P6N SLI Platinum won't boot from XP CD after setting up striping RAID in BIOS

Hi,
I have tried fixing the boot order to CD, then RAID and vice-versa, no luck. My goal is to boot from the XP CD and press F6 to load the Windows RAID drivers from a floppy. Here is what I see:
It goes past the splash screen, detects the healthy array, tells me that the Sil bios is disabled, goes to the splash screen again, then goes to a flashing cursor on a black background. From there a Ctrl-Alt-Delete does nothing. I have to hit the restart button.
There are two Seagate 320GB drives on SATA1 and SATA2 (Index 0 and 1) in the RAID config.
Thanks in advance!

Quote from: WorkAtHomeParadise.com on 22-July-07, 05:31:27
Fixed it!
I had not enabled the SATA3 port (CD/DVD drive) for RAID in the BIOS. While it is not part of the RAID, it apparently needs to be enabled in order to function in a RAID configuration.
Booooyah!
Congratz.
Easier when people fix their own problems.

Similar Messages

P6N SLI Platinum Won't Load Vista or XP

I trying to load an OS on a new build, but have run into an issue. The build went well, but the OS won't load.
While trying to load Vista (32bit) it says "Loading Operating System" and the progress bar goes all the way to the end but then never gets any further. It just sits there.
So, not being familiar with Vistas load I thought I would tried XP Home SP2. With this I am at least able to partition the drives and choose quick format but once it gets to 20% this too freezes.
So far I have gone into BIOS and chosen to load both safe defaults and optimized defaults, which makes no difference. I have also tried removing one or the other of the memory sticks, again no help.
Here is the system particulars.....
MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX MB
Intel Core 2 Duo E6600 2.4GHz 775 Processor
Antec Truepower Trio 650w PSU
G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
1 - Western Digital Caviar 200GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - Western Digital Caviar 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
1 - GIGABYTE GeForce 7300GT 256MB GDDR2 PCI Express x16 Video card
1 - DVD drive
1 - Sony Floppy
Everything is brand new. Any help would be greatly appreciated

Quote
Regarding Dual Channel Mode:
Am I reading the manual wrong? In the illustration it shows 4 DIMMS, the closest to the CPU being DIMM1, followed by DIMM3 (which are yellow), then DIMM2 and lastly DIMM4 (which are orange), and it states that in order to take advantage of dual channel to place the memory in DIMMS 1 & 2 and/or DIMMS 3 & 4
Sorry. I did not realize MSI relabeled the DIMMs. You are right of course.
[CPU] - DIMM1 - DIMM23 - DIMM32 - DIMM4
[CPU] - SLOT1 - SLOT2 - SLOT3 - SLOT4

MSI P6N Sli Platinum won't Post with E8500

Ok, I've been pulling my hair out on this one off and on for a couple of weeks, and I figured I'd finally just post here and hope for some advice.
I recently bought a C2D E8500 CPU on newegg to replace the E6420 I currently have running in my system. The motherboard is a P6N SLI Platinum with the v1.7 Bios. The problem is that whenever I swap the E8500 in for the E6420 the computer powers on, fans start spinning, and then it just sits. No beeps, no lights, nothing. When I put the E6420 back in the whole thing boots up just fine. I've cleared the CMOS two different ways (removing the battery and hitting the CMOS reset button), and nothing seems to help. I have tested the CPU in another machine, and it works just fine. The MSI tech support has told me that the problem shouldn't be happening, and has suggested that I RMA the board to them. I'd rather not be without my computer for 3-4 weeks, so I figured I'd post here and see if anyone had any advice before I pull the whole system apart and send the MB in.
PSU is a 700W OCZ
Graphics Card is EVGA 9800GT 512MB
Ram is 4GB AData
Let me know if anyone sees any obvious problems.
Tim

I please have a look here:
https://forum-en.msi.com/index.php?topic=123486.msg932471#msg932471
Sending the board to MSI to be serviced is probably your only option to solve this.

K9A2 Platinum-Won't boot from optical drives

My problem is that I can't get my computer to boot from either optical drive.Both drives work; I can read and write from either drive in windows xp. In the boot order menu neither drive is shown as a boot from device.The boot sequence menu shows all hdd and usb devices but no optical drives.Both drives are recognized in the bios.I wanted to dual boot vista x64 but can't because it won't boot from drive.Any ideas?
QuadCore AMD Phenom Black Edition 9850, 2500 MHz (12.5 x 200) MSI K9A2 Platinum (MS-7376) OCZ Reaper HPC OCZ2RPR10662G 2 GB DDR2-800 DDR2 SDRAM ATI Radeon X1800 GTO (256 MB) WDC WD2500KS-00MJB0 (232 GB, IDE)WDC WD5000AAKS-00A7B0 (465 GB, IDE) Microsoft Windows xp SP 3 Cooler Master 650W+3.3V@28A,+5V@30A,+12V1@18A,+12V2@18A,[email protected], [email protected]

Create a signature with PC components and PSU specs.
Example of PSU specs: Corsair VX450W, +3.3V~20A, +5V~20A, +12V~33A
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile", what I show in red below under "Modify Profile", scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options

K9N2 Sli Platinum - won't boot? Can't figure out problem.

