezes itunes and I am unable to access in disk mode either, it shows in my computer but just hangs when trying to access it, so a reformat or restore is not an option, diagnostics shows an error when checking harddrive with HDSMARTdata. I'm sorry to say that I have a feeling that our hard drives are buggered cos surely if you cant access it you can fix it. Very dissapointed with apples service as mine was an under warranty replacent which was resseting itself randomly exessively often, sometimes up to 6 times a day from when I received it, I sent it back within two days stating it had a fault only to have it sent back the next day being told its fine! It is obvious that apple have sent me a replacement ipod with a recycled hard drive which was obviously faulty from day one and now its given up the ghost, I very much regret not holding my ground and demanding a fully working replacement at the time as now I have to fork out for yet another ipod!

JPA @Lob annotation and memory problem

Hi.
Is there any way to overcome the memory problem with @Lob types?
FetchType.LAZY means lazy as it spelled. Am I right?
And it doesn't mean any stream handling of big sized lobs. For lobs are so big that my physical memory can't hold it.
@Entity public class Parent implements Serializable {
    @Lob private byte[] big; // what can I do if it is to big to hold in memory?
}Is there any standard way for this problem?
I found that openejb serves *@Persistent* annotation for InputStream/Reader for this purpose.
But I want to know if there is another way for more portability.
You know what?
I heard from a JPA spec guy that this problem (maybe it's not a problem) won't even be considered in next version. (2.0?)
How horrible...
Is it can be a good think that split the Lob column into a OneToMany children?
This is the best output, for now, from my head.
@Entity public class Parent implements Serializable {
    @OneToMany private Collection<Child> children;
@Entity public class Child implements Serializable {
    @Lob private byte[] chopped; // small enough to fit into memory
}

If the Lob is too big for your memory, then you are best off handling whatever processing you need to do on it through raw JDBC. If your only interested on the first n bytes, then you could probably map to something like this using a view the truncate the lob, and map your class to the view instead of the table.
You should also be able to define your variable as Blob or Clob and get the locator directly. But the locator is tied to the connection, so will not be usable after the connection is returned to the pool. I'm not sure how such a lob could be model if it can't be read into memory, perhaps as some special JPA Lob type that can return a stream on the data by re-querying the lob from the db.
What exactly to you want to do with the lob?
-- James : http://www.eclipselink.org

6085 msging and memory problem

when i goto to get into my txt msg and go in to inbox the screen turns white and goes back to my wallpaper
also i recently bought a stick of micro sd memory for it and it worked fine but all of a sudden its not detecting it i have tried the memory on my mates phone and worked fine

Sorry to hear your woes there msx58m, sometimes things just don't as planned nice and shiny out of the box.
Strange how you were having trouble with the RAM as I thought it would have defaulted to 1066MHz or 1333MHz out of the box and 1.5~1.6V should have sufficed. A rule of thumb, always set your RAM manually including the voltage. As for the original BIOS problem... you'll probably find that the BIOS didn't recognise the 975 processor until the distributor updated the BIOS to a later release - this isn't anything new. 20/20 hindsight is a wonderful thing but you could have saved some of that grief by reading up on the pinned topics on this site and other website resources regarding memory voltages and timings.
Yes, Vista & Win7 and more demanding than XP (I found Vista the most demanding of the three) and it's reflected in the overclocks I could achieve across the platforms.

Mouse and memory problems (975X Pl pe)

First Hello,
this is my first post here, hope you can help me
PC configuration in my signature
OK. Here goes
1.   And most annoying problem – mouse problem (A4tech NB-90 mouse, connected to usb)
Mouse stops working, randomly (maybe once every month). It’s happening when booting windows. Mouse doesn’t work, actually all the led’s are blinking but it’s not recognized by windows. Disconnecting and reconnecting doesn’t work (nothing happens). Rebooting windows doesn’t help (still not working).
Solution to my problems is to shutdown the computer and disconnect the power cable from my PC, then reconnect it again and start the PC all over again. NOW it’s working!! WT ?
I tested mouse (3 months) on the other pc and it works OK there, so he is not the problem.
o yea, I formated hdd, and installed fresh windows and still no luck.
2.   Memory problem on 800MHz – I think this is because of incompatibility with motherboard or too weak psu
By default (motherboard)memory works on 667MHz. (and with this setup everything is fine)
The problem starts when I put it on 800MHz in bios – than system becomes instable (random reboots)
a.   Memory tested with memtest at 667MHz (both and than separate modules, 4 hours each test) -> NO ERRORS
b.   Memory tested with memtest at 800MHz (both and than separate modules) -> Never saw so much errors in my life :(
I doubt I’ll solve this problem (except buying new memory modules), but you guys know more than me so I’ll let you decide.
and yeah, sorry for my bad English!
Thanks
Bas
edit: memory problem solved. Patriot @ 800MHz needs 2.0V

