P7N Diamond - Beeps when usb items are plugged during post

Can i clarify that this is normal behaviour, as ive never known it with other mobo's, it beeps for each item that is plugged in after the intial post beep on bootup, should be the last of my questions hopefully.

thanks, i think i found something in here via google, buried deep in a thread a few days ago, when i 1st built it up, confused the hell out of me. just wanted it clarified.

Similar Messages

  • My Mac Mini doesn't start up when usb devices are plugged in.

    My Mac Mini doesn't start up when usb devices are plugged in.
    It just shows the "White screen of Death" when 1 or more usb ports are used.

    Haha. I just restarted it and it worked. Instead of turning it off and on. But thanks.
    By the way:
    Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
    So I hope it is fixed for now. But could someone also post another solution?

  • Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

    I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
    Is there any workaround to this error?  so that drillthrough can be done even with multiple selection.

    Hi Vikas,
    The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
    Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted. 
    For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
    When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
    1. Select a single Item.
    2. Select all items.
    Hope this helps!
    Please mark as Answer if this helps! Thanks, Rajasekhar.

  • My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

    My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

    it's a hardware issue
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more here
    iphone stuck in headset mode

  • I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in.

    I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in

    Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • Script to detect when USB stick is plugged

    Script to detect when USB stick is plugged to my mac.
    Is it possible?
    Thank you!

    How to invoke a Unix command from Applescript
    Name: toggle-hidden
        Author: rccharles
        Copyright 2010 rccharles
        GNU General Public License
        This program is free software: you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
        the Free Software Foundation,  version 3
        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU General Public License for more details.
        For a copy of the GNU General Public License see <http://www.gnu.org/licenses/>.
    on run
        -- Write a message into the event log.
        log "  --- Starting on " & ((current date) as string) & " --- "
        try
            set results to do shell script "defaults read com.apple.finder AppleShowAllFiles"
            log "results = " & results
        on error errorMsg
            -- Most likely, the variable AppleShowAllFiles does not exit. 
            -- AppleShowAllFiles isn't defined in a newly created account.
            -- The write command below will create the AppleShowAllFiles variable.
            log "Error ..." & errorMsg
            set results to "FALSE"
        end try
        if results = "FALSE" then
            display dialog "Displaying all files.  Finder will restart." giving up after 2
            set the_rc to do shell script "defaults write com.apple.finder AppleShowAllFiles TRUE  ;killall Finder"
        else
            display dialog "Hiding hidden files.  Finder will restart.." giving up after 2
            set the_rc to do shell script "defaults write com.apple.finder AppleShowAllFiles FALSE  ;killall Finder"
        end if
    end run

  • Nano plays music out loud even when ear buds are plugged in?

    Nano plays music out loud even when ear buds are plugged in? its like the external speaker is always on, i cannot figure out how to turn it off....HELP SOMEONE

    You don't have to shout - typing in caps.
    The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
    
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

  • Still print picking list when ALL items are blocked. Is this possible.

    You know what warehouse people are like. When a delivery has all items blocked the picking list isn't printed, and the warehouse guys are wondering why nothing has printed. Of course a list is printed when there is at least one item that is not blocked on a picking list.
    My question is whether it's possible to print the picking list when all items are blocked?. I would expect no items to be printed for picking, but at the bottom of the report I would expect to see a list of items blocked.
    Anyone?.
    Jason

    HI
    1.Kindly chekc the routine in the t code V/27
    2.Against the routine against rthe condition type in the be.lwo path
          Logistics Execution
              Shipping
                 Output Control
                      Output Determination
                         Maintain Output Determination for Outbound Deliveries
                                Maintain Output Determination Procedure
    3.if it is in warehouse management then check in the tocde OMLV
    REgards
    Damu

  • Line items are missing during transferring ITS to EBP--tricky problem

    Hi,
    We are using EBP 2.0 version.
    Some shopping carts line items are missing while transferring shopping cart data from ITS to EBP.
    This is happening randomly.we had checked all the shoppping cart related tables in EBP.
    For example in my shooping cart 4 items are there,during transferring shopping cart data from ITS to EBP all 4 items are updating for all the shopping cart related tables except account assignment table.
    In account assignment table for this particular shopping cart only 3 items are updated except first one.
    This is happening randomly for few of the shopping carts that too most of the cases first  item of  the shopping cart was not updating reqacct table(this is account assignment table for shooping cart items).
    I have debugged entire scenario,but i couldn't find the problem.
    any one could you please advise me....why this is happening?whether it is a version problem?
    Thanks,
    Ravi

    Hello Ravi,
    I guess you already checked OSS notes for this.
    Have you checked in the area of ITS ?
    When ITS sends data to EBP, only the actual screen data is sent:
    - item procurement data from basic data
    - item accounting data from accountig tab
    then this data is used to update the SC.
    If you have debugged those 2 screens, you should see what is happening.
    You say that only 3 reqacct lines are updated: does it means that you have the 4 lines previously created, or only 3 ?
    If you change one line item quantity, you should see this updating the reqacct. Same if you go directly in accounting tab.
    Finally, there are two options:
    - this is an ABAP error, so you should catch it in debug
    - this is an infrastrucute error (ITS is not sending the data), so you should get the data sent by ITS in debug mode
    Sometimes in productive environment with an heavy loaded ITS, you can loose some data. Available memory is not enough to fill in correctly ITS session containers.
    Rgds
    Christophe

  • HP530 not hibernating when USB WLAN stick plugged in, works unplugged.

