P6N SLI Platinum SATA Support

Hi all,
I have a P6N SLI Platinum and I was just wondering if the SATA ports on this board will support 2 terabyte hard drives. Looking to get some new drives and will most likely pick up 3 drives at 2 TB each.
Thanks,
- Sam

Yup, checked with MSI and their official response is:
"The board could support any HDD in principle, due to this board has been phase out so long, so please test the combination before purchasing."
Not what I wanted to hear, lol. Guess all I can do is order the drives and hope for the best. I'm not expecting problems, but it would've been reassuring to have a useful response from MSI.
Thanks guys,
- Sam

Similar Messages

Question regarding P6N SLI Platinum CPU support?

I went to the product page list on the main MSI website and it lists the Kentsfield CPUs, but I happen to have an Intel Yorkfield Q9450 CPU. The question is, will this motherboard support that CPU or will it only support the ones listed on the product page?
I have the P6N SLI Platinum mainboard and recently got my hands on the Q9450 chip and would like to swap out CPUs with the Core 2 Duo E6700 that is in there now - anyone know if I can or not? The product page says that a CPU with a FSB of 1333 has to have that set manually in the BIOS, which I am willing to do, just need to know if this mainboard will even support the CPU I want to put into it.
Thanks!

Nuts, that's what I was afraid of...I was thinking that since the product page specifies a CPU with a FSB of 1333 (which the Q9450 has) it would be compatible.
Thanks for the answers - looks like I can't re-use my mobo, time for a new one.

Core 2 Quad Q8400 Problem (P6N SLI Platinum) [FIXED]

Hello, I recently bought an Intel Core 2 Quad Q8400 with the understanding that my P6N SLI Platinum will support Yorkfield cores, given I have the latest BIOS. I updated my BIOS to 1.6, yet it just hangs on the MSI screen and will not POST. I just want to know if I indeed do have the latest BIOS, and if so, if there's anything I or MSI can do to remedy this problem. I really don't have enough money for a new mobo or CPU, and I'm going to be extremely irritated if I just wasted $170 on this... Thanks in advance.

Quote from: alj on 10-November-10, 19:27:09
I'm here for help and complain, no msi is not supposed to know what will be intel releases, but i think they can fix the problem by releasing a new bios or simply put on the boxes models when writing that it support this or that technology
if you searched a little on msi.com you would have ended up here:
www.msi.com/index.php?func=prodcpu2&prod_no=1140&maincat_no=1
here it says what CPU 's the board can run.
so MSI does say, what you can use, but it doesnt say on the box, cause it changes all the time, so they keep an online list.
and no, they cant write a new BIOS, its a chipset limitation from the NVIDIA chipset that cant be overcome by BIOS update unfortunatly.
I would go for a cheap P45 board, they can almost run all s775 CPU's and its newer then the P6N.

P6N SLI Platinum, audio driver update gives "No Driver was supported..."

I have the audio driver from the CD that came with the mobo, but I wanted to update it to the new version. Currently I have R1.67 2.32, I tried to install the driver (R1.83 2.51) from http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1140 but get the message "No Driver was supported in this driver package".
Also, I went to the Realtek site and got their even newer driver R1.84 but it asked me to remove the previous driver first, I'd rather check with the boards first to see what is going on.
P6N SLI Platinum
BIOS 1.4
Realtek Audio onboard

Could you please point me to where I can locate Live BIOS, first I hear of it. Thanks for the input btw.
Another off topic question. Does the Dual Core Center work ok with Vista x64? Wondering just in case before I get to using it. On my first Vista install is seemed to work, 2nd format it would come up with 2 error messages and not start:
"Error! unable to load ntuneoem.dll" and "Failed to load overclocking driver! This program must run as an administrator."
I have ntune installed on my 2nd format (which I found out doesn't work in Vista 64 properly) but cannot uninstall it from Add/Remove. A wizard window comes up and closes in the same seconds when I click uninstall. Tried to uninstall using the MSI CD which with I loaded it, still gives an error (tried to google the error msg but the msg is extremely rare and doesn't point to the problem). Going to have to manually remove it it seems and hope I get it all.