hehe here you go
Quote
F E A T U R E S
PSD21G8002
Patriot Signature DDR2 1GB CL5 PC2-6400 (800MHz) DIMM
• PC2-6400 (800MHz) Data Rate
• 240-Pin Dual in-line memory module
• Non-ECC Unbuffered
• 2 Rank Double-sided module
• 7.8US Refresh Interval
(8192 CYCLES/64MS)
• 1.8V Power Requirement
• Auto and self refresh capability
• PCB height: 1181 (mil)
• Serial Presence-Detect (SPD)
• 100% Tested
• Lifetime Warranty
• RoHS Compliant
Quote from: Maesus on 26-March-07, 20:51:54
well... check the spec on website.

Big freeze and memory problems

Hello everyone
I'm pretty new in the wonderful world of ArchLinux. The installation was quite easy, thanks to the beginners guide and the wiki.
My laptop is a :
AMD Athlon Turion 64 1800 Mhz
ATI radeon xpress 200M
1024Mo RAM
So my system is currently like this :
Gnome + compiz-fusion
My ati is running with fglrx
Everything works fine except a "bizarre" thing with my memory.
When I start my computer :
top - 15:15:22 up 2 min, 1 user, load average: 0.64, 0.40, 0.16
Tasks: 104 total, 1 running, 103 sleeping, 0 stopped, 0 zombie
Cpu(s): 7.6%us, 6.3%sy, 0.0%ni, 85.4%id, 0.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 903920k total, 412252k used, 491668k free, 15900k buffers
Swap: 1164672k total, 0k used, 1164672k free, 148144k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3696 rydgel 20 0 10460 4472 3504 S 5.6 0.5 0:05.40 mpd
3697 rydgel 20 0 10324 3656 2728 S 3.3 0.4 0:03.44 mpd
3865 root 20 0 275m 86m 21m S 2.7 9.8 0:06.55 Xorg
4097 rydgel 20 0 38740 14m 10m S 1.3 1.7 0:00.43 gnome-terminal
4092 rydgel 20 0 19460 3956 3272 S 1.0 0.4 0:00.19 conky
28 root 15 -5 0 0 0 S 0.3 0.0 0:00.01 ata/0
3891 rydgel 20 0 5932 4412 1812 S 0.3 0.5 0:00.99 gconfd-2
3954 rydgel 20 0 84160 21m 14m S 0.3 2.4 0:00.77 nautilus
3966 rydgel 20 0 54932 13m 9.8m S 0.3 1.5 0:00.59 nm-applet
4072 rydgel 20 0 18144 8368 6732 S 0.3 0.9 0:00.15 emerald
1 root 20 0 1664 564 496 S 0.0 0.1 0:00.70 init
2 root 15 -5 0 0 0 S 0.0 0.0 0:00.02 kthreadd
3 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0
4 root 15 -5 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/0
5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
6 root 15 -5 0 0 0 S 0.0 0.0 0:00.01 events/0
7 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 khelper
And after a few minutes :
top - 16:47:47 up 59 min, 1 user, load average: 0.67, 1.58, 1.96
Tasks: 108 total, 2 running, 106 sleeping, 0 stopped, 0 zombie
Cpu(s): 13.7%us, 32.7%sy, 0.0%ni, 53.3%id, 0.3%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 903920k total, 893568k used, 10352k free, 85128k buffers
Swap: 1164672k total, 0k used, 1164672k free, 232032k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3862 root 20 0 314m 129m 32m S 19.6 14.7 7:53.44 Xorg
4183 rydgel 20 0 10456 4500 3508 S 14.3 0.5 5:07.84 mpd
4098 rydgel 20 0 242m 100m 27m R 14.0 11.4 9:35.00 firefox
4184 rydgel 20 0 10524 3996 2736 S 1.7 0.4 1:00.75 mpd
4061 rydgel 20 0 18124 13m 4616 S 0.3 1.5 0:23.53 compiz
4082 rydgel 20 0 20484 3988 3272 S 0.3 0.4 0:07.09 conky
1 root 20 0 1664 560 496 S 0.0 0.1 0:00.75 init
2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root RT -5 0 0 0 S 0.0 0.0 0:00.00 migration/0
4 root 15 -5 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0
5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
6 root 15 -5 0 0 0 S 0.0 0.0 0:00.09 events/0
7 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 khelper
8 root 15 -5 0 0 0 S 0.0 0.0 0:00.05 kblockd/0
9 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid
10 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kacpi_notify
11 root 15 -5 0 0 0 S 0.0 0.0 0:00.07 kseriod
So you can see that my free mem decreases dramaticly until it's 0 then .. FREEZE (about 8 s ) and after that 150Mb ~ free mem.
My memory grows when I do things like scrolling in firefox, watching video ..
And with my others distros I never saw something like that in the same configuration.
Maybe someone can help me

