P6N Sli Platinum E6600 Bios version ?

Hi.
I have the P6n Sli Platinum, I used the Live Update tool to upgrade my Bios.
The Bios it upgraded to is version 1.7 but on the Cpu support page E6600 should use the 1.4 Bios ?
After the upgrade my computer became slow and started to stall on me and about 1 hour later my video card died.
I have tried another video card and the motherboard works fine.
I'm just wondering if version 1.7 should not be used with E6600 ?
If not, why ?
And could the bios upgrade kill my video card ?
I know it sound weird but I wanted to check...
Thanks.

Quote
The Bios it upgraded to is version 1.7 but on the Cpu support page E6600 should use the 1.4 Bios ?
No, you are reading it the wrong way: What the CPU Support list is trying to tell you is that you need at least BIOS Version 1.4 to ensure that the E6600 is fully supported. Using v1.5, v1.6 or v1.7 with an E6600 is no problem.
Quote
I'm just wondering if version 1.7 should not be used with E6600 ?
It is totally okay to use that BIOS Version with the E6600.
Quote
and about 1 hour later my video card died.
That has nothing to do with the processor & BIOS Version. It was probably just a coincidence.
Quote
And could the bios upgrade kill my video card ?
That is very unlikely.
Quote
I used the Live Update tool to upgrade my Bios.
Please try to avoid MSI Live Update (or any other Windows based BIOS Flashing Application) in the future. Windows based BIOS Updates are very risky. >>Use the MSI HQ Forum USB flasher<< instead, if a BIOS Update should every be necessary again.

Similar Messages

[P6N SLI Platinum] black screen NO BOOT after D-bracket replug [RMA-SOLVED]

