P7800 Sound System |A speaker stopped working

My P7800 sound system with my Audigy 2 ZS is GREAT!!! I love it, but I have only had the system for day. I woke up today and tested it by going to speaker settings and clicking on the Noise button and it plays a tone through one speaker at a time. My right center speaker does not play a tone like it did yesturday. Could the speaker have already gone bad? I could not have blown it because I didnt even let the sound get to high...
Is this a known problem? I can put my ear right next to the speaker and hear it as if its waiting for the next sound, the other speakers to the same, just like any other speakers... so as far as i know the speaker not putting on sound is fine... maybe a sofware failure?

Lets just say i didnt plug somthing all the way in when i switched from headset to speakers today
It works fine now...

Similar Messages

  • External Speaker stopped working - get sound through headset

    I have a Zire 72.  The external speaker stopped working.  If I listen to music or voice memos through a headset, I can hear the message so the programs are working.  I have tried a soft reset but no results.  Has anyone had this expierience?  Sounds and alerts all set to high in preferences.
    Thanks.
    Post relates to: Zire 72

    The speaker cutoff switch may be stuck in the headset jack. 
    Try this procedure.
    Turn the Z72 off. Get a non-conductive electrical contact cleaner (Home Depot has this in the electrical dept.)
    Spray a few drops on the headset plug.
    Insert and remove the plug in the headphone jack 5-10 times.
    Wait several minutes for the cleaner to dry.
    Power on the Z72 and see if the speaker works. If not, try the procedure again.
    Post relates to: Palm i705

  • Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

    I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
    It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
    Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

  • I updated to os6 and my speaker stopped working. Even the volume control is no longer available. Thoughts?

    I Updated to os6.01 and my speaker stopped working. Even the volume control has disappeared. Any thoughts?

    Hello, PhoebeBailey. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend taking a look at.  Try all of the steps in this article and if you are still experiencing the issue, see step 9.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • Left external speaker stopped working

    Left external speaker stopped working, right works fine. When I connect headphones, they work fine. Have tried two different sets of speakers, deleted plists and reset pram. Please help!

    Hmm. I think its not a sound card and its not a speaker problem because both parts (left speaker and sound card) seems to be ok as you have posted in your message.
    Im not quite sure what could be wrong but possibly this issue has something to do with the headphone jack there is a tiny switch inside the headphone jack which enables and disables the speakers if the headphone jack has been plugged.
    Maybe this switch does not work properly.
    What to say in such case the hardware needs to be replaced but in most cases the headphone jack is a part of the motherboard and in such case the whole mobo needs to be replaced and I think this is not worth because of the high parts costs

  • IPhone speaker stopped working today.  Not 1 year old yet.

    IS this iPhone worth the headache of trying to get the speaker working?
    OR should I just buy a new samsung?
    IM not impressed with iPhone this one isn't a year old and speaker stopped working.  It is a disposable hyped up junk!!!

    Hard to find your question amongst the tantrum.
    What have you tried to fix it?
    Is the volume up?
    Is the mute switch on?
    Have you restarted it?
    Reset it?
    Restored it?
    Anything other than complain?
    Samsung?
    No sound at all - Help Please! - Android Forums
    Samsung phone sound Problems & Solutions - FixYa
    Samsung Captivate: Sound not working over loud spe... - AT&T ...
    Samsung Galaxy S3 Sound/Voice Problems and Advices S 3 ...
    http://www.youtube.com/watch?v=SVubISFrNGw 
    No sound during calls (samsung galaxy s3 problem) - xda-developers
    Plans AUDIO issues with samsung galaxy proclaim
    Samsung Galaxy S2 — Speaker and mic problem when calling someone ...
    Media sound not working on samsung galaxy s2? - How can i turn ...
    The sound to my samsung galaxy blaze is not working, the incoming ...
    No sound from speaker or headset - Windows Phone Central Forums
    Simple Ways to Fix Samsung Galaxy S2 Sound Issue - Articles ...
    galaxy s3 sound problem - Samsung - Android phones

  • SL410 - One speaker stopped working - lcd hinge problem ?

