P67A-GD65 problem with newest BIOS - no fan control settings.

After instaling newest version (V1.16) of BIOS I cant find fan control settings (2 chasis fans + % of cpu fan). Theres only smart cpu target temp. and nothing else.
is this some sort of bug, or MSI lost their minds?
Oh, and CPU phase LED's are blinking like mad (those were not blinking at all before).

Flash back to your previous BIOS and report your finding to MSI.
>>Use the MSI HQ Forum USB flasher<<
>>How to contact MSI.<<

Similar Messages

Re: [MSI Z87-GD65] Problem with MSIHQ BIOS Helper

Thanks for the response - I had already contacted the seller, and they directed me to MSI who have a special webpage for it (to get the number to take to Nvidia).
The MSI process for some reason wasn't accepting the number but they have responded to ...

Quote from: Svet on Today at 19:15:02FYI:
There is newer BIOS at MSI web page 1.C:
http://www.msi.com/support/mb/Z87-GD65-GAMING.html#down-bios
alright thank you!
Do i use the same steps to create bootab...

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

I'm having problem with my bios password. It tells me to enter current password 100-10250x

Having problem with my bios password.it tells me to enter current password 110-10250x

Place the iPod in recovery mode and restore via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Compatibility problem with macro media flash active control

I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista). How can this be fixed? why am I suddenly getting it now? I have the latest Adobe flash player installed.
Trisha

the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Problem with downgrading bios. MSI P67A-GD65 (B3).

Hi!
I'm having problems with downgrading my bios from version 4.3 to 1.19. I want to downgrade, because 4.3 doesn't want to boot when I use xmp settings for my RAM ( that might be related to my CPU since I have i5 2500k which is 32nm and 4.3 version of BIOS is recommended for 22nm processors ). When I try to flash with the MSI Forum HQ USB Flashing Tool I'm getting an error: "Rom file ROMID is not compatible with existing BIOS ROMID". I've ran out of ideas how to downgrade my bios so I'm asking you for help. My specs:
MOBO: MSI P67A-GD65 (B3)
CPU: INTEL CORE i5 2500K
RAM: G.SKILL RIPJAWS X 4GB (2x2GB) DDR3 1600MHZ CL6 (F3-12800CL6D-4GBXH)

Here you go. GD65 and GD55 usde the same BIOS files;
https://forum-en.msi.com/index.php?topic=179837.msg1295420#msg1295420

MSI P55-GD65 - Problem with automatic fan control.

Hello.
I wish to share story of my fan speed controller.
Lately I've upgraded my machine to modern specs (look at signature) and I was quite happy about that.
It worked flawlessly for about week.
My H/W Bios settings was - CPU Smart Fan Target = 60°C and minimal fan speed 50%.
I was amazed how nicely GD65 maintained between heat and speed.
Yesterday, I've noticed that my fan is really quiet all the time, even when gaming (before it accelerate speed while hardcore gaming settings). I was quite content about that, until my computer crashed due to overheating while playing Battleforge match.
After reboot I've ran Intel BurnTest and HWmonitor. OH my, what was my surprise when I saw that fan speed is always 50% and do not speeds up when cores are heating up!
I started to checking things out. What I've discovered:
-(CPU Smart Fan ON) Fan is always at minimal speed given in BIOS. It doesn't accelerate even if CPU is burning.
-(CPU Smart Fan ON) Fan speed cannot be controlled by any program (like SpeedFan).
-(CPU Smart Fan OFF = 100% fan speed) Fan speed CAN be controlled by program like SpeedFan, which saves me from fan buzzing.
I've try to fix that by:
-Checking cables.
-Clearing CMOS.
-Updating BIOS to 1.6.
-Praying.
And still nothing.
My conclusion:
Fan speed cannot be change when Smart Fan is on, it locks fan speed at minimal speed given in bios.
Now I just hoping that this is somehow stock fan fault, new Zalman CNPS 10X QUIET is in delivery.

No problem here with Target 55° and Speed 37.5%.
Fan runs at 1330 below 58° and 2050 above which is max.
The CPU is running at 3050 MHz because of XMP 'overclocking'
Have reverted to BIOS version 1.3, due to XMP problems with other versions.