Quick setup specs;
P6N SLI Platinum
E6600 (box/stock 2400mhz basic)
2x 1Gb DDR2 6400 Gskill HZ
Sapphire ATI X1600Pro (PCI-e basic)
Aerocool Zero DBA 620W
(2 HDs sata, 2 Hds pata, 2 optical pata at first -all OK at first, disconnected after, so irrelevant here ,( )
(XP Pro clean new install from start)
I tried to check the forum old posts before trying to write that new one, but could not find any really related totally adequate posts so far (or i missed them, sorry if so, then -?). I could already find very useful informations on first aid usual 'rebooting' procedures to follow with minimum new boot configurations, d-bracket new LED signals etc. But so far no luck, all same, nothing better, nothing cured here for the stuation here. ,(( Also excuse my english if not perfect, i am not english either. ,(
VERY bad & sad problem here... ,(((( :
All was working perfectly great during 5 days.. the P6N SLI platinum install went GREAT initially (as normal, not a first pc built, all normally happening, so far so good, etc).... all hardwares compatible together at first (dedicated ATX 'full' 8x8 pins connector too for the cpu only for ex -all working perfect at first try. quick tensions 5V/12V under msi dual core control tool perfect too etc), was great easy going/ great strong ultra-stability feeling on the hardware side.. i was just now concentrating on the software side (no special BIOS tweaks even attempted so far, all on basics-normal e6600/ddr2 auto-settings, apart at the end ddr2 quick test -when problem occured- on 450(900?)Mhz at 2.1V, far far easy under its possible specs max anyway.. and had been working perfect for 3 days with that little ddr2 boost try -no time for special bios further tweakings now, etc), reinstalling and transfering/reorganizing slowly my necessary files/hds/softwares from old to new setup, no oc, nothing special tempted (i was planning oc, new cpu more suited fan/silver6 etc only for the end..), LAN file sharing setup done, Realtek audio setup test done, etc ; installation had been so far one of the quickest and problem free ever... explaining maybe also my fatal lack of cautioun for just (too much) 3 sec in the end after 5/- days of perfect working new ring going on.. ,((( :
At first, i also tried to immediately install the D-Bracket too to check possible hardware install problems -very useful feature i of course thought too..and wanted to try too, "in case of"..- (installing it from quick reading of the printed manual..with no colour pic coding inside..and quick error coming from there thereafter with an initial mismatch usb/jbd1 inverted plugs connections.. *both* having the exact same pins numbers and dispositions, beeing side by side on mainboard layout.. and so able to connect both headers indifferently.. so i did not see it immediately (( .. and no way to see it otherwise as such, anyway.. ,( ), just to be sure all was ok. I noticed that LED were of course, never lightning (not normal).. but as EVERYTHING else was working fine (GLAN, sound, etc etc).. i did not bother more than that -- error checking not necessary.
Till that fatal clumsy day i wanted suddenly to.. check the D-bracket too. ((((
All was working well, XP pro opened for hours as usual etc..
i had not yet totally finished to install the motherboard in the pc-case (always on desk, free in sight..)... so i could always see the connections on it. ... and i noticed that ... the colour headers codes were NOT matching (usb=yellow..).. i had just stupidly initially badly connected the D-Bracket jdb1/usb adjacent plugs (inverting them), so... And still, all had ever worked perfect.. except the D-Bracket, of course, was sending back no lights then, obviously.. so i did the fatal error.. confident all was stable enough and strong if even that initial plug error had had no consequences at all.. i did the fatal bad move to try to UNPLUG the D-Bracket connectors and put them back in right orders WITHOUT switching OFF the power supply so... like an hot USB plug, sort of, in a way. fatal error.. :( :( :(
As soon as i began to remove the usb/jdb1 connectors and put them back in normal order... the system suddenly SHUT DOWN ... no special bad noise, no special smell.. just sudden SHUT DOWN.
From there.. impossible ever to boot back again the so far perfectly working machine (((((((((((( , always same till now :
i switch on the power supply.. orange led appears on motherboard (ok)... i switch on the motherboard.. green led on motherboard appears (ok)... CPU fan begins (ok), video fan begins (ok) .... and... NOTHING.. total black video screen. no more even possibility to see the BIOS. :( total dead startup .. and the fans are going on eternally, blocked eternally in that inital startup with leds on too (no sudden shut down after a few seconds.. just.. nothing)... :(
Suprem irony.. the D-bracket LED seems to 'work' now.. "of course". Just the PC no more booting at all ^. Only thing is that only green LEDs are appearing, no red ones... simply the sequence, from start and never changing :
1. GREEN 2. GREEN
3. GREEN 4. (---) (not red, just nothing -?)
If i look in manual, it means "Testing RTC (real time clock)". I don't know exactly what it means *here*, but sounds to me it is the most basic initial first BIOS checking.. and BIOS can't be reached for even that so ; BIOS fried???? :( :(
I tried every 'standard' things recommanded usually here in older posts, for new boots recovery attempts thereafter in such 'boot errors' situations (clear cmos button pushed in every possible ways -quick, long, quick etc..-, removing little by little everything but the very minimal least energy taxing setup; keyboard, cpu, video, motherboard; 1 ddr2 nearest cpu slot.. point).. NOTHING. Worst, i tried to boot with one of those elements missing.. exact same D-Bracket lightning from start to.. eternally (123 GREEN 4-nothing). Even tried to remove the little (cmos?) KTS lithium battery for a few hours -that could work sometimes with the old already ultra-sensitive amd/nforce2 chipset bioses problems, so i tried there too-?-; same 3 green lights and fans running and nothing else happening from there.. ((
Always the same; total dead boot as above. black screen. no possible access to even bios panel. ,(((
So my desperate questions, now: of course, the origin is obvious here; all happened "by my fault" when i tried 'too quickly' to 'hot-plugging' replace correctly the D-BRACKET plugs *without* switching off the power supply... all shut down suddenly when i put back correctly the usb& jdb1 headers... :( ;
- do you think there could be any possible last HOPES to recover the situation that i had missed (a well known situation in such d-bracket handling 'common' (?) connection error, a simple trick to try i had missed ??)
- do you think i FRIED something in the process on the motherboard ?? :( :(
- do you think it is 'only' the BIOS (fried????) ?? :( :(
- do you think i could have fried a specifical external key component in the process (not necessarily motherboard) : ddr2 modules, cpu, video card????? :( :(
- is my only solution is to send the motherboard to RMA (no other ways now) ???
please, don't hesitate to give me any possible hints to try to avoid the RMA process.
can i avoid it, right now?
is that possible to fry an whole board just with such a D-Bracket 'hot plug switch' (on a so far perfectly working -light- setup - no oc, little video card, etc) ???? :( :(
That is the only C2D Intel/ddr2 motherboard i have here around. No possibility to test elements by elements for precise error checking (cpu, ddr2 modules, video card or powersupply).
Only things i could check so far are;
- the power supply (aerocool 620W zeroDBA) ;
i tested it back on my old amd xp-m nforce2 setup.. always working apparently. NOT 'fried' so, apparently. but no way of course to test for exemple the special 8x8 (or 8x4) Intel ATX cpu connector on old xp-m motherboard. But power supply NOt fried at least, apparently -?
- the video card.
no way for me to really test the pci-e card on other motherboard around but.. i tried a very old PCI VGA card.. that one works on old setup.. and on P6N, no effect, doesn't improve the situation. So, not sure the new pci-e video card isn't fried.. but a new video card doesn't correct the dead boot problem.. (
No way for me to test the ddr2 or CPU directly though.
Do you think DDR2 or CPU could have been fried in the process too ???
or just, as i fear anyway, 'simply', the motherboard BIOS fried -??? :-(
Really, thx for any suggestions..
if there could be an 'hidden' trick i did not try yet to try to recover the (initially working perfectly!!! (( ) setup, WITHOUT engaging the motherboard RMA process (at least 2 or 3 weeks lost here to wait the return..online store etc..)....
please, suggest me.. ,((
i am *really* very sad of that stupid clumsy idea to want to 'enable' the D-Bracket.. all was working great so far.. and i lost all with just that stupid idea to try an hot plug bracket reconnection without switching off the power supply it seems.. can it be possible,sigh?? all seemed so stable before that, that i.. just lost my usual cautious just 3 sec too long it seems... :-(
Thanks in advance
hoping post not too long too, but i tried to expose the situation as precisely as possible; first time i ever had such a problem with a motherboard/system install.. that is quiet ironical knowing it was also the best and quickest/easiest easy going new built i ever had so far too.. till then ,( .. and all came from the 'helper' d-bracket 'luxury second hand possible boot helper diagnostic tool' checking in the end too, here.. really hoping i can avoid an RMA process.. and no other hardware elements (apart the motherboard?) could have been damaged in the process ? ,(((

