P7N Diamond, need help

Hello, i have built a new machine and now after a few days i think my graphic card died. Computer starts with gpu fan at 100% but thats about it, screen is blank.
Havent tried to switch graphic card yet, gonna buy a cheap one tomorrow, i suspect the psu but it should be ok, hmm =)
Anyway my system, i hope any of you can help me out.
MSI P7N Diamond
Intel Core 2 Duo 2.66 8200
OCZ nVidia SLI XTC 2x2048MB DDR2 PC2-6400 800MHz
1x Western Digital Raptor 150gb sata
1x Seagate 500gb 7200.11 sata2
Gigabyte 8800 GTS 512
Cooltek 600W Modular ATX2.2
3.3V 24A
+5V 25A
+12V V1 20A
+12V V2 20A
+12V V3 20A
+12V V4 20A
-12V 1A
+5VSB 2.5A
It should be able to handle 41A on +12v1 and +12v2 together and max 530W (52.5A) on all 12V at once.
I am not very good at explaining in english but the psu should be high quality and was best rated by a swedish oc site.
Before i bought this i read alot on different sites to find out if i needed 26A on one rail or not and some said it was needed and some said
it works great with just a high quality psu.
I have also tried to remove everything except the graphic card, cpu, memory, and tried it with only 1 stick.

I solved it, thanks for the replies. Dont know what was causing it, i removed the motherboard from the case and it worked.
But there are still some issues, but i dont know what =) I have tried to overlock also but it isnt going very well, i dont know why its failing if it is the memory or if i dont give enough voltage... i made it boot at 4 ghz and the stress test with Orthos failed when memory was involved 8(
The thing i dont get is if i choose manual and set the ram memory at 800 mhz, does it stay there when i pick a higher fsb or does it secretly overclock =)
Also everytime i boot up vista 64, just before the login screen appears, when things work it fades nice to the login screen but when something is wrong it looks like a sick sack or how its spelled, pattern in black before the screen appears, even if i dont overclock at all.
Does any of you know what voltages that i should stick with? I would like to have the whole bios at manual but i dont know what most of the commands do, like the terminator, gtl settings =)

Similar Messages

P7N Diamond / Q6600 / HELP!

Intro
Good Afternoon. I have searched everywhere for information regarding the issues I’m having and haven’t found anything, so I though id ask here. About a year ago I built two computers using the exact same parts (one for me and the other for a friend of mine). My friends build has been running perfect since day one, with no issues or errors. Mine however, has been a problem since I turned it on. I don’t want to post a confusing wall of text, but want to give as many details as possible, so here goes.
Problems
1)   Will not run with optimised settings since first install - Just restarts before starting windows. (Only boots ok when FSB is set to 1333)
2)   Looping Restarts – After powering on it will restart itself between 3-6 times after boot screen, then successfully boots onto windows ok.
3)   Crashing to Desktop/BSOD’s – Mainly runs ok when on desktop/applications/internet. Games are the issue. (Fixed some errors by replacing CMOS Battery. Main BSOD error “Hardware Error – Please contact your manufacturer”
Previous Tests Done
1) Cleared BIOS settings
2) Stripped it down to barebone (outside case), and removed everything It didn’t need to run.
3) Tried changing RAM - Dual/Single Channel – One stick at a time.
4) Memtest, Futuremark, Prime95, GPU-Z, CPU-Z and others.
*Currently have processor on RMA as it died (Have signal to monitor from Graphics Card, but no boot, so testing on the fly is impossible*
NOTE: All drivers are up-to-date, Computer Temperatures are more than low enough
*BIOS changes/setup*
Advanced BIOS Features:
   * CPU Feature
   o Execute Bit Support = disabled
   o Set Limit CPUID maxVal to 3 = disabled
   * Chipset Feature
   o HPET = disabled
Cell Menu:
   * D.O.T = disabled
   * Intel EIST = enabled
   * SLI Ready Memory = enabled
   * System Clock Mode = Manual
   o FSB Clock = 1333
   o DRAM Clock = 800
   * Adjust CPU Ration = 9
   * Advanced DRAM configuration
   o DRAM Timing Mode = Auto
   * Adjust PCI-E Frequency = 100
   * Auto disable DRAM/PCI Frequency = enabled
   * CPU Voltage = Auto
   * DRAM Voltage = Auto
   * NB Voltage = Auto
   * SB Voltage = Auto
   * FSB Terminator = Auto
   * --- All other voltages are left on "Auto" ---
   * Spread Spectrum = disabled
Computer Specs:
Case: Thermaltake Armour+ VA3000
MB: MSI P7N Diamond
MS-7510 Ver1.0 (Rev1.0) (A7510-NMS100) (Bios Ver: 1.4)
HDD: 1 X Western Digital 500GB - SATA (WD500DAAKS)
GPU: 1 X BFG GTX-280OC PCI-E
CPU: Intel Core 2 Quad Q6600 - 2.4GHZ/8M/1066/05A (SLACR)
CPU FAN:Zalman CNPS9500 AM2
MEMORY: Corsair Dominator-XMS2-PC8500 1066Mhz DDR2 – 2.1v
OTHER CARDS: Sound Blaster X-Fi Xtreme Audio (Free with Motherboard)
OS: Windows Vista Ultimate 64Bit – SP1
PSU: Hiper Type-M SLI 1000w
*Air Cooling: 5 x Internal Fans, 9 including CPU/GPU/PSU/RAM
PSU IMG:
Additional Information:
As mentioned earlier, my Q6600 is in the process of RMA so can’t really do any testing with Bios or anything else. Another thing… When on the phone to Intel’s Technicians. They said that due to the board only having 1.8v DIMM’s, they said because my RAM was 2.1v, it is those that are causing all my issues. In relation to the RAM spec on the listed computer configuration, could anyone confirm that? As I asked Corsair before the build and they said it would be fine.
I hope I’ve given all the required details, needed for a conclusion to my problems or even a guess.
Overall, Thankyou for reading. Any help/advice is much appreciated.

