P6N Sli V2 Memory Problems

Hi All.
I have -
MSI P6N Sli V2 -1.2bios
Intel Quad Core q6600
3gig Crucial Ballastic Memory 6400 800mhz
MSI 8600gt 256mb
Vista 64 bit
2 gig works fine gets a rating of 5.0 on vista but when 3gig is installed 4.5 is my rating when this should be 5.9. Now by looking at other threads people where able to fix this out with a beta/newer bio's but i never saw anythin on the V2 board. I was unsure on which one i need to get so that why iam starting this as a way to get the correct bios so i can use all my memory at 800mhz and not 399mhz as told by CPUIZ!
Any Help is welcomed help!

Quote
CPUZ regonize memory at being 800mhz
Don't confuse memory type and memory speed. CPU-Z might have recognized your modules as DDR2-800 modules (and it most likely still does) but it is impossible that it told you that your RAM was operating @800 MHz (because that would equal DDR2-1600 MHz). Impossible.
Quote
or windows vista being its quailty amazing product that it is!
BINGO! Read here:
http://www.theinquirer.net/en/inquirer/news/2006/10/13/memory-upgrade-slows-microsoft-vista-right-down
The bottom line:
Quote
VISTA has rather an illogical performance rating tool.
Don't trust those ratings. You sleep better that way.
Quote
nother thing is that the FSB : DRAM ratio is 2:3 surely this should be 1:1?
No, if the ratio would be set to 1:1 your RAM would be operating @266 MHz [=DDR2-533].
2:3 equals 1:1.5, your CPU operates @266 MHz FSB clock speed, that means
266 MHz x 1.5 = 400 MHz [DDR2-800 MHz] memory clock speed.
BTW: If your memory really was operating at only half of its rated speed, your memory score would be a lot less.

Similar Messages

P6N SLI V2 performance problem

My computer
Mainboard: MSI P6N SLI V2
Processor: Intel E2180 Allendale
Memory: OCZ DDR2 PC2-6400 Special Ops 2GB
Graphics Card: Palit Geforce 8600GT DDR3 256MB
PSU Chieftec GPS-500AB-A (500 Watts)
Mainboard is set to work in non-SLI mode and LED indicates, that the card in PCI-Express slot works in x16 but the benchmarks says something a quite different. 3DMark 2005 says 5500 points, 3DMark 2006 - 3500 points, all tested games works slower that they should be on this type of computer. Computer runs on Windows XP SP2 with the latest drivers and DirectX libraries. I checked whether it is a graphics card's fault, but I used different 8600GT made by Galaxy, and the scores were identical. I borrowed this card from a friend, his gig is: Athlon X2 4000+ and Asus M2N-E SLI mainboard and his 3DMark scores are basically 60% higher than mine. I don't know what seems to be the problem, all temperatures (CPU, mainboard chipsets and GPU) are normal, so does voltage on all rails. Computer is fully stable, the only problem is this strange low performance...

Quote from: jason str on 29-August-08, 13:37:37
If your board has adjustments for the Northbridge chipset in bios try experimenting, i found that 600 mhz and 1.3 volts increased performance on my P6N diamond.
I've tried to overclock everything including processor, northbridge, memory and graphics card, the result is only about 100 points more, where I'm looking for like 1400 points more in 3DMark 2006 and whooping 4000 points in 3DMark 2005.
Quote
Be sure to run driversweeper in between driver changes too for best results.
http://www.guru3d.com/index.php?page=driversweeper
I'm using driversweeper everytime I change drivers. Even fresh Windows install gives me the same results...