hi, thx a lot for the quick answer. sorry for the length indeed (i did not know exactly how to describe the situation.. without omitting any later possibly important details).
Alas, i already tried that many times in following interesting asnwers on similar problems in old posts here; did NOTHING. ,(
But after your post, i tried it again, and removed for the remaining *hours* (6/8h?) the cmos battery as suggested again *too* so -pushed again the clear cmos button etc when battery out, then when in again, then replugging the powersupply etc; NOTHING better alas too. always same, no boot, black screen, no bios. ,(
Problem always the same, to sum up, for clarity:
power supply on => orange motherboard led is lightning up, motherboard on => green motherboard led is lightning up, cpu/video/case fans are working up as normal and.. that's all. nothing else forever. black screen. no signal. not a single chance to get again the bios setup screen.
another detail i omitted, maybe; keyboard lights are all lightnng up too.. and stay blocked in that state too. tested with 2 different keyboards, same. to shut down the leds, fans etc, only one solution, shut down the power supply button directly, at that stage.
right now, i test on barebone minimal system as recommanded too;
cpu, 1 dimm (closest cpu slot), video, keyboard. all rest disconnected.
i of course tried to reset the cmos with the 'magical red button' many times before, with power supply cable plugged out, pushed the button trying almost every possible way so far (quick, long, long sequences, short sequences etc etc)... changed NOTHING so far -is that thing working?? ,(. and right now, same after hours with cmos battery removed too. ,(
the d-bracket leds are always (now it is correctly plugged..) :
123 GREEN 4 (nothing)
"Testing RTC (real time clock)"
another 'interesting' detail is that; those leds are appearing IMMEDIATELY after the motherboard is switched on, from start (green led appearing on P6N). and it is staying as such till the end. nothing else. i tried to connect also the case speaker ; no bips, no sound signals at all too.
I also remind the system was WORKING like a dream during 5 days *before* i had that sudden TOTAL boot problem.... AND i touched almost nothing in the bios too all along, for initial security reasons too.. (i was concentrating on the software installs anyway right now, NOT on the oc side..). The ddr2 quick little change i did was also the ONLY change i tempted to simply test quickly some setting i already saw working without problem with that P6N and that kind of ram.. and it was working without problem so far too, so.. all the time idem. And it had been perfectly working for 3 days as such untouched from there; no problems at all (those memory modules have been seen on that motherboard largely at those specs, why i did that quick test anyway.. far under their possible max -micron chips). it was even working so well i forgot to put the setting back as default after that quick ram test.. so much it was stable too (even if i had not time to do real memtest test on that one - i did for many hours with the initial automatical default settings too, to check the ram quality, was perfect for many hours, so ok too, no bad ram initially too-; was so stable for all my XP software installs operations etc.. that i forgot it thereafter, to be true..why it stayed like that till that moment (incidently).. but i preferred to mention it 'just in case' though, yes. i also did not push at all the dimm voltages in the process, it was always far inside the specs at 2.05V to be exact -usual for that ram too up to those numbers easy for it. i did not push the ram voltages either so..).
The problem ONLY appears when i wanted to unplug the *initially* badly connected D-bracket headers so (inverted headers.. but that caused NO problems either so far too for the system stability.. only the LEDs were of course not working so far..) : i did the error to NOT switch off the power supply. :(
*then* immediately the system shut down... and above situation appeared. ,(
BUT all was working perfect before.. ram setting included so. ,((
So my simple questions now too ;
- do you know what means *exactly* the d-bracket message 'Testing RTC" (123 GREEN, 4 nothing).. initial bios problem, isn't it?? other ways to recover it now?? ,((
- is it a WELL KNOWN PROBLEM when we try to disconnect and replug too hastily the d-bracket headers without switching off the power supply (*my* main erorr here, it seems :( :( ) ????
... and of course, do you think it could have *fried* another key component (cpu, ram -?? why i reminded the setting, just in case-?-, video card? .. ) with that d-bracket initial disconnection error ... ,(
as i said, i have no secondary c2d/ddr2 motherboard here : no way to test the cpu and ddr2 modules on another motherboard to be sure too here. :( i absolutely can't know if they have been damaged or not, here.. :( :(
any other idea for the motherboard itself though ??? ,(
once again, thx a lot for any suggestions and precisions on that problem (is that a COMMON well known problem with the d-bracket, when we unplug and replug it without extrem care like i did -my main inattention error it seems.. mainly because all was so stable before too.. ((( - without shutting down the power supply/system FIRST ???? can it be possible 'only' that shut down all the system??? (( )
thx in advance again +

