P7-1030 install graphics card
For P7-1030 with Windows 7:
I am trying to upgrade graphics by installing a Visiontek 6350 Radeon PCe-16 Graphics Card into the PCE-16 slot. I have replaced the original 240 watt power supply with a Thermaltake 575 Watt Smart Power Supply.
QUESTION: How do I disable the onboard Intel HD Graphics in order to install new graphics card? I tried installing the new graphics card without disabling the existing onboard graphics and computer would not boot. VisionTek instructions state that I "may" have to disable onboard graphics to allow new card installation.
Can anyone help? Thanks.
VKLuge, welcome to the forum.
Here is a guide that should help you with your problem. Normally, there is no need to disable the integrated graphics. It is done automatically upon the BIOS recognizing that a discrete card is installed.
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.
Similar Messages
-
Installed graphics card does not support the opengl features recommended
I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick -
After updating to lion installed graphics card does not meet minimum requirements for aperture
Hello,
I updated to OSX lion yesterday. and Apterture is given me this error message. "The installed graphics card does not meet the minimum requirements for Aperture. I tried the Option Command Open app thing to try rebuild the database. But nothing happens when I try opeing the app using those combo key's So I removed the app using mackeeper and tried reinstalling it. still same issue.
I have following machine
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 8 MB
Memory: 8 GB
Boot ROM Version: MBP81.0047.B0E
SMC Version (system): 1.69f1
Serial Number (system): C02F94ETDMGG
Hardware UUID: 132AE53D-0766-5E17-9F54-ED935D6F7AB3
Sudden Motion Sensor:
State: Enabled
Chipset Model: AMD Radeon HD 6750M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: ATI (0x1002)
Device ID: 0x6741
Revision ID: 0x0000
ROM Revision: 113-C0170L-521
gMux Version: 1.9.23
EFI Driver Version: 01.00.521
Displays:
Color LCD:
Resolution: 1680 x 1050
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
VX2245wm:
Resolution: 1680 x 1050 @ 60 Hz
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: QD0064002266
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Apple Mini DisplayPort To VGA Adapter
Adapter Firmware Version: 1.03
Display Connector:
Status: No Display ConnectedHAve you tried disconnecting the external monitor rebooting and then runnig Aperture?
-
Error: The installed graphics card does not meet the minimum system requirements by Aperture
I have a Mac Pro 3.1 10.5.8 and Aperture 2.1.4. My NVida 8800gt with 512 mb was over heating so I brought and install the ATI radeon hd 5770 to replace it. Now when I try to start Aperture I get this message "Error: The installed graphics card does not meet the minimum system requirements by Aperture". All other software works fine, ie photoshop elements and Safari. When I install my old card aperture will open with no problem, but of course the card will overheat within 10 mins and I will have no video. I have search on google with no luck. Will upgrading to Aperture 3 fix this problem?
5770 requires 10.6.5.
The 8800GT - there is the 350* bake in over 10 minutes - 50% or better chance
you can find 8800GT on http://myworld.ebay.com/macvidcards/
http://www.macupdate.com/info.php/id/23049/smcfancontrol
http://www.bresink.com/osx/HardwareMonitor.html
Fan control helps with FBDIMMs which need to be kept under 70C too. -
Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my imagesTry restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting. -
Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"
Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library -
Software problem? Installed graphics card does not meet minimum requirements
Ok - I seem to have just met the same problem that others have experienced. MB Pro, less than 3 years old, graphics card NVIDIA GeForce 9400M 256MB. I have been using Aperture up until about 1/2 hour ago with no problem. Just now trying to sync my iPad, and Aperture (which launches automatically) responds with "installed graphics card does not meet minimum requirements". All software is fully up to date, running latest versions of all Apple software. What is going on please? I have restarted several times, tried Command/Option/P/R on restarting, but nothing seems to make it work.
You might try to reboot again, this time with the Shift-key hold down to boot into safe mode. This will clear some caches and reset the graphics card. Aperture will not run in safe mode. You will have to reboot a second time.
