P7n Dimaond Vista 64 bit lock-ups

Hi, I'm experiencing random hard lock ups of my newly built Vista 64bit PC
I've reinstalled the OS 3 times, i have all the latest drivers.
I've ran memtest several times and the vista memory diag tool with no errors, and on individual sticks. i have stress tested my CPU and GPU with no errors many times.
it sometimes freezes 5 mins after booting up, when surfing the web, when on screen-save,r when typing in word and when playing games, sometimes it will be fine for hours then suddenly just freeze up.
I see nothing in the Event Viewer.
My setup:
MSI p7n Diamond with latest official BIOS version fomr the MSI site.
Intel e8400 @ 3.00GHz (stock)
XFX 9800 GTX Black Edition
4x1GB Corsair DDR2 XMS2 Ram
Antec Quattro 1000W SLI PSU
Trust 5.1 Sound Card.
Hitatchi SATA HDD
Pioneer SATA DVD/RW
Zalman 9700NT CPU cooler.
I updated the BIOS using MSI live update, but it was freezing before the update aswell.
I cant find any pattern to the freez-ups it seems entirely random.
I have manually changed the ram voltage in BIOS to 2.1V (manufacturers reccomendation) and changed timings.
However even at stock values it still freezes
Thanks for reading

Quote from: cliffo88 on 23-September-08, 01:56:38
I updated the BIOS using MSI live update, but it was freezing before the update aswell.
I cant find any pattern to the freez-ups it seems entirely random.
YIKES
Whatever you do, never attempt to update the BIOS of a system that is freezing randomly, especially via MSI Live Update. In fact, you'd be well advised to avoid MSI Live Update entirely.
The most commonly suggested method for flashing BIOS is via USB disk method and only after booting to DOS, not Windows. Even in these conditions, if there are hardware issues that are still preventing the system from running stable (e.g. failing PSU, excessive heat, etc.), you should not attempt to flash the BIOS.
Attempting a BIOS flash under any of these conditions is risking permanent and irreparable damage to your motherboard.
As for your Vista 64 lockups, I personally am not convinced that Vista drivers are completely reliable yet, much less Vista 64. Another possibility is that your PSU is failing.

Similar Messages

P7N SLI Platinum lock-ups

My specs:
Q6600 stock speed
Kingston HyperX pc8500 2x 1gb. I manually set it to it's rated timings, voltage and frequency. I have also tried different ram, from Exceleram and it makes no difference.
2x Asus EN8800GT 512mb cards (tried using just one card too, tried switching to a different 8800gt card from sparkle too, no change.)
HDD: Have tried several hard drives, pata and sata from probably all the manufacturers, i dont see why i need to post their specs since they problem persists nomatter what hdd i use.
Windows XP SP3 proffessional.
nothing else is in the system, i removed every piece of hardware, like sound card, optical drive, etc. to isolate the problem.
Power supply: Thermaltake ToughPower 700W
BIOS Version: the beta bios posted on this forum that supposedly fixes the video corruption bug (it doesnt). Also tried 1.0 and 1.1
The problem: random lock-ups. Sometimes it doesnt happen for 2 days and then BAM! Its happening every 15 minutes now. It might stop happening for another 12 hours and start locking up again. It only ever happens when im working in 2d applications like browsing, using messenger or IRC, watching videos on youtube or in a media player, or just moving files around or anything mundane like that. it once happened when i wasnt touching the keyboard or mouse at all, i was waiting for some files to finish copying over LAN. I also get the famous video corruption but it is EXTREMELY rare, like once a month. It crashed the last time the video corruption appeared, once i tried to click the player to pause, the system crashed. The system will never lock up while playing games, i play medieval II total war for days without any problems. The store i bought the p7n from tested it for me and they said it worked fine, but they used an ATI card so that may be a clue? Then again, they are really incompetent and didnt run the right set of tests, and ignored what i had told them about the nature of the crashes.
Detailed description of the events: System freezes, first everything except the mouse is frozen but if i try to click with the mouse, it freezes too and the screen flashes a black screen every few seconds. it never recovers and i have to shut it down by holding the power button for several seconds. some of the 2d graphics in windows get corrupted with artifacts, and the mouse does get heavily corrupted usually.
What i've tried:
I thought the mobo was defective but it isnt, i got a new mobo from the store and it has the same problem.
Tried working my way through every combination of memory timings, frequencies and voltages that i thought might make a difference but it has no difference on the crashes.
All the hardware works perfectly in my Asus P5N32-E SLI motherboard (i bought this msi mobo for some different reasons that i wont go into here), so theres nothing wrong with any of my components.
The only item i've not had the oportunity to switch with a different one is the power supply, but again, it works perfectly with all other motherboards that i've tried.
Is this possibly related to the video corruption bug? Does anyone have any idea when the next bios release is due? Please help, it sucks to buy an expensive motherboard that just doesnt work. i'll have to buy a 3rd sli mobo if I cant fix this.
PS: Is it not possible to regulate fan speed for sysfans connected to the mobo's fan connectors? My asus mobo had great fan speed controls in the bios, if this one doesnt have any such options, i call that ridiculous.