Quote
1) Will not run with optimised settings since first install - Just restarts before starting windows. (Only boots ok when FSB is set to 1333)
Quote
o FSB Clock = 1333
Mh, did you mistype something, or are you talking about overclocking when you mention "optimised settings"? I mean: FSB 1333 is already higher than the native FSB Speed of a Q6600 (=266 MHz or 1066 MT/s effectively). Can you explain again what you mean? Because if you really overclocked the FSB/CPU to 333 MHz FSB CLock Speed (and higher) all your problems may simply be the symptoms of non-stable overclocking settings (which is nothing unusual).
Quote
MEMORY: Corsair Dominator-XMS2-PC8500 1066Mhz DDR2 – 2.1v
Quote
Another thing… When on the phone to Intel’s Technicians. They said that due to the board only having 1.8v DIMM’s, they said because my RAM was 2.1v, it is those that are causing all my issues. In relation to the RAM spec on the listed computer configuration, could anyone confirm that?
Yes and no. The native speed of your modules is DDR2-800 @1.8V +/- 0.1V (JEDEC Standard) which means that such a setting is compliant with the industry specifications for DDR2 Memory and should pose no stability risk to the system (given that none of the modules are faulty).
DDR2-1066 on the other hand is an OC rating that requires you to raise the voltage to 2.1V and thereby above industry specifications. Stability problems @DDR2-1066//2.1V are not unusual. So in that perspective, the stuff the Intel Technicians pointed out to you is absolutely correct.

Problem with p7n diamond please help

i have a new p7n diamond
i connect the power supply plugs, hard drives, video card(n260gtx new too), etc
when i push the power button the processor cooling fan run but the pc do nothing
don't gave me any beep from a bad connection
nothing
it just don't start
other thing
when i plug the video card power, the video card cooling fan don't start yet
please help!
basic from my PC
intel core 2 quad
2 hard drive 500gb
4g ddr
n260gtx 896mg

Dadilo, you have gone to some length but sadly no positive result, but at least you have cleared some of the ifs and buts. i have looked at your mobo bios even so it says it supports your cpu q6600 it seems there has been a few updates (see links, particularly please pay attention to the pointer in pictures). you have these options left to you.
1- put the pc on it's side and take the 240 volt plug out (no power what so ever) and clear the way from any cables etc.. and remove the mobo battery with a Small screw driver (push the clip to one side the battery pups out) and hold it in your Palm for ten second or so then put it back and put everything back make sure the single memory is firmly in place so is the graphic card. then connect the power and all cables etc the power the pc.
2-your last option before you give up is try another cpu on the mobo preferably core 2 duo rather than quad and if you get it working your next move is to update the bios and i do not know how good you are in updating bios???. if none of these works then sadly the mobo is faulty in my opinion but i may be wrong :
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot037.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot038.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot039.jpg

