P7N Diamond + XP x64 and SLI

System specs:
MSI P7N Diamond
Intel C2D E2160 @ 3GHz
4x 1GB Team Xtreem Dark PC6400 C4
2x PNY 8800GTS 512mb
Western Digital 3200YS + 5000AAKS
Cooler Master Real Power Pro M700 700W PSU
When I put the comp together I installed only one 8800GTS at first to make sure that wouldn't cause any trouble.
So what did I do,
- Got my all new shiny machine, put it all together etc. Downloaded XP x64 off my MSDNAA account and installed it.
- Found out MSI didn't put the XP x64 drivers on the CD? so I downloaded the 570i and 780i drivers off the nvidia site and Installed them.
- Everything seemed to work, Windows installed LAN etc perfectly fine.
- Downloaded the newest Nvidia GFX drivers 196.21 and installed them, found the 8800GTS fine and worked.
- Update XP x64 with the latest updates and reboot the machine.
- Install 3dmark06 and make sure everything worked as it should and it worked fine so time to add the second 8800GTS.
- Put the 8800GTS in the second blue PCI-E 16x slot and install the SLI Bridge and power on the machine again, booted into windows and notified that the system was SLI capable, then went to the control panel and wanted to enable SLI and it gave me this message.
So I decided it was time to check of the cards where running at 4x speed or higher.
Apparently they are, I also checked GPU-Z to make sure and both gave the same results, now maybe I missed an option or something? Or could this just be because they are PCI-E 2.0 and this is just new? I know the cards work in SLI they did on my old machine.
Any help will be appreciated, DarkBlaze

DarkBlaze,
I had a problem enabling SLI on my P7N also. Dont forget to reload the video drivers when you install and bridge the second card..just to make sure. Also, download the Nvida Performance Monitor version 6.10 from Nvidia's website. It has 3 parts..networking, monitor and performance, you can install all three, but I just loaded the "Performance" software and then enabled SLI from there. You can OC your vid card with it, but the mainboard screens aren't 100% active yet. Sum it up..reload the vid drivers, download and install the Nvidia Performance Monitor, open the control panel and enable SLI and apply. That should do it.
Link--> http://www.nvidia.com/object/nforce_system_tools_6.10.html
Oh yeah..I would not use the Dual Core center...nothing but problems, set values in bios and check with CPU-Z and GPU-Z, Hardware Monitor 107/etc.
Good luck
Paul

Similar Messages

MSI P7N Diamond NVIDIA nForce 780i SLI 3-way brigde

3 Way SLI Connector Model 401-MB-0023-01
Hi there recently i received a package from your company with an motherboard MSI P7N
Diamond, nForce-780i SLI, i suddenly understood that there were not any kind of
3 Way SLI Connector! Therefore i am now asking how come there are none of this inside
your package and if i want to order a part! Where do i get it from? I asked EVGA they said
that they were chipping theirs sli bridges with their motherboard and said that is also what
your company do as well! So i ask you again how come there is no 3- way sli connector in
my package! Reason for this high priority is since i have 3 GTX 280 sli and i can't run 3
-way without this 3- way sli connector!
I live in Norway and i have been struggling with finding people who might be able to solve this problem for me!
So i would appreciate you and the company too have a look at this case and let me know if
its possible to get one from you! Without any money cost! And if it is possible to get one but
it will charge then, how much? Best regards From Halvor bø
Best regards From Halvor bø

Quote from: HU16E on 22-January-09, 11:42:33
Your board should have come with three SLI cables. Two short & one long to comprise the 3-way SLI bridge cables. Installation & full description can be found on pages 2-22 & 2-23 of your owners manual.

P7N Diamond 8 hrs and counting still can't install xp

I just got a brand new system:
Intel core duo e8500
p7n Platimum board
2 x 1 gb corsair value mem at 667mhz
2 x msi 9600GT in sli
2 wd raptors 74g
3 seagate 80 gb
have been trying for 8 hours to get through an install here. I've striped the 2 WDs and am trying to install to them. I've set 3 seagates in raid 5
contantly get bsod referring to nvgts.sys
the only way I've been able to get windows installed is removing all raid settings from bios and loading to one wd raptor. after updating all the nvidia driveers and what not from the live update my system starts to crash within 5 minutes of booting and refers to the same nvgts.sys 90% of the time and other times nv4_disp.dll or no file mentioned the other 10%
the msi live update flashed my bios to current already.
am i just wasting my time here looking for this board to do what it supposed to do?
any input would be greatly appreciated

