P67A-GD55 - Random BSODs with varying codes

Hey guys,
I'm sort of reaching the end of the line with my troubleshooting resources, so I'm hoping someone here can possibly provide me a little assistance. As the title indicates, I'm experiencing random BSODs on a newly built system. Below is what I have done to troubleshoot, as well as the specs.
MOBO - MSI P67A-GD55 (B3)
CPU - Intel Core i5 - PN BX80623I52500K
PSU - CORSAIR HX Series CMPSU-850HX 850W
Memory - Corsair XMS3 DDR3 1333 (2x4GB) - PN CMX8GX3M2A1333C9
HD - OCZ Vertex Series OCZSSD2-1VTX30GXXX SSD
HD - Seagate Barracuda 7200.12 ST31000528AS x2 (Raid 0)
Video - EVGA 01G-P3-1373-AR GeForce GTX 460
Updated all drivers to current revisions
Updated BIOS to latest revision
memtest86 - Over 24 hours of testing, all testing options, 10x passes - No errors
Windows Memory Tester - Over 24 hours of testing, full options - No errors
PSU Test - Checked every connection coming off of the PSU and all voltages are appropriate
Just for fun I've run the system with memory in varying slots and with varying sticks. No dice.
superpi - I've run this up to 32m on all cores on the CPU multiple times just to see if this causes any crashes despite the CPU being at stock config. - No errors
BSODs I have seen:
APC_INDEX_MISMATCH
MEMORY_MANAGEMENT
SYSTEM_SERVICE_EXCEPTION
dxgmms1.sys
And about 12 others that I didn't note at the time for some reason.
Other odd behavior:
After some BSODs, the system rediscovers all my USB devices that I have attached.
I've done research on the individual codes, but the solutions are like throwing darts at a dart board. I'm suspecting at this point that I either have a bad CPU or Mobo.
Also note that nothing is overclocked.
Any thoughts or ideas?
TYVM in advance.
-JT

Quote from: Somewords on 07-May-11, 06:47:01
PSU - CORSAIR HX Series CMPSU-850HX 850W
is your psu over powered?
mine is 500w silverstone.
running i5 2400
gskill 4gbx2 10666cl7
palit 550 ti sonic
wd cavier blue 320gb 6gb/s and seagate 320gb 3gb/s
sony dvd-rw lightscribe

Similar Messages

MacBook Pro Random Shutdown with Error Code: 4SNS/1/40000000: TAOP

Hi All,
Hope you can help, I have a 1st gen, MBP which i've recently upgraded the HD to a 500gb. Has been working perfectly until today when it had a few instances of random shut downs and not being able to power up...
Got this error code while checking the Hardware test, but not sure what it actually means : 4SNS/1/40000000: TAOP
Anyone got any ideas?? The HD is fully compatible and has worked flawlessly since installation, but now wondering if it has something to do with that??!
Hope someone can shed some light,
Thanks!
Darren

I too have a MBP 15". After 3+ years of good operation, it's developed a sudden shutoff. It happens when the machine is hot. I can get it happen often if playing a web video in Safari.
I've also run AHT and got error 4SNS/1/40000000: TCOP
Troubleshooting:
I used the widget iStat and the utility smcFanControl to monitor the CPU temperature and fan speeds. I found a direct correlation between CPU temperature spikes, fan speed, and shutdowns. My machine shutdown/failed immediately if the CPU spiked for 2 seconds above 120 Celcius - that's a hot spike. I think it's a safety shutdown.
By using the smcFanControl, I could nearly eliminate the shutdown by forcing the CPU fans to run full speed (6,000 RPM). This way, I could keep the temperature between 68-100 Celsius. However, I could still create conditions using multiple web video playback in Safari & Firefox that could spike the temp above 120 C. I found that running fans at full speed were not enough. Something additional must be wrong regarding heat transfer or sensing. So, I'm guessing the thermal grease on the CPU heatsink is old/dry/cracked. Or, there is dust/link blocking the airflow. Or, there is a design flaw with the heatsink so that it is insufficient to cool or monitor the CPU temperature properly. Not sure yet.
I see on other forums that there is a new heatsink design and part number. The design has better thermocouple placement. And, if replaced, it will have new thermal grease.
My question is: How can I purchase a new replacement heatsink for my MBP? Anybody know part numbers or vendors?