I appreciate your effort, guys. I've tried running the memory in 800mhz and on auto timings and on some other timings too (i was kinda desperate and i messed around with the memory configuration for days with no success), and tried auto volt (it gets set to 1.8 which the memory is rated for at 800mhz) and tried 1.9 and 2.0 and 2.1 and 2.2 and i've tried completely different memory modules too that i borrowed, and tried running in single channel with both modules and running just 1 module. none of these experiments had any effect on the crashes :\. But don't you think this could be related to the video corruption bug? I always thought it was, since this problem doesnt seem to happen for me when there is an ATI card in the system. Not that my 8800gt cards are defective in any way either, they are rock solid on my other motherboard.
I have one more theory, some weird inexplicable compatibility problem between this particular PSU and this particular mobo. Think it's a possibility? The psu is the only thing i have not switched out for another component, every other component i have switched for another one that was known to be working fine.
also, there is the extremely distant possibility that the issue is caused by an issue that the mobo might have with BOTH the kingston and the excelleram modules that i tried, however this seems far-fetched. but this problem is a fact and SOMETHING is causing it. i've eliminated almost everything i can think of.

Bit Locker Drive Encryption of Windows Vista

Have just downloaded the Bios Upgrade version 2.2 (QG40 BIOS_W220.exe), but I inadvertently omitted to turn the 'Bit Locker Drive Encryption of Windows Vista' off first, as Toshiba had advised.
Is there any corrections I can make to rectify this omission and ensure the G40 and the software operate correctly?

Thanks for your prompt reply Jeka-Nn. But I have several further questions before going too far with the suggestions as I am not familiar with software modifications.
1. What am I actually trying to do overall by downloading and using the suggested application.? Can you give me some overall picture of what I am trying to do?
2. Does this fix the problem without me having to make choices--is it self sufficient/self-installing?
3. Will it return the system to its correct operational settings before I downloaded the Bios upgrade?
4. I have downloaded the application suggested, but when I try to open the file it sends up a message that reads:
Error; this installer does not contain any compressed files. To create a self extracting installation package (with embedded files) run:
"TrueCrypt Setup.exe" /p
When I press OK, it simply reverts to the downloaded list which has the TrueCrypt v7.0 included, but nothing else happens.
What do I need to do to fully install the application?
5. Are there any other steps /inclusions that I need to make to fully correct my 'stupidity'?
Sorry about all these questions but you can see I am a raw beginner at this work.
With thanks, rons