P6N SLi platinum supports some yorkfields

Just in for the P6N SLi platinum users:
The Yorkfield Q9300 and Q9450 are supported on the mainbord with the current BIOS, 1.5 as well as the wolfdale E8190, E8200 and E8500
The Q9450 and E8400 are still under testing.
Look here:
http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1140&maincat_no=1&cat2_no=170&cat3_no=#menu
Great news, altough the QX doesn't work, you now can still buy a new quad with nice speeds

When I read the site today it says than none of the 45nm CPU's such as the Q9300, 9450 etc are supported. Am I misreading this? In a separate thread I mentioned my dilemma. I have the P6NSLi Plat board and need a quad core CPU to run the application I need it for (golf simulator). Any options? Also need a Geforce GTX 285 or 295 card. That should work, correct?
Jeff

P6N SLI Platinum mobo with hard drive/sata crashes

i've experienced a (now recurring) problem with my hardware over the past several months. i've come home from work twice now, once about 2 months ago, the other just today to find my computer stuck at the windows xp loading screen. if i tried to reboot the system, it would hang at that point, until i disconnected the offending drive/sata channel (i had 3 hard drives in my system, 1 150gb drive with operating system, ect, and 2 500gb drives for storage (mp3s, video, ect). i've narrowed the problem down to either the motherboard or the sata cables (i don't have spare cables to test with), as the hard drives work perfectly in an external usb enclosure. any ideas of what could be wrong?
basic system stats:
msi P6N SLI platinum motherboard
intel core 2 duo E6600 2.4ghz processor
crucial ballistix DDR2 800 (PC2 6400) 2 gb SDRAM
EVGA GeForce 8800 GTS video card
western digital raptor 150gb 10k rpm SATA hard drive
western digital caviar 500gb 7200 rpm SATA hard drive
PC Power and Cooling Silencer 750w power supply

in brief,
1- if you have one memory it should be in slot 1, closest to cpu, if two X 1Gb then they should be in one and three.
2- do you know what is virtual memory if so have you made adjustment or not.
3- you have freeze due to wrong bios setting till we get a good picture of your bios difficult to pin point the mistake, so use either a digi cam or web cam and take shoots of your bios then we can pin point the mistakes

Question for P6N SLI Platinum User : Does ALC888 support Dolby Digital Encoding?

Hello to all P6N SLI Platinum users here,
I have one question regarding Dolby Digital Encoding support on this motherboard. By default, ALC888 does not support Dolby Digital Encoding. But I am still curious. Can you please check on your motherboard, does it support Dolby Digital encoding or DTS Live Connect output to SPDIF? (You may check it by Realtek HD Audio Manager control panel. If there exist such setting option, it means it does support.)
The reason I ask this is I am thinking to switch from 975X Platinum to this board, I am unable to try this myself here as it requires me to reinstall my OS in order to load to WinXP
Thanks in advance.

have a look here:
http://en.allexperts.com/e/d/do/dolby_digital.htm
according to info there its support Dolby Digital Live

PSU support for P6N Sli Platinum

Hi,
This is my first post. I'm about to buy the P6N Sli Platinum mobo, and wonder if my current PSU would support it. It has the following specs:
Sirtec HPC 420-302 DF (420 Watt)
+ 5volt    40amp    220W
+ 3.3volt    30amp    220W
+ 12volt    18amp    218W
- 5volt    0.3amp    1.5W
- 12volt    0.8amp    10W
+ 5volt vsb    2amp    10W
It has a 20-pin ATX connector and additionally a 4-pin connector, I believe this is a +12V CPU-power connector, althought I'am not completely sure it's not an additional connector to connect to modern 24-pin motherboards.
The mobo-manual says:
"This connector allows you to connect an ATX 24-pin power supply.
You may use the 20-pin ATX power supply as you like. If you’d like
to use the 20-pin ATX power supply, please plug your power supply
along with pin 1 & pin 13 (refer to the image at the right hand).
There is also a foolproof design on pin 11, 12, 23 & 24 to avoid
wrong installation"
However, it also mentions the ATX12V power connector, which is 8-pin. Can I connect my 4 pin connector here? Anybody with the same motherboard?

Don't bother about the 300Watt but try to think in amperage (especially on the +12V-rail).
Example:
CPU: 7-8A
HDD: 2A (x2=4A)
Mainboard: 0.5A
3 fans: 0.5A
optical drive: 1A
Now if you take these numbers and add them together you will have about 13-14A not including your graphic card. Even if it would need only 50W (50W/12V~4A) you would already be at the very limit of the +12V-rail.
Even if these numbers above are a little to high and 11-12A seems more realistic (which I wouldn't count on) 6A would be left for your graphic card (72W) and you would still be at the limit of your power supply.
This is just a little example to illustrate the importance of paying attention to the +12V-rail. Maybe 18A is just enough to keep you system running, but I wouldn't bet on it. And to have the PSU working at its limit all the time is usually not a good idea. Remember that the maximum power of the +12V-rail will only be 18Ax12V=216W.