P6n SLI PLATINUM bios v1.2

So I upgraded to 4gb ram finally, and have got it to work without errors in dimm slots 2 and 4, and have been having performance issues such as slow loading, stuttering in games, and just in general slowdown with loading up applications, but absolutely no crashes or freezes of any kind, no BSODs or anything else that would be hardware related I assume.
Defragged, fresh install of windows 7, video card drivers updated and everything else checks out fine. The only thing I can think of is that over in HardForum doing a google search brought me to this post:http://www.hardforum.com/showthread.php?t=1164174 with issues related to 4gb on the mainboard having slowdowns with older bios versions.
Seeing as how this is relevant to me getting new memory, my patriot memory gave out with BSODs so I was forced to upgrade but had way better performance with just 2gb stick of ram (even in win7).
Should I do a bios update?
Specs:
EVGA 8800gts 540mb 195.62 driver
4gb A-Data ram 5-5-5-12 2t clock, 1.9v
Windows 7 64-bit
Bios v1.2 A7350NMS P6N SLI Platinum Socket LGA-775
Core2duo E6600 @2.4ghz
I haven't really done much upgrading since I purchased this a few years back, and quite surprised to see the hit and stuttering in performance in games all of a sudden after upgrading to new ram, and the ram tested out fine for 3 days straight doing multiple passes with memtest 4.0. I tried doing it in DIMM slots 1 and 3 but have been getting errors, maybe I've got a bad board?
Quite confused as to what step I need to take next, thanks for any help!

