P750-BT4N22 Blue Screen out of the blue
I purchased this laptop new from the toshiba direct website Nov 2011 and have barely used it. There is maybe 15 hours on it and I have not ever installed any hardware and no software since Mar 2012.
The other day I was watching a netflix movie and the computer shut off. I thought it had over heated so I waited a few minutes and turned it back on and it went to blue screen and shut off again. I waited until the next day to try again and this time the blue screen appeared and the pc shut down seconds after booting up. Every time this has happened it has been too fast for me to read anything on the screen.
I have a feeling it is faulty hardware from the factory. Does anyone have a reson for this, a possible solution, or know if Toshiba will fix this issue for free (known issue, etc.)? Thanks, Joe.
Satellite P750-BT4N22
..the blue screen appeared and the pc shut down seconds after booting up. Every time this has happened it has been too fast for me to read anything on the screen.
Be sure to disconnect any attached devices, Joe.
This procedure will enable you to read the blue screen.
Turn the computer on and immediately press and hold the F8 key. On the Advanced Boot Options menu, choose Disable automatic restart on system failure.
Report the ***STOP error and any file name mentioned on the blue screen.
-Jerry
Similar Messages
-
My app folders keep dissapearing or the app go back and fill the screen out of the folders
My folders keep dissapearing, not all but a lot. sometimes the apps fill up the sreen after the folder leaves other times I cannot find them.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Working now? If not, ask yourself what may have changed just preceding the misbehavior? Add and App? Update one? Update iOS? Anything.
Use iTunes to restore your iOS device to factory settings - Apple Support
ÇÇÇ -
Out of the blue, my AppleTV went to a screen that had two icons, Computers and Settings. Why won't it go the the usual TV screen with viewing options? Help!
Here's what finally worked for me with Apple TV 3rd generation. Out of the box, when setup with wi-fi, it breezed through without any issue. As soon as I powered down and connected it to another tv (same wi-fi network), it got stuck at setting date/time. The remote would help in getting out of it, but the home would only have "Computers" and "Settings" and pretty much useless except for AirPlay. Here's what I did to resolve this:
1. On your main router, temporarily disable the firewall or set it to the lowest setting allowable (a reboot of the router maybe required).
2. Restart apple tv via the "restart" option in the "General" option in the main settings menu.
3. It should breeze through and not show the "Setting date/time" screen.
4. Once it loads up properly, turn on your fire wall as before (a reboot of the router maybe required).
I think it worked for me out of the box, but auto-update to the latest software introduced this bug. So, everytime apple tv tries to synch with the time server, this issue will come back. To disable this, I turned off the "auto time synch" option in Settings -> General.
I am fairly confident that I'd be able to use steps 1 through 4 anytime this recurs. Possible scenarios causing recurrence of this issue:
1. Unplugging the power to apple tv or power failures.
2. OS updates.
3. Restoring apple tv using "Restore" or via micro-usb and iTunes to the lastest OS.
Hope this helps. Please post if this works for you. -
Ok one day out of the blue my ipod just stopped working it wouldnt turn on nothing but after recovering it, it's fine now but there is only one problem my screen wont work i can't do anything on it not even unlock it please someone help!!!!
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
Thanks for any help!
GinaWhat your describing could be a logic board or memory issue.
You did or did not hear 3 startup chimes? If you hear 3 chimes when you start it, that would indicate a memory problem. Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac. -
Hello there,
After the 6.1.3 download, my iphone 4s has no itunes and a new hard-of-hearing blue screen SIRI after the 6.1.3 download. Where did the itunes app go? How do i get it back? And how can i switch back to the old gray SIRI?
Thanks,
lost and confusedHello there, tonjay82.
There are some great sources of information in the following article that might help you in resolving the issue at hand:
iOS: Understanding Restrictions
http://support.apple.com/kb/ht4213
Particularly of note is the following:
You can enable and adjust Restrictions, or Parental Controls, on your device to prevent access to specific features or content on the device. Locate these settings by tapping Settings > General > Restrictions.
and
Additional Information
If your iOS device is missing a particular application or if a certain feature is not available, ensure that Restrictions are not enabled. Symptoms can include:
App missing from the Home screen (Safari, Camera, or YouTube for example)
Feature or service unavailable (Siri, Location Services, and so on)
Setting missing or grayed out (such as Mail, Contacts, and Calendar; iCloud; Twitter; FaceTime)
Important: Restrictions can also be enabled or enforced using a profile (typically installed when using the device for business or education purposes). You can check for installed profiles in Settings > General > Profiles.
Thank you for reaching out to us at Apple Communities on this issue.