MSI P6N SLI Platinum + 3TB HDD

Hello, I want to buy a 3TB SATA DRIVE for my old MSI P6N SLI Platinum and i want to know if i will have any problem!
SPECS:
MSI P6N SLI Platinum (nForce 430i) Bios v1.7
Intel Core 2 Quad Q6600@3Ghz
4x1GB Kingston ValueRAM 1Gb DDR2 800
F.A. XION XON-630F12P 630 Watts
Sapphire Radeon HD 5850 Vapor-X 1GB DDR5
Windows 7 Professional x64
HARD DRIVE:
3TB TOSHIBA DT01ACA300
thanks!

As I already said:
Quote from: flobelix on 29-January-13, 23:58:02
No, that won't work as that requires a UEFI bios and GPT format which is both not possible with your old board just supporting classic bios. You won't be able to access the entire drive space which makes a (costly) 3TB HDD quite useless.
Better just get nothing above a 2TB HDD.
Connection won't change that.

COMIC BOOTING on P6N SLi Platinum

I run P95 stable for more than 12hrs using Q6600 on P6NSLi Platinum with foll. settings. vcore- +0.2375V, fsb vtt +20% FSB 1620MHz MEM - 2.00V NB- 1.45V SB- 1.60V C1E/ HPET/ EIST -disabled. Mem runnin @ 810MHz @5-5-5-18
problem arises when i switch off the power including the mains. when i boot up next time it doesnt boot & i have to reset my bios. after that i cant directly feed in 1620MHz because it doesnt boot in the range of 1500MHz-1649MHz in 1st attempt. i have to feed in a value above 1650MHz n then restart with 1620MHz. if i dont switch off mains then this problem doesnt arise. i have changed my BIOS battery to no effect.i also have flashed to d latest BIOS which on d contrary has added 1 more problem..it doesnt recognise Multipiers if i change them..i changed from 9 to 8 on my Q6600 & still in d settings including CPU-Z it shows 9 inspite showing 8 in BIOS. how do i solve this problem?
My rig
Intel Q6600, MSI P6N SLi Platinum, 1gb*4 gskill pc6400 ram @ 5-5-5-15 2.0v, EVGA 9600Gt ko version, 1sata, 2 ide hdds, sata dvd burner, TRUE120 wid arctic coolin mx-2

I should also state that when I look at the 'Event Viewer' in component services (I'm running XP SP 2),there are many erropr messages relating to 'service control manager which lists all sorts of issues) and warning messages relating to the DHCP.
This is the message that I get under the warning heading..........
''Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 00D09EC701E2. The following error occurred:
The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. ''
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp................
Does this help in any way. Does anyone have any idea why my connection keeps hanging???

MediaShield RAID 5 implementation on a P6N SLI Platinum plus boot question

Hi guys
I have a P6N SLI Platinum I am considering using to replace my old decrepit Thecus N4100+ NAS enclosure. My NAS has four 750Gb SATA II drives in RAID 5 giving a total usable amount of about 2Tb.
I have a few questions please:
What is the maximum size RAID that MediaShield will support? I seem to recall reading somewhere it was 1.6Tb? This is a problem with 3Tb storage (1/4 redundancy)!!
What is the performance like running RAID 5? What are the read/write times like?
How much of a performance hit does the PC take running RAID 5 with MediaShield? This box has an E5500 quad core 4*2.8Ghz chip but is running some very hungry software (one build is a DAW based on Cubase and various VSTs; another is running Photoshop CS3) which I can't afford to be tied up sorting out low level RAID stuff if it's going to be a problem. Can I dedicate one of my four cores to the XOR for the RAID 5 freeing up the other three for actual PC stuff?
There is currently one SATA drive already in this box containing the OS. If I use the four SATA ports for the MediaShield RAID and buy a 3rd party PCI/PCIE SATA controller card to plug this current drive into will I be able to set it to boot from it or do I need to migrate the drive to an IDE drive and put it on the IDE chain?
Many thanks in advance you guys.
Cheers

Where do I start?
I have a E5500, it's a dual core chip.
Second, media shield sucks. Don't use it unless absolutely necessary.
Buy a pci-e 1x 'firmware' card, I use the RocketRaid 2300 cards, good and cheap. Good, usable RAID5.
They have a performance advantage, a load time advantage, cpu utilization advantage, and most importantly, if you want to migrate your array over to another motherboard, you can. Easily.
If your mobo dies, and you replace it with a more current one, your array is toast with mediashield.\
Boot from a motherboard sata port. Don't boot from a RAID 5 array, trust me.
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115029

MSI P6N SLI Platinum + E6850 + 533Mhz (PC-4200) RAM?