Random BSOD after installing Windows 8.1 on Lynx K3011

I upgraded the graphics drivers as intructed her in another thread and that works now. However I keep getting a random BSOD with the error MEMORY_MANAGEMENT.
I did a bug check analysis and this is the result:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\101413-9031-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.16384.x86fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0x81c14000 PsLoadedModuleList = 0x81e0e218
Debug session time: Mon Oct 14 12:47:54.837 2013 (UTC - 7:00)
System Uptime: 0 days 0:00:09.648
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {1238, 85ea6368, 802, 0}
Probably caused by : rdyboost.sys ( rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c )
Followup: MachineOwner
3: kd> !analyze -v
*                        Bugcheck Analysis                                    *
MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
Arguments:
Arg1: 00001238, The subtype of the bugcheck.
Arg2: 85ea6368
Arg3: 00000802
Arg4: 00000000
Debugging Details:
BUGCHECK_STR: 0x1a_1238
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 81d63c8d to 81d14ce4
STACK_TEXT:
8b90ebf0 81d63c8d 0000001a 00001238 85ea6368 nt!KeBugCheckEx
8b90ec38 82d1abb4 85ea6368 8506b040 00000162 nt! ?? ::FNODOBFM::`string'+0x355e7
8b90ec54 82d18dec 00000000 8506bd10 00000001 rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+0x4c
8b90ecc4 82d1704b 00000000 86291040 8506b008 rdyboost!ST_STORE<SMD_TRAITS>:tDmPageRemove+0x3ac
8b90ed00 82d1739e 00000000 8506c200 83a4b040 rdyboost!ST_STORE<SMD_TRAITS>:tWorkItemProcess+0xf3
8b90ed40 82d266a0 ce25f08e 00000000 8506c200 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorker+0xfc
8b90ed70 81cc36a8 8506b008 61b2fcc6 00000000 rdyboost!SMKM_STORE<SMD_TRAITS>:mStWorkerThread+0x1d
8b90edb0 81d2a701 82d26683 8265bf68 00000000 nt!PspSystemThreadStartup+0x58
8b90edbc 00000000 00000000 2444c718 80000010 nt!KiThreadStartup+0x15
STACK_COMMAND: kb
FOLLOWUP_IP:
rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
82d1abb4 6a00            push    0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: rdyboost!ST_STORE<SMD_TRAITS>:tReleaseRegion+4c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: rdyboost
IMAGE_NAME: rdyboost.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52158f40
BUCKET_ID_FUNC_OFFSET: 4c
FAILURE_BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
BUCKET_ID: 0x1a_1238_rdyboost!ST_STORE_SMD_TRAITS_:tReleaseRegion
Followup: MachineOwner
Any ideas? Probably more incompatible drivers. If I can't get Windows 8.1 running correctly, does anyone know how to restore the system image?
Solved!
Go to Solution.

this error is so much obvius.
just look on internet on how to disable readyboost. additional just turn off the hybrid function and u will never see this bsod again, even i dont know how dumb ur mediacenter edition is and want to give u other bsods. btw i only seen bsods couse of **bleep** driver on my devices. donno how u manage to get such bluescreens......
btw according to the results i recommning ya to use ckhdsk /f to ur disk. mstWorker is mentioned wich means read write issues on access files. mstworker is microsoft Tiworker, an process wich examines files an bit. used by winupdate and the indexer.