P7N2 Diamond NEED HELP XD

hi
i need help settings up my P7N2 diamond aka 790i Ultra mobo
the bios setitngs are so differnet and labled all different to any other 7xx chipset so im confused to heck
I AM RUNNING 1.1 BIOS update
so here are my specs
Intel Core 2 Quad Q8200
G.Skill Ripjaws DDR3 1600Mhz (2x2GB)
GeForce GTX260 SLI x2
Corsair PSU TX850 (850 watt, sli cert)
1 HD, 1 DVD
So i want to overclock my CPU to run 2.8Ghz 1600Mhz FSB but i am struggle to understand the voltage and the way its labled on this board
Intel spec sheet says my cpu voltage should be 1.1 - 1.36 max but on the bios when i change cpu volts its like 0.12500 before it gos into the red ?
now of the voltages are labled how they were in my 780i or 750i, etc
on 780i i had stable 2.8 ghz 1600mhz fsb here are the voltages i had
cpu = 1.36
fsb = 1.3
SPP = 1.4
MCP = 1.55
how do i translate these voltages on the cell menu ? what is what, on the cell there is no fsb, mcp or spp voltages
please help me i cant get a single tiny overclock to even get into windows and im starting to think its due to a poor bios, my first MSI product
please help
thanks

Do you have Real Temp & CPU-Z utilities? Real Temp will have the VID of your CPU. CPU-Z will show your CPU voltage & other useful info. When running stock, what does CPU-Z say the CPU Volts are? In bios Cell Menu, CPU V. is in increments of added voltage, as an example, if your CPU is at 1.24, & you want 1.36, change the Cell Menu CPU V. setting to +0.12.
SPP = 1.4 (This looks like a NB V. setting)
MCP = 1.55 (This looks like a SB V. setting)
In 'Advanced Bios Features' - 'Chipset Features', disable HPET. In bios 'Cell Menu', 'System Clock Mode' - 'Manual' (set desired settings accordingly) , 'D.O.T.' - disable, 'Spread Spectrum' - disable.
Use the Forum Search Button on P7N2 threads if you haven't yet. There should be some useful info that will help.

MOVED: P7N2 Diamond NEED HELP XD

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=131285.0

Do you have Real Temp & CPU-Z utilities? Real Temp will have the VID of your CPU. CPU-Z will show your CPU voltage & other useful info. When running stock, what does CPU-Z say the CPU Volts are? In bios Cell Menu, CPU V. is in increments of added voltage, as an example, if your CPU is at 1.24, & you want 1.36, change the Cell Menu CPU V. setting to +0.12.
SPP = 1.4 (This looks like a NB V. setting)
MCP = 1.55 (This looks like a SB V. setting)
In 'Advanced Bios Features' - 'Chipset Features', disable HPET. In bios 'Cell Menu', 'System Clock Mode' - 'Manual' (set desired settings accordingly) , 'D.O.T.' - disable, 'Spread Spectrum' - disable.
Use the Forum Search Button on P7N2 threads if you haven't yet. There should be some useful info that will help.

MOVED: Problem with p7n diamond please help

This topic has been moved to Intel Core 2 Duo/Quad boards.
https://forum-en.msi.com/index.php?topic=122454.0

Dadilo, you have gone to some length but sadly no positive result, but at least you have cleared some of the ifs and buts. i have looked at your mobo bios even so it says it supports your cpu q6600 it seems there has been a few updates (see links, particularly please pay attention to the pointer in pictures). you have these options left to you.
1- put the pc on it's side and take the 240 volt plug out (no power what so ever) and clear the way from any cables etc.. and remove the mobo battery with a Small screw driver (push the clip to one side the battery pups out) and hold it in your Palm for ten second or so then put it back and put everything back make sure the single memory is firmly in place so is the graphic card. then connect the power and all cables etc the power the pc.
2-your last option before you give up is try another cpu on the mobo preferably core 2 duo rather than quad and if you get it working your next move is to update the bios and i do not know how good you are in updating bios???. if none of these works then sadly the mobo is faulty in my opinion but i may be wrong :
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot037.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot038.jpg
http://s240.photobucket.com/albums/ff177/kourosh22/?action=view&current=ScreenShot039.jpg

Users running the P7N Diamond and QX9650 please weigh in. I need help...

