P6N SLI Platinum, audio driver update gives "No Driver was supported..."

I have the audio driver from the CD that came with the mobo, but I wanted to update it to the new version. Currently I have R1.67 2.32, I tried to install the driver (R1.83 2.51) from http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140 but get the message "No Driver was supported in this driver package".
Also, I went to the Realtek site and got their even newer driver R1.84 but it asked me to remove the previous driver first, I'd rather check with the boards first to see what is going on.
P6N SLI Platinum
BIOS 1.4
Realtek Audio onboard

Could you please point me to where I can locate Live BIOS, first I hear of it. Thanks for the input btw.
Another off topic question. Does the Dual Core Center work ok with Vista x64? Wondering just in case before I get to using it. On my first Vista install is seemed to work, 2nd format it would come up with 2 error messages and not start:
"Error! unable to load ntuneoem.dll" and "Failed to load overclocking driver! This program must run as an administrator."
I have ntune installed on my 2nd format (which I found out doesn't work in Vista 64 properly) but cannot uninstall it from Add/Remove. A wizard window comes up and closes in the same seconds when I click uninstall. Tried to uninstall using the MSI CD which with I loaded it, still gives an error (tried to google the error msg but the msg is extremely rare and doesn't point to the problem). Going to have to manually remove it it seems and hope I get it all.

Similar Messages

P6N SLi platinum supports some yorkfields

Just in for the P6N SLi platinum users:
The Yorkfield Q9300 and Q9450 are supported on the mainbord with the current BIOS, 1.5 as well as the wolfdale E8190, E8200 and E8500
The Q9450 and E8400 are still under testing.
Look here:
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1140&maincat_no=1&cat2_no=170&cat3_no=#menu
Great news, altough the QX doesn't work, you now can still buy a new quad with nice speeds

When I read the site today it says than none of the 45nm CPU's such as the Q9300, 9450 etc are supported. Am I misreading this? In a separate thread I mentioned my dilemma. I have the P6NSLi Plat board and need a quad core CPU to run the application I need it for (golf simulator). Any options? Also need a Geforce GTX 285 or 295 card. That should work, correct?
Jeff

P6N Sli Platinum front audio panel and CPU temp voltage issues

Hi All,
I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
Any reply will be appreciated.
Cheers

Quote
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures. Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ). This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor. It is rather the MSI tool that does not read the data it provides correctly.
Quote
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
There is no issue. What CPU-Z allows you to see there is the C1E-feature of your CPU at work. When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down. As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically. It is meant to be a good thing.
I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle.
If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere. You may be able to hit "F4" to unhide it.
The MSI utilities are not the best tools to monitor your system. CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

P6N SLI Platinum Bios update in Vista x64

Just wondering how I update the bios for my P6N SLI Platinum in Vista x64? When I d/l the bios all the stuff is for 2000/me/xp. Why is there no vista support under anything?

Use the USB flashing tool developed here at the forums.
clickme>>MSI Forum HQ USB flashing tool!!!<<clickme

P6N SLI Platinum mobo with hard drive/sata crashes

i've experienced a (now recurring) problem with my hardware over the past several months. i've come home from work twice now, once about 2 months ago, the other just today to find my computer stuck at the windows xp loading screen. if i tried to reboot the system, it would hang at that point, until i disconnected the offending drive/sata channel (i had 3 hard drives in my system, 1 150gb drive with operating system, ect, and 2 500gb drives for storage (mp3s, video, ect). i've narrowed the problem down to either the motherboard or the sata cables (i don't have spare cables to test with), as the hard drives work perfectly in an external usb enclosure. any ideas of what could be wrong?
basic system stats:
msi P6N SLI platinum motherboard
intel core 2 duo E6600 2.4ghz processor
crucial ballistix DDR2 800 (PC2 6400) 2 gb SDRAM
EVGA GeForce 8800 GTS video card
western digital raptor 150gb 10k rpm SATA hard drive
western digital caviar 500gb 7200 rpm SATA hard drive
PC Power and Cooling Silencer 750w power supply

in brief,
1- if you have one memory it should be in slot 1, closest to cpu, if two X 1Gb then they should be in one and three.
2- do you know what is virtual memory if so have you made adjustment or not.
3- you have freeze due to wrong bios setting till we get a good picture of your bios difficult to pin point the mistake, so use either a digi cam or web cam and take shoots of your bios then we can pin point the mistakes