P6N-SLi 650i RAM Problem

Hi guys,
I just bought an MSI motherboard - P6N-SLi with the 650i chipset and 430 southbridge. It's a nice motherboard - although that northbridge is pretty hot.
Anyway - I bought a gig of Ram for it too - 2x512Mb OCZ which I know to be some decent enough memory.
The problem is - on the first night whilst installing win xp - it froze. no BSOD - no restart - just froze. I tried again and it was fine. Once XP was installed etc - it began to freeze - totally lock up - every few mins. I had to restart every time. I ran stress tests in the new gfx card (nvidia 8800gts) which was fine. I checked temps and ran other tests and the CPU and PSU and HDDs were all fine.
I had my two sticks of RAM in DIMM 1 and DIMM 3 as the manual said. I then took these out and put them in DIMM 2 and 4. Works perfectly now.
Any ideas why - and if so - whether two more sticks in 1 and 3 would cause issues if I was to upgrade??
Should i send this mobo back? Is it faulty? Or maybe I am missing a BIOS update or setting?
Help is greatly appreciated. - I'm not a n00b, just stuck

Quote from: bobak2000 on 03-March-07, 10:04:31
I had my two sticks of RAM in DIMM 1 and DIMM 3 as the manual said. I then took these out and put them in DIMM 2 and 4. Works perfectly now.
Damn MSI's memory slot color-coding! ...
Ok, just so we're all talking about the same thing, when I look at my (Platinum version) manual, on page 2-7, it's titled "Memory" at the top and has images below there showing 3 alternate configurations for memory. If you look closely at the lables on the right-hand side of the images, the slots are labeled:
DIMM1 (green, closest to processor)
DIMM3 (green)
DIMM2 (orange, closest to processor)
DIMM4 (orange)
...note that the second one is actually labeled "DIMM3", not DIMM2, as you might expect. So the manual is in fact telling you to install into DIMM1 & DIMM2 - not DIMM1 & DIMM3. In other words, in the green slot closest to processor and in the orange slot closest to processor - those are DIMM1 & DIMM2. So, unlike pretty much every other board manufacture, to run in dual-channel mode, you need to have one stick in a green slot and one stick in an orange slot. It sounds like you were putting them in the right slots... just calling them the wrong names .
Now that that's cleared up ... can you list the exact part number of your ram?
Quote from: bobak2000 on 03-March-07, 10:04:31
I don't seem to be hearing anything positive about this motherboard to be fair.
No offense intended, but:
a) "To be fair", There's LOTs of positive things being reported from MSI P6N owners... I think we tend to focus in on the negative reports (human nature), or ones that confirm what we suspect to be the case. I'll grant you that there are some people reporting problems, but that's true about pretty much every board out there. I may be guilty of the oposite effect, but as far as I can tell, there's actually a lot more positive than negative being reported about these boards, so I'm a little confused that you haven't seen anything positive (?).
b) Also human nature, people who are generally happy or not having problems tend not to post anything at all. So you're much more likely to see negative reports to begin with.
...you're actually the second person I've seen report this particular problem (Edge1, who just posted is the other one). It's pretty puzzling, for sure. If you can post the model/part number of the memory you're using, maybe we can figure something out. I think Edge made some progress earlier by bumping the mem voltage up to what the memory was rated for.. have you tried that?

P6N SLI FI boot problems

Before I start just want to let you know that I'm a little pissed off so forgive me if I leave some details out. Ok, I have two hard drives, 250gb sata with XP and a 80gb with Vista. I rarely use my Vista HDD, I mostly use it just to check on vista stuff. I tried to get on it (changed it to first in the boot sequence) and it won't get on it, it just goes straight to XP. I was like oh well, thats just a problem with Vista. So i reinstall Vista, boots great everything is peachy. But then when I try to go back to XP, well what do you know, its doing what it did to me before, wont let me get onto XP. I have tried completely unhooking the 80gb and it says there is no boot device bla bla bla. I don't know what to try now, short of doing something with the bios (updating or flashing.) I'm probably going to do that now but I was hoping someone on here could help me.
Thanks,
Nick