OK, I'll start from the beginning. I had an EVGA 780i mobo, which ran a Q6600 at 3ghz quite easily. Well, I decided that I had money to burn so I ordered a QX9650. It would not work on the EVGA, the cpu voltage and cpu fsb voltage would not adjust no matter what I tried. So, I popped the cpu into my kids rig, which has a DFI X38 mb and the cpu worked perfectly, voltages adjusted, multiplier adjusted, etc. During the RMA process to EVGA, I got an MSI P7N Diamond to run SLI with. Stuck the cpu in it and away I went into Vista 64, all happy. I had to bump the memory voltage up to 1.95 volts, but that was it. I then decided to raise the multi from 9 to 10. I set it, warm booted and tested it in Vista. 100% stable. 2 days later, I attempted to turn my computer on. No post. I had to power off/on very quickly to get it to post, at which point I got an error message that the cpu vid had failed or there was a mismatch with the cpu to fsb ratio, hit F1 to enter setup or F2 to load defaults. I e-mailed MSI and received beta P05 and it was just downhill from there. I couldn't cold boot at all, stock settings, OC settings, voltages adjusted, it didn't matter. So back to the shipping bios. I got a new beta this morning, dated 2/18, and it was the exact same.
Issues with both beta's:
1. Cannot cold boot.
2. Logitech G15 acts erratically prior to entering Vista.
Things I have tried:
1. Raising Vcore.
2. Raising NB/SB voltages.
2. Raising FSB Terminator voltage.
Nothing helps. MSI simply told me not to OC and run at stock and that there was no problem. Is there anyone else out there that has this cpu and mb? If so, can you post your experience with it and let me know if there is something I am doing wrong or could try?

Below is the actual transcript that I had with MSI on this issue. As far as they are concerned, I don't need to change the multiplier on my QX9650. (Start reading from the bottom up for the actual order of the conversation)
Quote
MSI Tech. 02/19/2008 Then, there is no problem with the mb.
End User 02/19/2008 There doesn't seem to be any issues with usb while on using the shipping bios, I only see it when I flash to the beta bios'.
MSI Tech. 02/19/2008 If the stock bios also has the usb issue then try: Have all USB device connected to the rear USB ports that are build onto the mb and retest with all USB header on the mb be removed from any front USB connections or adapter connections and retest. If all steps have been tried and problem still persists then please kindly refer to our website for manufacturer warranty RMA info/request: http://www.msicomputer.com/support/CustomerS.asp
End User 02/19/2008 No change. I cannot even cold-boot at stock settings with this. Also, it still kills my Logitech G15 keyboard randomly. i have to unplug it and plug it back in to get it to power up, and that is only after I boot into Vista. Back on the shipping bios for now at stock settings. Please, if you would, keep me informed of changes or progress. Thanks.
End User 02/19/2008 Thanks! I will poat back if it helps or not.
MSI Tech. 02/19/2008 Beta bios v111 attached to this form.
End User 02/19/2008 Is there any other beta bios' that you have that could help? The P05 didn't work out so well, maybe you have a newer one that I could try? It seems odd that it is only on a cold boot that I have issues and not on warm boots. I am willing to try anything you got at this point!
MSI Tech. 02/19/2008 Sorry, but MSI did not see any issue with using QX9650 processor.
End User 02/19/2008 So are you saying that as far as MSI is concerned, there is no issue with the QX9650 and the P7N Diamond motherboard? I am not asking you for advice on hot to OC it, I am asking you if you know of the issue and are looking into it to try and correct it. If you do not think there is an issue and are not going to investigate it, then I will be very disappointed.
MSI Tech. 02/19/2008 If there is no problem with standard bios and no OC then you can refer to other website/forum for OC suggestions or settings. MSI does not provide these setting/suggestions since it can cause damage to the components.
End User 02/19/2008 Also, I am unable to use the Dual Core center, as I am running Vista 64. It does not load properly when using this OS.
End User 02/19/2008 As of now, it boots and runs fine with the shipping bios and no OC. But, why would I have paid such a high premium to get a QX9650, that has an unlocked multiplier, if I cannot use it? Is this strictly an issue with the newer 45nm Intel processors or is it something else? If not being able to use my cpu's unlocked multiplier is "ok", then I may return the board for a refund.
MSI Tech. 02/18/2008 What is the problem when system uses the standard bios and not OC?
End User 02/18/2008 Is there a fix on the way or is it just a problem with my hardware? I have it back on the shipping bios and it is at least cold-booting now, as well as my G15 is working. I upped the NB voltage a hair above auto, maybe this has somethinng to do with it?
MSI Tech. 02/18/2008 Use the standard bios and use software to OC: http://global.msi.com.tw/index.php?func=downloaddetail&type=utility&maincat_no=1&prod_no=1372
End User 02/18/2008 I was way too quick to say everything is OK. I now have cold boot issues aplenty. 9 times out of 10 it will not post on a cold boot, but will warm boot. I have to power off then on real quickly to get it to post at stock speeds. Also, my Logitech G15 started to act erratic with the P05 beta. I am back on the shipping bios until I hear from you.
End User 02/18/2008 Thanks you for the beta. I flashed to it, cleared the cmos and set everything back up and now I have a new problem. Even though I have disabled the EIST function in the bios, it still seems to be on. i am using cpu-z version 1.44.1 to monitor the multiplier and it randomly shifts between whatever I set it to and 6. It is even doing it when the system is loaded, ie playing games. Please, help!
MSI Tech. 02/18/2008 Beta bios attached to this form.
End User 02/18/2008 Everything is stable 100%. But, on my QX9650, I set the multiplier to 10X to run at 10x333=3.33ghz. It was fine until this morning. I turned the computer on and it would not post. I powered down and repowered it up and it siad the cpu vid had failed or errored, hit F1 to enter setup or F2 to load defaults. I entered setup and the multiplier was set back to 9x. I left it there and am ok now. Is there a beta bios that helps out operations with the newest Intel 45nm processors, such as the QX9650?
I have absolutely no issues in Vista itself, it is 100% stable. It is only on a cold boot that I have serious issues. And yes, I got 3 in a row, went to work for a few hours, then came home and bam! No cold boot. Also, I don't know how comfortable I am raising the vcore that much, as 1.21-1.25 is the normal operating range. 1.3625 is aweful high. Now, with the 65nm quads, that is more in the range of what would be needed, but no way should it be necessary to pushh this QX9650 to a meeger 3.33ghz. As far as temps go, I have the processor watercooled, so no worries there. I am away from home now until Saturday morning, so I can't test anything until the weekend.
Thanks alot for the responses!
Shawn