P6N SLI PLATINUM CMOS BAD CHECKSUM ERROR TIME DATE

I have the same problem. It’s driving me crazy. Here is my specs:
MSI P6N SLI Platinum LGA 775
Intel Core 2 Duo E6420 2.13GHz 4M shared L2 Cache
Foxconn GeForce 7900GS 256MB 256-bit GDDR3 PCI Express x16
Western Digital Caviar SE16 WD7500AAKS 750GB 7200 RPM
Kingston KHX6400D2LLK2/2G 2GB kit PC2-6400 800MHZ
LG DVD GSA-H50N DVD-R 18X
Matsu"I'm a potty mouth"a Floppy drive
Windows XP 32-Bit
CoolerMaster RP-500-PCAR – 500W
+3.3V +5V +12V1 +12V2 -5V -12V +5VSB
20A 20A 16A 16A 0.8A 0.8A 2.0A
Sometimes the computer boots ok, and everything works great.
Sometimes it just doesn’t boot, it just gives a blank screen. So, I press reset and the post gives the CMOS CHECKSUM BAD. F1 to setup F2 to default.
If I go to the setup everything is just like I left, including the time. Even if I setup the bios with default configuration, the problem continues.
Here is a list of everything I have tried
1) Replaced the battery 2 times. I checked with a multimeter. It’s 3V allright
2) Disconnected everything leaving only 1GB memory and the graphics card
3) Updated the bios version several times, to make sure I did it ok. I cleared the CMOS after allright
4) I read every post in this forum about bios and P6N SLI Platinum
5) Already checked the D-BRACKET. It shows 4 green leds when the screen is blank
6) Already checked fans: CPU and graphics fans works ok
7) Already tested with memtest86+ V2.01
8) Already upped the northbridge to 1.325V, CPU 3 notches and the memory another 3 notches.
So anyone has any ideas, or I’ll just have to go to a computer store and swap the graphics or the PSU and try to see if the problem vanishes??? It’s gonna be tough… they don’t like to let you test the merchandise….
PS: Thanks for all the help so far that you have been giving to TheGimp, after all, we have the same problem…

I had the same problem after ~8months of trouble free service; it was intermittent too. sometimes it would boot fine, others times i'd get the error message. I removed the battery to test it. it was fine. i cleared the cmos with the button while the battery was removed. i noticed that the battery holder seems not to be anchored to the board at all. I haven't confirmed this but it looks like the protruding metal clip holds it all together. i had contacted MSI support about the problem earlier. they told me to clear the cmos. i asked about the battery holder not being secure on the board, and, as in the typical support response to an unusual question, they gave me some vague, undecipherable response. So, anyway when i put the battery back in, i felt the holder kind of click into place. I haven't had any problems since.

[P6N SLI Platinum] black screen NO BOOT after D-bracket replug [RMA-SOLVED]