Hey guys. My computer practically crapped itself the other day, and there were so many symptoms I'm not quite sure
what to even search for.
I've had this computer for about a year now. no problems since the day i built it.
specs:
Msi K9n2 Sli Platinum mobo
AMD Athlon 64x2 3.2 Ghz
2x BFG Nvidia Geforce 9800 GTX+
2x Cosair xms2 2gb ddr2
1000 watt BFG EX Series
Sony DvD drive
1tb western digital drive
So i was playing SC2 and my computer froze. So i restarted and it hung during windows loading.
I turned it off waited a few seconds and started... still hung. Cycled it and tried a couple more times.
Still nothing. Naturally i assumed it was a virus so i repaired my windows installation. After it finished it hung on
Windows has finished repairing your computer will now restart. I waited about an hour and decided to just restart
myself. Next time it booted asked me if i wanted to boot from cd and then it just shutdown like i pulled the plug.
Then i thought well i ruined my windows install. I tried booting again it did the same thing. So i just said screw it
ill reformat. But this time there was no signal from my graphics card. When i turn the computer on it will normally
be loud and then get quiet after everything has booted. But now it just turns on and stays loud because i suspect
it's still booting. So i took everything apart. Tried connecting and unconnecting everything. moving ram etc...
Ive got it to boot twice but after that it crashes before windows loads like a plug pull and it wont boot again.
I cant tell whats wrong it could be everything but nothing makes sense. I've built about 7 or 8 computers.
gotten rid of several viruses and bad hardware but I've never seen anything like this.
I tried checking the LED codes for the board. Leds 11 and 10 and 9 and 8 alternate red and green which means HDD and floppy drive are trying to boot.
but it does that even when my harddrive is not connected and it still wont show video. Ive even rotated the graphics cards and tried a 7900gs. nothing.
Edit: now led 6 and 7 are red.
please help me out. Thanks.

Yeah the case i have is the antec 1200. Never had a problem with heat before.
Ive tried it with just the ram and the cpu and it still gives me the lights so i
guess it must be the mobo or processor. I don't have another motherboard to test everything else on
all my other pcs are 5 to 7 years old.
I was thinking about keeping all my old parts and buying these as replacements:
MSI NF980-G65 AM3 NVIDIA nForce 980a SLI HDMI ATX AMD Motherboard
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 140W Quad-Core Processor
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL

K8N SLI Platinum Won't boot...

Hello!
Yesterday i got my computer parts, i slowly assemblied it and read all the instructions.
The parts was:
MSI K8N SLI Platinum
AMD Athlon 64 3500+ 2.2GHz Socket 939 (Boxed)
Asus GeForce 7800GT 256MB GDDR3 2xDVI-I
Corsair TWINX Xpert 3200C2 DDR 1024MBC
Tagan 420W PSU(I didn't get any info from the reseller about me needing atleast 450W, but it booted so im happy)
Samsung SpinPoint P120S 250GB SATA2.
It booted and i was happy, i installed all drivers from the cds and installed a game and it ran smooth.
I looked up on nvidia.com and saw that there was a newer driver for my graphics card so i downloaded them and got asked to reboot my computer and so i did.
But it didnt get any further than the re, since it didn't boot up...
All the fans are running in the computer, the memory display started and displayed info.
The screen was dead and by pressing numlock repeatedly on my keyboard i noticed it didn't work either.
I've tried to change spot on both the SATA disc and the Graphics Card. I've tried to reset cmos by holding the button.
And now im out of ideas
Thanks in advance /Hugge

Quote from: SAB on 17-September-05, 19:44:06
If you have your D-Bracket connected, what light pattern is it displaying!? Also, recheck your physical SATA connectors, as they have a tendency to back out.
I had it at first, but when i moved my gfx-card i removed it.. Should i connect it again?
Edit: Ok now i saw what use it has, i will connect it and i'll be back in a few..