Quote
Should I do a bios update?
Yes. >>Use the MSI HQ Forum USB flasher<<

Is there a new bios coming for P6N SLI Platinum for E8400 ?

Hi everyone,
( My system specs are in the signature )
I have been thinking to upgrade my cpu to E8400, but after some time passing through the forums, internet and asking some of my friends, I have decided not to. This is because I have seen many people frustrated and trying get their E8xxx's working on their moboard with endless efforts because of the wrong information given in the CPU support list of P6N-SLI Platinum. Yet, I have seen that only a few people have managed to get it work but with risky, manual adjustments.
So here is my question, will there be a new bios for P6N SLI Platinum that will make E8xxx series post without any adjustments for the users that want to stick with their P6N SLI Plat.?

Please ask here:
http://ocss.msi.com.tw/

P6N SLI Platinum Bios update in Vista x64

Just wondering how I update the bios for my P6N SLI Platinum in Vista x64? When I d/l the bios all the stuff is for 2000/me/xp. Why is there no vista support under anything?

Use the USB flashing tool developed here at the forums.
clickme>>MSI Forum HQ USB flashing tool!!!<<clickme

P6N SLI Platinum (MS-7350) BIOS issue

I RMA'ed my P6N SLI Platinum MS-7350 and got back another identical board. However, this one has BIOS 2.7 in it. Bios 2.7 according to MSI page on this board is actually for the P6N SLI (also a MS-7350). The latest BIOS for the Platinum is 1.7. Im confused. Should I reflash it to 1.7 so that it has the proper BIOS instead of a BIOS from the P6N SLI not platinum? I know I have the platinum because the box says so AND the board has the copper heat piping across it unlike the MSI picture of the SLI (non-plat).

Quote from: TeachDJ on 05-January-10, 01:15:33
I have those: eSata, Firewire, and SPDIF port on this board yet, BIOS is currently flashed at 2.7 as mentioned. Thanks.
Then they clearly did return the Platinum board to you, as the P6N does not have those extras.
And (apparently) the v2.7 BIOS works with the Platinum as well as the plain P6N. Fascinating. Maybe you want to contact Tech Support about it, but if it's working--why are you concerned?
I'm interested because my P7N Platinum has a v1.3 BIOS, and (like your P6N) the lesser-capability board, the P7N, is up to BIOS v2.2. So I have wondered "Why is the simpler board getting more recent updates than the more sophisticated one?" But my system is working perfectly--it ain't broke so I don't need to fix it!

P6N SLI Platinum BIOS issue...

So I purchased an e8400 processor after the 1.6 BIOS update came out for my P6N SLI Platinum, got it yesterday. I put the processor in and it didn't work . I turned to Google to have the internet fix the issue, and it seems if I adjust some options in my BIOS, it may make the e8400 work. Two of the things it said to change were EIST and C1E. I went into my BIOS, and tried hitting F4 in the CPU menu to get C1E to show up, but it won't. The EIST option is no where to be found either...
Anyone else running into the same issue, or got a e8400 to work after changing stuff in the BIOS?
Thanks a lot!
EDIT: Forgot to post my system specs
Mobo: P6N SLI Platinum
CPU: Intel Pentium D 930
RAM 2GB (1GB x2) Patriot DDR 667 (PC 5300)
GPU: eVGA nVidia GeForce 8800GT
PSU: Thermaltake 500W

I used that bios, but on my regular p6n sli and got it to work. here is my topic on it
https://forum-en.msi.com/index.php?topic=115998.0
Dont clear the bios after you take out the old cpu or it wont work
I have been tinkering with it all day just to see what the actual problem is and it doesnt seem that it is the EIST OR C1E. from what I have done it seems that it is a problem with the voltages that keeps it from booting. If you change those with the other cpu in and then save and exit. Dont let it reboot, shut it off before it starts to boot up again and put the e8400 in