MSI P7N Diamond - New PC Build - Need Help Posting

I just finished connecting my P7N Diamond out of the case and powered on my new build for the first time and saw BIOS version, HDD information, and the bad checksum message on the screen. I also saw the "Press DEL to enter BIOS" and the "F2 To Continue" messages.
Pressing the DEL key on the keyboard resulted in nothing happening at all. I soon realized that the keyboard wasn't responding and I had no num lock light at all after pressing the Num Lock key multiple times. I started with a generic, USB keyboard and then swapped keyboards to an older, still working one I had with a PS/2 connector.
Still no keyboard lights but magically it entered BIOS after I plugged it in the PS/2 socket and immediately asked if I wanted to exit BIOS without saving. Pressing the "Y" key did nothing. Pressing <ESC> did nothing. The keyboard seemed frozen.
I pressed the RESET button on the motherboard and this caused a re-boot but now with a black screen (no messages at all). I powered it down, removed the power cords and then pressed the "clear CMOS" button. Re-connected the power cords and powered it on; but still a black screen. Powered it down, removed the power cords and removed the battery for 1 minute (I even pressed the clear CMOS button again). Re-connected the power cords, powered it up and still have a black screen.
I know this is the place where all the experts hang out, so any help will be appreciated.

Just an update...
New build is working very well at this point.
I've set the voltage in BIOS to 2.1 for the memory and installed Vista Ultimate, updated it via Windows Update site, applied the memory patch. I've discovered that I have a bad stick of memory as no matter what slot I place this one stick of memory in, the PC fails to post, so I'm running with 3x1GB sticks. I've ordered new memory that should be here today; Corsair TWIN2X4096-6400C5DHX.
The only problem I've encountered thus far is with one of my NVIDIA RAID arrays in "Degraded" status (mirror broken). This happened after I had applied the latest MS patches and a re-boot. I didn't suspect a HDD failure because the drives are new and the status of each drive was displaying as HEALTHY. I did my research on this site and discovered the solution which was to delete one of the two drives (I chose the one with the least amount of data) from the array and then added it back into the same array. The re-build took about 2 hours (they are 400GB Segate drives) and now it's working as advertised. I suspect a software problem caused this as one of the two drives was showing that it had less data (used) than the other drive.
My next steps are to install the new memory, test it with memtest86+ and then begin the OC ritual.
Thanks again for your help, Jason and Aaron Yuri.

