P780 signal issue after upgrading build number

Recently i had upgraded build number P780_ROW_8G_S227_141121 after upgradation both sim card showing no sim signal on handset
how to solve this problem please suggest .even factory restore password not accepting .
Regards
Wasi

I think you confuse standalone dbconsole with centralized gridcontrol. There's only ONE command to start database control: emctl start dbconsole. This command will start the integrated agent,too. No need to start the agent separately.
Werner

Similar Messages

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

Signal issues after upgrading to ios 6.1.2

ever since i've upgraded to ios 6.1.2 have had problems with my signals, hv never seen all bars; 2 at most. hv drop calls all the time. it;s irritating . tried evry thing like network resets, turning off/on 3g and lots of stuff suggested in other threads bt in vain . happened once before in one of the ios 5.something series bt ws fixed on the next ios upgrade. apple needs 2 fix this soon and launch the next update .once fixed i dnt think i'l eaisly try experimenting with ios updates.

Exactly the same as me. Updated now can not get FaceTime to work. Just hangs on the connecting page then loses connection after several seconds.
Friends calling me does the same thing.
It is not our router, I can download and upload data quickly without any problem.
Who quality controls IPads? Seems lots of mike and connection problems with Talktime at the moment. Apple must be embarrassed.

Iphone 4 - signal issues after upgrading to latest ios 6

I upgraded to ios 6, as suggested by itunes on my iPhone 4 and that's last day i was able to make a peaceful call.
My signal just goes for a toss once i make a call. I see the 3g Symbol vanishing and the other person is not able to hear me but i am able to hear them.
Once i disconnect the call, the signal changes to E and then goes to 3G. Tried the below solutions as suggested in forums, but no luck
Please help..I am missing my iphone terribly.
1) Shift + Restore using itunes - Didnt work
2) Reset to Factory setting - Didn't work
PLEASE HELP !!!!

I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
That I did try it tonight (succesffully restored), BUT my problem still exists.
You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
Would they still if phone had water damage (this I'm just curious - the phone didn't)?

IPhone 4S signal loss after upgrade to iOS6

Does anyone has experimented a remarkable issue on the signal strength after upgrading the iPhone 4s to iOS 6? I'm having a lot of problems with the reception of my phone; most of the time I only can see 3 bars, and as soon as I grip my phone (with my left hand) the signal goes away totally and the "No Service" label appears; a side effect of this is battery life is much less as the phone is alway searching for signal (in the backgroun as I don't see the searching label).
Do we really have the "Deathgrip" issue again?
Please let me know if you've seen a similar behavor on your phone and if you fixed it, thanks.

Hi folks,
I've experienced the same symptom - cell bars dropping away then 'Searching' message - after I installed IOS 6 on my iphone 4. The only twist is that I only experienced the symptom when I had a location service-based app open like Apple Maps, Google Maps, Waze, or Scout. I found a fix though! After I reset my Network Settings the problem is gone. Go to General --> Reset --> Reset Network Settings and activate it. The only caveat is that you'll have to reconnect to your wifi-based network (if you have one) and type in your wifi password again. Hope this helps.
dcz

Loss of AP signal strength after upgrading to Clean Air on 5508's.

After upgrading three 5508's (which support 150 AP's) from WLC/WCS version 6.0.182.0 to version 7.0.98.0, our users complained about low signal strength. Our pre-upgrade RSSI benchmarks confirmed a decrease of -10dB to -20dB signal strength across all AP's, effectively causing wireless networking to be unusable in key areas.
After confirming our Global signal strength settings in WCS and WLC's were still at the same settings they were at prior to upgrading, we contacted our VAR for advice.
He suggested that perhaps the upgrade caused all AP's to run at a lower signal strength. He was right.
At his recommendation, we reconfigured the WCS to set two AP's to use Individual mode instead of Global mode. This is found in Radios/802.11b/g/n/Tx Power Level Assignment. Setting them to level 2 resulted in an average -15dB increase of RSSI, solving our problems in the test environment. In one case we saw an increase of -30 dB for one AP.
The signal strength loss due to the upgrade was not expected, based on the upgrade documentation. Now we must change the settings manually on the remaining 148 AP's.
I'd like to hear from anyone else who has experienced a decrease in signal strength after upgrading to Clean Air 7. If you have information from Cisco that documents this problem, I'd REALLY like to read it.
Hoping this may help you,
RS