ok msi support gave me new bios to load and i managed to get the os loaded, now i'm in the same situation as i was after installing it on a single drive that one time... the machine reboots almost every 5 minutes... here are some of the errors:
? means i cannot read the character due to multi colored lines in columns
IRQ_NOT_LESS_OR_EQUAL
STOP 0x0000000? (0x000099BC,0x0000001C,0x00000000,0x80544039)
DRIVER_IRQ_NOT_LESS_OR_EQUAL
STOP 0x000000D1 (0xFFFD4A90,0x00000002,0x00000000,0xBA70D5F3) nvrd32.sys address BA70D5F3 base at BA701000 Datastamp 472236e4
BAD_POOL_CALLER
STOP 0x000000??(maybe C7) (0x00000003,0x?(B)7CF1150,0x88057740,0x88057700
STOP 0x0000008E (0xC0000005,0xBF8065CA,0xB64BEC4C,0x00000000) win32k.sys Address BF8065CA base at BF800000 datastamp 41107f7a
PAGE_FAULT_IN_NONPAGED_AREA was fast reboot could not catch remaining error
Posted: Aug 05, 2008 by Alex
Ok managed to load windows on raid after updating bios u pointed me to. I updated all drivers from msi website.
Now i am getting constant reboots every 3-5 minutes:
following are codes:
? mean i cannot read the character due to multi colored lines in columns
IRQ_NOT_LESS_OR_EQUAL
STOP 0x0000000? (0x000099BC,0x0000001C,0x00000000,0x80544039)
DRIVER_IRQ_NOT_LESS_OR_EQUAL
STOP 0x000000D1 (0xFFFD4A90,0x00000002,0x00000000,0xBA70D5F3) nvrd32.sys address BA70D5F3 base at BA701000 Datastamp 472236e4
BAD_POOL_CALLER
STOP 0x000000??(maybe C7) (0x00000003,0x?(B)7CF1150,0x88057740,0x88057700
STOP 0x0000008E (0xC0000005,0xBF8065CA,0xB64BEC4C,0x00000000) win32k.sys Address BF8065CA base at BF800000 datastamp 41107f7a
PAGE_FAULT_IN_NONPAGED_AREA was fast reboot could not catch remaining error

MSI P7N DIAMOND 780 SLI + Q9550 + CORSAIR DOMINATOR TWIN2X4096-8599C5DF + OVER

sorry my english write??
I need help to reach 3.60 Ghz?
My Configuration is:
MB MSI P7N Diamond NVIDIA nForce 780i SLI
CPU INTEL BX80569Q9550 Core 2 Quad Q9550 2.83 GHz 1333 MHz Socket 775 2 x 6MB
MEM CORSAIR DOMINATOR with DHX Technology TWIN2X4096-8500C5DF 4GB PC2-8500 (DDR2-1066) DDR2
HD 2 X SAMSUNG Spinpoint F1 HD753LJ 750GB SATA 7200 RPM 32MB em RAID0
Video Card BFG Geforce GTX 285 1GB GDDR3
cooler CPU V8 Cooler Master
Case HAF 922 Cooler Master
Power coolMax 950W
Can not pass the FSB 1520 (380) X 8.5 = 3.23 Ghz, I wonder what should I change to get the 3.60 Ghz?
my bios Configuration:
D.O.T. Control..........Disabled - dinamic Overcloking
Intel EIST..............Enabled
SLI-READY memory........Expert
System Clock Mode.......Manual
CPU Ratio Setting ......[8.5]
FSB Frequency ..........[1.520] 380 X 8.5 = 3.23 Ghz
PCIE Frequency .........[100]
DRAM Frequency .........[1066]
Advance DRAM Configuration: Manual
1st
CAS# Latency (CL) : 5
TRCD : 5
TRP : 5
TRAS : 15
TRRD : Auto
TRC : 30
TWR : Auto
TWTR : Auto
TREF : Auto
1T/2T NENORY TIMING : 2T
CPU Voltage .................[0.01250]
DRAM Voltage ................[2.10]
NB Voltage ..................[1.300]
SB Voltage .... .............[1.575]
NB Memory Reference Voltage .[1.045]
Memory Reference Voltage.....[1.075]
Memory Terminator Voltage ...[1.275]
CPU GTL Reference Voltage ...[Auto]
NB GTL Reference Voltage.....[Auto]
FSB Terminator Voltage ......[1.293]
SB Sleep Mode Voltage........[Auto]
PCIe Expander PLL Voltage ...[Auto]
CPU Spread Spectrum .........disable
thank you
Mollik