P67a-gd55 multplier not dropping on idle

OK guys. I have the MSI P67A-GD55 B3 mobo with the 1.11BIOS updated with an i7 2600k CPU
I have noticed 1 problem with the current BIOS update and would like someone at MSI to test and possibly do another update for this if needed.
I have the following setup
C1E support enabled
CPU ratio : 34
Base Frequency : 1000
Internal PLL Overvoltage : enable
EIST : enable
Internal Turbo boost : enable
Adjust DRAM Frequency : 1600
vDroop control : lower
Intel C-State : enable
If I do a factory restore and set this settings without touching the CPU ratio(multiplier), then the CPU multiplier will drop to x16 when idled.
If I go back into the BIOS and change only the multiplier up to 60, keep going up to cycle through and set it to 34 again, then CPU multiplier no longer drop down when idle inside Windows.
Ideally, I would like to over lock the CPU to x42 and still retain the abily tohave the multiplier drop when idle.
Can someone look into this and test if it happens to them as Welland/or how to fix it.

I think I know what you are talking about. You want to use the Intel Speed Stepping feature (have the CPU idle at a low Freq, but then turbo boost to a higher freq). For the MSI boards this is possible, but you can't do it via the CPU Multiplier. You have to use the CPU Ratio Limit setting. To help you, here is my bios settings. My P67A-GD55 board is using Bios 1.9.
The below settings allow my i2500K process or idle at 1.6Gig, but then turbo boost to 4.2Gig under heavy load. Please be sure you have a good CPU cooler before doing any O/C'ing.
Overclocking Menu:
CPU Base Frequency [10kHz] [10000]
Adjust CPU Ratio [33]
Adjust CPU Ratio in OS [Disabled]
Internal PLL Overvoltage [Auto]
EIST [Enabled]
Intel Turbo Boost [Enabled]
DRAM Frequency [DDR3-1600MHz]
Extreme Memory Profile (X.M.P) [Disabled]
DRAM Timing Mode [Auto]
Spread Spectrum [Disabled]
VDroop Control [Auto]
CPU Core Voltage [Auto]
CPU I/O Voltage [Auto]
DRAM Voltage [Auto]
System Agent Voltage (SA) [Auto]
CPU PLL Voltage [Auto]
PCH 1.05 [Auto]
DDR_VREF_CA_A [Auto]
DDR_VREF_CA_B [Auto]
DDR_VREF_DA_A [Auto]
DDR_VREF_DA_B [Auto]
Overclocking/CPU Features Menu:
Active Processor Cores [All]
Limit CPUID Maximum [Disabled]
Execute Disable Bit [Enabled]
Intel Virtualisation Tech [Disabled]
Intel VT-D Tech [Disabled]
Power Technology [Custom]
C1E Support [Disabled]
Overspeed Protection [Enabled]
Intel C-State [Enabled]
Package C State Limit [No Limit]
Long Duration Power Limit (W) 110
Long Duration Maintained (ms) 1000
Long Duration Power Limit (W) 130
Primary plane turbo power limit 0
1-Core Ratio Limit 42
2-Core Ratio Limit 42
3-Core Ratio Limit 42
4-Core Ratio Limit 42

P67A-GD55 Sata port multiplier compatibility

Hello!
I'm trying to figure out if any of the six sata ports on my P67A-GD55 are compatible with SATA port multipliers. I can't find any information on this anywhere.
The ports are two SATA 3 and 4 SATA 2.

No sir.
Not for us here on these MSI motherboards, and for the most part, not for anyone.
Intel wants ICH* chipset implementations to be point to point, for whatever reason.
They do not support PM, even though they are technically capable of it! Nice guys.
There are two different implementations of PM, one being the "real" Port Multiplier, so to speak.
You might want to do some research, ie. the difference between CBS (Command-Based Switching)
and FIS (Frame Information Structure) aka FBS. Just Google all those terms together like
"sata port multiplier cbs fis fbs switching" etc. and you'll find more information than you ever wanted to know.
Just kidding.
This will get you going: ATA Wiki @ kernel.org: SATA Hardware Features
While what you choose might depend on your specific PM Host controller in the box you want to hook up,
as a general guide I'd look at the cards that support FBS and have the most "yes" columns; at least AN, and things like NS/NQM are gravy.
You'll notice the one I mention that's on the P67A-GD65, the Marvell 91xx, it supports FBS & AN, and as I said above,
it works great with 4 drives on either port (SilImage SteelVine PM Host). I'm also partial to the Silicon Image SI3132 & 3124 cards,
they rock, and you can find cards based on them for under $20usd anywhere.
If you only have one PM Host you want to connect I'd say it's a no-brainer to go with the same manufacturer for the SATA card's chip.
Nothing says speedy and stable like a matched pair, right?
But to reiterate, no, you will not be connecting a port multiplier host to any of those motherboard ports.
With the Intel RST driver it will detect an "unknown" drive of a whopping 0 bytes capacity.
HTH!