Hi,
I got hold of an E6850 (1333 MHz FSB) CPU for upgrade and I would like to know if it can run with 2Gb hynix RAM (533MHz PC-4200) on my MSI P6N SLI platinum (Rev 1.0). If it will run, how much performance loss would there be compared to using 667MHz or 800MHz RAM?
Thanks.

I am not sure if the Nforce Chipset/Memory Controller is able to support a memory bus speed that is lower than FSB Clock Speed. Intel Chipset usually can't do that (1:1 usually being the minimum ratio supported). However, on your board, the memory speed is not directly tied to the FSB Clock Speed and can be adjusted independently, so the situation may be different. The bottom line is: I can't tell you for sure if it will work or not and therefore suggest to simply test it and see what happens.
Quote
If it will run, how much performance loss would there be compared to buying PC-6400 800MHz RAM?
With the memory bus running slower than the Front Side Bus, there will be definately be a performance difference that is not insignificant.

[P6N SLI Platinum] black screen NO BOOT after D-bracket replug [RMA-SOLVED]

Quick setup specs;
P6N SLI Platinum
E6600 (box/stock 2400mhz basic)
2x 1Gb DDR2 6400 Gskill HZ
Sapphire ATI X1600Pro (PCI-e basic)
Aerocool Zero DBA 620W
(2 HDs sata, 2 Hds pata, 2 optical pata at first -all OK at first, disconnected after, so irrelevant here ,( )
(XP Pro clean new install from start)
I tried to check the forum old posts before trying to write that new one, but could not find any really related totally adequate posts so far (or i missed them, sorry if so, then -?). I could already find very useful informations on first aid usual 'rebooting' procedures to follow with minimum new boot configurations, d-bracket new LED signals etc. But so far no luck, all same, nothing better, nothing cured here for the stuation here. ,(( Also excuse my english if not perfect, i am not english either. ,(
VERY bad & sad problem here... ,(((( :
All was working perfectly great during 5 days.. the P6N SLI platinum install went GREAT initially (as normal, not a first pc built, all normally happening, so far so good, etc).... all hardwares compatible together at first (dedicated ATX 'full' 8x8 pins connector too for the cpu only for ex -all working perfect at first try. quick tensions 5V/12V under msi dual core control tool perfect too etc), was great easy going/ great strong ultra-stability feeling on the hardware side.. i was just now concentrating on the software side (no special BIOS tweaks even attempted so far, all on basics-normal e6600/ddr2 auto-settings, apart at the end ddr2 quick test -when problem occured- on 450(900?)Mhz at 2.1V, far far easy under its possible specs max anyway.. and had been working perfect for 3 days with that little ddr2 boost try -no time for special bios further tweakings now, etc), reinstalling and transfering/reorganizing slowly my necessary files/hds/softwares from old to new setup, no oc, nothing special tempted (i was planning oc, new cpu more suited fan/silver6 etc only for the end..), LAN file sharing setup done, Realtek audio setup test done, etc ; installation had been so far one of the quickest and problem free ever... explaining maybe also my fatal lack of cautioun for just (too much) 3 sec in the end after 5/- days of perfect working new ring going on.. ,((( :
At first, i also tried to immediately install the D-Bracket too to check possible hardware install problems -very useful feature i of course thought too..and wanted to try too, "in case of"..- (installing it from quick reading of the printed manual..with no colour pic coding inside..and quick error coming from there thereafter with an initial mismatch usb/jbd1 inverted plugs connections.. *both* having the exact same pins numbers and dispositions, beeing side by side on mainboard layout.. and so able to connect both headers indifferently.. so i did not see it immediately (( .. and no way to see it otherwise as such, anyway.. ,( ), just to be sure all was ok. I noticed that LED were of course, never lightning (not normal).. but as EVERYTHING else was working fine (GLAN, sound, etc etc).. i did not bother more than that -- error checking not necessary.
Till that fatal clumsy day i wanted suddenly to.. check the D-bracket too. ((((
All was working well, XP pro opened for hours as usual etc..
i had not yet totally finished to install the motherboard in the pc-case (always on desk, free in sight..)... so i could always see the connections on it. ... and i noticed that ... the colour headers codes were NOT matching (usb=yellow..).. i had just stupidly initially badly connected the D-Bracket jdb1/usb adjacent plugs (inverting them), so... And still, all had ever worked perfect.. except the D-Bracket, of course, was sending back no lights then, obviously.. so i did the fatal error.. confident all was stable enough and strong if even that initial plug error had had no consequences at all.. i did the fatal bad move to try to UNPLUG the D-Bracket connectors and put them back in right orders WITHOUT switching OFF the power supply so... like an hot USB plug, sort of, in a way. fatal error.. :( :( :(
As soon as i began to remove the usb/jdb1 connectors and put them back in normal order... the system suddenly SHUT DOWN ... no special bad noise, no special smell.. just sudden SHUT DOWN.
From there.. impossible ever to boot back again the so far perfectly working machine (((((((((((( , always same till now :