Hi Rick,
this is not "expected" or "on purpose". It just happens that improving the RRM algorithm makes things better for 90% of the people but maybe worse for 10% of the people.
This is why you can set the Tx power treshold on the RRM or set the overal RRM algorithm sensitivity.
If you put the Tx power treshold to a louder number (=closer to 0) then the APs will reduce less their power level.
Hope this helps.
Nicolas
===
Don't forget to rate answers that you find useful

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Issue after upgrade the ASA5520 from 7.2.4 to 8.2.5,

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between in one of the outside interface
i am having issue after upgrade the ASA5520 from 7.2.4 to 8.2.5, the LMI remote session getting disconnect in between the session at one of the interface but working fine with another interface,
i have outside and backup interface which work on internet failover when internet routed through backup interface the issue getting started but working fine if traffic is going via outsid

Issues after Upgrade from Oracle 10.1.0.5 to 10.2.0.5 in Windows Server2003

Good Morning Good People,
I have run in to some issues after upgrading my 10.1.0.5 database to 10.2.0.5. Initially after the firtst upgrade from 10.1.0.5 to 10.2.0.0 one has to run Critical Patch set 4 to get to 10.2.0.5. Well after initial up grade everything worked fine. I could connect to the database from within the server as well as remotely through SQL*PLUS client. However, after completeing the patch I'm still able to connect to the database from within the server, but remotely i get the following error:
ORA-12514 : TNS Listener does not currently know of service requested in connect descriptor.
I also get Error ORA-12505: TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: (description=(address=(host=mcquery2)(protocol=tcp)(port=1521))(connect_data=(sid=mcquery)(server=dedicated)))
I've tried serval different things to trouble shoot the issue but nothing seems to work.
If anyone has run into s similar issue please help. This is ruining my weekend! LOL!
Edited by: user10835577 on Aug 29, 2010 9:15 AM

From the client or the server?
SERVER:
tnsnames.ora:
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
FROM REMOTE SQLPLUS Client:
tnsnames.ora
MCQUERY=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=10.36.27.184)
(PORT=1521)
(CONNECT_DATA=
(SERVICE_NAME=MCQUERY)
listener.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Client_3)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = cotsdot370.cotsdot.dom)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.36.27.184)(PORT = 1521))
Thanks,
Malcolm
Edited by: user10835577 on Aug 29, 2010 12:01 PM

IPhone 4s issues after upgrading to IOS 8

Have few issues after upgrading to iOS 8
- Phone hangs every few hours, reboots automatically
- Bluetooth does not work properly (call does not get disconnected or even if disconnected on phone, the car bluetooth shows call is on)
- Searching for contacts is a problem
- Apps hang (especially facebook)
Any way to go back to iOS 7 ?
Any other tips / tricks appreciated..
Venkat

No way to come back to iOS 7 ...
But did you tried to reset all settings (general -> reset -> all settings) ?
For me iOS 8 was a mess on a 5S, especially car Bluetooth, and all works now fine after resetting the settings (all settings, not only network settings).

Autoconfig issue after upgrading 12.1.1 to 12.1.3

Hi all,
I am getting below mention autoconfig issue after upgrading 12.1.1 to 12.1.3.
jtfictx.sh started at Mon Mar 28 08:28:50 EDT 2011
SQL*Plus: Release 10.1.0.5.0 - Production on Mon Mar 28 08:28:50 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29858: error occurred in the execution of ODCIINDEXALTER routine
ORA-20000: Oracle Text error:
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 665
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 96
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Product
ion
With the Partitioning, OLAP, Data Mining and Real Application Testing options
jtfictx.sh exiting with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
.end err out.
i got below mention some solution from metalink, but that does not working.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=743720.1
according to note we need to create index but its giveing below metion error.
SQL> @jtfiaibu.sql jtf jtf apps
Connected.
DECLARE
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10758: index owner does not have the privilege to use file or URL datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
ORA-06512: at "SYS.DBMS_SQL", line 1199
ORA-06512: at line 37
Thanks in advance,
Sandeep.