Quote from: BOSSKILLER on 15-August-07, 15:20:15
read Moan Guide and provide full system specification.
"I have two hard drives, 250gb sata with XP and a 80gb with Vista"
"I have tried completely unhooking the 80gb and it says there is no boot device bla bla bla"
"I also tried to force it to boot from my sata (pressed f11 and chose it) and it still didn't work."
ensure that you have active partition on that HDD.
Ok I'm running....
Core 2 Duo e6600 @3ghz
2gb DDR2 Memory
8800gts 320mb OC Edition
P6N SLI-FI
80gb Western Digital IDE HDD (Back up)
250gb Western Digital Sata HDD 16mb Cache 7200rpm SATA 300
Yes there is a partition and a OS on it. I can access files on it through Vista on my 80gb HDD, well after the annoying task of getting permission for everything. I was just booting from it before I installed Vista again so I know its nothing wrong with that. I know if I reinstall XP again it will let me boot from it but I don't feel like having to reinstall the OS everytime I want to switch HDDs.
Pressing f11 at the post screen gives me a list of my storage devices to boot from and that still doesn't let me. I know the XP is fine, it just won't let me on it.

MSI P6N SLI Platinum Sound problem

M using MSI P6N SLI Platinum (MS-7350), i am having problem with sound, i have attached 5.1 sound system all speakers are working fine accept front right, may i know what the problem is ? I've Tried everything thet was possible, Head phone, Speaker Wire, etc. etc.

What if you switched the speakers around? Does the signal from front right still missing?

K9N2 SLI Platinum memory problems

I just built my first computer with the K9N2 SLI Platinum. The computer will not boot up with my ozr memory (2x2GB) SLI-Ready Edition DDR2 PC2-6400 4 GB Dual Channel. Here is the link: www.amazon.com/gp/product/B000XFI1EE . I can get it to boot with my old kingston ram (2x512MB). Once and a while it will start up with one stick of the 2GB with the Kingston but not all 4 at once. When I do get it to start up I eventually get the blue screen of death. The screen never stays on for long to write stuff down. This is my first build and I used my old hard drive with the same windows on it. It is vista home premium 32-bit. Would changing all the hardware mess up the software on the hard drive? Let me know what you all think. Thanks!
Zach
K9N2 SLI Platinum
AMD henom II X4 940 Black Edition 3.0GHz Cache 8MB AM2+ 125W Processor
Corsair 850-Watt TX Series 80 Plus
EVGA e-GeForce GTX260 SC 896MB DDR3
OZR SLI-Ready Edition DDR2 PC2-6400 4 GB Dual Channel

Quote from: Fredrik on 05-May-09, 22:22:15
Could be the seating of the processor. Think it would be good to take the motherboard out and reseat the processor. Clean off old before applying new thermal grease.
If you want to learn what the BSOD says, normally they a r e a Windows/software problem, disable Windows' automatic restart. Right-click This computer and choose Properties. Click Advanced, and un-tic the 'Restart automatically'.
Could it be a cpu problem? I do notice when i have both of my 2x2GB rams in i get four red LED lights which my manuel does not say anything about. I have read on other forums that this could be the cpu is not seated right. Is there any software that will tell me if the cpu is not installed correctly?

P6N-SLI PLATNUM, Memory voltage non adjustable ?

MS-7350 ver 1.0 bios ver 1.6 memory voltage cannot be changed from auto to manual for voltage adjustment. is there something i need to do to unlock this ? memory timings are adjustable.

thanks for the quick responce, i will try that. all of the other settings are changed by first pressing enter first. also the memory voltage is not in bold white letters like the other settings, which led me to believe it is locked out.

MOVED: P6N SLI Plat ethernet problem (when OC)

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=108807.0

Quote from: SteveS on 02-June-07, 02:40:31
Thanks for the tips, but I did get the onboard LAN adapter working again. I ended up having to power down the PC, removing all power to the mainboard, resetting the BIOS, and then it worked as expected.
My point is that the LAN adapter gets flakey when I start overclocking. I'm posting to gripe and also to see if anyone else has experienced this.
more likely this is attributed to a bug in the bios. you can flash your motherboard to the later bios release and try again. this is a very risky process as one bad flash can render your motherboard unusable. like i said, make sure u follow the instructions carefully before u proceed.