Quote from: HU16E on 01-October-09, 10:15:20
https://forum-en.msi.com/index.php?topic=118301.0
This is from awhile ago, but may have some ideas & settings that may be of use for you. The OC seemed to work better with a 1:1 ratio. Ram speed of 825 - FSB of 1650 in my case. It would not run stable at RAM speed 1066. 412.5 would net about 3.506 or so for you. Hope this helps.
thanks for the help, I think is the problem, the memory's, I will test and see how it

P7N Diamond and TWO nVidia 9800 GX2 Video Cards

Hello all, I have a simple question. I’ve searched Google and this is one of the few places I’ve found people even discussing the subject of a MSI P7N Diamond motherboard and TWO nVidia 9800 GX2 video cards running SLi.
Here is my system. MSI P7N Diamond, 6 GB OCZ Reaper Memory, Pentium E8500 processor, Asus Silent Knight cooler, two eVGA 8800 GT Superclocked Edition video cards running SLi, Tagan BZ Series 800 W power supply, four 500 GB Seagate Barracuda hard drives running RAID 0 (2 for the C drive & 2 for the D drive), Sound Blaster PCIe sound (came with MB), LG Blu-ray, DVD, CD burner & HD-DVD Reader, second LG DVD/CD burner, GL W2452T monitor and Windows Ultimate Edition 64-bit.
My question is, can I replace the two 8800 GT SC video cards with TWO 9800 GX2 video cards? I know the P7N Diamond can handle Tri-SLi, but can it handle two cards with 2 GPU’s each. I am also considering changing up my two 1 GB Reaper chips with 2 GB chips so I will have 8 GB of RAM. This should make up for the 2 GB of memory the 9800 GX2’s are using up (if, in fact the motherboard can handle the cards).
I was also wondering, if the motherboard CAN handle dual 9800 GX2’s, can my power supply handle it at 800 watts?
And for my bonus question, would I be better off considering going with two 9800 GTX+ cards rather than the GX2's? Would I honestly se a huge improvement running two GX2's as opposed to two GTX+ cards? After all, the 9800 GTX+ cards would be much cheaper!
Thanks in advance for any help!!!
GH

Thanks for all the help BossKiller!!! You’ve been a HUGE help!
RemusM, I have two answers for you…
From the sensible side that should be thinking this through, no. You are absolutely 100% correct, I probably don’t need to run two 9800 GX2 cards. I can play the games I’m currently playing quite well on two 8800 GT OC cards. I should save my money.
And, from the geek side I say heck yes! This will ensure I can run pretty much everything out there and anything made in the near and not so distant future with all settings maxed out!
That said, I wish I would listen to RemusM and my sensible side… but alas it’s a losing battle. Plus, I may be getting the two 9800 GX2’s for $300 ($150 each) . So it’s not that bad. If I have to pay full price for them, the geek side may lose out anyhow.
GH
Oh and by the way RemusM, I LOVE the sig block!! That’s an old Timex isn’t it? It’s not the Sinclair 1000 is it?

Does P7N Diamond (MS-7510) support Intel's Virtualization?

Hi,
I plan on installing Windows 7 soon, and would like to use the Windows XP mode / new Virtual PC.
I've run the Intel Processor ID utility, which says that my Q6600 supports Virtualization, however I cannot find any information as to whether my P7N Diamond supports it or not (although I can't find the option in the BIOS).
Does anyone know if the P7N Diamond supports Virtualization, and if so, which version of the BIOS I will need?
Thanks,
Adam

Hi,
I'm a french User and I would like to use XenServer with my P7N SLI Platinium + E8400.
The Install works fine (so virtualization should be ok) but pc reboot at first boot.
The safemode no work more with "Kernel Panic not syncing : attempted to skill init".
My bios is 7380v13 (v1.3 111908) and I would try beta bios 1.4 to resolve my problem but I don't know where to find it.
Could I update my bios with P7N SLI which is 7380v22 ?
http://global.msi.eu/index.php?func=searchresult&keywords=ms-7380&table=download
Thanks a lot for your response.