Hi,
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operationPlease make sure you have no invalid objects. And also please see of these helps. I know these are for older version, but please check
Script jtfictx.sh Failed While Attempting To Run The Autoconfig On APPS Tier [ID 1271186.1]
Autoconfig Returns ORA-29868 from jtfictx.sh [ID 386740.1]
By the way did u iinstall companion/examples CD after installing OracleSoftware
Thanks,
Taher

Audio issues after upgrading to OS X 10.10 (Yosemite)

Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!

Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all.

Performance issues after upgrading to 11g

hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
     5 DELETE APPLSYS.FND_ENV_CONTEXT
          4 COUNT STOPKEY
               3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
                    1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
                    2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
Ofer

Please see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein

Another issue after upgrade to 9.0.2a beta

another issue after upgrade from 8.1.7 to 9.0.2a beta.
When I use "update-request", I need to specify a stylesheet. In that stylesheet, the following lines work before upgrade:
<row>
<fieldname1><![CDATA[<html><head></head><body>]]><xsl:value-of select="request/parameters/fieldname1/."/><![CDATA[</body></html>]]>
</fieldname1>
</row>
After upgrade, it doesn't work properly. What I see in the database field value is storing only
<html><head></head><body></body></html>
instead of storing
<html><head></head><body>fieldname1_value</body></html>
How can I get my result back?
Thanks in advance.

Thanks Steve,
I've upgraded to 9.0.2.0B but find the following error:
Oracle XSQL Servlet Page Processor 9.0.2.0.0B (Beta)
XSQL-017: Unexpected Error Occurred
java.lang.NoClassDefFoundError: oracle/jdbc2/Clob
at oracle.xml.xsql.actions.XSQLUpdateRequestHandler.handleAction(XSQLUpdateRequestHandler.java:103)
at oracle.xml.xsql.XSQLDocHandler.getDocument(XSQLDocHandler.java:134)
at oracle.xml.xsql.XSQLPageProcessor.process(XSQLPageProcessor.java:139)
at oracle.xml.xsql.XSQLServlet.doGet(XSQLServlet.java:61)
at oracle.xml.xsql.XSQLServlet.doPost(XSQLServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:115)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:83)
at com.caucho.server.http.Invocation.service(Invocation.java:237)
at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:323)
at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:263)
at com.caucho.server.TcpConnection.run(TcpConnection.java:136)
at java.lang.Thread.run(Thread.java:484)
Does it relates to the changes of usage of the "update-request" syntax?
Thanks in advance
Felix

Stability issues after upgrade from 5 to 6.1?

Dear all,
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.
Many thanks in advance
Andreas

"Andreas Raab" <[email protected]> wrote in message news:[email protected]..
my client plans to upgrade from WLS 5 to 6.1 soon. The application is
an intranet portal with Epicentric and Vignette used as additional
products.
However, some voices say that 6.1 has stability issues. Well, these
statements are rumours and lack any proof or even anecdotal evidence I
have heard of, and therefore it is very difficult to respond
appropriately.
Having said this, my questions are:
- Did any of you have stability issues after upgrading from 5 to 6.1
on Solaris?
- If yes, what were they and how did you solve them (e.g. upgrade to
SP 5)?
- In 1-2 sentences, what is the context of the application?
My goal is to present a evidence that the romoured stability issues
don't exist or/and a list of meastures to avoid/solve them, if any.Hi Andreas,
Normally proving that rumors are true is a responcibility of
rumors suppliers. Reverse does sound to me like a joke.
Regards,
Slava Imeshev
P.S. Current weblogic 6.1 is a stable product.

P780 signal issue after upgrading build number

Similar Messages

Maybe you are looking for