P67A-GD55 boot stops at POST 99 w/ 1-long+2short beep code.

Well subject line tells most of the story:
P67A-GD55 boot stops at POST 99 in lower right of display and with 1-long+2short beep code.
I've found a note somewhere on these forums that 99 code means Super IO initialization, though I'm not sure if this is the checkpoint before or after that process.
I've found generic information that suggests 1long+2short beep code indicates a video card failure.
I'm surprised that the manual for the MB doesn't list these codes, and that they weren't listed in the troubleshooting FAQ on the MSI site. So I still wonder if it may mean something else.
I've disconnected all the SATA connections, and removed all pci cards except for the video card. Guess I'll try disconnecting the front-panel usb connectors too in a moment, but I'm running out of ideas.
With a EVGA GT520 video card, I get these symptoms regardless of which pcie slot I put the card in.
With a Galaxy 8400GS the beep code is the same but no output is ever visible on the display. It seems possible that I just need an adapter to use the other connector on this card to see the output though.
With a EVGA 7800GT the symptoms are the same as with the EVGA GT520
If I try removing the memory sticks I get 3-long beeps followed by system shutting itself down.

Run of the mil keyboard. (has a logo with a circle containing a crescent containing a D). Suppose I could switch to a usb keyboard around here somewhere.
Disconnected the logitec usb mouse that I had connected to the back panel with no change in symptoms.
Toughpower-650 power supply (had been in use on a system that was running an athlon x64 and the GT7800GT graphics card.
2 sticks PNY DDR3 PC3-10666 4G ("compatible with 1333MHz") 1 stick in each blue slot.
No idea how to tell you the UFEI/BIOS version. The manual says its "CLiCK BiOS" but since I've never seen anything but 98,99 and _ displayed by the BIOS I really don't know.
Removing the case front panel USB connectors didn't change symptoms.
Resetting the bios by the button at the back panel connectors (near keyboard connector) didn't change anything. (although it did not cause "system will boot automatically" as a line in the manual might suggest.
Tried using the JBAT connector to clear the bios as well and likewise no change in symptoms.
There are no peripherals connected other than case power switch, power LED and HDD LED at this point. Somehow I don't expect much change from disconnecting LED's. Case switch seems to be behaving normally in that it causes the boot cycle to start, and if pressed while the "99" is sitting there in corner of screen it causes machine to shut down.
No SATA devices are connected to it since they won't really be useful untill can at least get to the BIOS. The sata cables that would go to those devices are still connected to the MB.
CPU:i5-2400 3.1GHz 6MB Cache LGA1155 95W
Heatsink:Cooler Master Vortex PlusRR-VTPS-28pk-r1 connected to the CPU fan connector on MB.
No sysfan connections to MB.

P67A-GD55 problems with GTX 780

I have the same problem as the guy in this thread:
https://forum-en.msi.com/index.php?topic=169438.0
I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
it boot up windows.
I have used Live Update 5 to upgrade to the latest bios (Live Update says the new 1.J0 version is the latest)
but the problem is still there.
If i want to access the BIOS i have to switch the cards :(
My system:
I7 2600k
P67A-GD55
2 x 4 Corsair DDR3
GTX 780 (previous card was a GTX 580)
Win 7 64-bit
Help would be much appreciated