BSOD / Lock-ups with new Q9550 in P965 Platinum

MSI P965 Platinum Mobo
E6700 CPU, recently upgraded to Q9550
Zalman Cu heat sink + fan.
4GB Corsair 6400 C4 (4-4-4-12 800 MHz)
MSI 8800 GTX graphics
Auzentech Meridian sound
2 x 36GB Raptors RAID 0 (System)
2 x 250 GB Western Digital Caviar WD2500KS RAID 0 (Data)
Corsair HX620W PSU
All drives attached to the ICH8R Intel RAID controller.
BIOS: 1.8 (latest)
Vista Ultimate 32 bit SP1 + latest patches
Intel Matrix Storage Manager v8.6
Hi all,
I have run with the above hardware specification since Jan 2007 without experiencing any hardware problems at all. Two weeks ago I upgraded the CPU from an E6700 dual-core to a Q9550 quad. I was a little concerned about doing this, because the P965 supports a max FSB of 1066 and the Q9550 is rated at 1333. In any case, I Googled around and found that some flavours of the Q9550 had been tested on my mobo (http://www.cpu-upgrade.com/mb-MSI/P965_Platinum_(MS-238).html) and also MSI list the Q9550 stepping C1 as being compatible so I took the leap.
Early indications were good - Vista detected the new chip and I rebooted when prompted. However, in the space of two weeks I have experienced around one or two BSODs per day STOP 101 or 124 codes. Hmm!
I have switched back to my trusty E6700 chip and the system is then as solid as a rock. I see 3 possibilities here:
1.The Mobo website (MSI P965) lists the Q9550 stepping type C1 as being compatible. There is no mention of E0 or C0 which seem to be the other two variants. I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping. Is there any way to tell which on I have - I tried with CPU-Z but didn't spot the stepping type? In any case, could this be the problem or am I off-base?
2. It's possible I have a faulty chip. How likely is this do you think? I could ask for a swap with Novatech but could be back in the same boat, and they will reject the return unless it is 'proven faulty'.
3. I need to mod the clocking on my rig to support the Q9550. If so, can anyone advise on what I should do?
I doubt the problem is caused by an OS factor as I ran some tested in an XP pre-boot environmet and still got the lock-ups.
What should I do? i don't really want to ebay the chip at say a £50 loss if i can help it.
Many thanks in advance.

Quote
I have no idea which stepping type mine is as the product numbers for the Q9550 chips are all the same (EU80569PJ073N or BX80569Q9550) regardless of whether it is a C0, C1 or E0 stepping.
No, the OEM Order Code is different, and the sSpec Number also.
Have a look at these links
Q9550=SLAWQ=C1--> http://processorfinder.intel.com/details.aspx?sSpec=SLAWQ
Q9550=SLB8V=E0 --> http://processorfinder.intel.com/details.aspx?sSpec=SLB8V

Random Lock ups

I'm using K9N2-SLI plat with Bios 3.5, AMD64 X2 6400+ Black Ed., 4GB ram (2x2GB Cas 4-4-4-12 T2 matched set), XFX 8800GTS(92) 512, Corsair TX650, Artic Cooler Freezer64 CPU H/S running Vista64 Home Premium Sp2. I'm having random lock-ups during 3D games. Sometimes it locks up after 30 mins in game or sometimes it locks up after days of playing, I can't get it to reproduce the lock up at will. I have read alot of post about this motherboard and it seems it comes down to power supply. I had a New Apevia Beast 2 rail system but after reading the posts I returned it for new Corsair TX650. At full load CPU cores never go above 47c and Idles around 30-31. Ran mem test over night with no errors. Did notice in Mem Test it stated Ram was set at Cas 4-5-5-18 T2. I went to BIOS and set the mem for Volt 2.0 Cas 4-4-4-12 T2. This did reduce the lock-ups to the point I thought I had it fixed. Than today I locked up twice. When it locks up computer becomes unresponsive last sound repeats for few seconds and the only way to resume is to press restart button. I have tried with Cool n'quite on and off, DOT is never been on. Computer runs fine in 2d operations. It's only when I go into 3d games. Video Card has been tested in other machine and is working fine. My game sometime requires me to stay logged in over night to Sell goods. Every morning this last week computer has froze sometime during the night. Crysis plays fine for hours, It seems it happens in not so demanding games, Aion, Knight Online and Wow. All power plugs are plugged, fresh install of Vista, Newest drivers from web site, Bios update via the Forum USB key app. Would really like a reliable computer. What am I missing? Let me know if you need any other info.