MSI P7N Diamond can't SLI and Triple SLI in Vista x64?

Any brothers here can tell me what the issue with it?
Currently on Vista Ultimate x64 and using the nvidia 169.25_forceware_winvista_64bit_english _whql driver.
Can't SLI and don't even say about triple SLI.
plug in 3 x 8800gtx all can't work.

Quote from: Fadamor on 29-April-08, 03:46:22
Also check to make sure your power supply is certified to support 3-way SLI with 8800 GTX cards. I have a CoolerMaster Real Power Pro 1000 and it is not certified for 3-way with 8800 GTX cards. It IS certified for 3-Way with the 9800 GTX cards. The 8800 series apparently draws a bit more power.
Check the SLI-certified power supplies here: http://www.slizone.com/object/slizone_build_psu.html
i thou the PSU listed at Slizone is just a guideline? Oh men. Can't imagine i spend so much on the enermax psu and in the end i doesn't have enough juice for 3 cards.

Users running the P7N Diamond and QX9650 please weigh in. I need help...

OK, I'll start from the beginning. I had an EVGA 780i mobo, which ran a Q6600 at 3ghz quite easily. Well, I decided that I had money to burn so I ordered a QX9650. It would not work on the EVGA, the cpu voltage and cpu fsb voltage would not adjust no matter what I tried. So, I popped the cpu into my kids rig, which has a DFI X38 mb and the cpu worked perfectly, voltages adjusted, multiplier adjusted, etc. During the RMA process to EVGA, I got an MSI P7N Diamond to run SLI with. Stuck the cpu in it and away I went into Vista 64, all happy. I had to bump the memory voltage up to 1.95 volts, but that was it. I then decided to raise the multi from 9 to 10. I set it, warm booted and tested it in Vista. 100% stable. 2 days later, I attempted to turn my computer on. No post. I had to power off/on very quickly to get it to post, at which point I got an error message that the cpu vid had failed or there was a mismatch with the cpu to fsb ratio, hit F1 to enter setup or F2 to load defaults. I e-mailed MSI and received beta P05 and it was just downhill from there. I couldn't cold boot at all, stock settings, OC settings, voltages adjusted, it didn't matter. So back to the shipping bios. I got a new beta this morning, dated 2/18, and it was the exact same.
Issues with both beta's:
1. Cannot cold boot.
2. Logitech G15 acts erratically prior to entering Vista.
Things I have tried:
1. Raising Vcore.
2. Raising NB/SB voltages.
2. Raising FSB Terminator voltage.
Nothing helps. MSI simply told me not to OC and run at stock and that there was no problem. Is there anyone else out there that has this cpu and mb? If so, can you post your experience with it and let me know if there is something I am doing wrong or could try?