P6N SLI Platinum Won't Load Vista or XP

I trying to load an OS on a new build, but have run into an issue. The build went well, but the OS won't load.
While trying to load Vista (32bit) it says "Loading Operating System" and the progress bar goes all the way to the end but then never gets any further. It just sits there.
So, not being familiar with Vistas load I thought I would tried XP Home SP2. With this I am at least able to partition the drives and choose quick format but once it gets to 20% this too freezes.
So far I have gone into BIOS and chosen to load both safe defaults and optimized defaults, which makes no difference. I have also tried removing one or the other of the memory sticks, again no help.
Here is the system particulars.....
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX MB
Intel Core 2 Duo E6600 2.4GHz 775 Processor
Antec Truepower Trio 650w PSU
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
1 - Western Digital Caviar 200GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - Western Digital Caviar 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - GIGABYTE GeForce 7300GT 256MB GDDR2 PCI Express x16 Video card
1 - DVD drive
1 - Sony Floppy
Everything is brand new. Any help would be greatly appreciated

Quote
Regarding Dual Channel Mode:
Am I reading the manual wrong? In the illustration it shows 4 DIMMS, the closest to the CPU being DIMM1, followed by DIMM3 (which are yellow), then DIMM2 and lastly DIMM4 (which are orange), and it states that in order to take advantage of dual channel to place the memory in DIMMS 1 & 2 and/or DIMMS 3 & 4
Sorry. I did not realize MSI relabeled the DIMMs. You are right of course.
[CPU] - DIMM1 - DIMM23 - DIMM32 - DIMM4
[CPU] - SLOT1 - SLOT2 - SLOT3 - SLOT4

P6N SLI Platinum not booting after CPU change

I just upgraded the CPU in my machine with a P6N SLI Platinum motherboard from a E6700 to an E8500. I first upgraded the BIOS to 1.7 as the MSI page seemed to indicate that was a pre-req for this CPU. The machine was working fine for a day with the new CPU.
I changed the CPU in the machine and when I tried to boot, the lights on the motherboard came on as well as the fan, but no video or sound. In addition none of the diagnostic LEDs on the D Bracket light up. They had been previously working. Neither do the lights on my memory sticks light up.
I tried clearing the CMOS by hitting the switch but nothing. I am now going to try switching back CPUs but I don't have much hope that that is the problem given the diagnostic LEDs don't light. Does anyone have any suggestions as to a fix or is this motherboard fried?
P.S. Do you hit hte CMOS clear switch when the computer is off but the motherboard is charged? Or do you unplug the computer and wait for the internal orange light to go out as well too?

Quote from: Henry on 24-January-10, 11:41:19
What is the QC number (by the cpu socket) is 01, 02, or 03?
See this thread for more:
https://forum-en.msi.com/index.php/topic,123486.msg932471.html#msg932471
Ah. Given I bought my P6N SLI Platinum 3.5 years ago when they first came out I imagine mine is one of the older versions that doesn't support 45nm CPUs by default. Is there a photo somewhere showing where the QC number is located exactly on this MB? It's probably located under my huge CPU heatsink and I'm not going to remove that for a third time just to check.
I really wish the MSI CPU compatibility page mentioned that. It would save me a lot of time. It's not worth my time and effort to dismantle my PC, send them the MB and wait for them to send me back a compatible one.
I verified the BIOS upgrade by looking at the version number at startup and using CPUZ.

P6N Sli Platinum front audio panel and CPU temp voltage issues

Hi All,
I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
Any reply will be appreciated.
Cheers

Quote
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures. Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ). This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor. It is rather the MSI tool that does not read the data it provides correctly.
Quote
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
There is no issue. What CPU-Z allows you to see there is the C1E-feature of your CPU at work. When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down. As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically. It is meant to be a good thing.
I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle.
If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere. You may be able to hit "F4" to unhide it.
The MSI utilities are not the best tools to monitor your system. CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

P6N SLI Platinum, audio driver update gives "No Driver was supported..."