Quote from: Ywap on 04-June-13, 02:41:05
I can´t access the BIOS with the GTX 780. I just get a black screen with B2 code for 2-3 minutes and then
it boot up windows.
New graphic cards need 4.XX bios.
The last is 4.30 bios.
You have to download the archive here : https://forum-en.msi.com/index.php?topic=164135.0
An use this archive with MSIQ USB Bootable tool downloadable here : https://forum-en.msi.com/index.php?topic=116721.0
Use Method 1: Processing a BIOS Archive Directly (ZIP/RAR).
Then clear CMOS.
Then Reboot and SUPPR button to enter the bios
Dont upgrade Intel Management Engine drivers to v8, because you have i7 2600K sandy bridge processor. Stay with IME v7 drivers
Goog luck

8GB of RAM Installed, only 4GB detected/used by BIOS/Windows 7 (with P67A-GD55)

Let me start off by saying that I'm not very good with computers. At all. I know a little bit about them, but I am by no means an expert. That said, I have 8GB of RAM installed on my motherboard, spread out across 4 sticks. However, upon looking at my BIOS and my Windows Resource Monitor, it declares that I only have 4GB of RAM installed and usable. This is what I know so far:
- This issue has been prevalent as long as I've had my computer, and by extension my motherboard and my RAM sticks, so this issue isn't recent.
- I do have a 64bit version of Windows 7. I've checked and double-checked, and I'm 99.5% positive that it is.
- Speccy, a 3rd party program designed for checking system specs, declares that I do, in fact, have 8GB installed.
- I don't think that the RAM is bad because the BIOS still does pick up on different statistics of the RAM that are in the slots; it just fails to register the actual fact that they're there.
System Specs:
OS: Windows 7 64bit SP1
CPU: Intel Core i5 2500K @ 3.30GHz
RAM: Patriot PSD32G133K 4x2GB DDR3 @ 498MHz
Motherboard: MSI P67A-GD55 P67 LGA 1155
HDD: 977GB SAMSUNG SAMSUNG HD103SJ ATA Device (SATA)
Optical Drive: LG DVDRAM GH24NS50 ATA Device
GPU: AMD Radeon HD 6870 1GB VRAM
PSU: Cooler Master 750 Watt
BIOS Version: E7681IMS V1.5
Now this is where it gets interesting: My motherboard has 4 DIMM slots for the RAM, and the motherboard (I assume by default) works in dual-channel mode. This means that DIMM 1 and 3 work together and so do DIMM 2 and 4, which most of you probably understand. However, filling up all 4 slots only gives me half the RAM. So I remove the RAM from slots 2 and 4, and it results in all 4GB of RAM being detected. Then, I add in each other RAM stick one at a time, and it fails to register both. So I remove the RAM from slots 1 and 3, and keep the RAM from slots 2 and 4, and it ends up in all 4GB being registered.
I feel like the answer should be directly in front of me, but from endless Google searches and posts on other forums, I have ended up at a dead end. I'm completely clueless, so I could really use some help.
Any and all help would be appreciated.
Also, if this is the wrong forum for this, feel free to move it wherever.

Quote from: Jack on 28-August-11, 01:11:56
What is your current UEFI/BIOS Version?
The usual cause of such problems is (apart from bad memory slots or a defect of the processor's memory controller) a contact problem between the boards CPU Socket contact pins and the CPU's contact pads. Broke or bent pins are one explanation, in other instances a heatsink that is fastened to tight can also cause such issues.
I'll have the BIOS version up in a moment, but I'll see about diagnosing if one of those problems might just be what is my problem. Any tips on doing that?
Also, BIOS version is up in the OP now.

My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. Please help!

My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.

Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh

Windows Server 2008 SP2 randomly reboots due to lsass.exe failed with status code 255

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

Hello,
Any help on this issue would be greatly appreciated. I have an older Windows Server 2008 SP2 (I don't believe it is R2) (running SQL Server 2008 and SSRS 2008 on the machine) that is crashing randomly
during business hours. Looking into the event logs, I have found the following:
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066d9669a3e1c.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code 255. The machine must now be restarted.
The process wininit.exe has initiated the restart of computer RIDEDB02 on behalf of user for the following reason: No title for this reason could be found
Reason Code: 0x50006
Shutdown Type: restart
Comment: The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code 255. The system will now shut down and restart.
I found a Hot Fix for a similar issue (https://support.microsoft.com/en-us/kb/2732595?wa=wsignin1.0), but it appeared to only be applicable to Windows Server 2008 R2 and Windows 7.
A few hours later, the crash happened again, with a slightly different error:
The system process 'C:\Windows\system32\lsass.exe' terminated unexpectedly with status code -1073741819. The system will now shut down and restart.
Faulting application lsass.exe, version 6.0.6002.18541, time stamp 0x4ec3ca01, faulting module msvcrt.dll, version 7.0.6002.18551, time stamp 0x4ee8d118, exception code 0xc0000005, fault offset 0x00000000000011ad, process id 0x284, application start
time 0x01d066fa9d74c5d7.
A critical system process, C:\Windows\system32\lsass.exe, failed with status code c0000005. The machine must now be restarted.
The security package Kerberos generated an exception. The exception information is the data
I have been unable to find a reason for these exceptions and the server rebooting. Any thoughts or ideas on how I can correct this error so it doesn't reboot our server again? .
Thank you,
Ben

How to get higher cpu voltage during load when using "auto" with P67A-GD55?

I have a little question regarding cpu voltage: When i set vcore to "auto" i get a nice low voltage when idle but during load i only get 1.264 max and that is to low.
Is there a setting to increase the voltage during load and still have the cpu vcore set to auto?
Thanks
System:
P67A-GD55 with 1.8 bios
I7 2600k
8gb Corsair

Quote from: Bernhard on 01-May-11, 15:25:22
OK, so you are able to set your CPU voltage manually. You need to consider that the auto voltages will compensate only up to a certain OC level, after which the user usually has to do manual adjustments. This auto compensation differs for each hardware combination. As HU16E suggested, try low VDroop and see if it helps. The other alternative is a BIOS flash, or manual voltage settings.
I tried low vdroop but it didn´t make any difference. But it´s ok, i can set the vcore manually but i was just investigating if i could get the best of both worlds with the powersavings auto vcore offers during idle

HDD Freezing and dissapear with SSD + P67A-GD55

Hello people
I have just renove my computer and bought this:
CPU     QuadCore Intel Core i5 2500K, 3450 MHz (35 x 99)
Motherboard   MSI P67A-GD55 (MS-7681)
GraphicCard   NVIDIA GeForce GTX 560 Ti (1024 MB)
Memory G Skill F3-12800CL9-2GBXL   2 GB DDR3-1600 DDR3 SDRAM
Sound     Creative SB X-Fi XtremeMusic/Platinum Sound Card
SSD    OCZ-VERTEX2 ATA Device (SATA-II)
I have just add also my old CorsairHX520W powersupply plus one Western Digital Green of 2TB and one Velociraptor of 300GB
The thing is that when I finish of installing Windows 7 x64 and all the drivers, when I for example use intensely the Velociraptor it freezes and finally dissapear of my computer. And then after a lot of reboot i cant initiate Windows. I am desperate. I think is related with Intel RST drivers, SATA or ACHI.
If you need to know I have install all in ACHI mode, Vertex2 in SATA0 port, Velociraptor in SATA1, and the GreenCaviar2TB in SATA3.
Any suggestions or ideas to fix it? Thanks!

Quote from: HU16E on 08-June-11, 17:23:12
Since the OP hasn't done a followup post since April, we don't really know the outcome. No indication if he had a B2 board or a B3. It would be best if you open a fresh new thread. Please include all the systems components.
This can be further discussed in your own thread.
Ok.

