P67A-GD65 - 4x sysfans, but only 2 are visible in BIOS

Hello everybody,
I'm new to this forum and to this motherboard.
I noticed that this motherboard has 4 SYSFAN conenctors, but only two are visible in BIOS or Control Center.
I don't know what's the speed nor I can't adjust it..
Is this normal or am I missing something?
Regards.

Quote
1V x 1A = 1W ? Is it really that simple?
Yes. P = V x I ---> http://en.wikipedia.org/wiki/Electric_power#Direct_current
Quote
In direct current resistive circuits, electrical power is calculated using Joule's law:
P = V I
where P is the electric power, V the potential difference, and I the electric current.
Quote
So in theory i can connect up to 5 fans? Is this correct?
Yes. Different fans, however will have different current ratings. There are fans out there which only draw about 0.1-0.12A. So, with such fans, you could theoretically install 8-10 (even though that would probably be pointless).
Quote
Jack, what do you mean by "the whole fan circuit"? All as in ALL? CPU and all the sysfan connectors?
Yes, all in all, CPU Fan + SysFan. At least as far as I am informed.

Similar Messages

24GB/1066MHz RAM installed, but 800MHz are visible only, why?

I have 24GB/1066MHz RAM installed, but 800MHz are visible only on my Mac Pro mid 2010, why?

That is a great question...
... for the vendor who sold you that RAM.
It has probably clocked-down because too many modules of incompatible types were installed.

I'm a new MAC user and I'm trying to transfer my iTunes music files to my Mac, however when I attach the external drive that contains the music files, they aren't visible on the MAC (but they are visible on my old PC). How do I get my music loaded?

I'm a new MAC user and I'm trying to transfer my iTunes music files to my Mac, however when I attach the external drive that contains the music files, the music files aren't visible on the MAC (but they are visible on my old PC). How do I get my music transferred? I have already exported the purchased music from the iTunes library, but I have thousands of songs from my private CD collection that I had previously loaded through iTunes.

Paragon Software has the most reliable NTFS driver for Mac
tips on importing and organizing, transferring from Windows etc
http://www.apple.com/support/itunes
http://www.ilounge.com

Master Page updated , but changes are visible only for that Page(site) alone ?

I updated v4.master in SharePoint designer to add a bread crum navigation control
<div class="BreadCrumbWrap s4-notdlg">
       <asp:SiteMapPath runat="server" SiteMapProvider="SPContentMapProvider" id="ContentMap"   CssClass="BreadCrumbStyle" PathSeparator=">">
       <CurrentNodeStyle CssClass="BreadCurrentNode" />
       <PathSeparatorStyle CssClass="BreadPathSeparator" />
        </asp:SiteMapPath>
      </div>
But the changes are visible only in that site. all other sites dont have bread crum control,
I added the bread crum in header section, and also in page layout section, but there is no change (bread crum navigation only visible in that site alone)
Why ?
I always thought master page edits will be visible in all sites of a site collection,
Am i going wrong some where (My site collection has about 30-35 sites, and new sites are created every now and then )
Please help
rn

If the publishing features are turned on then the master pages for all the sites in the site collection are pulled from the master page gallery of the root site. But if Publishing hasn't been enabled then each site uses the v4.master in its own master
page gallery. It sounds like you haven't enabled the Publishing Infrastructure site collection feature and Publishing Site Feature in the root site of your site collection.
Paul Stork SharePoint Server
MVP Senior Solutions Architect: BlueChip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Web page has two scroll section but only one visible. Do not want to clear saved passwords.

I am unable to browse the top section of my stock market webpage as the scroll bar has vanished after updating Firefox. It works in OK in Explorer. The techs suggested clearing my temporary internet files but I don't want to lose stored passwords.