i switch on the power supply.. orange led appears on motherboard (ok)... i switch on the motherboard.. green led on motherboard appears (ok)... CPU fan begins (ok), video fan begins (ok) .... and... NOTHING.. total black video screen. no more even possibility to see the BIOS. :( total dead startup .. and the fans are going on eternally, blocked eternally in that inital startup with leds on too (no sudden shut down after a few seconds.. just.. nothing)... :(
Suprem irony.. the D-bracket LED seems to 'work' now.. "of course". Just the PC no more booting at all ^. Only thing is that only green LEDs are appearing, no red ones... simply the sequence, from start and never changing :
1. GREEN 2. GREEN
3. GREEN 4. (---) (not red, just nothing -?)
If i look in manual, it means "Testing RTC (real time clock)". I don't know exactly what it means *here*, but sounds to me it is the most basic initial first BIOS checking.. and BIOS can't be reached for even that so ; BIOS fried???? :( :(
I tried every 'standard' things recommanded usually here in older posts, for new boots recovery attempts thereafter in such 'boot errors' situations (clear cmos button pushed in every possible ways -quick, long, quick etc..-, removing little by little everything but the very minimal least energy taxing setup; keyboard, cpu, video, motherboard; 1 ddr2 nearest cpu slot.. point).. NOTHING. Worst, i tried to boot with one of those elements missing.. exact same D-Bracket lightning from start to.. eternally (123 GREEN 4-nothing). Even tried to remove the little (cmos?) KTS lithium battery for a few hours -that could work sometimes with the old already ultra-sensitive amd/nforce2 chipset bioses problems, so i tried there too-?-; same 3 green lights and fans running and nothing else happening from there.. ((
Always the same; total dead boot as above. black screen. no possible access to even bios panel. ,(((
So my desperate questions, now: of course, the origin is obvious here; all happened "by my fault" when i tried 'too quickly' to 'hot-plugging' replace correctly the D-BRACKET plugs *without* switching off the power supply... all shut down suddenly when i put back correctly the usb& jdb1 headers... :( ;
- do you think there could be any possible last HOPES to recover the situation that i had missed (a well known situation in such d-bracket handling 'common' (?) connection error, a simple trick to try i had missed ??)
- do you think i FRIED something in the process on the motherboard ?? :( :(
- do you think it is 'only' the BIOS (fried????) ?? :( :(
- do you think i could have fried a specifical external key component in the process (not necessarily motherboard) : ddr2 modules, cpu, video card????? :( :(
- is my only solution is to send the motherboard to RMA (no other ways now) ???
please, don't hesitate to give me any possible hints to try to avoid the RMA process.
can i avoid it, right now?
is that possible to fry an whole board just with such a D-Bracket 'hot plug switch' (on a so far perfectly working -light- setup - no oc, little video card, etc) ???? :( :(
That is the only C2D Intel/ddr2 motherboard i have here around. No possibility to test elements by elements for precise error checking (cpu, ddr2 modules, video card or powersupply).
Only things i could check so far are;
- the power supply (aerocool 620W zeroDBA) ;
i tested it back on my old amd xp-m nforce2 setup.. always working apparently. NOT 'fried' so, apparently. but no way of course to test for exemple the special 8x8 (or 8x4) Intel ATX cpu connector on old xp-m motherboard. But power supply NOt fried at least, apparently -?
- the video card.
no way for me to really test the pci-e card on other motherboard around but.. i tried a very old PCI VGA card.. that one works on old setup.. and on P6N, no effect, doesn't improve the situation. So, not sure the new pci-e video card isn't fried.. but a new video card doesn't correct the dead boot problem.. (
No way for me to test the ddr2 or CPU directly though.
Do you think DDR2 or CPU could have been fried in the process too ???
or just, as i fear anyway, 'simply', the motherboard BIOS fried -??? :-(
Really, thx for any suggestions..
if there could be an 'hidden' trick i did not try yet to try to recover the (initially working perfectly!!! (( ) setup, WITHOUT engaging the motherboard RMA process (at least 2 or 3 weeks lost here to wait the return..online store etc..)....
please, suggest me.. ,((
i am *really* very sad of that stupid clumsy idea to want to 'enable' the D-Bracket.. all was working great so far.. and i lost all with just that stupid idea to try an hot plug bracket reconnection without switching off the power supply it seems.. can it be possible,sigh?? all seemed so stable before that, that i.. just lost my usual cautious just 3 sec too long it seems... :-(
Thanks in advance
hoping post not too long too, but i tried to expose the situation as precisely as possible; first time i ever had such a problem with a motherboard/system install.. that is quiet ironical knowing it was also the best and quickest/easiest easy going new built i ever had so far too.. till then ,( .. and all came from the 'helper' d-bracket 'luxury second hand possible boot helper diagnostic tool' checking in the end too, here.. really hoping i can avoid an RMA process.. and no other hardware elements (apart the motherboard?) could have been damaged in the process ? ,(((