Cant use usb keyboards on bootup on P67A-C43 with newest bios

I installed the latest bios for my P67A-C43 and found i couldn't access bios anymore so i plugged in an older ps3 keyboard and got into bios that way,i tried v 1.18 and 1.17 bios and both won't let me use a usb keyboard(tried 2 different usb keyboards)so i went back to bios 1.14 and got my usb keyboard working again in bios,anyone else have this problem with the newest bios and find fix for it?
I'm running a 2600k with 16gb of corsair vengeance ram.

Quote
The reason i flash is for compatibility issues
If an issue is noted, now that you have found the forum, before a flash, many times answers may point to something other than a UEFI/BIOS problem. Anyway, if you have the Intel ME driver, chipset driver, and USB Renesas 3.0 driver installed, there are no UEFI/BIOS settings other than enabling all the USB 'enable' options. In this situation, when a keyboard did work, and then didn't with a flash to a newer release UEFI/BIOS, MSI needs to be made aware of this so they can address it in an upcoming release. Again, if there are no compatibility issues experienced with an existing/older UEFI/BIOS version, there is no practical reason for flashing. It is not a driver.
If and when a flash is required, please use the forum's USB flasher found here at this link;
https://forum-en.msi.com/index.php?topic=108079.0
After a flash, it is also recommended to do a full battery removed CMOS clear and reset.

MSI p67a-gd65 dead after last bios update 4.0

hi, i read and execute exactly the bios update ver. 4.0 for MSI p67a-gd65, oll goes ok, update bios and ME successful , but after restart ... main board dead!!! i prove reset cmos ... nothing .... mainboard starts and work only 1 second, after that restart in an infinite loop with work 1 second and restart, i must disconnnect the power cable to stop that infinite reset!!
mainboard damage?

Quote from: Differentone on 02-June-12, 20:30:48
I think you failed at disconnect the power while in loop.
Because of was the same as me, infinite loop like 4~5 times and after continued to install.
Here for an explanation look at page 4 > http://event.msi.com/mb/22nm/Bios_ME7_to%20_ME8_update_SOP_EN.pdf
If you didnt seen this part, failed and.... I dont know what can you do at this point.
in fact the problem was after this last update mentioned on page 4 of SOP guide that you linked and that i was read ... all ... but what is strange is that i have no display error during all update .. alla goes fine ...after last reboot ... dead.
someone can tell us what's happened? i'm not newbie about this procedures of bios update ...without any problem.

Z77-GD65, problems with video signal

Got some problem: with external graphics card (ASUS GTX660-DC2TG-2GD5) the signal disappears after a while (about 1-3 minutes) - display goes off and has floating table "No signal".
Without external card, through the integrated video - all works fine.
Has anybode had this problem?
I had a BIOS like 10.0 and then updated it to the latest version ( 10.8 ) via M-FLASH, but nothing has changed.
My system:
. MSI Z77A-GD65 (RTL) LGA1155 < Z77> 3xPCI-E+Dsub+DVI+HDMI+GbLAN+1394 SATA RAID ATX 4DDR-III
. CPU Intel Core i7-3770 BOX 3.4 ГГц / 4core / SVGA HD Graphics 4000 / 1+8Mb / 77 Wt / 5 / LGA1155
. Corsair Vengeance < CMZ8GX3M2A2133C11R> DDR-III DIMM 8Gb KIT 2*4Gb < PC3-17000>
. ASUS GTX660-DC2TG-2GD5
. Corsair TX750 < CP-9020042-EU> 750W ATX (24+2x4+4x6 / 8pin)

Yes, the forum's USB method is the safest there is. That and the reflash will ensure the ME firmware has been updated properly. Yes, you do have a safety net with the B BIOS chip.
As a side note, you shouldn't have any graphics problems when W7 is installed like some have with W8.
Edit: Problem is you need an OS installed with the forum method.
2nd edit: Recommend then to run on the onboard ports to the monitor with the discrete card removed to get the OS, drivers, reflash, etc. taken care of. Then the matter of the graphics card not working right can be addressed.
3rd edit: Has the graphics card been tested in another machine to verify it is not possibly faulty?
4th edit: Sorry about all the edits, but as I think about it, more things come to mind. Have you been connecting the discrete card with HDMI or DVI? Some compatibility issue can be a possibility with a non compliant v1.4 HDMI cable or a monitor conflict. Some Apple monitors have been known to be problematic from time to time.