    This problem came up when the laptop's builtin wlan card didn't connect to our wlan because of the 13 byte key (5 byte key worked fine but my dad wants to use the 13 byte key). I tried using an external USB wlan stick which connected fine to our network. However hibernating doesn't work when the stick is plugged in. I have tried s2disk and pm-hibernate, both fail. I have also tried two different wlan sticks, hibernation fails with both.
    Buffalo Airstation Wireless-G:
    Bus 001 Device 005: ID 0411:00da MelCo., Inc. WLI-U2-KG54L
    A-Link WL64USB:
    Bus 001 Device 006: ID 0ace:1215 ZyDAS WLA-54L WiFi
    Here is how the hibernation fails. Screen goes black except a white cursor blinking in the corner. The login prompts in consoles remain active and I can change consoles with CTRL-ALT-F1 etc. Login prompts don't take keystrokes though.
    However, hibernation does work when the sticks are not connected.
    This isn't a really big problem but trying to remember plugging/unplugging the stick is quite annoying.
    Is there any way to fix this?
    P.S. I will post more after I get the logs and some other info.

    /var/log/pm-suspend.log
    Initial commandline parameters:
    Thu Jun 18 11:01:57 EEST 2009: Running hooks for hibernate.
    /usr/lib/pm-utils/sleep.d/00auto-quirk hibernate hibernate: Adding quirks from HAL: --quirk-vbe-post
    success.
    /usr/lib/pm-utils/sleep.d/00logging hibernate hibernate: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686 Intel(R) Celeron(R) M CPU 420 @ 1.60GHz GenuineIntel GNU/Linux
    Module Size Used by
    i915 150568 2
    drm 137440 3 i915
    i2c_algo_bit 5432 1 i915
    i2c_core 20616 3 i915,drm,i2c_algo_bit
    ipv6 259252 22
    usbhid 35168 0
    hid 40064 1 usbhid
    zd1211rw 44376 0
    joydev 9536 0
    snd_seq_oss 29696 0
    snd_seq_midi_event 6004 1 snd_seq_oss
    snd_seq 47856 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6016 2 snd_seq_oss,snd_seq
    serio_raw 4984 0
    sg 25352 0
    psmouse 54632 0
    pcspkr 2196 0
    uhci_hcd 22404 0
    yenta_socket 23968 1
    rsrc_nonstatic 10708 1 yenta_socket
    iTCO_wdt 10584 0
    iTCO_vendor_support 2840 1 iTCO_wdt
    ehci_hcd 34688 0
    e100 30684 0
    mii 4468 1 e100
    usbcore 134576 5 usbhid,zd1211rw,uhci_hcd,ehci_hcd
    wmi 6248 0
    container 3092 0
    video 16292 0
    snd_hda_codec_conexant 19796 1
    output 2388 1 video
    snd_hda_intel 24872 0
    snd_hda_codec 60212 2 snd_hda_codec_conexant,snd_hda_intel
    snd_hwdep 6904 1 snd_hda_codec
    snd_pcm 66936 2 snd_hda_intel,snd_hda_codec
    snd_timer 19132 2 snd_seq,snd_pcm
    snd 51108 9 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    soundcore 6112 1 snd
    snd_page_alloc 8124 2 snd_hda_intel,snd_pcm
    intel_agp 25436 1
    agpgart 29332 3 drm,intel_agp
    thermal 15056 0
    evdev 9312 9
    processor 38720 2 thermal
    fan 4056 0
    button 5700 0
    battery 9816 0
    ac 3832 0
    autofs4 23256 2
    arc4 1588 4
    ecb 2452 4
    b43 126000 0
    ssb 37848 1 b43
    rfkill 9456 1 b43
    pcmcia 33036 2 b43,ssb
    mac80211 158652 2 zd1211rw,b43
    cfg80211 36524 3 zd1211rw,b43,mac80211
    led_class 3416 1 b43
    input_polldev 3132 1 b43
    pcmcia_core 32232 5 yenta_socket,rsrc_nonstatic,b43,ssb,pcmcia
    rtc_cmos 10156 0
    rtc_core 16400 1 rtc_cmos
    rtc_lib 2324 1 rtc_core
    ext3 127100 2
    jbd 45640 1 ext3
    mbcache 6584 1 ext3
    sr_mod 14756 0
    cdrom 33856 1 sr_mod
    sd_mod 25328 4
    ata_piix 21816 3
    pata_acpi 3828 0
    ata_generic 4536 0
    libata 156908 3 ata_piix,pata_acpi,ata_generic
    scsi_mod 100404 4 sg,sr_mod,sd_mod,libata
    total used free shared buffers cached
    Mem: 1026232 479124 547108 0 31080 243848
    -/+ buffers/cache: 204196 822036
    Swap: 2048248 14304 2033944
    success.
    /usr/lib/pm-utils/sleep.d/00powersave hibernate hibernate: success.
    /usr/lib/pm-utils/sleep.d/01grub hibernate hibernate: not applicable.
    /usr/lib/pm-utils/sleep.d/11netcfg hibernate hibernate: :: pirun down [BUSY] [DONE]
    success.
    /usr/lib/pm-utils/sleep.d/49bluetooth hibernate hibernate: not applicable.
    /usr/lib/pm-utils/sleep.d/55NetworkManager hibernate hibernate: success.
    /usr/lib/pm-utils/sleep.d/75modules hibernate hibernate: not applicable.
    /usr/lib/pm-utils/sleep.d/90clock hibernate hibernate: not applicable.
    /usr/lib/pm-utils/sleep.d/94cpufreq hibernate hibernate: success.
    /usr/lib/pm-utils/sleep.d/95led hibernate hibernate: not applicable.
    /usr/lib/pm-utils/sleep.d/98smart-kernel-video hibernate hibernate: success.
    /usr/lib/pm-utils/sleep.d/99video hibernate hibernate: success.
    Thu Jun 18 11:01:59 EEST 2009: performing hibernate