Below is the actual transcript that I had with MSI on this issue. As far as they are concerned, I don't need to change the multiplier on my QX9650. (Start reading from the bottom up for the actual order of the conversation)
Quote
MSI Tech. 02/19/2008 Then, there is no problem with the mb.
End User 02/19/2008 There doesn't seem to be any issues with usb while on using the shipping bios, I only see it when I flash to the beta bios'.
MSI Tech. 02/19/2008 If the stock bios also has the usb issue then try: Have all USB device connected to the rear USB ports that are build onto the mb and retest with all USB header on the mb be removed from any front USB connections or adapter connections and retest. If all steps have been tried and problem still persists then please kindly refer to our website for manufacturer warranty RMA info/request: http://www.msicomputer.com/support/CustomerS.asp
End User 02/19/2008 No change. I cannot even cold-boot at stock settings with this. Also, it still kills my Logitech G15 keyboard randomly. i have to unplug it and plug it back in to get it to power up, and that is only after I boot into Vista. Back on the shipping bios for now at stock settings. Please, if you would, keep me informed of changes or progress. Thanks.
End User 02/19/2008 Thanks! I will poat back if it helps or not.
MSI Tech. 02/19/2008 Beta bios v111 attached to this form.
End User 02/19/2008 Is there any other beta bios' that you have that could help? The P05 didn't work out so well, maybe you have a newer one that I could try? It seems odd that it is only on a cold boot that I have issues and not on warm boots. I am willing to try anything you got at this point!
MSI Tech. 02/19/2008 Sorry, but MSI did not see any issue with using QX9650 processor.
End User 02/19/2008 So are you saying that as far as MSI is concerned, there is no issue with the QX9650 and the P7N Diamond motherboard? I am not asking you for advice on hot to OC it, I am asking you if you know of the issue and are looking into it to try and correct it. If you do not think there is an issue and are not going to investigate it, then I will be very disappointed.
MSI Tech. 02/19/2008 If there is no problem with standard bios and no OC then you can refer to other website/forum for OC suggestions or settings. MSI does not provide these setting/suggestions since it can cause damage to the components.
End User 02/19/2008 Also, I am unable to use the Dual Core center, as I am running Vista 64. It does not load properly when using this OS.
End User 02/19/2008 As of now, it boots and runs fine with the shipping bios and no OC. But, why would I have paid such a high premium to get a QX9650, that has an unlocked multiplier, if I cannot use it? Is this strictly an issue with the newer 45nm Intel processors or is it something else? If not being able to use my cpu's unlocked multiplier is "ok", then I may return the board for a refund.
MSI Tech. 02/18/2008 What is the problem when system uses the standard bios and not OC?
End User 02/18/2008 Is there a fix on the way or is it just a problem with my hardware? I have it back on the shipping bios and it is at least cold-booting now, as well as my G15 is working. I upped the NB voltage a hair above auto, maybe this has somethinng to do with it?
MSI Tech. 02/18/2008 Use the standard bios and use software to OC: http://global.msi.com.tw/index.php?func=downloaddetail&type=utility&maincat_no=1&prod_no=1372
End User 02/18/2008 I was way too quick to say everything is OK. I now have cold boot issues aplenty. 9 times out of 10 it will not post on a cold boot, but will warm boot. I have to power off then on real quickly to get it to post at stock speeds. Also, my Logitech G15 started to act erratic with the P05 beta. I am back on the shipping bios until I hear from you.
End User 02/18/2008 Thanks you for the beta. I flashed to it, cleared the cmos and set everything back up and now I have a new problem. Even though I have disabled the EIST function in the bios, it still seems to be on. i am using cpu-z version 1.44.1 to monitor the multiplier and it randomly shifts between whatever I set it to and 6. It is even doing it when the system is loaded, ie playing games. Please, help!
MSI Tech. 02/18/2008 Beta bios attached to this form.
End User 02/18/2008 Everything is stable 100%. But, on my QX9650, I set the multiplier to 10X to run at 10x333=3.33ghz. It was fine until this morning. I turned the computer on and it would not post. I powered down and repowered it up and it siad the cpu vid had failed or errored, hit F1 to enter setup or F2 to load defaults. I entered setup and the multiplier was set back to 9x. I left it there and am ok now. Is there a beta bios that helps out operations with the newest Intel 45nm processors, such as the QX9650?
I have absolutely no issues in Vista itself, it is 100% stable. It is only on a cold boot that I have serious issues. And yes, I got 3 in a row, went to work for a few hours, then came home and bam! No cold boot. Also, I don't know how comfortable I am raising the vcore that much, as 1.21-1.25 is the normal operating range. 1.3625 is aweful high. Now, with the 65nm quads, that is more in the range of what would be needed, but no way should it be necessary to pushh this QX9650 to a meeger 3.33ghz. As far as temps go, I have the processor watercooled, so no worries there. I am away from home now until Saturday morning, so I can't test anything until the weekend.
Thanks alot for the responses!
Shawn

New Need Sink needed for MSI P7N Diamond nForce 780i SLi (Socket 775)

Hi Guys,
I've been having a problem with my machine where it will be working away as and then suddenly restart. I haven't been able to pin point the problem as it can happen regardless of applications or load thats on the machine. I've also run a couple of app's to check the RAM and its fine. The only thing I've been noticing is that the 4 cores of my Q6600 seem to be running a bit hot. On average on Idle there running between 45-55oc. Does this seem normal? I'm thinking that the cpu might be over heating when I'm running apps. I've seen one of the cores up around 68oc when under a bit of load. I'm using the stock heat sink at the moment and would like to cool things down it see if that helps. Can anyone recommend something suitable for my motherbroad.
Thanks
Garret