HELP! - Voltages for Overclocking Q9450 on the MSI P7N Diamond (780i chipset)

Hey. I fully understand the settings as far as frequencies go, but am a total voltage newb. No matter what I do I cant seem to get a stable vista load up with my voltage settings.
Please help me by providing suggested voltage settings for my hardware.
CPU - Intel Core2Quad Q9450
RAM - 6 gigs of DDR2-800 rated at 2.1V
VIDEO - Dual Nvidia Geforce 8800GT's in SLI
MOBO - MSI P7N Diamond, based off the Nvidia Nforce 780i SLI chipset
My cooling is sufficient, and I have the BIOS version 1.2
I also turned off all of the overclocking not friendly functions, example: spread spectrum, and DOT, ETC....
I am trying to run my CPU at 3.2 GHZ (400 mhz before multiplier)
my settings I want are (as shown in the P7N bios)
System Clock Mode - Manual
FSB clock - 1600
DRAM clock - 800
Please help me by providing the proper voltages for my setup
Everything I need is marked by "???"
CPU Voltage - ???
DRAM Voltage - (already have, its 2.1)
NB voltage - ???
SB voltage - ???
NB Memory reference voltage - ???
DIMM memory reference voltage - ???
Memory terminator voltage - ???
CPU GTL reference voltage - ???
NB GTL reference voltage - ???
FSB terminator voltage - ???
SB sleep mode voltage - ???
PCI Expander PLL voltage - ???
For the sake of you not typing too much, if you specify voltages, any that you do not specify will be assumed to be left at [AUTO]
PLEASE help me by providing some voltages for me, as I have absolutely no clue what to put for them. If you have any questions about my hardware feel free to ask, and any help is GREATLY APPRECIATED

Quote from: nihilkrist on 08-October-08, 08:03:22
adjusting gtl ref. voltages isn't very difficult, but it is probably best to learn the basics first.
So, basically, increase the fsb a little. So, for example, from 1333 to 1400. See if it's stable, if it isn't try bumping up vcore one notch and try again. If not try Northbridge. Then later move on to stuff like the fsb term.
Test stability using prime95, there is a 64-bit multi-core aware version floating around somewhere. Try the ftp server linked to in the "hot use prime95" sticky on here.
Tbh with your OC you shouldn't need to touch any other voltages, or really use the gtl ref settings. What exactly is "sufficient" cooling though? Stock?
*EDIT: on a side note, just so you don't think I'm deliberately being awkward not telling you specific voltages, they wouldn't do you any good. Every cpu/mobo can handle different freq. at different voltages. Also, use cpu-z to check on your actual voltage and make sure you don't raise it beyond 1.3625 (I think that's right, it's 1.36something anyway)
Thanks for the tips. The reason I wanted to jump straight to FSB 1600 is because the MSI p7n is really picky and only likes 1:1 ratios.
My "sufficient cooling" is an aftermarket heatsink, high performance thermal paste, and MASSIVE airflow through my case. If you want specifics, its the Scythe Zipzang
Quote from: AaronYuri on 08-October-08, 09:05:16
CPU Voltage - No one can tell you this.
NB voltage - Depends on what frequency you want
SB voltage - What's your HDD setup?
NB Memory reference voltage - Auto
DIMM memory reference voltage - Auto
Memory terminator voltage - Auto
CPU GTL reference voltage - Depends on speed and other voltages
NB GTL reference voltage - Same as above
FSB terminator voltage - Depends on CPU voltage and CPU/FSB clock speed
SB sleep mode voltage - Auto
PCI Expander PLL voltage - Auto
My recommendation is do some reading. Guessing leads to dead hardware.
6GBs smells like mixing modules... Or do you have 3 modules?
First of all, I already stated the frequencies that I wanted in the top post, and fairly clearly at that.
CPU shouldnt be too hard to figure out, as there are very few to choose from. I'll try to get back to you on that one
I have 5, 7200rpm SATA 3.0 drives. It sometimes runs with only 4, as one is a hot swap.
My ram IS mixed, unfortunately. I'm using 2x 1gig sticks, and 2x 2gig sticks. However, both sets have heatsinks, and are rated at 800mhz, 4-4-4-12, 2t, timings. (2.1v)
I AM running them in dual channel.
If this helps you suggest voltages please do, If not, then I will just have to start trying using nihilkrist's suggestions.