  • Items Moving on Paper Layout When Other Items are Moved

    I am new to Oracle Reports development, so I apologize for the elementary question in advance. I could not find a solution searching the forum.
    When I am moving a text item on the paper layout editor to reposition it other items are moving along with that item. I have set both the confine and flex properties off. What am I missing here?
    Thanks in advance!
    Kyle

    Problem solved.
    I just realized that the flex should be turned off since this option is used to keep item relations together when one item moves.

  • Extremely slow performance when external drives are plugged in.

    I've had lots of freezing issues during startup just recently. After a lot of messing around I removed an iOmega Firewire HDD that was constantly plugged in and the freezing issues have gone. Great! But as I tried to plug it back into my machine once everything had loaded up, the machine became unusably slow.
    I've also tried plugging in USB drives, like my iPhone, camera and memory stick and it has the same effect.
    Anyone else had this same problem or any ideas how to fix it?

    HI,
    *"I've also tried plugging in USB drives, like my iPhone, camera and memory stick and it has the same effect."*
    How much free space on the startup disk? Might be an underlying issue ...
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
    If you need to free up space on the startup disk go here.
    http://www.thexlab.com/faqs/freeingspace.html
    If free space is not an issue, then boot from your install disc and run Disk Utility.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    Carolyn

  • K9A Platinum locks up when USB ports are used

    When I plug my external harddrive or zune into a USB port in the back my computer will lock up and I have to do a hard restart. The front USB ports won't even work. I'm running vista ultimate just in case that info helps.

    Read Moan Guide 1st.
    Does it work in XP?
    Look here how to fix front USB connectors: If you are having problems with USB ports, read this topic.

  • Why won't my mac start if USB devices are plugged in?

    This behavior just started in a system that had been stable for months -- except for OS upgrades. Not sure if this is about the motherboard USB ports or possible the power supply failing. Here is the situation: The Mac Pro boots normally from the power on button if the only usb device attached is the keyboard / mouse. If I plug additional USB 2.0 devices (Wacom tablet, IPod) into the usb 2.0 ports on the front or back of the computer, then when I hit the power on button I just get a "click" noise and no boot. If I plug the Wacom and the iPod into powered usb ports -- like the ports on the back of the monitor -- then it will boot normally. This tells me that the USB ports on the motherboard are not getting / delivering the voltage they need at boot. Does this sound right? Any thoughts or ideas? Is there any way to test USB ports? Or to test the power supply?

    My mac is still under applecare. Is it worth taking in to Apple Store?
    What would they even find? Could I need a new motherboard or a new power supply? This is a new problem, to me it suggests some kind of system partial failure. But maybe this is just what happens on older hardware as the software gets updated. Another idea for a solution would be to get a Sonnet USB 2.0 Pci-e card and plug that into the motherboard and use those USB ports, but I have no guarantee that would work better -- and solve the fails-to-boot problem. $50 to get a card and try it...

Maybe you are looking for