OK I ran single stick and it locked up quicker. I went to BIOS used optimized defaults with only changing the volts to 2.0. and it locked up again. It's lockups seem longer if I change mem setting to 4-4-4-12 T2. I used CPU Z and noticed few things.
The memory report from CPU-Z:
DIMM #            1
   SMBus address      0x50
   Memory type      DDR2
   Module format      Regular UDIMM
   Manufacturer (ID)   A-Data Technology (7F7F7F7FCB000000)
   Size         2048 MBytes
   Max bandwidth      PC2-6400 (400 MHz)
   Part number      EXTREME DDR2 800+
   Number of banks      2
   Data width      64 bits
   Correction      None
   Nominal Voltage      1.80 Volts
   EPP         yes (2 profiles)
   XMP         no
JEDEC timings table      CL-tRCD-tRP-tRAS-tRC @ frequency
   JEDEC #1      3.0-3-3-9-12 @ 200 MHz
   JEDEC #2      4.0-4-4-12-16 @ 266 MHz
   JEDEC #3      5.0-5-5-18-23 @ 400 MHz
EPP timings table      CL-tRCD-tRP-tRAS-tRC-CR @ frequency (voltage)
   EPP profile #1 (full)   4.0-4-4-12-22-2T @ 400 MHz (2.000 Volts)
   EPP profile #2 (full)   4.0-4-4-11-20-2T @ 400 MHz (2.000 Volts)
since I was using EPP profile 1 I noticed that motherboard is running my memory at 4-4-4-12-24(EPP profile shows should be 22)-2T. Should I change to match memory? or should I try JEDEC #3 @ 400MHZ
Next thing I noticed was The chipset is stated as 740a not the 750a
Chipset
Northbridge      NVIDIA nForce 740a SLI rev. A2
Southbridge      NVIDIA nForce 740a SLI MCP rev. A2
Graphic Interface      PCI-Express
PCI-E Link Width      x16
PCI-E Max Link Width   x16
Memory Type      DDR2
Memory Size      4096 MBytes
Channels         Dual
Memory Frequency        400.0 MHz (CPU/7)
CAS# latency (CL)        4.0
RAS# to CAS# delay (tRCD)   4
RAS# Precharge (tRP) 4
Cycle Time (tRAS)        12
Bank Cycle Time (tRC) 24
Command Rate (CR)        2T
I've tried loser setting 5-5-5-18 and still locks up.

Issues (Lock ups) with iTunes 10.6.3

Hi everyone!
I've recently updated my windows 64-bit version of iTunes to 10.6.3 and ever since I'm getting slow response times (ok, that actually occured in the preceding version, too) and lock ups by not doinig anything special other than flipping through my music and deleting or adding files. I'm not even talking about synchronization with other devices here, but simple managing tasks.
Has anybody the same issues or ist it just me. Mr. Google could not help me out on this one
I'm pretty dissappointed and haven't had any othe bad experience with Apple yet. But this is unbearable...

You may be seeing something like what is described in this Apple article -> Apple software on Windows: May see performance issues and blank iTunes Store
If it's what you're seeing, you can try resetting Winsock as a temporary fix or folllow along with the article.
1. To do so, please do the following in an administrator user:
Windows Vista and Windows 7: Right click All Programs and choose Accessories > Command Prompt. Choose to open as an administrator.
Windows XP: Click Start > Run and type in cmd.
2. Enter the following command:
netsh winsock reset
3. Restart the computer and test the issue.
Note: If the issue returns, third-party software may be reinserting the LSP.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

Please help! Major problems (performance and lock-ups) with brand new W520 with Intel 520 SSD

