P7N Diamond 8 hrs and counting still can't install xp
I just got a brand new system:
Intel core duo e8500
p7n Platimum board
2 x 1 gb corsair value mem at 667mhz
2 x msi 9600GT in sli
2 wd raptors 74g
3 seagate 80 gb
have been trying for 8 hours to get through an install here. I've striped the 2 WDs and am trying to install to them. I've set 3 seagates in raid 5
contantly get bsod referring to nvgts.sys
the only way I've been able to get windows installed is removing all raid settings from bios and loading to one wd raptor. after updating all the nvidia driveers and what not from the live update my system starts to crash within 5 minutes of booting and refers to the same nvgts.sys 90% of the time and other times nv4_disp.dll or no file mentioned the other 10%
the msi live update flashed my bios to current already.
am i just wasting my time here looking for this board to do what it supposed to do?
any input would be greatly appreciated
ok msi support gave me new bios to load and i managed to get the os loaded, now i'm in the same situation as i was after installing it on a single drive that one time... the machine reboots almost every 5 minutes... here are some of the errors:
? means i cannot read the character due to multi colored lines in columns
IRQ_NOT_LESS_OR_EQUAL
STOP 0x0000000? (0x000099BC,0x0000001C,0x00000000,0x80544039)
DRIVER_IRQ_NOT_LESS_OR_EQUAL
STOP 0x000000D1 (0xFFFD4A90,0x00000002,0x00000000,0xBA70D5F3) nvrd32.sys address BA70D5F3 base at BA701000 Datastamp 472236e4
BAD_POOL_CALLER
STOP 0x000000??(maybe C7) (0x00000003,0x?(B)7CF1150,0x88057740,0x88057700
STOP 0x0000008E (0xC0000005,0xBF8065CA,0xB64BEC4C,0x00000000) win32k.sys Address BF8065CA base at BF800000 datastamp 41107f7a
PAGE_FAULT_IN_NONPAGED_AREA was fast reboot could not catch remaining error
Posted: Aug 05, 2008 by Alex
Ok managed to load windows on raid after updating bios u pointed me to. I updated all drivers from msi website.
Now i am getting constant reboots every 3-5 minutes:
following are codes:
? mean i cannot read the character due to multi colored lines in columns
IRQ_NOT_LESS_OR_EQUAL
STOP 0x0000000? (0x000099BC,0x0000001C,0x00000000,0x80544039)
DRIVER_IRQ_NOT_LESS_OR_EQUAL
STOP 0x000000D1 (0xFFFD4A90,0x00000002,0x00000000,0xBA70D5F3) nvrd32.sys address BA70D5F3 base at BA701000 Datastamp 472236e4
BAD_POOL_CALLER
STOP 0x000000??(maybe C7) (0x00000003,0x?(B)7CF1150,0x88057740,0x88057700
STOP 0x0000008E (0xC0000005,0xBF8065CA,0xB64BEC4C,0x00000000) win32k.sys Address BF8065CA base at BF800000 datastamp 41107f7a
PAGE_FAULT_IN_NONPAGED_AREA was fast reboot could not catch remaining error
Similar Messages
-
HT201364 I have all the requirements and I still can't install the update
I have a 3 year old mac, enough memory and hard drive space, snow leopard 10.6.8 installed yet it still says I can't install the update.
Okay,
It would help us to help you if we could have some more technical info about your iMac.
If you so choose, Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You. -
I installed more memory becase I got a message that I didn't have enough how I went from 4g to 16g and still not enough?????
Okay,
It would help us to help you if we could have some more technical info about your iMac.
If you so choose, Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You. -
I cannot install an update on Photoshop 11 because it says I have programs running that must be closed. I have no programs running and I have restarted my computer twice and am unable to install this update. Also, I need the update because the tutorial for 11 shows a completely different screen than I have on my version of 11. Please advise.
Garbage which operating system are you using? Have you tried using the Task Manager/Activity Monitor to close the offending application/process?
-
I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.