Quick setup specs;
P6N SLI Platinum
E6600 (box/stock 2400mhz basic)
2x 1Gb DDR2 6400 Gskill HZ
Sapphire ATI X1600Pro (PCI-e basic)
Aerocool Zero DBA 620W
(2 HDs sata, 2 Hds pata, 2 optical pata at first -all OK at first, disconnected after, so irrelevant here ,( )
(XP Pro clean new install from start)
I tried to check the forum old posts before trying to write that new one, but could not find any really related totally adequate posts so far (or i missed them, sorry if so, then -?). I could already find very useful informations on first aid usual 'rebooting' procedures to follow with minimum new boot configurations, d-bracket new LED signals etc. But so far no luck, all same, nothing better, nothing cured here for the stuation here. ,(( Also excuse my english if not perfect, i am not english either. ,(
VERY bad & sad problem here... ,(((( :
All was working perfectly great during 5 days.. the P6N SLI platinum install went GREAT initially (as normal, not a first pc built, all normally happening, so far so good, etc).... all hardwares compatible together at first (dedicated ATX 'full' 8x8 pins connector too for the cpu only for ex -all working perfect at first try. quick tensions 5V/12V under msi dual core control tool perfect too etc), was great easy going/ great strong ultra-stability feeling on the hardware side.. i was just now concentrating on the software side (no special BIOS tweaks even attempted so far, all on basics-normal e6600/ddr2 auto-settings, apart at the end ddr2 quick test -when problem occured- on 450(900?)Mhz at 2.1V, far far easy under its possible specs max anyway.. and had been working perfect for 3 days with that little ddr2 boost try -no time for special bios further tweakings now, etc), reinstalling and transfering/reorganizing slowly my necessary files/hds/softwares from old to new setup, no oc, nothing special tempted (i was planning oc, new cpu more suited fan/silver6 etc only for the end..), LAN file sharing setup done, Realtek audio setup test done, etc ; installation had been so far one of the quickest and problem free ever... explaining maybe also my fatal lack of cautioun for just (too much) 3 sec in the end after 5/- days of perfect working new ring going on.. ,((( :
At first, i also tried to immediately install the D-Bracket too to check possible hardware install problems -very useful feature i of course thought too..and wanted to try too, "in case of"..- (installing it from quick reading of the printed manual..with no colour pic coding inside..and quick error coming from there thereafter with an initial mismatch usb/jbd1 inverted plugs connections.. *both* having the exact same pins numbers and dispositions, beeing side by side on mainboard layout.. and so able to connect both headers indifferently.. so i did not see it immediately (( .. and no way to see it otherwise as such, anyway.. ,( ), just to be sure all was ok. I noticed that LED were of course, never lightning (not normal).. but as EVERYTHING else was working fine (GLAN, sound, etc etc).. i did not bother more than that -- error checking not necessary.
Till that fatal clumsy day i wanted suddenly to.. check the D-bracket too. ((((
All was working well, XP pro opened for hours as usual etc..
i had not yet totally finished to install the motherboard in the pc-case (always on desk, free in sight..)... so i could always see the connections on it. ... and i noticed that ... the colour headers codes were NOT matching (usb=yellow..).. i had just stupidly initially badly connected the D-Bracket jdb1/usb adjacent plugs (inverting them), so... And still, all had ever worked perfect.. except the D-Bracket, of course, was sending back no lights then, obviously.. so i did the fatal error.. confident all was stable enough and strong if even that initial plug error had had no consequences at all.. i did the fatal bad move to try to UNPLUG the D-Bracket connectors and put them back in right orders WITHOUT switching OFF the power supply so... like an hot USB plug, sort of, in a way. fatal error.. :( :( :(
As soon as i began to remove the usb/jdb1 connectors and put them back in normal order... the system suddenly SHUT DOWN ... no special bad noise, no special smell.. just sudden SHUT DOWN.
From there.. impossible ever to boot back again the so far perfectly working machine (((((((((((( , always same till now :
i switch on the power supply.. orange led appears on motherboard (ok)... i switch on the motherboard.. green led on motherboard appears (ok)... CPU fan begins (ok), video fan begins (ok) .... and... NOTHING.. total black video screen. no more even possibility to see the BIOS. :( total dead startup .. and the fans are going on eternally, blocked eternally in that inital startup with leds on too (no sudden shut down after a few seconds.. just.. nothing)... :(
Suprem irony.. the D-bracket LED seems to 'work' now.. "of course". Just the PC no more booting at all ^. Only thing is that only green LEDs are appearing, no red ones... simply the sequence, from start and never changing :
1. GREEN 2. GREEN
3. GREEN 4. (---) (not red, just nothing -?)
If i look in manual, it means "Testing RTC (real time clock)". I don't know exactly what it means *here*, but sounds to me it is the most basic initial first BIOS checking.. and BIOS can't be reached for even that so ; BIOS fried???? :( :(
I tried every 'standard' things recommanded usually here in older posts, for new boots recovery attempts thereafter in such 'boot errors' situations (clear cmos button pushed in every possible ways -quick, long, quick etc..-, removing little by little everything but the very minimal least energy taxing setup; keyboard, cpu, video, motherboard; 1 ddr2 nearest cpu slot.. point).. NOTHING. Worst, i tried to boot with one of those elements missing.. exact same D-Bracket lightning from start to.. eternally (123 GREEN 4-nothing). Even tried to remove the little (cmos?) KTS lithium battery for a few hours -that could work sometimes with the old already ultra-sensitive amd/nforce2 chipset bioses problems, so i tried there too-?-; same 3 green lights and fans running and nothing else happening from there.. ((
Always the same; total dead boot as above. black screen. no possible access to even bios panel. ,(((
So my desperate questions, now: of course, the origin is obvious here; all happened "by my fault" when i tried 'too quickly' to 'hot-plugging' replace correctly the D-BRACKET plugs *without* switching off the power supply... all shut down suddenly when i put back correctly the usb& jdb1 headers... :( ;
- do you think there could be any possible last HOPES to recover the situation that i had missed (a well known situation in such d-bracket handling 'common' (?) connection error, a simple trick to try i had missed ??)
- do you think i FRIED something in the process on the motherboard ?? :( :(
- do you think it is 'only' the BIOS (fried????) ?? :( :(
- do you think i could have fried a specifical external key component in the process (not necessarily motherboard) : ddr2 modules, cpu, video card????? :( :(
- is my only solution is to send the motherboard to RMA (no other ways now) ???
please, don't hesitate to give me any possible hints to try to avoid the RMA process.
can i avoid it, right now?
is that possible to fry an whole board just with such a D-Bracket 'hot plug switch' (on a so far perfectly working -light- setup - no oc, little video card, etc) ???? :( :(
That is the only C2D Intel/ddr2 motherboard i have here around. No possibility to test elements by elements for precise error checking (cpu, ddr2 modules, video card or powersupply).
Only things i could check so far are;
- the power supply (aerocool 620W zeroDBA) ;
i tested it back on my old amd xp-m nforce2 setup.. always working apparently. NOT 'fried' so, apparently. but no way of course to test for exemple the special 8x8 (or 8x4) Intel ATX cpu connector on old xp-m motherboard. But power supply NOt fried at least, apparently -?
- the video card.
no way for me to really test the pci-e card on other motherboard around but.. i tried a very old PCI VGA card.. that one works on old setup.. and on P6N, no effect, doesn't improve the situation. So, not sure the new pci-e video card isn't fried.. but a new video card doesn't correct the dead boot problem.. (
No way for me to test the ddr2 or CPU directly though.
Do you think DDR2 or CPU could have been fried in the process too ???
or just, as i fear anyway, 'simply', the motherboard BIOS fried -??? :-(
Really, thx for any suggestions..
if there could be an 'hidden' trick i did not try yet to try to recover the (initially working perfectly!!! (( ) setup, WITHOUT engaging the motherboard RMA process (at least 2 or 3 weeks lost here to wait the return..online store etc..)....
please, suggest me.. ,((
i am *really* very sad of that stupid clumsy idea to want to 'enable' the D-Bracket.. all was working great so far.. and i lost all with just that stupid idea to try an hot plug bracket reconnection without switching off the power supply it seems.. can it be possible,sigh?? all seemed so stable before that, that i.. just lost my usual cautious just 3 sec too long it seems... :-(
Thanks in advance
hoping post not too long too, but i tried to expose the situation as precisely as possible; first time i ever had such a problem with a motherboard/system install.. that is quiet ironical knowing it was also the best and quickest/easiest easy going new built i ever had so far too.. till then ,( .. and all came from the 'helper' d-bracket 'luxury second hand possible boot helper diagnostic tool' checking in the end too, here.. really hoping i can avoid an RMA process.. and no other hardware elements (apart the motherboard?) could have been damaged in the process ? ,(((