Do you use an external Monitor? Then disconnect it, before rebooting.
Regards
Léonie
P.S: Do you use a blue tooth keyboard? If you turn it on while booting, you may accidentally boot into Safe mode without noticing it, and then Aperture will give exactly the above error message. -
Installed graphics card does not meet the minimum requirements for AP...
2006 MP with an HD 2600 and a 7300 GT card installed, 8 GB RAM, OS 10.4.11. Tried to install Aperture v1 from CD and got the error message "The installed graphics card does not meet the minimum requirements for Aperture" which disallowed upgrading to v1.5.6 because v1 would not install. So I downloaded and installed the v2 trial and got the same error message.
The release lever on the 7300 card would not work so I left it in slot 1 for now rather than risk breaking the card. That put the HD 2600 card in slot 2, which is not optimum but I do not think it should cause problems.
23" ACD connected to the HD 2600 card.
Ideas? I perused the threads and found similar reports but no solutions.
TIA
-Allen WicksAnswering my own question, I moved the ACD connection to the 7300 card and v2 Aperture installed OK.
Now I guess I need to get precise details on how to eject the 7300 card (mainly better directions than Apple's as to exactly what direction to force the release lever toward). I applied way more force than I am accustomed to and the card did not release.
Comments appreciated, TIA.
-Allen Wicks -
HT4007 The installed graphics card does not meet the minimum requirements for Aperture.
The installed graphics card does not meet the minimum requirements for Aperture. I have not used Aperture in a while and just got this error message. I tried applying OS updates and reinstalling Aperture and still get the same message. Does anybody have a solution or work around.
Are you using a non-standard Graphics Cards? Then this may be the reason.
You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
Reboot and make sure that you this time will boot into regular boot mode.
See: Mac OS X: What is Safe Boot, Safe Mode?
If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
Merry Christmas!
Léonie -
Problem Installing Graphic Card Driver in Lenovo G505s AMD A8
Configuration Processor - AMD A8-5550M RAM - 8GB (4*4 configuration) OS - Windows 10 (Upgraded From Windows 8.1) Graphics - AMD Radeon HD 8650G + HD 8570M Dual Graphics I have upgraded my system on 30th July to Windows 10 Pro. Now i am unable to install Graphic Card Driver.I Even tried unninstalling the Drivers using DDU(Display Driver Unnistaller) in Safe Mode and tried Re-installing Driver but while reinstalling Driver my system always Restarts and installation interrupts in between I tried this 4 times then i tried using without driver but my laptop used to get thermal shutdown.So Finally i performed a System Restore, but i wanted to perform a clean install for which this problem must be solved as i won't be able to do system restore after clean install. One more Problem after i've upgraded to windows 10 my graphic driver is recognized differently as R5 M200 but actually its HD 8570M. Observations Whlile installing Driver :Laptop gets Heated and restarts firstly i thought its a Thermal Shut Down but it restarted and i even tried to preform the installation after placing my laptop in front of air-conditioner but it again restarted.Help me out finding the solution for this problem.Warm Regards,Rishabh
Hi,
Hope you've already tried this from HP support page:
h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_148736_1&swEnvOid=4053#tab-history
If so,
Uninstall AMD graphics from Device Manager.
Restart system.
Download, save & install this:
support.amd.com/en-us/download/mobile?os=Windows%207%20-%2032
Restart system
Check.
Regards
Visruth -
G510-59398​343 install graphic card
Hi,
I have recently bought Lenovo G510-59398343 laptop. This didn't have graphic card when i bought.
Does this model support installing graphic card??
If so, which card can i go for in Nvidia(1GB/2GB)Hi Madhu,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that as the G510 model that you have did not come with extendable graphics but it has basic integrated graphics (Intel HD Graphics 4600 ) any of the other cannot be upgraded or extended.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Help! How to install graphics card driver?
I installed a Solaris 8 system on Intel platform with S3 Savage 4 graphics
card equipped. Seems Solaris doesn't support this card, so I downloaded a
driver file named savage_drv.o from somewhere. How can I install it
under Solaris to replace default standard VGA card I installed during
installation.