hi, thx a lot for the quick answer. sorry for the length indeed (i did not know exactly how to describe the situation.. without omitting any later possibly important details).
Alas, i already tried that many times in following interesting asnwers on similar problems in old posts here; did NOTHING. ,(
But after your post, i tried it again, and removed for the remaining *hours* (6/8h?) the cmos battery as suggested again *too* so -pushed again the clear cmos button etc when battery out, then when in again, then replugging the powersupply etc; NOTHING better alas too. always same, no boot, black screen, no bios. ,(
Problem always the same, to sum up, for clarity:
power supply on => orange motherboard led is lightning up, motherboard on => green motherboard led is lightning up, cpu/video/case fans are working up as normal and.. that's all. nothing else forever. black screen. no signal. not a single chance to get again the bios setup screen.
another detail i omitted, maybe; keyboard lights are all lightnng up too.. and stay blocked in that state too. tested with 2 different keyboards, same. to shut down the leds, fans etc, only one solution, shut down the power supply button directly, at that stage.
right now, i test on barebone minimal system as recommanded too;
cpu, 1 dimm (closest cpu slot), video, keyboard. all rest disconnected.
i of course tried to reset the cmos with the 'magical red button' many times before, with power supply cable plugged out, pushed the button trying almost every possible way so far (quick, long, long sequences, short sequences etc etc)... changed NOTHING so far -is that thing working?? ,(. and right now, same after hours with cmos battery removed too. ,(
the d-bracket leds are always (now it is correctly plugged..) :
123 GREEN 4 (nothing)
"Testing RTC (real time clock)"
another 'interesting' detail is that; those leds are appearing IMMEDIATELY after the motherboard is switched on, from start (green led appearing on P6N). and it is staying as such till the end. nothing else. i tried to connect also the case speaker ; no bips, no sound signals at all too.
I also remind the system was WORKING like a dream during 5 days *before* i had that sudden TOTAL boot problem.... AND i touched almost nothing in the bios too all along, for initial security reasons too.. (i was concentrating on the software installs anyway right now, NOT on the oc side..). The ddr2 quick little change i did was also the ONLY change i tempted to simply test quickly some setting i already saw working without problem with that P6N and that kind of ram.. and it was working without problem so far too, so.. all the time idem. And it had been perfectly working for 3 days as such untouched from there; no problems at all (those memory modules have been seen on that motherboard largely at those specs, why i did that quick test anyway.. far under their possible max -micron chips). it was even working so well i forgot to put the setting back as default after that quick ram test.. so much it was stable too (even if i had not time to do real memtest test on that one - i did for many hours with the initial automatical default settings too, to check the ram quality, was perfect for many hours, so ok too, no bad ram initially too-; was so stable for all my XP software installs operations etc.. that i forgot it thereafter, to be true..why it stayed like that till that moment (incidently).. but i preferred to mention it 'just in case' though, yes. i also did not push at all the dimm voltages in the process, it was always far inside the specs at 2.05V to be exact -usual for that ram too up to those numbers easy for it. i did not push the ram voltages either so..).
The problem ONLY appears when i wanted to unplug the *initially* badly connected D-bracket headers so (inverted headers.. but that caused NO problems either so far too for the system stability.. only the LEDs were of course not working so far..) : i did the error to NOT switch off the power supply. :(
*then* immediately the system shut down... and above situation appeared. ,(
BUT all was working perfect before.. ram setting included so. ,((
So my simple questions now too ;
- do you know what means *exactly* the d-bracket message 'Testing RTC" (123 GREEN, 4 nothing).. initial bios problem, isn't it?? other ways to recover it now?? ,((
- is it a WELL KNOWN PROBLEM when we try to disconnect and replug too hastily the d-bracket headers without switching off the power supply (*my* main erorr here, it seems :( :( ) ????
... and of course, do you think it could have *fried* another key component (cpu, ram -?? why i reminded the setting, just in case-?-, video card? .. ) with that d-bracket initial disconnection error ... ,(
as i said, i have no secondary c2d/ddr2 motherboard here : no way to test the cpu and ddr2 modules on another motherboard to be sure too here. :( i absolutely can't know if they have been damaged or not, here.. :( :(
any other idea for the motherboard itself though ??? ,(
once again, thx a lot for any suggestions and precisions on that problem (is that a COMMON well known problem with the d-bracket, when we unplug and replug it without extrem care like i did -my main inattention error it seems.. mainly because all was so stable before too.. ((( - without shutting down the power supply/system FIRST ???? can it be possible 'only' that shut down all the system??? (( )
thx in advance again +