hi, thx a lot for the quick answer. sorry for the length indeed (i did not know exactly how to describe the situation.. without omitting any later possibly important details).
Alas, i already tried that many times in following interesting asnwers on similar problems in old posts here; did NOTHING. ,(
But after your post, i tried it again, and removed for the remaining *hours* (6/8h?) the cmos battery as suggested again *too* so -pushed again the clear cmos button etc when battery out, then when in again, then replugging the powersupply etc; NOTHING better alas too. always same, no boot, black screen, no bios. ,(
Problem always the same, to sum up, for clarity:
power supply on => orange motherboard led is lightning up, motherboard on => green motherboard led is lightning up, cpu/video/case fans are working up as normal and.. that's all. nothing else forever. black screen. no signal. not a single chance to get again the bios setup screen.
another detail i omitted, maybe; keyboard lights are all lightnng up too.. and stay blocked in that state too. tested with 2 different keyboards, same. to shut down the leds, fans etc, only one solution, shut down the power supply button directly, at that stage.
right now, i test on barebone minimal system as recommanded too;
cpu, 1 dimm (closest cpu slot), video, keyboard. all rest disconnected.
i of course tried to reset the cmos with the 'magical red button' many times before, with power supply cable plugged out, pushed the button trying almost every possible way so far (quick, long, long sequences, short sequences etc etc)... changed NOTHING so far -is that thing working?? ,(. and right now, same after hours with cmos battery removed too. ,(
the d-bracket leds are always (now it is correctly plugged..) :
123 GREEN 4 (nothing)
"Testing RTC (real time clock)"
another 'interesting' detail is that; those leds are appearing IMMEDIATELY after the motherboard is switched on, from start (green led appearing on P6N). and it is staying as such till the end. nothing else. i tried to connect also the case speaker ; no bips, no sound signals at all too.
I also remind the system was WORKING like a dream during 5 days *before* i had that sudden TOTAL boot problem.... AND i touched almost nothing in the bios too all along, for initial security reasons too.. (i was concentrating on the software installs anyway right now, NOT on the oc side..). The ddr2 quick little change i did was also the ONLY change i tempted to simply test quickly some setting i already saw working without problem with that P6N and that kind of ram.. and it was working without problem so far too, so.. all the time idem. And it had been perfectly working for 3 days as such untouched from there; no problems at all (those memory modules have been seen on that motherboard largely at those specs, why i did that quick test anyway.. far under their possible max -micron chips). it was even working so well i forgot to put the setting back as default after that quick ram test.. so much it was stable too (even if i had not time to do real memtest test on that one - i did for many hours with the initial automatical default settings too, to check the ram quality, was perfect for many hours, so ok too, no bad ram initially too-; was so stable for all my XP software installs operations etc.. that i forgot it thereafter, to be true..why it stayed like that till that moment (incidently).. but i preferred to mention it 'just in case' though, yes. i also did not push at all the dimm voltages in the process, it was always far inside the specs at 2.05V to be exact -usual for that ram too up to those numbers easy for it. i did not push the ram voltages either so..).
The problem ONLY appears when i wanted to unplug the *initially* badly connected D-bracket headers so (inverted headers.. but that caused NO problems either so far too for the system stability.. only the LEDs were of course not working so far..) : i did the error to NOT switch off the power supply. :(
*then* immediately the system shut down... and above situation appeared. ,(
BUT all was working perfect before.. ram setting included so. ,((
So my simple questions now too ;
- do you know what means *exactly* the d-bracket message 'Testing RTC" (123 GREEN, 4 nothing).. initial bios problem, isn't it?? other ways to recover it now?? ,((
- is it a WELL KNOWN PROBLEM when we try to disconnect and replug too hastily the d-bracket headers without switching off the power supply (*my* main erorr here, it seems :( :( ) ????
... and of course, do you think it could have *fried* another key component (cpu, ram -?? why i reminded the setting, just in case-?-, video card? .. ) with that d-bracket initial disconnection error ... ,(
as i said, i have no secondary c2d/ddr2 motherboard here : no way to test the cpu and ddr2 modules on another motherboard to be sure too here. :( i absolutely can't know if they have been damaged or not, here.. :( :(
any other idea for the motherboard itself though ??? ,(
once again, thx a lot for any suggestions and precisions on that problem (is that a COMMON well known problem with the d-bracket, when we unplug and replug it without extrem care like i did -my main inattention error it seems.. mainly because all was so stable before too.. ((( - without shutting down the power supply/system FIRST ???? can it be possible 'only' that shut down all the system??? (( )
thx in advance again +