MSI P6N SLI boot problems

I recently bought a P6N SLI and new memory since my current board is getting old
When I got everything assembled and turned it on, all fans and lights started, but there were no beeps and no video
I made sure all power connectors were not loose and tried it with minimum components out of my case, still same problem
tried old memory in case new memory was faulty, no luck
I'm sure all old components are working (using them right now)
sent board in for RMA in case I got a bad board, new one did same thing
since the board didnt come with a D-Bracket, I threw one together (4 LEDs on the red pins, ground on USB) all 4 lit up "System PowerON The D-LED will hang here if the processor is damaged or not installed properly"

I am attaching a link to MSI's CPU support page..you can also get there by going to the top of the forum page, to the right of the MSI banner are all the links you need..handy. I would think, that any P4 series or any Core 2 Series CPU would be supported from the initial bios release. The "D" series are a bit out of the mainstream, but are supported once bios is updated. If you have a decent computer repair store, they should be able to pop in a P4 or C2D CPU to get it into bios and flash it. Hey, here's a thought...the Core 2 Duo chips are relatively inexpensive now..you can get a Core 2 Duo E4500 for about $125 US that will run circles around your D805...? Good luck.
Paul
CPU support link--> http://global.msi.com.tw/index.php?func=prodcpusupport&prod_no=1141&maincat_no=1

What the most stable quality 4gb (2x2gb) memory for the P6n SLi Platinum?

Hi,
I'm looking for the most stable and very good quality 4gb of ram for the P6N sli platinum MB - what make does everyone recommend for this board?
I note that Kingston value ram is mentioned on the Approved list but I wanted something faster than the valueram?
Does anyone have either G.Skill or super talent and if so how do they work? Any other makes that you can recommend?
I know that there have been issue swith 4gb of ram for Xp/Vista 32 bit systems but from what I am reading hopefully the next bios should resolve this ...?
Thanks as this is the only item that's holding up my build now !

I don´t know whats the most stable 4GB solution is, I only can tell you, that I use Micron/Crucial mamory for years and never had any problems.
Actually in my new P6N-SLI Platinum are working 4 1GB dimms of crucial value ram ddr2-667 without problems.
There is a new bois version 1.22 for the platinum which solved the 4GB problem of earlier bios versions.
That was a bios problem and not a problem of the ram.
Manufacturer as Gskill on their GBHZ6400 modules and OCZ on their 1066 SLI modules are using the same Micron chips called D9GMH which are on my values.
They have great potential above the rated 667 speed. Cause i´m coming from germany and at the moment the prices of memory here are very cheap, a lot of people are thinking about upgrading their memory.
All what I read about here in germany G.Skill, Mushkin(very expensive), OCZ, A-data, TeamGroup are the most reliable rams
when it comes to high speeds and low latency modules.
At least I recommend the Crucial Ballistix ddr800 if you are not able to handle special settings in the motherboard bios.
And of course there are coming 2GB modules from most of the manufacturers, so you only need 2 modules for 4GB.
It´s your choice...
greetings from germany
gonzos-revenge

MSI P6N SLI PLATINIUM problem with ram 800MHz

Hello.
I have problem with ram frequency.
I have MSI P6N SLI PLATINIUM and OCZ 2x2GB 800MHz CL5 but in bios I see that my ram runs in 667 MHz. Because I have 800MHz ram, so it shouldn't be default 800MHz and not 667MHz? What I have to do to show bios that I have 800MHz ram?

Quote from: DaLoona
Oke, but they told me when i bought my new system that XP auto adjusts the speed of the memory.
XP 64 bit can works normally with 4 or more GB they said, just like vista.
Just typing what "the professional's" at the store said.

MSI P6N SLI V2 does not boot up from cd/dvd and few other problems

HI
I just bought a computer P6N SLI V2 + E6750. It has following problem. It does not boot from cd.
I have Sata HD. CD/DVD is installed to IDE as a master.
I have done settings in bios so that First boot is cd/dvd and second is sata HD. Anyhow it still goes to the hd and stars windows.
I was only able to boot up from cd when I disabled hd from boot sequency. Meaning I left only cd/dvd there.
Hopefully you pro's can help me.
Then there is another problem. Windows is telling me that it found new pci device. I do not know what device. I have only Graphig card (geforce 8800 gts) installed into pci-E. Drivers and software are also installed, I assume proberly. How to find out what windows thinks it found.
Third problem is onboard soundcard. I cannot get any sound out from the machine. I have downloaded driver from realtek, but still no sound.
Unfortunatelly I do not have original software for motherboard. Only the latest from MSI website.
Hopefully someone can help me.
thanks.