Is there a new bios coming for P6N SLI Platinum for E8400 ?

Hi everyone,
( My system specs are in the signature )
I have been thinking to upgrade my cpu to E8400, but after some time passing through the forums, internet and asking some of my friends, I have decided not to. This is because I have seen many people frustrated and trying get their E8xxx's working on their moboard with endless efforts because of the wrong information given in the CPU support list of P6N-SLI Platinum. Yet, I have seen that only a few people have managed to get it work but with risky, manual adjustments.
So here is my question, will there be a new bios for P6N SLI Platinum that will make E8xxx series post without any adjustments for the users that want to stick with their P6N SLI Plat.?

Please ask here:
http://ocss.msi.com.tw/

P6N SLI Platinum Won't Load Vista or XP

I trying to load an OS on a new build, but have run into an issue. The build went well, but the OS won't load.
While trying to load Vista (32bit) it says "Loading Operating System" and the progress bar goes all the way to the end but then never gets any further. It just sits there.
So, not being familiar with Vistas load I thought I would tried XP Home SP2. With this I am at least able to partition the drives and choose quick format but once it gets to 20% this too freezes.
So far I have gone into BIOS and chosen to load both safe defaults and optimized defaults, which makes no difference. I have also tried removing one or the other of the memory sticks, again no help.
Here is the system particulars.....
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX MB
Intel Core 2 Duo E6600 2.4GHz 775 Processor
Antec Truepower Trio 650w PSU
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
1 - Western Digital Caviar 200GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - Western Digital Caviar 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - GIGABYTE GeForce 7300GT 256MB GDDR2 PCI Express x16 Video card
1 - DVD drive
1 - Sony Floppy
Everything is brand new. Any help would be greatly appreciated

Quote
Regarding Dual Channel Mode:
Am I reading the manual wrong? In the illustration it shows 4 DIMMS, the closest to the CPU being DIMM1, followed by DIMM3 (which are yellow), then DIMM2 and lastly DIMM4 (which are orange), and it states that in order to take advantage of dual channel to place the memory in DIMMS 1 & 2 and/or DIMMS 3 & 4
Sorry. I did not realize MSI relabeled the DIMMs. You are right of course.
[CPU] - DIMM1 - DIMM23 - DIMM32 - DIMM4
[CPU] - SLOT1 - SLOT2 - SLOT3 - SLOT4

P6N SLI Platinum SATA Support

Similar Messages

Maybe you are looking for