My company primarily uses HP machines but I've been a long time IBM (now Lenovo) fan so I recently had IT purchase me a new Lenovo W520 (product ID 42763LU).
Once the machine arrived I had them do the following:
Remove the 500GB HDD and replace it with an Intel 520 series 240GB SSD
Remove the optical drive and install the 500GB hard drive that came with the machine in the optical bay (with the bay adapter of course)
Format both drives and put a preconfigured windows 7 64-bit image on the SSD
A general summary of the system is the following:
Intel i7-2860QM CPU
8GB RAM
NVIDIA Quadro 1000M
Intel 520 240GB SSD (primary HDD) [SSDSC2CW240A3]
Hitachi 500GB HDD (optical bay) [HTS727550A9E365]
Intel Advanced-N 6205 network adapter
TouchChip Fingerprint Scanner
The machine was a few days delayed getting to me due to "hard drive driver issues" (that's what I was told). When I received the machine I immediately noticed that it was much slower than I expected (I have a custom built i5 HTPC at home running windows 7 on a Crucial SATA III SSD that I was comparing it to) and I was experiencing frequent hangs (ranging from 30 seconds to multiple minutes), super long boot times, general “slowness” at times, and occasional lock-ups. Since our "baseline" laptop here at work is the "equivalent" HP workstation my IT guys have been less than helpful in helping me to solve this issue. Being reasonably computer savvy I decided to try to try to fix the issue myself. I performed the following “troubleshooting” steps:
1. One of the first issues (errors) I noticed in the event viewer was errors related to the optical drive. Clearly the image they installed on the machine was not from a machine with the same hardware configuration. So, I decided to just wipe the machine and perform a fresh install of windows 7 from the disks (well, USB). After spending multiple days installing windows, performing updates, making sure all the drivers were current, and installing only the critical software I need, I was disappointed to realize that although I fixed the optical drive errors the machine was still slow, was hanging, and locking up regularly.
2. Removed the cover on the machine and removed/reinstalled the drive to verify it was secure.Everything looked good.
3. Verified the latest firmware is installed on all my Intel hardware. Everything seemed up to date.
4. I performed a number of troubleshooting steps like booting the machine with/without the battery, with/without the HDD in the optical bay, installed/removed from the docking station, etc. and none of these things helped (also a note – occasionally when running on the battery I was hearing a strange “buzz” or “static” sound coming from the area around the SSD).
5. Next I did some internet research and learned quite a few things. First, it sounds like others have had similar problems with this machine and/or SSD combo and there were quite a few options suggested to “fix” these issues. The general consensus for troubleshooting steps were:
5.1. Download and install the latest Intel chipset drivers and AHCI controller drivers (overwriting whatever windows installs during updates).This didn’t fix anything.
5.2. Turn off PCI express link state power management in the power manager. This didn’t fix anything.
5.3. Disable superfetch, prefetch, indexing, defragmentation, page file, system restore, and hibernate. A few of these were already disabled by windows so in those cases I just verified they were disabled in the services and application editor. These things may have slightly increased performance but did not fix the major hang/lockup issues I was having.
5.4. I followed online steps to edit the registry to disable the PCI link power management by adding ports, adding the required variables, and setting them all to 0. This did seem to have fixed the hangs and/or lock-ups but the machine is still much slower than I would expect (boot times are still pretty slow and it does “stutter” when I’m doing more than one thing at a time. Also a note here – I have the Intel SSD toolbox installed and I noticed that it was giving me a warning for DIPM not being optimized. I made the mistake of clicking “Tune!” and then started having the hang/lock-up issues again. I went back into the registry and sure enough the PCI link power management variables for ports 0 and 1 were set back to 1. I set them back to 0 and the hangs have gone away. I will not be “tuning” the DIPM through the Intel SSD toolbox again…
6. I also fixed a couple of other minor errors I was seeing in the event viewer by disabling benign services and/or making slight timeout modifications (I researched each issue on the internet to verify they were benign before I implemented any changes). These fixes didn't seem to do anything other than make some of the errors/warnings go away. So, the list of errors/warnings has become much smaller but I’m still getting the following (maybe an issue, maybe not?):
Event ID 37 for every processor saying that they are in a reduced performance state for xx seconds since the last report
Event ID 10002 - WLAN Extensibility Module has stopped
Event ID 4001 - WLAN AutoConfig service has successfully stopped
Event ID 27 – Intel® 82579LM Gigabit Network Connection link is disconnected
I suspect the WLAN errors have something to do with windows fighting with the Lenovo access connection tools?
7. Since the machine still seemed slow I downloaded the program AS SSD and checked the performance of the SSD. When I compared my performance numbers to the benchmark numbers I found onlineI was very surprised to discover that I’m getting about 50% of the performance that I should (values below are read/write).
Seq: 262.11 / 188.32 (s/b 504.58 / 298.28) [MB/s]
4K: 15.83 / 44.92 (s/b 21.70 / 62.60) [MB/s]
4K-64Thrd: 165.23 / 154.46 (s/b 241.38 / 234.08) [MB/s]
Acc.time: 0.218 / 0.294 (s/b .0186 / 0.208) [ms]
Score: 207 / 208 (s/b 314 / 327)
Overall Score: 533 (s/b 797)
One more note - it seems like my cooling fan is running at a high speed almost all of the time. This is probably one of my power settings (I think I have it set for max performance) but it's even doing this when there is no load (i.e. I'm using IE and just vieweing webpages - like right now).
So, I apologize for such a long post but I’ve spent countless hours researching and troubleshooting this problem and haven’t been able to figure out what the heck is wrong here. Am I missing something simple or do you guys think I have a SSD and/or problem with the machine itself? To say that any and all help would be greatly appreciated would be a massive understatement – I’m on the verge of pulling my hair out and I really need this machine working as quickly as possible!
Please let me know if you have any suggestions and/or need additional information. Thanks in advance for your help!
-Erik