Thanksi'm in the same situation. i have solaris 8 x86 and i went to http://www.probo.com/timr/savage40.html and downloaded the savage_drv.o driver as well (because it's the only hope i've found related to running a savage4 on this platform) and i'm not sure how to go about switching out this driver for the VGA driver that's currently implemented. there are no instructions about this on the site, the only real instructions are for linux/bsd and those are pretty much no-brainers anyway.
if ANYONE knows how to do this that would be great. thanks in advance! -
Notebook doesn't recognize installed graphics card
Recently purchased the HP Envy 15-q748ca notebook which comes with the Nvidia GeForce GTX 850M installed. However, laptop has stopped upgrading the drivers and no longer recognizes that that GPU is installed and is instead using the Intel HD 4600 GPU. Help.
hi @BurnsMac ,
Welcome to the HP Forums!
It is a great place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you recently purchased your notebook and it has switchable graphics and it is not utilizing both cards. You have done all the updates.
When I checked the specifications for your notebook I do not see 2 graphic cards. HP ENVY 15-q178ca Notebook PC Product Specifications
Here is a link to Resolving Video and Graphics Issues.
Here is a link to Switchable Graphics on Notebooks Configured with Intel and ATI GPUs that may help.
If you still have concerns, I suggest contacting HP support for assistance.
Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
How to install Graphic Cards on HP Z620 and power cable
Hello everbody I purchase a brand new Hp Z620 without graphic cards. I install the graphic cards already but I couldn't find the power supply. I install the SLI OEM HP Quadro 5000 but I can't seem to find the power cable. Can anybody tell me where is the power supply for the graphic cards. Thank you AQ
This question was solved.
View Solution.Hi,
You might get better assistance on the HP Enterprise Business Forum.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Display Problems After Installing Graphics Card Drivers
Hi, I was wondering if anyone can help with a problem that's got me stumped?
I've just upgraded my pc (CPU, Motherboard, Memory, Hard Drive, Sound Card, Monitor) - the only things that haven't changed are my graphics card and PSU.
I've built the system, installed windows and the motherboard drivers, which all work correctly. But after I install the graphics card drivers and reboot, the display becomes all scrambled when it loads into windows. The display is fine with the initial boot and up until the Windows XP screen, with the moving bar comes up.
The graphics card was fine in my previous system and I have tried my old monitor, but neither works. I've updated the BIOS, using the MSI Live Update program and have also tried various versions of the nVidia drivers (including the latest).
Any help would be appreciated.
Thanks in advance.
****UPDATE****
I've now managed to install the nVidia drivers and now windows loads normally, but after a short amount of time the screen scrambles again.I have the same problem. It happened right after I installed the graphics update. When the computer restarted, my screen went crazy. I couldn't see anything, just a screen full of horizontal lines. After restarting a couple of times it seemed to go away, but it has begun to happen again recently. although not as bad yet. I am not saying it's not a logic board issue, but it does seem funny that more than one person is experiencing the same type of problem after the graphics update. I guess it's time to take a trip to the apple store.
Maybe you are looking for
-
Hello: I have a Toshiba Satellite p755-s5215 running Windows 7 Home Premium. Recently, while attempting to remove malware on the laptop, my antivirus program restarted the computer and it went straight to a black screen with the following message: I
-
I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectur
-
Hi All, We are planning to upgrade from 4.7 to ECC 6. My requirement is to before going for upgrade to ECC 6.i need to check all CUSTOM programs for UNICODE compatiablity in 4.7. If any errors found i need to correct it in 4.7 itself and then go for
-
Hi hussein, I am checking an Oracle Report in 11i "CASH FLOW" setup. And I saw the ff. tables that are being accessed: gl_cash_flow_trans gl_cash_flow_codes gl_period_statuses Why can not I find these tables in our 11i database? Thanks a lot
-
It happens whenever I'm on the internet - banking etc. Usually the options - like how I want my name written - come up when I click in a box, and I can select the one I want. Now however when I click on the box the options flicker past quickly & no m