Won't boot from install discs after deleting some system files

I've been looking through the forum and haven't found an answer to my problem - maybe someone can help me out.
I have an aluminum Powerbook G4, 1.67, 1.5 RAM, 10.4.11. I was experiencing the problem with FCE capturing video for about 5 minutes and then freezing, and I read some threads here about how this can be fixed by returning to Quicktime 7.2 and installing it with Pacifist. I did this, but first tried to delete my previous Quicktime version files, and obviously I deleted some system files in the process. That's how my new problem started.
Programs now that do not open - Preview, iTunes, iMovie, FCE, Yahoo, Mail, and Microsoft Messenger. I no longer have my date/time/battery level/airport/bluetooth indicators in my toolbar. The Spotlight icon flashes, but will not open. Also, when opening the System Preferences pane, it opens just for a second or two and then crashes and closes. Safari, airport, and Word all work, though, and I still can access internet.
I tried to re-install OS 10.4 from my black install disc. The computer reads the disc, but after I click the installer icon and then "restart," the computer fails to completely reboot. The disc spins in the drive, I get the Apple, the indicator, and then the screen goes to blue and the disc soon stops spinning. Nothing happens after that. I've tried rebooting by holding down the C key but the same happens. When I hold down the option key, I get to the point where I can choose to boot from the install disc, and then the same thing happens - the blue screen and nothing more. Booting with the shift key held down doesn't work either.
I did just have a repair by Apple - my adaptor plug sparked when inserting it into the outlet, and I had to have the logic board replaced. But the computer seemed to be working fine when I got it back, except for the FCE issue first mentioned. Looks like my good intentions have done me in.
The install disc is about three years old, and is in good condition. It's been in the garage, so could heat or cold affect the readability of the disc?
Does anyone have any suggestions on how I can boot from my install disc and get a fresh install of my OS?

Hi bboross,
Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot , (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.

K8M Neo-V won't boot from hard drive after BIOS flash

But it boots just fine from CD or floppy.
I bought the combo (MB, AMD64 processor, 1G memory) to replace a
motherboard which had died in a previously working system. At the
same time I replaced the power supply and the video card. When I first
fired it up, it brought up the boot manager from the previous incarnation
of the system, which had been an Athlon-XP.
I never actually let it reboot, since I wanted to redo the OS optimized
for the AMD64 (and the new video card.) I flashed the motherboard to the
most current version of the BIOS (AMI version 3.5), booted from CD and
installed the OS. Once I got to the point of being able to boot from the
new system, I removed the CD and proceeded to reboot.
It displayed all the possible boot devices (note that the floppy and CD
were empty):
Searching for Boot Record from floppy..not found
Searching for Boot Record from CD/DVD..not found
Searching for Boot Record from IDE-0..not found
No matter what I did, I couldn't get the system to boot from the hard
drive. I reflashed the BIOS back to 3.2, still didn't work. Since then I
have installed four different operating systems: Win2k, WinXP, Gentoo
Linux and Debian Linux. All boot from CD, install perfectly until you get
to the part where the system has to boot on its own, and then nothing.
Has anyone seen this? Is it possible that there is a problem with how
I've set the BIOS up? Or a hardware conflict with something else? Or
just a bad MB?
Thanks for any advice.
Steve

Notihng special in the BIOS drive setup. Everything is auto-detected and I've pretty much left those settings alone. At the time of the first flash I probably *did* have SMART enabled. Once I started having trouble I turned that off, and have never turned it back on.
Boot order has been changed multiple times. Right now it is floppy -> cd -> ide-0. I've turned the network boot option off and on again (not that there's a boot server handy...) I've tried hitting F11 to choose my boot device and specifically selected the HD. Hasn't made any difference.
I generally turn virus protection off the moment I get a new motherboard. I'm pretty sure it came disbaled by default, if not I'm sure I disabled it. Even had it been on, though, any boot block corruption would have to be permanent damage to act like it has, since four subsequent OS installs should have overwritten the boot block four times over.
It might be worth my time to drop a different HD in the primary master slot and see if it can boot from that. I'll be real unhappy if I've toasted a perfectly good drive.

P6N SLI Platinum beeps on boot up (error codes?)

I'm assuming these are beep codes, but instead of short/long, they are high/low tones.
H: High
L: Low
HH *short pause* HHLL *short pause* HHL

No real issues that I'm aware of besides this, but my system runs fine. Was more of curiosity as to what the beeps were for. I couldn't find any information on them in the manual or on the MSI website. But perhaps I didn't look hard enough.