I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras. -
I just watched the tutorial and did exactly what it was telling me to do, and I still can't get it done. Once I have selected the file, I get a box that pops up that says "Subscribe now to convert unlimited number of files to PDFs. Subscribe Now. I already have done this! I am a subscriber! Arrrrhhhgggg!
Hello Kathie,
Please let me know what exactly are you trying to do using Adobe online service.
You might try accessing the same service for some other PDFs and check.
Have you signed up correctly at "https://cloud.acrobat.com/" using your Adobe ID credentials.
If the same message pops up, then please visit Contact Customer Care as they could let you know if there is any problem with your account.
Hope to get your response.
regards,
Anubha -
I am trying to download a book on my ipad. It says I need to install itunes. I have itunes already. I frequently get a message to re-install itunes. I do, but I still get the message, and I still can't get the book on my ipad.
you can download a new installer and serial number from Adobe at Adobe - CS2 Downloads
-
I've been having an issue of connecting to wifi. I have restored and set up my phone as a new one and i still can't connect. Also i have restored my network setting also. The wifi button is still grey and i cant switch it on or off.
Hi _Pchay,
Accordign to the artcle below, it looks like you have done all the troubleshooting steps and your next step may be to contact Apple Support.
iOS: Wi-Fi settings grayed out or dim
-Griff W. -
I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?
The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
Be sure it indicates 11.1.3.
If it is, here's further troubleshooting:
http://support.apple.com/kb/TS1538 -
I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
Any insight/wisdom would be much appreciated. ThanksWhen you try to open in PS what happens?
In Bridge do you see icons or thumbnails?
Will it open in ACR in Bridge? -
I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?
You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
I was trying to make sure that all my Apple software was uninstalled, and I still can't remove C:\Program Files\iPod\. I went to the Task Manager and it is not listed in the Processes tab. What do I do now?
Are you looking for iPodService.exe?
Might be better to run services.msc from the run dialog and shut down the service polietly.
tt2 -
i got problem with volume of calls...its on max and i still can hear person on other side really bad...i got 4s
Did you fix the problem? I have the same problem and it has been pain in the neck.
-
HT1420 I have deactivated all 5 computers and I still can't sync my iphone
I have deactivated all 5 computers connected and I still can't sync my iphone
Synching is pretty old for today's Cloud era. What exactly are you needing to do this far?
-
After updating my iPhone 5s to iOS 7.0.5., it has shut down and i still can't turn it back on! I can't even install iTunes on my computers! Yesterday evening I updated it but it didn't work, so i tried to reinstall it and there was written that that i couldn't install iTunes on that computer. So this morning I've tried to install it to another computer but it says the same.. Can someone help me, please?
Are you uninstalling just iTunes? Because if so, you actually have to uninstall five separate programs, and THEN reinstall.
Windows XP: Removing and Reinstalling iTunes and other software ... - Apple
Windows Vista, 7 & 8: Removing and reinstalling iTunes and other software ... - Apple
Follow the steps precisely in those articles.
Maybe you are looking for
-
For Loop and Void Method Questions
Question 1: How would I write a for loop that repeats the according to the number entered, to prompt the user to enter a number (double) between 1 and 100. If the number is outside this range it is not accepted. Question: 2 Also how would I write a f
-
EMac 10.3.9 can't connect to ethernet
When I restarted my old eMac, it could no longer find the internet. I believe the setting have changed or are no longer valid. I tried to use Network Setup Assistant but it always ends up asking me for a DHCP Client ID# or PPPoE acoount information t
-
Deletion of Purchase requisition thru tcode MEMASSRQ
Hi experts, In table MASSFLDLST I have done the following modification thru tcode sm30 Create : - object type = BUS2105 Table name = EBAN field name = LOEKZ The field LOEKZ is now appearing in the tcode MEMASSRQ. But when we execute it, the square b
-
Cannot insert selectItems at the current location
I extended the tag <f:selectItems> to return my own collection, but when I try to insert the tag from palette, I get the message "Cannot insert <selectItems> at the current location because the element is not valid at that location." When I insert it
-
hi, i need screen exit for mi04 tcode .