After Forms 6i it is only possible to run the Forms web based. Inside the the Developer Suite you can find an OC4J which allows you to run the Forms locally on the Development PC.
There are setting in the formsweb.cfg which allows you to do some configuration. For instance the look and feel which is by default the green color. The size of your window which makes your current window smaller than your Form.
At your last question. Do you want the other user to make use of your Forms or make use of your database. If you want him to make use of your Forms, the other user could call the locally installed OC4J with the http-address. If you want the user to make use of the database, the other pc should have a installed client software or make use a tool like SQL Developer to connect over JDBC.

E63:Sync Outlook mail but only header visible

I manage to sync (active) with outlook on contacts, calendar and mail, but the mail pulls thro the header only. I know that some devices have settings to this effect but i have been unable to locate it on the E63. Or is it a setting in Outlook?
Please help!!

I have the same question, however, using an e61i, or an e66. Did you find a solution that would let you do this!?

[SOLVED] P67A-GD65 mainboard missing Intel RAID Rom after updating BIOS

I use 2 HDDs to build a RAID 0 array using Intel P67 RAID driver. I've just updated the BIOS to the 1.I version, and after that my computer can't boot up, showing the message "Missing Operating System". I booted into DOS and failed to read my hard disk, combining with that the Intel Matrix Storage Manager Option ROM didn't show up during the POST (which prompts me to press Ctrl-I to enter the RAID configuration before I updated the BIOS), I think it's the Intel RAID driver's problem. However, the Marvell RAID's prompt still shows, so the Marvell RAID should still work well. I encountered the same problem the last time I updated the BIOS, but I forgot how I got it well again... Please help. Thanks a lot!
I didn't noticed that my BIOS settings had been reset after I updated the BIOS, so I should manually changed the SATA mode to RAID. I was required to run a system recovery after I set the SATA mode back to RAID since the system failed to load, and Windows re-installed the USB3.0 driver after the first boot after the update (I don't know why this is). And the problem solved. Hope this is helpful to guys have similar problem as me.

Please post the full system specs.
>>Posting Guide<<

BIOS 4.2 P67A-GD65 flash failed and motherboard HS ?

Hi,
I just ruined my motherboard MSI thanks, I possesses a P67A-GD65 and I wanted to put the last bios 4.2, the pc is stable at 100%, not overclocked etc .... I run the flash freeze win7 64 and freeze .... Now this does not boot anymore when I turn on the pc it'm black screen, it goes off, it turns on black screen in a loop ....
is there a method to reflash the bios or is what it is .....
Service thank you in advance

Try what froggy said but frorm the sound of it, you bricked the board.
If after clearing the cmos et al, you cannot post you will need to either take it to a computer shop or return it to msi for a bios flashing. I think shipping costs a little more than the computer shop but it only takes a few minutes.

Msi P67A-GD65 keep restarting after bios update

Hello
I have a Msi P67A-GD65 B2 motherboard, I tried today to upgrade bios to version 4.2,after update pc start up showing marvel controller then MSI logo and then computer restart over and over,if I try to enter BIOS will show 'entering setup', and restart again.Dual BIOS led does not light up and is not blinking.What can I do in this situation? How to switch the motherboard BIOS to boot from the other one?

Quote
Can you verify that, I don't think they make a B2.
Not sure why the hijack in this thread with different hardware involved, but a B2 is a defective mainboard from the beginning, and should have been replaced at the time of the replacement offers over a year or so ago.
Quote
I understood that there was a backup BIOS so I felt confident to be able to fall back in some way. Can you help me using that backup?
The Ivy udpate flashes the secondary chip as well on the GD65, so it would do no good to have access to it unless you could get into the UEFI/BIOS somehow to 'enable' the Dual BIOS Auto Update setting to restore the corrupted primary.