I have the audio driver from the CD that came with the mobo, but I wanted to update it to the new version. Currently I have R1.67 2.32, I tried to install the driver (R1.83 2.51) from http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140 but get the message "No Driver was supported in this driver package".
Also, I went to the Realtek site and got their even newer driver R1.84 but it asked me to remove the previous driver first, I'd rather check with the boards first to see what is going on.
P6N SLI Platinum
BIOS 1.4
Realtek Audio onboard

Could you please point me to where I can locate Live BIOS, first I hear of it. Thanks for the input btw.
Another off topic question. Does the Dual Core Center work ok with Vista x64? Wondering just in case before I get to using it. On my first Vista install is seemed to work, 2nd format it would come up with 2 error messages and not start:
"Error! unable to load ntuneoem.dll" and "Failed to load overclocking driver! This program must run as an administrator."
I have ntune installed on my 2nd format (which I found out doesn't work in Vista 64 properly) but cannot uninstall it from Add/Remove. A wizard window comes up and closes in the same seconds when I click uninstall. Tried to uninstall using the MSI CD which with I loaded it, still gives an error (tried to google the error msg but the msg is extremely rare and doesn't point to the problem). Going to have to manually remove it it seems and hope I get it all.

P6N SLI PLATINUM CMOS BAD CHECKSUM ERROR TIME DATE

I have the same problem. It’s driving me crazy. Here is my specs:
MSI P6N SLI Platinum LGA 775
Intel Core 2 Duo E6420 2.13GHz 4M shared L2 Cache
Foxconn GeForce 7900GS 256MB 256-bit GDDR3 PCI Express x16
Western Digital Caviar SE16 WD7500AAKS 750GB 7200 RPM
Kingston KHX6400D2LLK2/2G 2GB kit PC2-6400 800MHZ
LG DVD GSA-H50N DVD-R 18X
Matsu"I'm a potty mouth"a Floppy drive
Windows XP 32-Bit
CoolerMaster RP-500-PCAR – 500W
+3.3V +5V +12V1 +12V2 -5V -12V +5VSB
20A 20A 16A 16A 0.8A 0.8A 2.0A
Sometimes the computer boots ok, and everything works great.
Sometimes it just doesn’t boot, it just gives a blank screen. So, I press reset and the post gives the CMOS CHECKSUM BAD. F1 to setup F2 to default.
If I go to the setup everything is just like I left, including the time. Even if I setup the bios with default configuration, the problem continues.
Here is a list of everything I have tried
1) Replaced the battery 2 times. I checked with a multimeter. It’s 3V allright
2) Disconnected everything leaving only 1GB memory and the graphics card
3) Updated the bios version several times, to make sure I did it ok. I cleared the CMOS after allright
4) I read every post in this forum about bios and P6N SLI Platinum
5) Already checked the D-BRACKET. It shows 4 green leds when the screen is blank
6) Already checked fans: CPU and graphics fans works ok
7) Already tested with memtest86+ V2.01
8) Already upped the northbridge to 1.325V, CPU 3 notches and the memory another 3 notches.
So anyone has any ideas, or I’ll just have to go to a computer store and swap the graphics or the PSU and try to see if the problem vanishes??? It’s gonna be tough… they don’t like to let you test the merchandise….
PS: Thanks for all the help so far that you have been giving to TheGimp, after all, we have the same problem…

I had the same problem after ~8months of trouble free service; it was intermittent too. sometimes it would boot fine, others times i'd get the error message. I removed the battery to test it. it was fine. i cleared the cmos with the button while the battery was removed. i noticed that the battery holder seems not to be anchored to the board at all. I haven't confirmed this but it looks like the protruding metal clip holds it all together. i had contacted MSI support about the problem earlier. they told me to clear the cmos. i asked about the battery holder not being secure on the board, and, as in the typical support response to an unusual question, they gave me some vague, undecipherable response. So, anyway when i put the battery back in, i felt the holder kind of click into place. I haven't had any problems since.