P6N SLI Platinum crashes from cold boot

Intel Core 2 Duo E6420, 2.13GHz, 1,066FSB, 4MB
Zalman CNPS9500-AT Intel LGA775 Aero Flower Cooler
MSI P6N SLI Platinum
Neste ECS 6001 600 watts PSU (3.3V/24A, +5V/30A, +5VSB/3A, +12V1/18A, +12V2/18A, +12V3/18A, +12V4/18A, -12V/0.5A)
2 x 1GB Crucial PC2-5300 Non ECC CL5
XFX GeForce 8600GTS 256MB DDR3 PCIe (PV-T84G-UDF3)
1 x Western Digital Caviar 160GB 7200rpm, S300, 16MB SATA (system disk)
3 x Western Digital Caviar 500GB 7200rpm, S300, 16MB SATA (data disks)
BIOS – 1.1 updated to 1.5, default settings (I'm not overclocking)
Windows XP SP2 OEM
I installed the above system last summer and have been having problems ever since. Initially the video signal dropped after booting so I replaced the graphics card. This didn’t work so I replaced the MOBO. All was OK for a while then the system started crashing for no apparent reason but would usually be OK for a while after re-booting. Then it failed to boot into Windows at all. I checked the BIOS and noticed that the Smart Fan setting in the H/W Monitor had disabled itself somehow (I had set it to be enabled with a target temperature of 40OC). I re-enabled the setting and was able to boot into Windows OK. However it still crashes every time from a cold boot (the CPU fan comes on full speed for a few seconds then the computer just shuts down). After a few re-boots it settles down and seems to be fine.
I’m assuming the problem is something to do with CPU temperature but in the BIOS H/W monitor the system and CPU temperatures are never above 30 to 35OC. As the system seems to be perfectly stable once it’s been re-booted a few times it doesn’t seem that the CPU is actually overheating. I’ve tried setting the CPU target temperature higher (say to 60 OC) but still get the same cold boot crash. Note that the MSI Dual Core Centre utility in Windows shows the same CPU and system temperatures as the BIOS monitor (although the GPU temperature is much higher at 60 OC).
Any suggestions for solving this would be much appreciated.

I'm not familiar with your brand of ps. Have you tested the rails while the system is running using a digital voltage meter?

[P6N SLI Platinum] black screen NO BOOT after D-bracket replug [RMA-SOLVED]