MSI P67A-GD55 Blue Screen at Shut Down or changing users

Blue Screen happens at shut down, not always, sometimes frequently but later stabilizes for a while. Computer is stable when it is working, not sudden blue screen, only happens at shutting down.
Configuration
MSI P67A-GD55 B3
INTEL Core i5 2500 3.3 Mhz
Super Talent DDR3 1333 CL9 1.5 Volt 2GB X 2 WA133UX4G9
MSI N440GT Video Card MD1GD3
2 Samsung HD103SJ 1TB Raid 1 Configuration Mode RAID
CPU Cooler Master Hyper 212 Plus
PSU Cooler Master Silent Pro M 850W
The video card was changed, before was MSI R5570 MD1G but the behavior remains the same
Could this issue be related to the problem??
http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=308&ref=dynamitedata.com

Quote from: NovJoe on 25-October-11, 11:09:05
I suggest that you test with one piece of RAM at a time. It may be a RAM problem.
Do post the code of the BSOD here to let us identify what the exact problem may be.
Hi, I already have two .dmp files but I don't know how to insert them in the message or open them to see the contents.
Firma con problemas:
Nombre del evento de problema:   BlueScreen
Versión del sistema operativo:   6.1.7601.2.1.0.256.48
Id. de configuración regional:   6154
Información adicional del problema:
BCCode:   1000008e
BCP1:   C0000005
BCP2:   00000000
BCP3:   AADA3AD4
BCP4:   00000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   256_1
Archivos que ayudan a describir el problema:
C:\Windows\Minidump\092811-13494-01.dmp
C:\Users\Osvaldo\AppData\Local\Temp\WER-7717650-0.sysdata.xml
Lea nuestra declaración de privacidad en línea:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0c0a
Si la declaración de privacidad en línea no está disponible, lea la declaración de privacidad sin conexión:
C:\Windows\system32\es-ES\erofflps.txt

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

P67a GD55 B3

Main Board: MSI P67A-GD55 Socket 1155, P67, ATX B3
Bios Version: Update from 1.8 to 1.19
Video Card: GF GTX 570 Windforce
PSU: Corsair AX 850W 80+ Gold
CPU: Intel Core i5 2500K 3,3GHz
Memory: Corsair 8GB (2x4096MB) CL9 1600Mhz XMS3
SSD/ HDD: HD1TB Samsung SP SATA-2 7200RPM Spinpoint F3
CPU COOLER: Noctua NH-U12P SE2
Raid Card: ?
Sound Card: Realtek integrated
Any Additional hardware plugged into your system: WD 1tb external harddrive, Logitech G25, Logitech mx 5500 (keyboard + mice)
OC: No
Operating System: Win7 64bit
Hi, i have a bit of problem after trying to flash my bios to E7681IMS.1J0 (v1.19).
I used the USB flash tool (mode 1), and used a archive posted on the forum. Everything seemed fine, "update completed succesfully", i shut down computer and cleared CMOS, went into bios and loaded optimized defaults.
In Bios I could see the updated Bios version. So in Bios everything was working fine. But after i saved my settings and tried booting into windows i only get to "windows starting", then blue screen and computer restarts. I tried to do another Cmos reset but it didnt work, and the same thing happend a couple of more times. Right now im in a loop where the computer starts for a couple of seconds and then restarts almost immediatly, so i cant go into BIOS.
Any help is appreciated!

Quote
EDIT:
Memory: Corsair 8GB (2x4096MB) CL9 1600Mhz XMS3 CMX8GX3M2A1600C9
When the computer was new i had problem with the XMP profile. The computer would randomly crash in games or when browsing the web, but never any problems during startup. I had to change DRAM Frequency to 1333MHZ, i keept DRAM Voltage at 1.65v. With the CMOS reset, the DRAM Voltage is set to about 1.48v and 1333MHZ.
EDIT2:
Changing DRAM voltage did not make a difference. Should i try to make the bios recovery: "How can I recover the BIOS on my MSI motherboard"?
no the problem is not in BIOS, you no need bios recovery.
Quote
After disconnecting CD/DVD and HDD i am now able to enter BIOS.
which one exactly? find the reason what cause you not to enter in bios setup
about OS you may need OS reinstall since you are flashing from very old BIOS version to the latest one with ME7
in some case it may need OS reinstall
assume if everything else is set right: SATA Mode , and no stability issues

P67A-GD55 - Random BSODs with varying codes

Similar Messages

Maybe you are looking for