P67a-gd65 (b3) bios 1.E not supported under windows 7 x64

I currently get the message that the 1.E bios for the p67-gd65 isn't compatible with my current version of windows 7 (64 bit). Is that normal? I don't see it mentioned on the msi site

do this:
Quote from: Svet on 11-June-11, 22:53:48
boot from the stick again, when you see to choice modes 1,2,3, hit [shift+f5],
then type efiflash bios.bin [ctrl+m]
Quote
Does it have something to do with the usb-stick?
nope, its some kind of compatiblity issue with this "p67a-gd65 (b3)" or at least to some specified bios version used

How can I view my messages in mail, I only can see incoming emails, but the the screen where the message must be visible is empty. Also attachements are nog visible. These messages are visible on my Iphone. thanks

How can I view my messages in mail, I only can see incoming emails, but the the screen where the message must be visible is empty. Also attachements are nog visible. These messages are visible on my Iphone. thanks

And attached is a screen grab showing selected e-mails in the Inbox...the white space below are e-mails too!

I have 302 events in my iPhoto but only 14 are visible. Any idea what has happen to the rest?

I have iPhoto 9.5.1
I went to go look for my photos from Venice and realized that all of my events were gone except my photo streams. On the left hand side in iPhoto it tells me that I have Events (302), but only 14 show up. Also tells me that I have iPhotos (1,485), which a lot of are not showing up. I am only able to view my photo streams.

What happened before this problem occurred? Have you moved your iPhoto library? Run any cleaning/duplicate remover apps? Shared the library with another account?
Have you checked, if the search field at the bottom of the iPhoto window is cleared? If this search field is not empty, fewer events and photos will show.

HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
Thanks

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

I accidently unmarked the book marks tool bar, the tool bar and the menu bar how do i get them back ?becaus now only the tabs are visible and i cant access my features or book marks

i was getting to know my firefox so i accidentally unmarked the menu bar the book marks tool bar and the tool bar. so now only my tabs are visible and i cant get to any of my add-ons or extensions.
and even surfing the net has become difficult cause there is almost nothing i can do with a new empty tab.
how can i get these bars back. i tried taking the cursor up to the thin line above the tabs and the window border but the menu to mark the above mentioned features does not appear any more.
i tried restarting firefox several times but it didn't work. i even uninstalled and completely downloaded a new version of firefox and installed it but the problem still persists.
i am operations system is windows XP.

Firefox 3.6+ versions have a feature to allow the user to hide the Menu bar.
Hit the '''Alt''' key to temporarily show the Menu bar, then open View > Toolbars and select Menu bar, so it has a check-mark. <br />
The F10 can also be used on most PC's to temporarily reveal the Menu bar.
https://support.mozilla.com/en-US/kb/Menu+bar+is+missing

No reports are visible in ConfigMgr 2012 R2 console but in visible in SSRS report manager

I'm installing ConfigMgr 2012 R2 with SQL server R2 SP2 in my lab environment. Everuthing went fine until i stumped upon a problem where the reports are not visible in Admin console but are visible in IE
I've gone through all the pre requisites and everything looks good.
The installation went fine and no errors in srsrpsetup.log and srsrpmsi.log
Reports are returning values while i'm running through IE
changed the AdminUIlog level to verbose and found the below error whenever i refresh the reporting node.
[44, PID:10712][12/20/2013 04:16:39] :Console query 'AllReports' started
[44, PID:10712][12/20/2013 04:16:39] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[12, PID:10712][12/20/2013 04:16:39] :Actions returned from cache for node 'msscnav://root/Windows/Wunderbar/ConsoleDisplay/MonitoringNode/MonitoringNodeOverview/ReportingRootNode/ReportsNode'.
Any ideas ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Thank you Garth, I can access the reports from other hosts as well.
Yes ,Newly created admins can see all the reports
I've gone through the event logs and nothing related to SSRS.
I dont think it's a FQDN issue, bcoz ican see in the logs the that the admin console successfully connected to reporting service. Only while retreiving the reports it throws error
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Discovered reporting services point - 'sccm.lab.local'.
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Root folder name is 'ConfigMgr_LAB'.
[12, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[10, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[12, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[20, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
and as you can see, it gives me "HTTP status 401: Unauthorized." instead "HTTP status Unnavailable".
Yes, i'm not a fan of accessing reports via console, but i dont want to leave an issue unresolved.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

P67A-GD65 - 4x sysfans, but only 2 are visible in BIOS

Similar Messages

Maybe you are looking for