Msi P67A-GD65 keep restarting after bios update

Hello
I have a Msi P67A-GD65 B2 motherboard, I tried today to upgrade bios to version 4.2,after update pc start up showing marvel controller then MSI logo and then computer restart over and over,if I try to enter BIOS will show 'entering setup', and restart again.Dual BIOS led does not light up and is not blinking.What can I do in this situation? How to switch the motherboard BIOS to boot from the other one?

Quote
Can you verify that, I don't think they make a B2.
Not sure why the hijack in this thread with different hardware involved, but a B2 is a defective mainboard from the beginning, and should have been replaced at the time of the replacement offers over a year or so ago.
Quote
I understood that there was a backup BIOS so I felt confident to be able to fall back in some way. Can you help me using that backup?
The Ivy udpate flashes the secondary chip as well on the GD65, so it would do no good to have access to it unless you could get into the UEFI/BIOS somehow to 'enable' the Dual BIOS Auto Update setting to restore the corrupted primary.

P67a gd55 problem with a new gpu

Hi!
I just upgraded to an hd7970. Now I don't get any signal at all to my screen. Not even bios is loading. I've made sure everything is properly in place and connected on 8-pin and one 6-pin pci-express cable. When I plug in old gpu it works again. When I plug in the new card the fans start as usual at startup. I got a thermaltake tough power 750w psu. I've tried to rule it out to three things that can be wrong.
1. Gpu was dead on arrival.
2. My psu is too weak to fully drive the new gpu.
3. My motherboard won't recognize the new gpu.
I recently had problems with trying to flash bios with live update and had to flash back to version 1c.

Quote from: badboy2k on 15-December-12, 20:57:09
ok your psu has 4 +12V rails (+12v1 = 18A, +12v2 = 18A, +12v3 = 18A, +12v4 = 18A) meaning its very spread out!
only thing i can really suggest you do is see if a friend with a relativly good computer will let you try it in ther rig if they have a 600W or better psu in it to see if it works there!
even very old bios versions should see it unless your card is flashed with a GOP VBIOS for use with windows 8 but they usually state that on the box!
Okay, so if i used one of the original PCI-e and one through molex it should have been as good as it gets from my PSU?
This is a thread i started a while ago and got help with flashing back my Motherboard. Maybe it will give you some clues to what is wrong if it's not the PSU.
https://forum-en.msi.com/index.php?topic=164109.0

Problem with updating bios toshiba satellite l655-s5144

Hello first of all having a good day, four months ago a problem with my laptop toshiba satellite l655-5144 I have something crazy ,happens that when starting Windows 7/8 freezes there and I can not access windows, I thought it was an error of hdd, but I think I'm surprised that it is not, since changing the hdd and still gives the same problem of being paralyzed in Home windows, all this began to update the BIOS to version 2.8 that turned out to be the operating profit that was for windows 8, not sure if this is due to the problem but I've tested the ram, hdd, cpu, etc and everything about the hardware works well and gives no problems, I think that the problem was caused by updating the BIOS to version 2.8, my question is whether you can return to the factory version was 2.2, or at least the previous version to 2.8 which was the one I worked thanks for your answers and spend time helping me, is the agradesco much.
And sorry for my bad English.
Solved!
Go to Solution.

Hello and thank you for coming to see the problem I had with my laptop, that seems to fix the problem so far, I hope q not refreeze operating system again, and I could restore the BIOS to version in which was when purchased.
If anyone has the same problem as I leave then follow these steps:
1.Find BIOS version with which acquired the laptop
2. Use of mnetodo booted by CD.
3. Insert the CD from the boot.
4. Upon resumption of the program ran hidden PC (that I saw no message)
5. After restart, windows restart again and enter the bios to see if it had changed the version of this and it turned out was successful.
Well I hope this problem the laptop again, and thank you for deigning to read at least my problem.
Satellite l655-s5144

MOVED: Big problem with the bios

This topic has been moved to BIOS.
Big problem with the bios

You're not alone... https://discussions.apple.com/thread/3391947?tstart=0

P67A-GD65 problem with newest BIOS - no fan control settings.

Similar Messages

Maybe you are looking for