I've got similar problem. After 5-10 minutes of system uptime almost all my 900Mb of memory are used. Regardles of what DE I use (be it KDEmod3, KDEmod4, Gnome, XFCE, E17) - after 10 minutes of system works I have only 10-20 Mb free.
P.S. I do not use 3D graphical desktops.

KT4VL CPU and Memory problems

I have a KT4VL that I updated to BIOS version 1.60 with the liveupdate feature (I really like that by the way). Anyway, I have two problems with the board. I have a AMD 1700+ XP 1.47Ghz/266 CPU. The manual and your website says I should change the CPU FSB Clock under Frequency/Voltage control to 133 for that CPU. When I do, the system locks (corrupted a file and forced a reinstall of XP that was a pain). I've repeated that and when I change it back to 100Mhz, it doesn't lock. The web site says to change the CPU ratio to 11 with the 133 setting which I did but the system still locks/reboots suddenly. I even tried changing the Spread Spectrum setting from the 25% default to none but it still crashes.
The second issue is that I have a PC3200 DDR 256MB DIMM (Samsung
K4H560838D-TCC4) that is specifically listed in the manual as a recommended DIMM. However, if I put it as the only DIMM in the system, it doesn't POST or boot and gives 3 Long Beeps. The D bracket indicates that it's a memory problem. I exchanged the DIMM for the new one to make sure I just didn't get a bad one but it has the same behavior with the new one. When I put it in with a PC2700 DIMM I have, it doesn't boot or beep. It just sits there.
What BIOS settings do I need to put to support my CPU and memory correctly?

Bas,
Ok, I'll try 1.7. You think that will fix the memory problem?
The power supply is an AMD approved 350W power supply so I don't think that's it. I'll double check the cooling setup (it's a volcano so it oughta be good) but cooling could definitely be it.
The only thing I need you to verify for me is the BIOS settings...Will the AUTO setting work for the PC3200? Or do I need to specify it? And for the CPU, the FSB should be 133 and the ratio 11? Any other changes? Should I mess with the spread spectrum settings?
I guess I'd like to verify what my bios settings should be to support my CPU and memory.
Lastly, will I be able to use both my pc3200 and my pc2700 DIMM at the same time?
Thanks so much for your time and help.
-james

Nokia 5300 - Pc Suite Cd and Memory Problem *pleas...

Hey, Well i bought the nokia 5300 (love it minus my 1 problem)
So I installed the disk that came with the box (pc suite) and it worked. Now I enter the program and transfer a song from my computer to my phone and it says I dont have enough memory in my phone.
Problem is- The only thing I have on my phone is 4 ringtones I downloaded off of the phone. and about 6 contacts. Everything else that came with the phone is still on it minus a few graphics..me thinking it will free memory. But NOTHING. Still won't work! So do i need to buy a memory card or something (if theres such thing for this phone) so that i can get music on it, or do I have to do something else, like compress the file and if so how do I do that?
...thought it would be simple to do this but im really having problems with this. Help is much appreciated

Similar problems, but on a N73.
Every time I sync my phone it's a mission to get it working either via Bluetooth or USB. USB is a little more reliable.
So usually I get it working, but yesterday nothing could get it working. I managed to get a Bluetooth connection which stayed alive long enough to delete all my calendar entries ready to write a replacement but then failed. Now I have no appointments in my phone.
On the usb cable the symptoms I get are that the phone recognises when I plug the USB cable in and briefly displays that it is enabling PC Suite mode, but that's it. No other indication (I think usually there's a little icon on the right that indicates PC Suite operation,
PC Suite on the PC doesn't recognise that there is any phone connection.
I went into the PC Suite profile in my phone and I was intereste to see that only two options a given for connection "Bluetooth" and "Internet". Is this normal? Remember I have been using USB with PC Suite fine for some time and with no other change it now doesn't work.
I eventually uninstalled and reinstalled all Nokia stuff and the Bluetooth drivers and software.
But alas no change. Phone is still not recognised.