P6n sli platinum cannot boot up

Hello
Everytime I boot up the D bracket suggests the computer is failing on initializing the floppy drive controller. i have changed the cable, and changed the floppy drive but same effect.
In the BIOS, if I go through and F10 for no save and exit, it then exits to bank screen as it fails at the point above. If i make any changes in the BIOS, and then try to accept those changes it freezes on pressing either Y or enter. At that point all I can do is turn off and start again. Naturally it doen't retain those changes. I have done this several times to disable the floppy.
I have removed the battery and put it back, (It's 16 months old). It then did allow me to disable floppy but still machine did not go beyond the above point. Whenever I have tried to go back into the Bios again, it will now freeze when I try and accept any change in settings.
As you will see I am unable to even boot from a floppy at this point so cannot een consider updating the BIOS. However before yesterday it has been working perfectly.
Any suggestions, or the loan of an axe to reprogramme the ****** thing would be much appriecated.
Thank you
Malcolm
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago

Quote from: yokochanie on 03-October-08, 13:55:28
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago
"2 memory sticks, 2 gb ram"
That doesn't talk much, we need full details about it.
"Intel Core 2 Duo Processor"
Which one?
"2.20.0050.10 BIOS verison"
That's not your BIOS version, look here how to check==> https://forum-en.msi.com/index.php?topic=113146.0
What VGA you use?
Remove power cord from the PSU and leave just one memory stick in 1st DIMM, once done proceed with >>Clear CMOS Guide<<
Then try to boot, if no change disconnect any storages{4 HDD's, 3 Optical drives, and any USB devices which you may have attached} and re-test.

P6N SLI Platinum mobo with hard drive/sata crashes

i've experienced a (now recurring) problem with my hardware over the past several months. i've come home from work twice now, once about 2 months ago, the other just today to find my computer stuck at the windows xp loading screen. if i tried to reboot the system, it would hang at that point, until i disconnected the offending drive/sata channel (i had 3 hard drives in my system, 1 150gb drive with operating system, ect, and 2 500gb drives for storage (mp3s, video, ect). i've narrowed the problem down to either the motherboard or the sata cables (i don't have spare cables to test with), as the hard drives work perfectly in an external usb enclosure. any ideas of what could be wrong?
basic system stats:
msi P6N SLI platinum motherboard
intel core 2 duo E6600 2.4ghz processor
crucial ballistix DDR2 800 (PC2 6400) 2 gb SDRAM
EVGA GeForce 8800 GTS video card
western digital raptor 150gb 10k rpm SATA hard drive
western digital caviar 500gb 7200 rpm SATA hard drive
PC Power and Cooling Silencer 750w power supply

in brief,
1- if you have one memory it should be in slot 1, closest to cpu, if two X 1Gb then they should be in one and three.
2- do you know what is virtual memory if so have you made adjustment or not.
3- you have freeze due to wrong bios setting till we get a good picture of your bios difficult to pin point the mistake, so use either a digi cam or web cam and take shoots of your bios then we can pin point the mistakes

P6N SLI Platinum Mainboard - 4GB RAM installed, 3GB showing (closed)

I didn't have too much time to trouble shooting this myself, but maybe you guys can help. The BIOS picks up 4GB RAM and after a fresh install of Windows XP 32bit, Windows is telling me that only 3GB is installed. Does anyone have a solution for this?
Thanks.
Specs:
Mainboard - P6N SLI Platinum
CPU - Intel Core 2 Duo E6600 Conroe 2.4GHz 4M shared L2 Cache LGA 775 Processor
RAM - G.SKILL 4GB (4 chips) 240-Pin DDR2 SDRAM DDR2 800
HD - Western Digital Raptor WD740GD 74GB 10,000 RPM Serial ATA150 Hard Drive
Video - EVGA GeForce 8600GTS 256MB
Power - APEVIA ATX-AS680W

Quote from: adamzeliasz on 02-June-07, 02:10:58
Does Windows XP 32Bit still use all 4 GB but only showes 3GB? Or if I want to use that additional 1GB I need XP 64Bit? If I install x64 will it work with 32 bit applications fine?
"Does Windows XP 32Bit still use all 4 GB but only showes 3GB? "
no.
"Or if I want to use that additional 1GB I need XP 64Bit?"
yes.
"If I install x64 will it work with 32 bit applications fine?"
yes. pretty old 16 bit application will refuse to work, also you will need to use x64 drivers.

P6N Sli Platinum E6600 Bios version ?

Similar Messages

Maybe you are looking for