About bootup, i dont know yet.
To find out what windows found, look in devicemanager.
To go there go to controlpanel, system then choose devicemanager.
There you can see what's installed.
Last, your soundcards needs to be enabled in bios, under integrated peripherals there should be a line with "onboard sound", enable this and sound should work, unless its broken.

Memory Setting DRAM setting P6N sli platinum

i wonder what setting you would go for the highest cpu GHZ . i have set mine at these and it is 3 GHz , temp 28 degree Centigrade. my main concern is dram config at this stage. your input will be much appreciated
DRAM configuration
Options
1-tCL auto 1-6 mine is set at 6
2-tRCD auto 1-7 mine is set at 7
3-tRP auto 1-7 mine is set at 7
4-tRAS auto 1-31 mine is set at 20
5-tRRD auto 1-15 mine is set at auto
6-tRC auto 1-31 mine is set at auto
7-tWR auto 1-6 mine is set at auto
8-tWTR auto 1-15 mine is set at auto
9-tREF auto 7.6us 3.9us mine is set at auto
10-command per clock (CMD) auto 1T 2T mine is set at 2T
cpu volt 3 tick above default
memory volt 1.9
north bridge 1.5 i think not sure
south bridge default
MSI P6N SLI Platinum
Q6600 Go revision
MSI 256 graphic card ATI HD 2400
2 X 1GB crucial pc6400 CL6
mastercoll 500Watts
window xpsp2

Have you tried decreasing RAM speed?
Read the Posting Guide.

P6N SLI V2 problem with "dual core center"

I have the P6N SLI V2 with E4400 and 7600gt running XP pro sp 2.
after installing and running MSI's "dual core center" (including .Net framework) I only have the "VGA" option enabled, the "MB" option is disabled as well as the D.O.T option. I tried uninstalling and reinstalling as well as downloading the latest version, but I have the same problem. I get no MB options at all (like no cpu temp, fan speed, core speed etc.). I didn't make any changes to the BIOS yet (other than changing the boot sequence), and ideas?

Quote from: nautica on 15-July-07, 13:19:02
and ideas?
A great one.
Don't use MSI's utilities. Anyone here will tell you that.

MSI P6N SLI sound problem under windows 7

Hi all!
I have an MSI P6N SLI mainboard and I have installed win7 ultimate x64 to get a look on that OS. Everything works fine expect one thing: I have no sound. I tried to install manually the realtek sound driver but no changes. When I check the Volume Control Options then neither the Speakers nor the Realtek Digital Output checked (but the speaker is plugged in).
However I have sound under Linux.
Could someone help me? (and sorry if I have missed the topic which resolves this problem if there is any)

Hi everyone,
hope it's ok to refresh this thread - I did not want to open up a new one, because this one matches my problem perfectly - but my speakers are plugged-in the right way
I'm running Win7 64 on the MSI P6N SLI (not v2 no Platinum) and am unable to install the sounddriver (well not correct - I did install the driver). The upgrade advisor said all green (under Win XP 32) and the MSI-Driver-Page propagates Win7 32/64 is supported for the SoundCard of my Board.
The driver installs just fine, but the device won't come out of "I have a problem"-state - always telling me "The drivers for this device are not installed. (Code 28)" (I event tried installing the driver manually with pointing the win-hardware-setup-routine to the driver-directory) - still no use - I removed and rebootet serveral times...
Hope anybody has a solution for this problem (I'm taking the posts above as a "this has to work"-basis so i'm not ready to give up and go out there and buy a new soundcard )
Thanks in advance for any hint.

P6N Sli V2 Memory Problems

Similar Messages

Maybe you are looking for