    SL410 here - I noticed the right speaker stopped working. It works intermittently if I press down on the left side of the lcd screen or the hinge. I believe the wires are being routed from that hinge (?). Audio out of the headphone jack works just fine.
    Any ideas what might be going on ? Is this a known issue with a known fix ? Would it require major surgery to fix this ?
    Any help would be highly appreciated.
    Thanks!

    Hi,
    Welcome to Lenovo Community Forums!
    I’m sorry to hear that right speaker of your Lenovo ThinkPad SL410 stopped working.
    Since the headphones work fine and you hear intermittent audio while pressing the LCD/hinge, chances are that the wire that goes to the right speaker is probably loose or the speaker itself needs to be replaced.
    Refer the hardware maintenance manual to understand how to remove the speaker assembly and check.
    If your system is under warranty, I strongly recommend you to contact our technical support for assistance.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Best Regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • After 10.8.5 bluetooth hardware disapeared and sound control on keyboard stopped working

    after 10.8.5, bluetooth hardware disapeared from system info. Sound controls on keyboard stopped working.
    all works fine in safe mode. i have already zapped the PRAM, applied the combo update and deleted the bluetooth prefs with same results.
    Mike

    Please read this whole message before doing anything.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. 
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below on this page to select it:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef 
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    { sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef 
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. 
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step. 
    Step 3
    { launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef 
    Step 4
    ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef  
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 5
    osascript -e 'tell application "System Events" to get name of login items' | open -ef 
    Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output. 
    You can then quit Terminal.

  • I tried to work this for a telephone system Yvonne but stopped work and not work, what do I do

    Tried to work this phone system iphone3g but stops working system did not speak ..What can I do to restart the phone???

    Post in your native language... your statments make no sense in English.

  • Why does the ipad 2 speaker stopped working after upgrading to ios 8

    WWhy does the iPad 2 speaker stopped working after upgrading to ios 8 why plz respond

    Hi A_S85,
    It appears your iPhone has an issue relating to sound. The following article may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • Laserjet CP1025nw HP system tray has stopped working

    I bought this printer a month ago and about a week ago I started getting the error“HPCP1020SM.exe (64 bit) has stopped working.” then click close then“HP system tray has stopped working.” appears click close. the printer will still print but these errors continue to come up every time I print.  I called HP support but they have no clue.  Thanks for who ever can help.

    Hi  Have you tried installing the basic driver, and the basic driver update to see if you have the same issue? Let me know if you have the same issue using the basic driver. Can you also provide me a screenshot of the error message you are receiving? Firmware update: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&os=228&product=4052972&sw_lang= Basic driver:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang= Basic driver update:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-98162-1&cc=us&dlc=en&lc=en&os=4063&product=4052972&sw_lang=

  • HT201401 I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone, please advice what is the problem? Thanks

    I have I phone 4s and the speaker stop working suddenly, I can hear through the headphone but when I remove the headphone can not hear anything , please advice what is the problem? Thanks

    Thanks for your reply, but what shall I do now ? I bought this phone from china's apple store, and I am in Egypt so there is no warranty for this phone in my county, please advice how can I solve this problem? Is there any troubleshooting tips I can follow to solve this problem ?
    Thanks  

  • IPhone 5 speaker stopped working--no known reason

    My iPhone 5 speaker stopped working. Can't hear anything--music, video, person on phone, Siri. But phone functions and can use phone via Bluetooth in my car.

    When adjusting volume, does it show headphones or speaker?
    Clean the lightning and headphone ports to remove any lint/debris.

  • Yosemite - Bluetooth speaker stops working

    I have an issue where my Bluetooth speaker stops working.  It shows up on the devices list under Bluetooth but when I try to connect it does not do anything.
    Rebooting fixes the problem.   But then the next day when I try to use the speaker again it does not work.
    This started happening with the upgrade to Yosemite.
    Please advise, thanks,
    OS X 10.10.1.  MacBook Pro 15" Retina mid 2012

    Scratch that.  Things have improved in 10.10.2 - I am able to reconnect to the Bluetooth speaker more often, but it does sometimes fail and I have to reboot.

  • Apple 4 Sum time durring call head fone Speaker stop working so what to do?

    Apple 4 Sum time durring call head fone Speaker stop working so what to do?

    No idea what you mean.  Are you asking about a problem with your headphones or the phone speaker?

Maybe you are looking for