New Need Sink needed for MSI P7N Diamond nForce 780i SLi (Socket 775)

Hi Guys,
I've been having a problem with my machine where it will be working away as and then suddenly restart. I haven't been able to pin point the problem as it can happen regardless of applications or load thats on the machine. I've also run a couple of app's to check the RAM and its fine. The only thing I've been noticing is that the 4 cores of my Q6600 seem to be running a bit hot. On average on Idle there running between 45-55oc. Does this seem normal? I'm thinking that the cpu might be over heating when I'm running apps. I've seen one of the cores up around 68oc when under a bit of load. I'm using the stock heat sink at the moment and would like to cool things down it see if that helps. Can anyone recommend something suitable for my motherbroad.
Thanks
Garret

Quote from: Garret C on 15-October-09, 17:22:47
Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB)
MSI P7N Diamond nForce 780i SLi (Socket 775) PCI-Express DDR2 Motherboard with Free Creative X-FI Card
Thermaltake ToughPower 750W Modular Power Supply
My Q6600 (also G0/SLACR but don't know what you mean by "Pro") is OC'd to 3.4GHz and has had no problems running stable. Highest temps during OCCT/Linpack and LinX/Linpack peak at 80C 1st/2nd cores - 76 C 3rd/4th cores. Other tests (e.g. Prime95 small FFTs) run much cooler. I've run 2hr+ linpack tests with no errors, so I don't think you need to worry about your temps yet.
However, may I suggest that you check into is your power supply, in particular the modular connections. I had the ToughPower 750W Modular before upgrading to PCP&C. I noticed that the ToughPower's modular connections had a tendency to be just a tad loose. They wouldn't dislodge but they had a little bit of play. I could jiggle them ever so slightly while they were connected. As a result, the CPU power cable (8-pin/4-pin) would cause a restart upon the slightest disturbance or sensation. I've since discovered that modular connectors also affect the efficiency, power noise levels, and overall performance of a PSU. All in all, I plan to avoid modular connectors entirely going forward. Many newer cases have excellent cable management features and even old-style cases can be cleaned up with a little planning and effort. So the modular cabling advantages don't offset the severe disadvantages. Even if your problem isn't due to the PSU, it's something I'd recommend considering replacing.
Good luck. Hope all the suggestions are able to help you nail down and resolve your issue.

Help overclocking E8500 on P7N Diamond

Hi to all!
Can you help me to overclock my system, please?
My workstation:
- E8500
- MSI P7N Diamond bios v1.2B2
- 8 GB Kingstod PC6400
- 2 SLI nvidia 8800 gts 320 mb
- ctrl DELL PERC 4E/DC
- 2 scsi hd 300 gb (not in raid)
- 5 hd sata 2 (5 x 1 Terabyte)
- Windows xp 64 sp2
with the default vcore (1.1) the system boot and load win64 at 1550 fsb and multipler by 9.5x; if I try fsb 1600 or 1604 (for the supposed fsb hole) the system does not boot. I've tried to up the vcore and the 8x multipler with the same result.
I don't think that is a cpu limit (all e8500 go to 4 ghz), but my inesperience to set up the parameters on the "cell menu", like all voltage parameters.
Thanks a lot
by!
Gian

What were your voltages? You're going to need a lot of nb volts with all that ram in there. The only thing I have is some screens from e8400 bench runs. I'll put them here so you can look. These were with beta bios 1.21. I was pushing voltages quite hard for this although I can't remember the exact numbers. That mobo doesn't have that cpu now. I'm running a q6600 in the P7N diamond now. I may have some photos of those bios settings though stored on my drives, I'll try and look tomorrow.
01
03
05
06
Aquamark
and some pi...
1m
32m

Help!! Overclock Q6600 with p7n Diamond Mobo

Hello All
Im looking for much needed help to overclock my Q6600 from 2.4 (default) to the highest stable overclock i can reach for my system. With the settings i have given below i can run 3D Mark without crashing..and run games without crashing...but after a certain period of time on a game i crash after about 20 mins of playing. Also i run Prime95 and i get Worker errors after about 10-20 mins.
Here is my reading on Cpu-Z
Here is my system:
Mobo - MSI P7N Diamond
Cooler - Arctic cooling Freezer Pro 7
Processor - Q6600 G0 @ 2.4
PSU - Hiper Power Type M 780W
Mem - Ballistix PC2-8500 2GB
Graphics card - Asus 4870 X2
Monitor - 24 Inch BenQ G2410HD
Case - Thermaltake Tsunami VA3000 Aluminum
Bios V - 1.3
Here is the settings iv already tried in my bios:
D.O.T Control - Disabled
Intel EIST - Disabled
Sli Ready Memory - Disabled
System Clock Mode: Manual
FSB Clock - 1512
DRAM - 800
Adjust Cpu ratio - 9
Cpu Voltage - 0.18750
DRAM Voltage - 2.10
NB Voltage - 1.425
SB Voltage - 1.550
Cpu GTL Referance Voltage - 0.060
FSB Terminator Voltage - 1.300
Rest = auto
Spread Spectrum - Disabled
I hope this is enough info. I Ask for anyone that replys to keep it simple for me :D as im new to this
Any help given is much appreciated
Thnx.