Cheers,
Pedro D. -
Out of the blue flickering and iCal won't quit
We bought our iMac 20" last January 2008 and it has worked perfectly. I have installed all updates. After the last update (and I really don't know if it is just coincidence...) iCal won't quit unless it is forced. All data is gone. It might also have something to do with the last time I synced my iPod...?
More troubling, the screen has started flickering... almost shutting down at points. However, it is not on a regular basis and seemingly out of the blue...?
Any help or advice would be greatly appreciated.Wilrez,
Welcome to Apple Discussions.
Regarding the iCal issue, if you used Software Update for installing OS X 10.5.7, you may want to try reinstalling the update using the Mac OS X 10.5.7 Combo Update.
Let us know what happens with both problems after the reinstallation.
;~) -
iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?
Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now? -
Mail icon bounces out of the blue
Hi there.
I've noiticed the Mail icon bounces out of the blue in the dock.
I'm working with other programs or browsign the internet and Mail is calling for attention.
I open the progam, it opens properly, I close it after, and it starts to bounce again, driving me crazy.
Any ideas how to make it stop?
Thanks!Reported fixes:
"I ended up repairing Permissions and resetting PRAM and that stopped the problem somehow"
"I would remove the icon from the Dock and drag the application back to the Dock to create a new one. That normally corrects it."
Other options:
Do a Safe boot then restart normally.
* shutdown
* start the Mac and *wait* for the startup chime to sound
* after the sound, press and hold down the shift key
* keep holding and *wait* until the grey Apple logo appears
* now release the shift key and just wait (it could take a few minutes)
* eventually the login screen appears with the words SAFE BOOT -
I have dead blue screen after downloading the ios 7.1.1
I have dead blue screen after downloading the ios 7.1.1.
What should I do to fix it?Hello hagarar,
If your iPhone started displaying a blue screen after running a software update, I suggest the steps in the following article.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out,
-Joe -
Voice speech activates out of the blue
I've run with my nano recently and it behaves strangely. Out of the blue (when the screen is off) voice speech activates and "talks" about songs which are played. It goes on and on. Additionally, sometimes song is skipped, forwarded or put on hold like the side bar is pressed (but I'm sure I don't touch anything).
Hi tomstoj,
Thanks for visiting Apple Support Communities.
See this article for information on enabling and disabling voice over:
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/ht4317
If this feature is turning on unexpectedly, you may want to try the steps in our iPod assistants:
http://www.apple.com/support/ipod/five_rs/
Best,
Jeremy -
New BT Vision Box delivered out of the blue
I have had a brand new black BT Vision Box delivered this morning out of the blue(I currently have on of the old silver boxes). The letter indicated that they were issueing everyone with a new box due to features being rolled out and that the silver box will stop working in 28 days. I have an almost full hard drive of programs and films and there is no way of transfering the data accross. They advise us to watch everything before sending the box back in a prepaid envelope.
As I don't want anything new to be recorded on the old box can I set up my new black box and still watch the recordings on the old box?
Solved!
Go to Solution.rewsan wrote:
As I don't want anything new to be recorded on the old box can I set up my new black box and still watch the recordings on the old box?
Yes you can, but what you would need to do is -
leave the silver box plugged in to the mains and connected to the hub via the ethernet cable
then remove the ethernet cable from the silver box and connect this cable to the black box
switch the black box on and allow it to boot up
The silver box will then run and allow you to watch your recorded content
(putting the silver box in to standby is fine, but don't unplug the mains supply)
-+-No longer a forum member-+- -
I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?
You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
http://rfwilmut.net/missing3 -
I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?
Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
Cheers, Tom -
I've been using the mail app that came with my Mac for over a year. Out of the blue, it will not open and keeps giving me an error like "Mail cannot open because of an error and something about it not being compatible. Please help! I miss my mail
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Maybe you are looking for
-
Continuous Beeping noise on Startup and at other times
My iMac is over a year old. I have no idea what is wrong or happening here but below is what happens. I hear a continuous beeping noise from my iMac at times. I had Firefox open and when it started beeping, a little search bar opened up at the bottom
-
I am currently shopping for a new iMac system for my Graphic Design needs and would like to get feed back form the community on a few topics. I am thinking about getting the 21.5 iMac with 8GB's of ram. Would this be enough to handle Photoshop, Illus
-
Worse signal with 3Gs??? What's going on??
Have my new 3Gs at work for first time. When I was on the phone in my office The other person could not hear me!! I looked at the signal strength and it was on edge at 1-2 bars and when I walked around would sometimes jump to 3G or get worse. I dont
-
I am trying to use FaceTime, a lady, and it does not work. It worked, last nite.
-
At first, I thought it was just me. After a little reading, I see it's not. I love my iPad but this charging situation has to be fixed. After 6 hours of charging ( using supplied 10w charger plugged in to wall ), my iPad battery only regained 50% of