P6n sli platinum + e4300 oc

I've read tons of posts on forums, but most just give FSB speeds, not actual numbers to use in setting the system clock, so how do we know what to use actually?
When do you use the 1:1 ratio? or any of the others if your motherboard BIOS doesn't let you manually set your memory multiplier?
I have the updated BIOS from MSI LiveUpdater and Web
I've Disabled the following in BIOS
Execute Bit Disable
Set Limit CPUID MaxVal to 3
HPET
CPU Smart FAN Target
D.O.T. Control
Intel EIST
All Spread Spectrum including:
CPU Spread Spectrum
PCIE Spread Spectrum
CPU/LDT Spread Spectrum
SATA Spread Spectrum
Questions
System Clock-Auto,Linked,Manual
Which is best and when to use for what?
I went to 1333 for a steady 3.0ghz overclock. Temps were below 40C
at idle and were 65C under full load.
Adjust CPU Ratio-To what?
Stock shows 9, but can go from 6-9 as well.
Last night I got to FSB1600
Mem 800
with 8x multiplier
very fast, but lost settings on re-boot. So basically unstable.
CPU Voltage-Try to not increase this by first overclocking as much as I
can on stock voltage, but if it becomes unstable or won't boot, I just increase it how I see fit based on stability right? I just want a good bootable computer to use daily for about 3 hours and 48hrs on weekends.
Not too much into games yet, but will once I get speakers and a better monitor. Mostly business/student needs.
Memory Voltage-Stock is: Timing 5-5-5-15
Voltage 1.8 - 2.0
I got this to 2.2 and everything was fine.
I can manually set it to 4-4-4-12 1T as well.
NB Voltage-I got this as high as I could and it worked great, I think it was 1.7.I heard on forums that the higher you go the better for overclocking. Plus it's got a fan on it stock and I don't care about noise fan at all.
SB Voltage-I got this to 1.6 and it was fine too. But it's not cooled so how much is too much?
FSB VTT Voltage-I read that if you go to 20% it stabilizes your rig when
you overclock, so I set it and it worked great.
My Setup
Intel Core 2 Duo E4300 Allendale 1.8GHz
ZALMAN CNPS9500 LED 92mm 2 Ball Cooling Fan with Heatsink
Arctic Silver 5 Thermal Compound
MSI P6N SLI Platinum 650i
G.SKILL 2GB (2 x 1GB) DDR2 800 (PC2 6400) Dual Channel
COOLER MASTER Centurion 5 CAC-T05 Case
Thermaltake TR2 ATX 430W
EVGA GeForce 8600GT 256MB GDDR3 PCI Express x16 Video Card
Western Digital Caviar SE 160GB 7200 RPM SATA 3.0Gb
$700 exactly with shipping from NEWEGG
PURE BUDGET BUILD

Hello welcome to the forum,
Quote
System Clock-Auto,Linked,Manual
Which is best and when to use for what?
I went to 1333 for a steady 3.0ghz overclock. Temps were below 40C
at idle and were 65C under full load.
System clock I believe is how the memory freq is generated. "Auto" would be automatic, "Linked" would be linked to FSB speed, "Manual" wold be manually setting the speed.
65c on the cores or the CPU? Because if it's the cores, drop down, anywhere over 60c and your CPU may start skipping cycles.
Quote
Adjust CPU Ratio-To what?
Stock shows 9, but can go from 6-9 as well.
Last night I got to FSB1600
Mem 800
with 8x multiplier
very fast, but lost settings on re-boot. So basically unstable.
CPU ratio is the multiplier in which you times the FSB speed to generate/set the CPU clock. E.g:
Code: [Select]
FSB of 100x10 (cpu ratio) = 1000MHz CPU core speed.
Quote
CPU Voltage-Try to not increase this by first overclocking as much as I
can on stock voltage, but if it becomes unstable or won't boot, I just increase it how I see fit based on stability right? I just want a good bootable computer to use daily for about 3 hours and 48hrs on weekends.
Not too much into games yet, but will once I get speakers and a better monitor. Mostly business/student needs.
yes only increase for stability, never increase because you think you may need too.
Quote
Memory Voltage-Stock is: Timing 5-5-5-15
Voltage 1.8 - 2.0
I got this to 2.2 and everything was fine.
I can manually set it to 4-4-4-12 1T as well.
They are fine, just don't go over 2.3v, your RAM chips will start to fry otherwise.
Quote
NB Voltage-I got this as high as I could and it worked great, I think it was 1.7.I heard on forums that the higher you go the better for overclocking. Plus it's got a fan on it stock and I don't care about noise fan at all.
No, wrong way to do it. Do it like CPU VCore, only increase when stability is needed. Also monitor temperatures of NB as much as your CPU. Fan speeds don't bother me either, but temps do! Watch them at all times when overclocking.
Quote
SB Voltage-I got this to 1.6 and it was fine too. But it's not cooled so how much is too much?
Only increase if you need to, the SB core is usually the last voltage that needs increasing.
Quote
FSB VTT Voltage-I read that if you go to 20% it stabilizes your rig when
you overclock, so I set it and it worked great.
It's the voltage you supply to the FSB bus, too much and you will kill the FSB and your mainboard will be a fancy paper weight. Only increase when stability is needed, just like every other voltage.