Quote from: Massicor on 21-June-09, 04:37:32
You know what ... this forum is crap ...you ask for help and all you get is a load of crap replys that help in no way at all thnx for wasting my time. And for the record if you guys accually knew how to overclock my cpu with my mobo then u would have just told me with no problems but instead u have wasted about 3 days of my time waiting for usuful reply and help from a decent person ! good job.
Ill figure it out myself as iv already gotten it 3.0 stable with reading only what other ppl used on there bios with short amount of trial and error.
Wow. Some people just really don't get it...
We all know how to overclock CPUs, of course. Why are you biting the hand of the arm trying to help you? I used the P7N Diamond for several months, and also provided a lot of the overclocking tips and hints, along with every beta/performance BIOS MSI released.
If you want me to do the overclocking for you, and rid you of the experience; hell, I have no problem with that. The P7N is a simple board to overclock until the NB gets too hot. Max out the FSB term, don't touch the GTL voltages, and adjust the CPU Vcore only when needed. If you cannot follow anything I said in the last sentence - go back to stock settings.
Do you even know how to stability test an overclocked system?
If you don't want to learn, you're most likely not going to get beyond 3.2 GHz.

P7N Diamond Help

Undecided
Hi everyone newboo here. Posted up originally in the Intel Duo Section but no joys, so I've posted up here instead.
I recently upgraded my P6N Diamond up to the P7N Diamond. On my P6N I was running my X6800 at a stable 3.2Ghz.
Now that I have installed the new P7N Diamond, I can't even get past the stock figures! biggthumbsdown
I haven't installed any of the DOT Software, and as soon as I try to do a manual o/c there is no change at all think
I have disabled all the Speed Steps even under the advanced mode "F4".
Can anyone help as this really was making me angry late last night wall
Many Thanks
Courtney

Hello,
I deleted your thread in the other forum section. There is no need to keep two identical threads going and the other one was not opened in the proper section anyway.
Quote
Posted up originally in the Intel Duo Section but no joys, so I've posted up here instead.
Please note that this a user-to-user forum. Everybody reads and answers here because he wants to, not becaue he has to. Please be more patient. If no one answers after 90 minutes, that is not a reason to open multiple threads to get more attention.
Please give an overview of the Cell Menu Settings your have been trying so far.

MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent

Hello every body i need very urgent help,
i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
if possible i won't use any raid configurations, but i need speed
how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
corecction about my configuration
Mainboard   MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
CPU      AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
Ram      CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
Hdd      SAMSUNG 120GB 7200RPM 8MB SATAII (2x120GB)
Graphic Card SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
Case      ENLIGHT 7247 400W

Hello !!
The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
Good Luck
Greetz MurdoK

P7N Diamond Problem or VGAs Problem, Please help!!!

I have just purchased a P7N DIAMOND Mainboard. I hope it can support me to run 2 Giga 9800 GX2. Unfortunately, there was a problem, and I am not sure whether problem comes from mainboard or the VGAs. The problem was that I pressed the power button to start up the mainboard, but my LCD did not show anything except darkness. I wonder that my mainboard is not ready to support for 2 9800 GX2 at the moment. Therefore, I took one out and left one installed on the motherboard but the problem still occurred. The list below is my specification.
OS: Windows Vista Ultimate
Mainboard: MSI P7N DIAMOND
PSU: Cooler Master Real Pro 1000W
Processor: Dual Quad Q9300
RAM: 2GH OCZ, bus 1066 (Nvidia SLI)
VGA: 2x9800 GX2 1GH (Gigabyte)
Please help me to solve the problem. Thank in advance.

Sorry for my English. Yes, there were some led lights which indicate that my mainboard was successfully started. The lights in single 9800 GX2 also turned to green. I am pretty sure that I have connected all of the power supply to the mainboard and the VGA. But the mainboard did not show the boot screen or anything else but darkness. Too bad...

P7N Diamond, need help

Similar Messages

Maybe you are looking for