Quote from: Garret C on 15-October-09, 17:22:47
Intel Core 2 Quad Pro Q6600 "Energy Efficient SLACR 95W Edition" 2.40GHz (1066FSB)
MSI P7N Diamond nForce 780i SLi (Socket 775) PCI-Express DDR2 Motherboard with Free Creative X-FI Card
Thermaltake ToughPower 750W Modular Power Supply
My Q6600 (also G0/SLACR but don't know what you mean by "Pro") is OC'd to 3.4GHz and has had no problems running stable. Highest temps during OCCT/Linpack and LinX/Linpack peak at 80C 1st/2nd cores - 76 C 3rd/4th cores. Other tests (e.g. Prime95 small FFTs) run much cooler. I've run 2hr+ linpack tests with no errors, so I don't think you need to worry about your temps yet.
However, may I suggest that you check into is your power supply, in particular the modular connections. I had the ToughPower 750W Modular before upgrading to PCP&C. I noticed that the ToughPower's modular connections had a tendency to be just a tad loose. They wouldn't dislodge but they had a little bit of play. I could jiggle them ever so slightly while they were connected. As a result, the CPU power cable (8-pin/4-pin) would cause a restart upon the slightest disturbance or sensation. I've since discovered that modular connectors also affect the efficiency, power noise levels, and overall performance of a PSU. All in all, I plan to avoid modular connectors entirely going forward. Many newer cases have excellent cable management features and even old-style cases can be cleaned up with a little planning and effort. So the modular cabling advantages don't offset the severe disadvantages. Even if your problem isn't due to the PSU, it's something I'd recommend considering replacing.
Good luck. Hope all the suggestions are able to help you nail down and resolve your issue.

P7N Diamond and C2D E8400

I'm trying to find out what is the best and most stable BOIS to use with a E8400 other then MSI recommend 1.2 BIOS. Because when my system POST it stops a NVRAM testing.... and just hangs there. I would like to leave my BIOS setting to default and not have to manually changes setting unless I am overclocking my system.
My System Specs:
Windows Vista Ultimate
Intel C2D E8400 3.0GHz. Stepping E0
P7N Diamond (BIOS Ver. 1.2)
XFX GeForce 8800GT 512MB x2 (SLI)
Patriot Extreme Performance DDR2 2GB (2 x 1GB) PC2-6400 Low Latency DIMM Kit x2 (4GB ram total 4-4-4-12 2T)
Seagate 500GB SATA Hard Drive x2
LG DVD-RW SATA x2
Enermax Liberty DXX 620 watt Power Supply
Thank you for your help and advice.

Can you please explain what in your own words, what the so called "NVRAM Issue" actually is in your case? From what you said above, it is rather hard to understand what your actual problem is...

P7N Diamond and multiple RAID

I'm looking to buy a new system and MSI's P7N Diamond looks like a good choice to me.
The specs says that the onboard nForce 570i SLI supports 6 SATA II ports in RAID 0, 1, 0+1, 5
Is there anyone who knows if its possible to have multiple RAIDs configed on that controller?
I'm thinking 2x WD Raptor 36GB in one RAID 0 for the system and 2x WD 1TB in one RAID 0 for data.
Is it possible to have both RAID-disks and non RAID-disks (single disks) on the controller on the samr time?
Many questions...
Most gratefull for any help!
Best Regards!
/Pär

"Is there anyone who knows if its possible to have multiple RAIDs configed on that controller?"
Yes should be fine, just create 2 independent arrays.
"Is it possible to have both RAID-disks and non RAID-disks (single disks) on the controller on the samr time?"
If you want to use the same Sata ports for single disk(s), you will need to disable RAID from BIOS for those Sata channels where are connected your HDD's which will be used as single drive.
Example you may have:
SATA1 WD Raptor 36GB |
SATA2 WD Raptor 36GB | both 2x WD Raptor 36GB assigned in RAID0 (or 1) ---> Array 1
SATA3 WD 1TB |
SATA4 WD 1TB | both 2xWD 1TB assigned in RAID0 (or 1) ---> Array 2
SATA5 Some other SATA HDD as single drive (RAID for SATA5 should be disabled in BIOS)
SATA6 Some other SATA HDD as single drive (RAID for SATA6 should be disabled in BIOS)