P6n sli platinum cannot boot up

Hello
Everytime I boot up the D bracket suggests the computer is failing on initializing the floppy drive controller. i have changed the cable, and changed the floppy drive but same effect.
In the BIOS, if I go through and F10 for no save and exit, it then exits to bank screen as it fails at the point above. If i make any changes in the BIOS, and then try to accept those changes it freezes on pressing either Y or enter. At that point all I can do is turn off and start again. Naturally it doen't retain those changes. I have done this several times to disable the floppy.
I have removed the battery and put it back, (It's 16 months old). It then did allow me to disable floppy but still machine did not go beyond the above point. Whenever I have tried to go back into the Bios again, it will now freeze when I try and accept any change in settings.
As you will see I am unable to even boot from a floppy at this point so cannot een consider updating the BIOS. However before yesterday it has been working perfectly.
Any suggestions, or the loan of an axe to reprogramme the ****** thing would be much appriecated.
Thank you
Malcolm
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago

Quote from: yokochanie on 03-October-08, 13:55:28
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago
"2 memory sticks, 2 gb ram"
That doesn't talk much, we need full details about it.
"Intel Core 2 Duo Processor"
Which one?
"2.20.0050.10 BIOS verison"
That's not your BIOS version, look here how to check==> https://forum-en.msi.com/index.php?topic=113146.0
What VGA you use?
Remove power cord from the PSU and leave just one memory stick in 1st DIMM, once done proceed with >>Clear CMOS Guide<<
Then try to boot, if no change disconnect any storages{4 HDD's, 3 Optical drives, and any USB devices which you may have attached} and re-test.

P6N SLI Platinum – endless reboot loop. Need help!

P6N SLI Platinum – endless reboot loop. Need help!
Configuration;
Windows XP Pro, SP-2
On old hard drive (Maxtor) I installed in the new case
OCZ GameXStream OCZ700GXSSLI ATX12V 700W Power Supply
MSI P6N SLI Platinum
EVGA 256-P2-N550-T2 7600GT
INTEL Dual Core E4400
MEMORY tried two different ones;
GeIL Esoteria 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
Kingston Value Ram 1GB 667MH (of course tried in different slots, stick @ time)
NEC DVD player/burner
Old Maxtor IDE drive W/OS (I have new Seagate serial but won’t install it until I get everything else running.
Computer goes in an endless reboot cycle. First, showing a black screen with small parallel white hash marks. Can pull up Bios but that’s as far as I can go. At first, I thought the high end Geil memory might be at fault. But after installing the more generic Kingston I get the same looping.
In Bios, it is reading all my hardware; CPU, memory, hard drives, temperatures, voltages, etc. the only thing it doesn’t specifically show is the Evga video card. I don’t know if there is really any place it would show except in Hardware Profile.
One other thing, Bios is showing the NEC as the Primary IDE Master and the Maxtor as the Secondary IDE master (although I have tried it both ways). I generally like to boot first from my DVD then go to hard drive.
I don’t know where to go from here. Can anyone give me some suggestions?
Thanks,
Clickman

two replies;
To Vernonion
With JUST new Sata drive & DVD I get message "Reboot & select proper boot device or insert boot media in selected boot device & press a key" in other words, install windows. No flashing anything.
To Maesus
Yes, have tried boot sequence every which way . DVD functions as I ran Memtest for 4 hours last night.
I think I will use the information mentioned in the 3 links V gave me earlier to "repair" the OS on my old Maxtor drive. It is partitioned with OS in one area by itself, docs in another partition, programs another, etc. so I wouldn't lose any work. At worst, I might have to reinstall some programs. At best, I accomplish what I set out to do.
Many thanks,
Clickman