Quick setup specs;
P6N SLI Platinum
E6600 (box/stock 2400mhz basic)
2x 1Gb DDR2 6400 Gskill HZ
Sapphire ATI X1600Pro (PCI-e basic)
Aerocool Zero DBA 620W
(2 HDs sata, 2 Hds pata, 2 optical pata at first -all OK at first, disconnected after, so irrelevant here ,( )
(XP Pro clean new install from start)
I tried to check the forum old posts before trying to write that new one, but could not find any really related totally adequate posts so far (or i missed them, sorry if so, then -?). I could already find very useful informations on first aid usual 'rebooting' procedures to follow with minimum new boot configurations, d-bracket new LED signals etc. But so far no luck, all same, nothing better, nothing cured here for the stuation here. ,(( Also excuse my english if not perfect, i am not english either. ,(
VERY bad & sad problem here... ,(((( :
All was working perfectly great during 5 days.. the P6N SLI platinum install went GREAT initially (as normal, not a first pc built, all normally happening, so far so good, etc).... all hardwares compatible together at first (dedicated ATX 'full' 8x8 pins connector too for the cpu only for ex -all working perfect at first try. quick tensions 5V/12V under msi dual core control tool perfect too etc), was great easy going/ great strong ultra-stability feeling on the hardware side.. i was just now concentrating on the software side (no special BIOS tweaks even attempted so far, all on basics-normal e6600/ddr2 auto-settings, apart at the end ddr2 quick test -when problem occured- on 450(900?)Mhz at 2.1V, far far easy under its possible specs max anyway.. and had been working perfect for 3 days with that little ddr2 boost try -no time for special bios further tweakings now, etc), reinstalling and transfering/reorganizing slowly my necessary files/hds/softwares from old to new setup, no oc, nothing special tempted (i was planning oc, new cpu more suited fan/silver6 etc only for the end..), LAN file sharing setup done, Realtek audio setup test done, etc ; installation had been so far one of the quickest and problem free ever... explaining maybe also my fatal lack of cautioun for just (too much) 3 sec in the end after 5/- days of perfect working new ring going on.. ,((( :
At first, i also tried to immediately install the D-Bracket too to check possible hardware install problems -very useful feature i of course thought too..and wanted to try too, "in case of"..- (installing it from quick reading of the printed manual..with no colour pic coding inside..and quick error coming from there thereafter with an initial mismatch usb/jbd1 inverted plugs connections.. *both* having the exact same pins numbers and dispositions, beeing side by side on mainboard layout.. and so able to connect both headers indifferently.. so i did not see it immediately (( .. and no way to see it otherwise as such, anyway.. ,( ), just to be sure all was ok. I noticed that LED were of course, never lightning (not normal).. but as EVERYTHING else was working fine (GLAN, sound, etc etc).. i did not bother more than that -- error checking not necessary.
Till that fatal clumsy day i wanted suddenly to.. check the D-bracket too. ((((
All was working well, XP pro opened for hours as usual etc..
i had not yet totally finished to install the motherboard in the pc-case (always on desk, free in sight..)... so i could always see the connections on it. ... and i noticed that ... the colour headers codes were NOT matching (usb=yellow..).. i had just stupidly initially badly connected the D-Bracket jdb1/usb adjacent plugs (inverting them), so... And still, all had ever worked perfect.. except the D-Bracket, of course, was sending back no lights then, obviously.. so i did the fatal error.. confident all was stable enough and strong if even that initial plug error had had no consequences at all.. i did the fatal bad move to try to UNPLUG the D-Bracket connectors and put them back in right orders WITHOUT switching OFF the power supply so... like an hot USB plug, sort of, in a way. fatal error.. :( :( :(
As soon as i began to remove the usb/jdb1 connectors and put them back in normal order... the system suddenly SHUT DOWN ... no special bad noise, no special smell.. just sudden SHUT DOWN.
From there.. impossible ever to boot back again the so far perfectly working machine (((((((((((( , always same till now :
i switch on the power supply.. orange led appears on motherboard (ok)... i switch on the motherboard.. green led on motherboard appears (ok)... CPU fan begins (ok), video fan begins (ok) .... and... NOTHING.. total black video screen. no more even possibility to see the BIOS. :( total dead startup .. and the fans are going on eternally, blocked eternally in that inital startup with leds on too (no sudden shut down after a few seconds.. just.. nothing)... :(
Suprem irony.. the D-bracket LED seems to 'work' now.. "of course". Just the PC no more booting at all ^. Only thing is that only green LEDs are appearing, no red ones... simply the sequence, from start and never changing :
1. GREEN 2. GREEN
3. GREEN 4. (---) (not red, just nothing -?)
If i look in manual, it means "Testing RTC (real time clock)". I don't know exactly what it means *here*, but sounds to me it is the most basic initial first BIOS checking.. and BIOS can't be reached for even that so ; BIOS fried???? :( :(
I tried every 'standard' things recommanded usually here in older posts, for new boots recovery attempts thereafter in such 'boot errors' situations (clear cmos button pushed in every possible ways -quick, long, quick etc..-, removing little by little everything but the very minimal least energy taxing setup; keyboard, cpu, video, motherboard; 1 ddr2 nearest cpu slot.. point).. NOTHING. Worst, i tried to boot with one of those elements missing.. exact same D-Bracket lightning from start to.. eternally (123 GREEN 4-nothing). Even tried to remove the little (cmos?) KTS lithium battery for a few hours -that could work sometimes with the old already ultra-sensitive amd/nforce2 chipset bioses problems, so i tried there too-?-; same 3 green lights and fans running and nothing else happening from there.. ((
Always the same; total dead boot as above. black screen. no possible access to even bios panel. ,(((
So my desperate questions, now: of course, the origin is obvious here; all happened "by my fault" when i tried 'too quickly' to 'hot-plugging' replace correctly the D-BRACKET plugs *without* switching off the power supply... all shut down suddenly when i put back correctly the usb& jdb1 headers... :( ;
- do you think there could be any possible last HOPES to recover the situation that i had missed (a well known situation in such d-bracket handling 'common' (?) connection error, a simple trick to try i had missed ??)
- do you think i FRIED something in the process on the motherboard ?? :( :(
- do you think it is 'only' the BIOS (fried????) ?? :( :(
- do you think i could have fried a specifical external key component in the process (not necessarily motherboard) : ddr2 modules, cpu, video card????? :( :(
- is my only solution is to send the motherboard to RMA (no other ways now) ???
please, don't hesitate to give me any possible hints to try to avoid the RMA process.
can i avoid it, right now?
is that possible to fry an whole board just with such a D-Bracket 'hot plug switch' (on a so far perfectly working -light- setup - no oc, little video card, etc) ???? :( :(
That is the only C2D Intel/ddr2 motherboard i have here around. No possibility to test elements by elements for precise error checking (cpu, ddr2 modules, video card or powersupply).
Only things i could check so far are;
- the power supply (aerocool 620W zeroDBA) ;
i tested it back on my old amd xp-m nforce2 setup.. always working apparently. NOT 'fried' so, apparently. but no way of course to test for exemple the special 8x8 (or 8x4) Intel ATX cpu connector on old xp-m motherboard. But power supply NOt fried at least, apparently -?
- the video card.
no way for me to really test the pci-e card on other motherboard around but.. i tried a very old PCI VGA card.. that one works on old setup.. and on P6N, no effect, doesn't improve the situation. So, not sure the new pci-e video card isn't fried.. but a new video card doesn't correct the dead boot problem.. (
No way for me to test the ddr2 or CPU directly though.
Do you think DDR2 or CPU could have been fried in the process too ???
or just, as i fear anyway, 'simply', the motherboard BIOS fried -??? :-(
Really, thx for any suggestions..
if there could be an 'hidden' trick i did not try yet to try to recover the (initially working perfectly!!! (( ) setup, WITHOUT engaging the motherboard RMA process (at least 2 or 3 weeks lost here to wait the return..online store etc..)....
please, suggest me.. ,((
i am *really* very sad of that stupid clumsy idea to want to 'enable' the D-Bracket.. all was working great so far.. and i lost all with just that stupid idea to try an hot plug bracket reconnection without switching off the power supply it seems.. can it be possible,sigh?? all seemed so stable before that, that i.. just lost my usual cautious just 3 sec too long it seems... :-(
Thanks in advance
hoping post not too long too, but i tried to expose the situation as precisely as possible; first time i ever had such a problem with a motherboard/system install.. that is quiet ironical knowing it was also the best and quickest/easiest easy going new built i ever had so far too.. till then ,( .. and all came from the 'helper' d-bracket 'luxury second hand possible boot helper diagnostic tool' checking in the end too, here.. really hoping i can avoid an RMA process.. and no other hardware elements (apart the motherboard?) could have been damaged in the process ? ,(((

