P7-1287C will a Pny gtx 750ti work without a new power supply

Will i need a new power supply to operate a PNY gtx 750 TI. ? Will only go to HP screen and beep and cannot get to startup screen.
Pegatron (Camel2)
Intel H61
i5-2400
8 gbs memory
currently integrated video. 
:  Does this needed change in Bios?
: PCIe card said 400 watt minimium. I believe i have 300 watts.
: Change to 550 watt P/S?

I saw something about the bios needs to be "changed". Has to do w the motherboard.. I was going to buy one Friday. Let me know if u figure it out.

Similar Messages

  • Will DM v4.2.2 work with a new BB Storm?

    I have been trying -- and failing -- for two weeks now to "fix" Desktop Manager v4.7 so that it will sync with my new Storm.  One error after another.  I've tried every single "solution" I could find on BlackBerry.com and CrackBerry.com and absolutely nothing works.  DM v4.7 simply will not permit me to CONFIGURE synchronization, let alone actually synchronize a thing.  With no contacts or calendar on the Storm, it's worth less than a bad cell phone.
    I'm running on XP Pro SP3, Office 2003.  Several folks have reported that downgrading to DM v4.2.2 has solved a lot problems they've had with v4.7.  My question is simple: will DM v4.2.2 work with a new Storm or am I just destined for another failure experience if I go to the time and trouble of clean un-installing v4.7 (yet again!?!?!) and downloading/installing v4.2.2?  If v4.2.2 won't work, is there ANY other version of DM that will work with a Storm or is v4.7 the only show in town?  (If it is, the show just closed.  iPhone, here I come.)  Would appreciate any advice and counsel you can give me.  Thank you!

    You're welcome. Apple does sell camera connection devices for lightning connectors so you can look into that if you want to.

  • I have a new mac book pro. Will my old jam packs work with the new garageband?

    I have a new mac book pro. Will my old jam packs work with the new garageband?

    I have same problem, been using a macbook 13" for nearly 9 years but it was failing so I bought a macbook pro 15" and after having problems and error messages when trying to download loops ( I finally went to the App Store and opened garageband from there which install some loops), it finally downloaded some but not all the loops that my jam packs had, also I have tons of non-apple loops that I purchased over the years but I want to know if they will work on my new mac ?
    macbook pro 15"- 2.3ghz - 8gb- 2TB

  • Will version iPhone 5 unlock work on the new tmobile 4g let network

    Will version iPhone 5 unlock work on the new tmobile 4g lte network

    Only the AT&T unlocked phone will work with T-Mobile LTE and other features.

  • Will a ipod nano charger work with a new ipod touch?

    will a ipod nano charger work with a new ipod touch?

    If you want to charge a touch gen 4 or less, then absolutly (It just might take a little longer than one specifically for the touch, because of watt dierences I think). I'm not sure about gen 5

  • Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Will my Cinema HD Display work with a new Mac Pro Quad Core?

    Yes.
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    https://support.apple.com/kb/HT5219
    https://www.apple.com/thunderbolt/
    http://support.apple.com/kb/HT5299

  • Will the Sony Bravia KLV32 402A (19.5 V DC) purchased in India works in USA where power supply 110V

    Will the Sony Bravia KLV32 402A (19.5 V DC) purchased in India works in USA where power supply 110V. I know that the TV support Both NTSC (USA adopted standard) and PAL (India Adopted Statndard). I want to know about the Power supply, DO I need any external adapter to convert or I can just plug in TV with a normal adapter to change the Socket pin.?

  • Elite m9200t. Just quit working. Does not go into bios. new power supply - nothing but fans.

    HP Elite M9200t
    Windows 7 32-bit
    Error Messages:  None
    No changes made to system.
    I hit the turn-on button one morning and nothing happened.  Looked in the case and was running except the case fan.  No lights were on.  I tested the power supply and it tested good.  Tried again - nothing.  Connected a new power supply and tried again; Lights worked and cpu fan worked, but no attempt at boot.
    I have disconnected everything - same result.
    Does this sound like a bad ASUS mortherboard?

    Heather, the PSU for the first gen G5 iMacs and the ALS models are the same physical size, but the ALS PSU is an auto-switching 110-220v model. Nice to have, but not the cause of the problem if it is working correctly.
    Is your first gen one of those effected by the Repair Extension Program? If so, you actually have 2 years on problems related to the PSU and video.
    Give Apple a call back and see if they have any suggestions, but don't let them put you off as you are still within the warrantee.

  • Does PNY GTX 750ti on HP p7-1227c need BIOS update?Chris

    I have an HP p7-1227c  BIOS 7.04 and a PNY GeForce GTX 750ti OC 2048MB video card
    This is Not the MSI card with the legacy BIOD downgrade switch.
    Apparently a version 8 BIOS will enable UEFI which is needed.  Is there a way to do this without having to update to Windows 8?
    Chris

    Chris, welcome to the forum.
    I believe that the card requires UEFI in the motherboard.  HP didn't begin using UEFI until mid-October, 2012.  I suggest contacting PNY's Tech Support to see if they have a VBIOS update that will allow the card to work with your BIOS.  There may even be a work-around for the problem, but they would be the ones to know.  I don't believe that Win 8 would help with the problem.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Will my 30" apple display work on a new mac mini

    I want to upgrade to an new mac mini and from my Powermac G5.. but I ave a 30" apple cinima.
    Will it work on the new mac mini?
    Thanks
    Martin

    Hi Martin, the Mini only has Thuberbolt for Displays...
    http://en.wikipedia.org/wiki/Thunderbolt_(interface)
    Though that article says...
    This makes the system backward compatible with existing DisplayPort hardware upstream of the driver. A single Thunderbolt port supports hubs as well as a daisy chain of up to seven Thunderbolt devices; up to two of these devices may be high-resolution displays using DisplayPort.[6] Existing Mini DisplayPort adapters for DVI, dual-link DVI, HDMI, and VGA are compatible with Thunderbolt, allowing backwards compatibility and no loss of functionality compared to Mini Displayport.
    I cant find any!
    http://store.apple.com/us/configure/MC816LL/A?