P6n SLI PLATINUM bios v1.2

So I upgraded to 4gb ram finally, and have got it to work without errors in dimm slots 2 and 4, and have been having performance issues such as slow loading, stuttering in games, and just in general slowdown with loading up applications, but absolutely no crashes or freezes of any kind, no BSODs or anything else that would be hardware related I assume.
Defragged, fresh install of windows 7, video card drivers updated and everything else checks out fine. The only thing I can think of is that over in HardForum doing a google search brought me to this post:http://www.hardforum.com/showthread.php?t=1164174 with issues related to 4gb on the mainboard having slowdowns with older bios versions.
Seeing as how this is relevant to me getting new memory, my patriot memory gave out with BSODs so I was forced to upgrade but had way better performance with just 2gb stick of ram (even in win7).
Should I do a bios update?
Specs:
EVGA 8800gts 540mb 195.62 driver
4gb A-Data ram 5-5-5-12 2t clock, 1.9v
Windows 7 64-bit
Bios v1.2 A7350NMS P6N SLI Platinum Socket LGA-775
Core2duo E6600 @2.4ghz
I haven't really done much upgrading since I purchased this a few years back, and quite surprised to see the hit and stuttering in performance in games all of a sudden after upgrading to new ram, and the ram tested out fine for 3 days straight doing multiple passes with memtest 4.0. I tried doing it in DIMM slots 1 and 3 but have been getting errors, maybe I've got a bad board?
Quite confused as to what step I need to take next, thanks for any help!

Quote
Should I do a bios update?
Yes. >>Use the MSI HQ Forum USB flasher<<

MSI P6N SLI PLATINUM no printer

Hello all, I am hoping this is a simple fix. I just bought this board and I love it so far, I am however having trouble with my printer.
I have not been able to get it to print
System info...
MSI P6N SLI PLATINUM Bios updated to Version 1.30
CORE 2 DUO E6420 2.13G (1066Mhz)
CRUCIAL 2GB DDR2 667 (1GB x 2)
GIGABYTE GV-NX85T512HP GeForce 8500GT 512MB
EAGLE VIPER ATX MID TOWER W/500W POWER
Windows XP SP2
I have...
been in the bios and can't find the port settings
run the Windows troubleshooter
Printer port doesn't show up in the system info and when I install a new printer port it lists it as LPT3 but not working.
Any help you can give me would be great.
Thanks

After searching the bios again I found that the port was disabled Printing fine now

P6N SLI Platinum - intermittent video fault

I have recently bought the following parts:
Intel Core 2 Duo E6420, 2.13GHz, 1,066FSB, 4MB
MSI P6N SLI Platinum
Akasa Ultra Quiet Active PFC 500 watts PSU (3.3V/30A, +5V/30A, +12V1/18A, +12V2/18A, -12V/0.5A, +5Vsb/3A)
2 x 1GB Crucial PC2-5300 Non ECC CL5
XFX GeForce 8600GTS 256MB DDR3 PCIe (PV-T84G-UDF3)
1 x Western Digital Caviar 160GB 7200rpm, S300, 16MB SATA (system disk)
3 x Western Digital Caviar 500GB 7200rpm, S300, 16MB SATA (data disks)
BIOS – 1.1 updated to 1.3, default settings (I'm not overclocking)
Windows XP SP2 OEM
When I got everything installed and wired up I turned on the power and saw the MSI spaceship screen for a couple of seconds then the screen when blank. The computer sounded as though it was continuing to boot up and eventually settled down with 4 green lights on the D-bracket 2 connector. I powered down and physically re-fitted the video card a couple of times and it seemed to work OK. A couple of days later, after successfully installing the OS and other applications, the same thing happened again. Once more I took out and re-fitted the video card and this seemed to do the trick. After this happened a couple more times I concluded there was a fault with the video card and sent it back for a replacement (efficiently handled by Dabs). This duly arrived and as soon as I fitted it in the same thing happened again!
I’ve checked all the PSU connections and everything is where it should be. The fault does not seem to be connected to the temperature of the processor or GPU and in fact seems to happen most often when the computer has not been on for a while. I can continue to access data on the hard drives over my home network so everything else appears to be working even when there is no video. I can now pretty reliably get the video working again by switching off, putting the computer case on its side and then re-fitting the video card – power back up and hey presto everything is fine for a while until it happens again a few days later.
I’m mystified. I presume there is some kind of problem with the motherboard but would appreciate any suggestions for a solution before I take the computer to pieces again and send that back for a replacement.
Many thanks,
Peter

hmm... this is a strange problem. Reseating the video card, hmm... but is it every power on you will still see the MSI screen? can you go to the BIOS and disable the MSI spaceship screen? something like disable POST logo etc. And see if there is any error message? It might not be your video card.

P6N SLI Platinum, no post (also!)