hi, thx a lot for the quick answer. sorry for the length indeed (i did not know exactly how to describe the situation.. without omitting any later possibly important details).
Alas, i already tried that many times in following interesting asnwers on similar problems in old posts here; did NOTHING. ,(
But after your post, i tried it again, and removed for the remaining *hours* (6/8h?) the cmos battery as suggested again *too* so -pushed again the clear cmos button etc when battery out, then when in again, then replugging the powersupply etc; NOTHING better alas too. always same, no boot, black screen, no bios. ,(
Problem always the same, to sum up, for clarity:
power supply on => orange motherboard led is lightning up, motherboard on => green motherboard led is lightning up, cpu/video/case fans are working up as normal and.. that's all. nothing else forever. black screen. no signal. not a single chance to get again the bios setup screen.
another detail i omitted, maybe; keyboard lights are all lightnng up too.. and stay blocked in that state too. tested with 2 different keyboards, same. to shut down the leds, fans etc, only one solution, shut down the power supply button directly, at that stage.
right now, i test on barebone minimal system as recommanded too;
cpu, 1 dimm (closest cpu slot), video, keyboard. all rest disconnected.
i of course tried to reset the cmos with the 'magical red button' many times before, with power supply cable plugged out, pushed the button trying almost every possible way so far (quick, long, long sequences, short sequences etc etc)... changed NOTHING so far -is that thing working?? ,(. and right now, same after hours with cmos battery removed too. ,(
the d-bracket leds are always (now it is correctly plugged..) :
123 GREEN 4 (nothing)
"Testing RTC (real time clock)"
another 'interesting' detail is that; those leds are appearing IMMEDIATELY after the motherboard is switched on, from start (green led appearing on P6N). and it is staying as such till the end. nothing else. i tried to connect also the case speaker ; no bips, no sound signals at all too.
I also remind the system was WORKING like a dream during 5 days *before* i had that sudden TOTAL boot problem.... AND i touched almost nothing in the bios too all along, for initial security reasons too.. (i was concentrating on the software installs anyway right now, NOT on the oc side..). The ddr2 quick little change i did was also the ONLY change i tempted to simply test quickly some setting i already saw working without problem with that P6N and that kind of ram.. and it was working without problem so far too, so.. all the time idem. And it had been perfectly working for 3 days as such untouched from there; no problems at all (those memory modules have been seen on that motherboard largely at those specs, why i did that quick test anyway.. far under their possible max -micron chips). it was even working so well i forgot to put the setting back as default after that quick ram test.. so much it was stable too (even if i had not time to do real memtest test on that one - i did for many hours with the initial automatical default settings too, to check the ram quality, was perfect for many hours, so ok too, no bad ram initially too-; was so stable for all my XP software installs operations etc.. that i forgot it thereafter, to be true..why it stayed like that till that moment (incidently).. but i preferred to mention it 'just in case' though, yes. i also did not push at all the dimm voltages in the process, it was always far inside the specs at 2.05V to be exact -usual for that ram too up to those numbers easy for it. i did not push the ram voltages either so..).
The problem ONLY appears when i wanted to unplug the *initially* badly connected D-bracket headers so (inverted headers.. but that caused NO problems either so far too for the system stability.. only the LEDs were of course not working so far..) : i did the error to NOT switch off the power supply. :(
*then* immediately the system shut down... and above situation appeared. ,(
BUT all was working perfect before.. ram setting included so. ,((
So my simple questions now too ;
- do you know what means *exactly* the d-bracket message 'Testing RTC" (123 GREEN, 4 nothing).. initial bios problem, isn't it?? other ways to recover it now?? ,((
- is it a WELL KNOWN PROBLEM when we try to disconnect and replug too hastily the d-bracket headers without switching off the power supply (*my* main erorr here, it seems :( :( ) ????
... and of course, do you think it could have *fried* another key component (cpu, ram -?? why i reminded the setting, just in case-?-, video card? .. ) with that d-bracket initial disconnection error ... ,(
as i said, i have no secondary c2d/ddr2 motherboard here : no way to test the cpu and ddr2 modules on another motherboard to be sure too here. :( i absolutely can't know if they have been damaged or not, here.. :( :(
any other idea for the motherboard itself though ??? ,(
once again, thx a lot for any suggestions and precisions on that problem (is that a COMMON well known problem with the d-bracket, when we unplug and replug it without extrem care like i did -my main inattention error it seems.. mainly because all was so stable before too.. ((( - without shutting down the power supply/system FIRST ???? can it be possible 'only' that shut down all the system??? (( )
thx in advance again +