  • K8N NEO4 new old power supply died new power supply installed will not boot

    This is an old build. The K8N NEO4 powers up and is followed by a long beep. The lights on the back of the USB card (4 lights( indicate 3 greens and one red in the upper right corner. According to the instruction manual, this means that Initializing Floppy Drive Controller
    This will initialize Floppy Drive and controller. This makes no sense.
    I flashed the CMOS both using the red button and removing the motherboard battery to confirm the power supply was bad. In hindsight, I wish I had not.
    I switched from a 500W power suppply that died to a 430W thermaltake power supply. I've disconnected a hard drive and a burner to see if power was an issue, it was not the cause.
    I'm pulling my hair out here, please help!

    "Is it possible the power supply took the CPU with it when it died?"
     Yes it's possible that it did that. It's also possible that other components were killed also, that's why changing and trying different parts are required until you find everything that may have been damaged. We can only suggest what might be bad and you or someone else will need to do the actual work, there is no getting around that. We can give the serious advice, you need to do the serious labor.
    "...don't want to take the Tuniq tower 120 off if another processor will not work"
     Anybody that repairs PC's would need to swap parts to be 100% sure of what's wrong.
    Pin #20 is where -5V would be if newer PSU's still had -5V. The only the reason you would need the -5V is if you had an older K8N MB that had Creative sound on it instead of Realtek.

  • Random sleep while working without reason despite power settings always ON hibernatio​n disabled.

    For the last couple of weeks the computer started to go into sleep or hibernation mode, at random times, without warning message and no reason as the power settings have hibernation disabled and all other power options, including sleeping are set to "never", or always ON. Also it happens either 5 min after booting or an hour after, even when using applications and having open windows. The only way to get back to using the computer is to do a forced shut down from the power button and then reboot.
    Computer has been working fine for years. I have Windows update running daily, updated antivirus and no registry issues. This is getting very annoying, please help with solutions or suggestions. Many thanks for your time.

    In Case it may help, here are some specifications:
    HP Media Center PC m7250n
    PentiumD 820 (S) DC 2.8 GHz:
    800 MHz front side bus
    Socket 775
    Chipset: Intel 945P
    Motherboard: Asus P5LP-LE
    HP/Compaq motherboard name: Lithium-UL8E
    Hard drive: 250 GB SATA 7200 rpm
    Memory installed: 3GB DDR2 SDRAM
    Video graphics: ATI Radeon x300se
    128 MB DDR memory. I/O Ports: Composite, S-Video, VGA
    Operating System
    Microsoft Windows XP Media Center 2005 with Update Rollup 2
    Microsoft Service Pack 3
    Power Supply: HP-D6057F3R 300 W.

  • Is airport  extreme working with 220 v  power supply?

    my cousin  gave me an airport extreme as present , bought in USA.Can I connect it with 220v power supply (greece) or what I must do to connect it to 220v power supply?

    It will accept AC input voltages between 100 and 240 AC,  50 to 60 HZ.  All you will need is an adapter plug to interface between the US plug and the Euro/Greece wall socket. These adapter plugs are low cost.

  • Cq60 new power supply same battery no power will not turn on

    Presario CQ60  
     Just plugged in power supply and no power no start.  I purchased a new charger and all of the light stopped working, no fan and now battery gets warm.  Any help ?
    This question was solved.
    View Solution.

    No I have not been able to get any power, even all the led lights are out except for the power led by the plug on thebackside of the laptop.

  • Will my printer and scanner work with the new intel mac?

    My first post.. so I hope i am in the right place! (was in wrong place last attempt!)
    I want to buy the new intel...but I would like to know for sure if it will work with my scanner and printer.
    Printer is Epson Stylus Photo 2100 and the scanner is Microtek ScanMaker 4900.
    I have emailed both Epson and Microtek... phoned Epson.. and I still do not know the answer.
    The responses were
    "At this point in time with have been given no information on whether our printer drivers will work or not....".
    "Yes it will work with OSX 10.4"
    "As you know this new intel chip has just hit the market. This particular configuration is in the alpha stage of testing. As of now there has not been any reports or customer correspondence of any concerns."
    I have been scanning these posts and it seems that only the operating system is relevant? If anyone could help I would appreciate it. I am finally able to replace my old, old, well loved G4 but am worried I will make the wrong decision.

    Thanks all for the helpful comments. I am getting closer to going out and buying the intel. As for the Canon printer... its not really an option for me, since the Epson cost me more than the computer will! But I will keep it in mind for the future. And do you think this applies to digital cameras as well Tomzo? I have been considering buying my first digital.. and thought the pentax might be best, since it apparently can use the lenses from my film camera.
    Thanks again all..I will keep checking the apple site list and the web sites as suggested by you.
    Power Mac G4 (AGP graphics)   Mac OS X (10.4.4)  

Maybe you are looking for