Hey guys.. I think I checked everything, but want to make sure.
Relatively new P6N (bought it, didn't have processor, stored it for the last 6 months) Platinum board. Finally got the CPU and Memory today (info below). Plugging it in, and I get.. nothing. No post, no beeps (with connected speaker), all lights on D-bracket *OFF*, all lights on keyboard *ON*. All fans come on as well. Both yellow/orange LED and the green LED between PCIs come on.
I slowly disconnected everything, and even ONLY with the board and CPU (no vid card and RAM, only front-panel and D-Bracket connected), still same result. Now, I'm thinking it MAY be the CPU, however, I would expect to still get ALL RED on the D-Bracket as per the manual. I don't have ready access to another 775 processor.
Items:
CPU - Intel E8400 (Wolfdale)
RAM - Corsair XMS2 (model "TWIN2X2048-6400C4") I've heard there was issues with this, is why I turned the board on without ANY RAM. Yes, it would not have posted, but I would/should have gotten a signal on the D-Bracket!
PSU - Antec NeoHE (430W, 3 12V rails, +3.3V 22A; +5V 14A; +12V 16A / rail; -12V 0.8A; +5Vsb 2.5A)
The only thing I have left to do is to try it outside the case. However, I'm posting here now in case anyone sees anything obvious I missed. I actually HOPE it's something I can do here - even if it NEEDS a bios update, I would still expect the D-Bracket to give me all reds ("The System will hang here if the CPU is damaged or not installed properly.") However, I'm afraid to turn the board on without a CPU. (Is that safe? Dangerous? I was iffy about not having the RAM in..)
Thanks all!
Mike.

Quote from: Jack the Newbie on 27-February-08, 04:18:29
The options usually change with the CPU that is installed.
Not sure, if the problem is only the current BIOS or if it is your CPU after all. It is hard to say at this point.
Eh, I'm hoping it's not the CPU. I can't verify if I get different options with the E8400 only because I get the same result (after updating to 1.5 and 1.6b3 BIOS revs as I had originally - everything powrs on, no D-LEDs (all off, NOT all red) and keyboard LEDs all on. So I don't even get the change to get into the BIOS to verify. :/ I'm sure that if I COULD, I could tweak the settings to at least get a stable system until I could use the processor at it's fullest, but.. as it is now, it's a nice lump of silicon.
Quote from: Jack the Newbie on 27-February-08, 04:18:29
This guy....
https://forum-en.msi.com/index.php?topic=114440.0
... was apparently able to get an E8400 working on a P6N SLI(-FI). It has the same model name & PCB Version as the P6N SLI Platinum.
I don't know, the best thing is probably to wait for a BIOS Update. Can you test you processor on another system that already supports Wolfdale CPUs?
I'm waiting. It's impressive - the P6N, even with the cheapest 1.6GHz Celeron processor is really nice. I won't have another LGA775 system to test with for another month. Hopefully, they'll have another beta or have released an update by then..
Thanks for your help, of course!
Mike.

P6N SLI Platinum random shutdowns

System:
MSI P6N SLI Platinum MoBo
Intel E6750 CPU
Etasis 850W PSU
Corsair CM2X1024-6400C4 RAM (using only 1 stick while troubleshooting)
MSI NX8600GTS GPU
OK, this is a strange one. I put my new system together and everything seemed to be working fine. POST looked OK, and I was even able to install Windows. Everything seemed stable.
One thing that troubled me was that the lights on the D-Bracket were all red AFTER POST. In other words everything was working, but the LEDs were showing CPU problem. I tried everything I could think of to get the lights to go away, but nothing worked. I disconnected all HDs, DVD, and floppy drives. I reset the BIOS, and reseated the CPU. I tried putting RAM in different slots, tried both sticks solo, but nothing made any difference.
It was getting late, so I decided to go to bed and run memtest86+ over night. When I got up this morning the system had powered itself down. When I turned it on again it powered itself off within a minute of being turned on. This was with all the drives hooked up, so I disconnected everything and now it's been sitting happily in the BIOS for over 30 minutes.
So at this point, it seems like it could be a power supply issue. Unfortunately, I don't have another PSU with an 8-pin CPU connector that I can try in this system. Any thoughts? Next steps to try?
Other possibly useful facts:
When I boot into the BIOS the D-Bracket lights show #3 green, and all others red, indicating "initializing keyboard controller". But when I boot past the BIOS to a CDROM or Windows, they show all red, indicating "CPU problem"
The system makes a brief chirp the POST screen. It doesn't sound like a beep code to me, and I've heard some boards will do an "everything's OK" beep like this. But it could be important so there it is.
Although it seems happier with all the drives disconnected (indicating a PSU problem), it still shows all red LEDs on the D-Bracket (indicating a CPU problem).
This is not the first system I've built, and I was fairly careful about putting everything together the right way. The only goof I know of is that at one point I was unplugging and re-plugging things and I ran the system for a while without connecting PCIE power to the GPU. Could that have broken something?
Any help would be much appreciated.
-Steve

UPDATE: I tried hooking up my old 400W PSU with 20-pin ATX and 4-pin CPU connectors (apparently this is OK to do) but there was no change. Still four red LEDs.
I also tried removing the PCI-E GPU and booted it up with an antique PCI VGA card. Again, no change. Maybe I really did get a bad CPU?
Any other ideas, before I try to return my CPU?

P6N SLI Platinum, audio driver update gives "No Driver was supported..."

Similar Messages

Maybe you are looking for