P7N Diamond & P7N SLI Platinum & P7N SLI-FI

The main purpose of those Betas ===> Solved the Video Corruption and fix 9.5 CPU Ratio Multiplier for E8500.
P7N Diamond ==> A7510NMS.121 {06/06/2008} (V1.2B1) Attachment: P7N Diamond v121.rar
P7N SLI Platinum ==> A7380NMS.124 {06/06/2008} (V1.2B4) Attachment: P7N SLI Platinum v124.rar
P7N SLI-FI ==> A7380NMS.211 {06/06/2008} (V2.1B1) Attachment: P7N SLI-FI v211.rar
*** Flashing either of these BIOS' are at your own risk. Do not complain if you end up with a paper weight! ***
Flashing the safe way:
Use Method 1 or Method 2, both will do the same job.
Use it at own risk.
Before you flash!!:
Make and ensure PC is stable before proceed, remove any OC if you have.
Flash it via DOS mode by booting from USB key, CD/DVD.

Quote
Noobish question - is clearing the CMOS absolutely necessary after a BIOS update?
Yes, it is recommended to clear CMOS with main A/C power cable removed from PSU. There might be small changes in data structeres between BIOS Versions. Not clearing CMOS and resetting BIOS settings after flashing can have unexpected side effects.
Quote
I'm not really comfortable poking around inside my case apart from swapping a graphics card or hooking up power cables.
You don't need to "poke around" anywhere. You simple need to unplug the main A/C power cable from your PSU, which is outside the case, hit the power-on button to drain capacitors and then press the little button on the back panel of your board for a couple of seconds. That means you don't even have to open your case to clear CMOS.
Quote
So again, would NOT clearing the CMOS jumper thingy prevent successful update/boot?
If you restart your system after clearing CMOS, the BIOS will display an error message and prompt you to reset your BIOS settings, that's it. Nothing to be afraid of. The only risk involved is the BIOS Update itself, not the CMOS Clear.

P7N Diamond & 9600 GT SLI

Hi,
Small question.. Does the P7N Diamond support two 9600 GT (asus) in SLI mode?
Probably does, but could I get a confirmation on this, because in the manual of the P7N, dual cards in SLI are connected with 2 SLI bridges..and the 9600 GT only has room for one bridge....
Thanks in advance!

Thanks for the quick reply!

Interesting SLi w/ P7N Diamond motherboard

Found something odd with the P7N Diamond. I have 2 9800 GTX cards, installed and working fine with one bridge between the two cards. MSI's manual for the P7N says to use 2 bridges between the cards...so I installed both bridges. Once both bridges are in I get graphics distortions, flickers, etc. Remove the 2nd SLi bridge and the system works fine. Anyone know of any reason I can't just use a single bridge for SLi? I've checked that SLi is enbaled (visual indicator) and everything seems fine.

The second bridge slot is for when you are using three-way SLI only. If you label things as:
Cards 1, 2, & 3
and on the cards: Slots A, B
Your bridges should connect:
1B to 2B
2A to 3A
(and the long one) 1A to 3B
This way every card gets to talk to each other card directly without having to go through the third. There's no need to use the second slot when only two-way SLI is used. Doing so is like trying to transmit on a radio when the frequency is already in use.

Another CS4 and Vista x64 GPU SLi Support Question

After reading some of the forums I could not really find a clear answer on the following:
I am running Vista x64 Ultimate on a QX6850 system with 8GB of RAM. I also have 2x XFX8800GT graphics cards running in SLi with the latest Nvidia drivers (181.20). Dxdiag testing provides no errors.
The GPU support features in CS4 x64 (and x32) is greyed out with the text wording of no support in Photoshop standard. Based on some of the threads posted here, I tried enabling or disabling some settings in the Nvidia control panel, but the only one that seem to enable the GPU support is to deactivate SLi completely (which sort of defeats the purpose in 3D graphics).
Does CS4 support an SLi setup? If not, will there be any difference in performance with SLi disabled and using the CS4 GPU support vs the other way around?
Thank you for your assistance.

Negitive. It is written on the CS4 requirements section. Only 1 GPU.

P7N Diamond + XP x64 and SLI

Similar Messages

Maybe you are looking for