K7t turbo2 and memory problems!!!

Hi guys. Need your help w/ this weird situation. I am plagued by hangups w/ my system. One of you told me that maybe my memory was bad so I bought a spanking new 256mb pc133 dimm SDRAM...and my comp still hangs. When I use both of my 256 it still hangs when windows is about to start. Strangely, I could use my comp. w/ my original 256 w/ just occasional hangups..but since last week it hangs everytime windows xp pro or win2000 pro starts. I see the stuff loading and my desktop icons and then wham!! it freezes. But here's the funny thing...when i use my old 64mb pc100 mem it works perfectly, except that it is extremely slower..BUT NO HANGUPS. Now I'v crossed off several suspects off my list 1) my 256 mem sticks aren't bad cause the brand new one does the same thing as the older one, so there's no static or anything 2) my power supply s/d be ok it's 350W and even when i unplug all my drives and leave just 1 hard drive it still hangs w/ the 256 or 512 (mixed). So i'm wondering if it's 1) some config in the bios i need to tweak...but like i said it used to work fairly well w/ the 1st 256 untill recently or 2) my cpu is an AMD athlon 1333, which gives me 1ghz and it can only run at a clock of 100. if i unjumper J17, it can't run at 133. So i'm wondering if it's because my mem sticks are running at 133 but the cpu is 100..it causes a prob and thus hangs; and my 64 mb mem stick is at 100mhz..so it's the same clock speed as my cpu. But if that was it..how comes I used to run the 256 pc 133 w/ this same cpu w/ just hangups occasionally ..but now I can't start windows any at all??? any ideas w/d be welcomed. Also, could u tell me a couple athlon xp that u know for sure run at 133 mhz clock speed, eg: can the xp 1700 run at that. I have an MSI K7T turbo2, 2 hard drives (10G & 30G) winxp and win200, both pro..and an amd athlkon 1333 (not xp) :O X(

What is the CAS latency rating of both your 256 stick ?
On the issue of running a pc133 ram in 100 it should work fine as u underclock the ram instead of over it.
I am using k7t turbo2 rev 5.0 with 133 enabled.

Z87-G45 Ethernet and USB problems. And BIOS flash problems

Hi. I kind of have a problem and hope you guys can help me.
I got this motherboard yesterday but I got a major problem with the Ethernet connection. It will simply not work, it’s totally dead. I have tried to enable everything that has to do with the Ethernet (Settings/advanced/intergrated peripherials) but it still will not work. There is no light at the back side that indicates that there is signal when I plug in the cable. I have tried the cable on my laptop so I know there is signal.
There is no problem installing windows, but I can’t install the drivers for the ethernet. I get an error message then that there is no hardware that can use this drivers.
Are there any places in the BIOS where I can enable it? How can I get this up and running?
And my USB driver is kinda messed up too. My 120MB UBS pen is found and can be used, but my 64Gb flash pen and my 500Gb USB HDD will now work with the USB. I only get the USB "ping" connection sound over and over and over and over again with the windows error, drivers not installed.
The other thing about the USB is that every time I restart the PC, I have to unplug the mice and put it into an other USB to activate it.
I have tried to flash the BIOS, but when I try (after pushing m-flash and connecting the USB and finding the file), the whole BIOS just freezes up and nothing happens. I try to wait a bit but nothing happens. I have to manually restart the machine by "force" (Turning the power to PSU off and on again. Ayone know if there is a problem with flashing the BIOS from USB? Or maybe that the USB system is messed up? Any other way I can flash the BIOS?
I have downloaded all the latest drivers and updated.
Best regards
Robert