P6N SLI Platinum not booting after CPU change

I just upgraded the CPU in my machine with a P6N SLI Platinum motherboard from a E6700 to an E8500. I first upgraded the BIOS to 1.7 as the MSI page seemed to indicate that was a pre-req for this CPU. The machine was working fine for a day with the new CPU.
I changed the CPU in the machine and when I tried to boot, the lights on the motherboard came on as well as the fan, but no video or sound. In addition none of the diagnostic LEDs on the D Bracket light up. They had been previously working. Neither do the lights on my memory sticks light up.
I tried clearing the CMOS by hitting the switch but nothing. I am now going to try switching back CPUs but I don't have much hope that that is the problem given the diagnostic LEDs don't light. Does anyone have any suggestions as to a fix or is this motherboard fried?
P.S. Do you hit hte CMOS clear switch when the computer is off but the motherboard is charged? Or do you unplug the computer and wait for the internal orange light to go out as well too?

Quote from: Henry on 24-January-10, 11:41:19
What is the QC number (by the cpu socket) is 01, 02, or 03?
See this thread for more:
https://forum-en.msi.com/index.php/topic,123486.msg932471.html#msg932471
Ah. Given I bought my P6N SLI Platinum 3.5 years ago when they first came out I imagine mine is one of the older versions that doesn't support 45nm CPUs by default. Is there a photo somewhere showing where the QC number is located exactly on this MB? It's probably located under my huge CPU heatsink and I'm not going to remove that for a third time just to check.
I really wish the MSI CPU compatibility page mentioned that. It would save me a lot of time. It's not worth my time and effort to dismantle my PC, send them the MB and wait for them to send me back a compatible one.
I verified the BIOS upgrade by looking at the version number at startup and using CPUZ.

P6n sli platinum cannot boot up

Hello
Everytime I boot up the D bracket suggests the computer is failing on initializing the floppy drive controller. i have changed the cable, and changed the floppy drive but same effect.
In the BIOS, if I go through and F10 for no save and exit, it then exits to bank screen as it fails at the point above. If i make any changes in the BIOS, and then try to accept those changes it freezes on pressing either Y or enter. At that point all I can do is turn off and start again. Naturally it doen't retain those changes. I have done this several times to disable the floppy.
I have removed the battery and put it back, (It's 16 months old). It then did allow me to disable floppy but still machine did not go beyond the above point. Whenever I have tried to go back into the Bios again, it will now freeze when I try and accept any change in settings.
As you will see I am unable to even boot from a floppy at this point so cannot een consider updating the BIOS. However before yesterday it has been working perfectly.
Any suggestions, or the loan of an axe to reprogramme the ****** thing would be much appriecated.
Thank you
Malcolm
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago

Quote from: yokochanie on 03-October-08, 13:55:28
Motherboard P6N SLI Platinum, G52-73501x1-Q05
2.20.0050.10 BIOS verison
Intel Core 2 Duo Processor
Sony MPF920 floppy
4 Harddrives. Boot is IDE, then 3 others, one of which is sata
2 memory sticks, 2 gb ram
Plexwriter CD
Pioneer DVDRW 105
Pioneer DVD
DMX-6fire soundcard
HD620W power supply
full details not known as mostly stored on the computer
No faults on system since it was built 16 months ago
"2 memory sticks, 2 gb ram"
That doesn't talk much, we need full details about it.
"Intel Core 2 Duo Processor"
Which one?
"2.20.0050.10 BIOS verison"
That's not your BIOS version, look here how to check==> https://forum-en.msi.com/index.php?topic=113146.0
What VGA you use?
Remove power cord from the PSU and leave just one memory stick in 1st DIMM, once done proceed with >>Clear CMOS Guide<<
Then try to boot, if no change disconnect any storages{4 HDD's, 3 Optical drives, and any USB devices which you may have attached} and re-test.

COMIC BOOTING on P6N SLi Platinum

I run P95 stable for more than 12hrs using Q6600 on P6NSLi Platinum with foll. settings. vcore- +0.2375V, fsb vtt +20% FSB 1620MHz MEM - 2.00V NB- 1.45V SB- 1.60V C1E/ HPET/ EIST -disabled. Mem runnin @ 810MHz @5-5-5-18
problem arises when i switch off the power including the mains. when i boot up next time it doesnt boot & i have to reset my bios. after that i cant directly feed in 1620MHz because it doesnt boot in the range of 1500MHz-1649MHz in 1st attempt. i have to feed in a value above 1650MHz n then restart with 1620MHz. if i dont switch off mains then this problem doesnt arise. i have changed my BIOS battery to no effect.i also have flashed to d latest BIOS which on d contrary has added 1 more problem..it doesnt recognise Multipiers if i change them..i changed from 9 to 8 on my Q6600 & still in d settings including CPU-Z it shows 9 inspite showing 8 in BIOS. how do i solve this problem?
My rig
Intel Q6600, MSI P6N SLi Platinum, 1gb*4 gskill pc6400 ram @ 5-5-5-15 2.0v, EVGA 9600Gt ko version, 1sata, 2 ide hdds, sata dvd burner, TRUE120 wid arctic coolin mx-2

I should also state that when I look at the 'Event Viewer' in component services (I'm running XP SP 2),there are many erropr messages relating to 'service control manager which lists all sorts of issues) and warning messages relating to the DHCP.
This is the message that I get under the warning heading..........
''Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 00D09EC701E2. The following error occurred:
The semaphore timeout period has expired. . Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. ''
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp................
Does this help in any way. Does anyone have any idea why my connection keeps hanging???

MediaShield RAID 5 implementation on a P6N SLI Platinum plus boot question

Hi guys
I have a P6N SLI Platinum I am considering using to replace my old decrepit Thecus N4100+ NAS enclosure. My NAS has four 750Gb SATA II drives in RAID 5 giving a total usable amount of about 2Tb.
I have a few questions please:
What is the maximum size RAID that MediaShield will support? I seem to recall reading somewhere it was 1.6Tb? This is a problem with 3Tb storage (1/4 redundancy)!!
What is the performance like running RAID 5? What are the read/write times like?
How much of a performance hit does the PC take running RAID 5 with MediaShield? This box has an E5500 quad core 4*2.8Ghz chip but is running some very hungry software (one build is a DAW based on Cubase and various VSTs; another is running Photoshop CS3) which I can't afford to be tied up sorting out low level RAID stuff if it's going to be a problem. Can I dedicate one of my four cores to the XOR for the RAID 5 freeing up the other three for actual PC stuff?
There is currently one SATA drive already in this box containing the OS. If I use the four SATA ports for the MediaShield RAID and buy a 3rd party PCI/PCIE SATA controller card to plug this current drive into will I be able to set it to boot from it or do I need to migrate the drive to an IDE drive and put it on the IDE chain?
Many thanks in advance you guys.
Cheers

Where do I start?
I have a E5500, it's a dual core chip.
Second, media shield sucks. Don't use it unless absolutely necessary.
Buy a pci-e 1x 'firmware' card, I use the RocketRaid 2300 cards, good and cheap. Good, usable RAID5.
They have a performance advantage, a load time advantage, cpu utilization advantage, and most importantly, if you want to migrate your array over to another motherboard, you can. Easily.
If your mobo dies, and you replace it with a more current one, your array is toast with mediashield.\
Boot from a motherboard sata port. Don't boot from a RAID 5 array, trust me.
http://www.newegg.com/Product/Product.aspx?Item=N82E16816115029

P6N SLI Platinum won't boot from XP CD after setting up striping RAID in BIOS

Similar Messages

Maybe you are looking for