Quote from: flobelix on 08-January-14, 00:44:08
Again do not try to use MFlash. Try the board outside case like suggested.
THis is making me frusterated now......
I have now had the motherboard on my wood table with a antistatic tablecloth and antistatic armband.
I only plugged in 1 ram, power, a monitor and mouse/keyboard(USB).
I manage to get the USB pen bootable so I could do the memtest and biost flash.
The USB ports are still unstable. I still have to move my mouse and keyboard from slot to slot when I restart the machine. It feels like if random USB conection is being turned off and on for every time I start the computer.
I connected a HDD to install Windows 7 64bit.
The computer will still not read USB storage with larger then my 120mb storage in both the BIOS and Windows (I suspect that 1GB is the limit for some rason). It only shows that USB device was not installed.
After I isntalled the USB 3.0 drivers that came with the mother board, the USB 3.0 system just stoped working. I tryed to update the drivers to the latest ones, but they still dont work. The USB 3.0 drivers do work in BIOS, but the drivers that came with the motherboard does not support windows 7 64bit. Or this motherboard.....
The ethernet conection is still FUBAR. When I try to install the drivers from the CD, the "LAN picture" is still grayed out. And when I try to force install the drivers, nothing will accept the network connectin. Trying to install the Killer Network Manager just ends up in "No supported hardware found in your system". It is like that the ethernet system is turned totally off.... But in the BIOS is marked as enable.
I have tryed to installe Realtek drivers, Intel drivers and the Atheos drivers, but non of them will install, all just say that there is no network that supports this drivers.
I am at my wits end right now. During the last 15 years I have build about 20 computers and this motherboard is taking 1st price for being the worse one ever.

Can Time Capsule be used for both Time Machine back-up and a place to store other things?

I thought I had heard that it was best to keep whatever external drive you use for Time Machine to be exclusive for Time Machine back-ups. Does Time Capsule automatically partition an area for Time Machine. Also, since Time Machine auto deletes some things when the external drive gets full, does it just keep backing up until it fills the Time Capsules 2 TB or whatever the space is? Thanks in advance for help.

It does not partition the drive but creates a sparse bundle which acts as a sealed directory.
You can store other things on the TC. Just create a new directory for your stuff.
The TC needs to have at least 2 or 3 times the space used by your hard disks in all your computers. So it can manage a full backup plus the hourly incrementals.. !! It can take a long time to fill up if you don't change stuff around much.. or it could fill up relatively quickly if you constantly load files in and out.
Remember though a TC is not a NAS, it has no mirror and if the TC is the only copy of some files you are storing on it, and the TC breaks down, then those files are lost.
I have seen others suggest it is better to use a USB hdd connected to the TC to store files you want access to. Balance between storage and backup won't be that difficult. If the TC is becoming full, make a decision about where you want to store those other files.

Bios and memory problem with a P67A-GD80‏

Hi, I'm experiencing 2 problems with this board and I have not yet install an OS in it
first problem : in the bios if I go in the section Green Power, the system froze, I have to press reset to reboot
second problem : if I install 2 stick of memory in the blue slot, it work fine
if I remove them and place them in the black slot, it work fine
if I place 4 sticks at the same time, the system crash and reboot and make a loop
here the stick I try : Patriot PVV34G1600LLR 4 of them
G Skill F3-12800cl9q-16GBRL 4 of them
I see that new version of BIOS is supose to fix some problem with compatibility of memory, the problem is the way the board shut down when I put 4 stick, it's like the board is overload the led don't act like when you press the resset, they kind dim before the board crash
thanks and sorry for my english , I must add that it's more than 25 years I build computer I build around 3 a week, I have never RMA one motheboard until now.

Quote
the problem is the way the board shut down when I put 4 stick, it's like the board is overload
Quote
do you mean I have to enable XMS ?
Actually, it's not likely a mainboard overload at all, it's probably the CPU IMC having the problem. Enable of X.M.P. is the last thing you want to do. If the RAM has to be set in this manner, it is not programmed to properly default at the platform's designed specifications. BIOS revisions dealing with compatibility are being worked on to make up for this RAM manipulation.
My apology to the OP in advance for the next comments. Some here at the forum have been advised before, that having to set X.M.P. to get the RAM to work properly (having to OC it) is a wrong way to go about it. The platform must first be able to run at stock/auto/default with no issues 'first', then venturing off to more exotic settings later if desired. This 'forcing' of non spec 'rated' RAM & programming is purely product marketing tactics. As mentioned, with four sticks of RAM, the CPU IMC may require an increase of DRAM V. Here is the official specifications from the current Intel data. This data is not really open to debate. For those that have issue with it, take it up with Intel!

P67a-gd55 and memory problems (xmp) and other things

Similar Messages

Maybe you are looking for