Lol gotcha about the drive as an option. I didn't go SSD with mine. Do you have the latest firmware on your drive? It is supposed to be v1.97. Just checking (ah and I see item 3 so guess so). Do you have the SSD drive toolbox software installed?
http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Solid+State+Drives+and+Cach...)
Seems some useful tools are in there. I can't say much beyond that with the drive. Oh. Why does your fan always run at high speed? Can you describe that? I mean, are we troubleshooting the right kind of issue? Is there anything else going on with your system? I saw about the reduced core speeds message. what are your system loads like? Anything causing high cpu utilization? Could be something other than the drive causing your low numbers and lockups.

HP Pavilion Elite e91804 experiencing lock-ups and crashing after LWSEP

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

1. Product name and number: HP Pavilion Elite e91804
2. Operating system: Windows 7 64 bit
3. No error message (other than blue screen)
4. My most recent change was sending my computer in for the Limited Warranty Service Enhancement Program, and receiving a new motherboard.
Before I sent my computer in for the LWSEP I was experiencing lock-ups and crashes only when I was multi-tasking (playing video games, listening to music, and having tabs open in firefox).
So I sent my computer in for the LWSEP to receive a new motherboard to fix these crashes, however after receiving my computer from them, the lock-ups and crashing have not been fixed and, in fact, have gotten worse. My computer will now lock-up and crash whenever I attempt to stream anything, be that music, video, etc. I can still occasionally play video games, assuming that I am doing nothing else, and that my computer cooperates with me (not locking up), but this only happens about 1/3 of the time.
My main confusion is that sending my computer in was supposed to fix my problem, not make it worse. Any help would be greatly appreciated.

K8n neo2 platinum lock-ups

Hello everyone, well here is the deal, I ust built yesterday my first amd64 system, specs are as follows:
amd athlon 64 3200+ Clawhammer
512mb ddr400 (single stick)
120gb sata drive
1 dvd unit, 1 dvd-ram unit
geforce 3 ti 500 (i know, i have to replace it)
soundblaster live! 24-bit
stock case psu
Before that, i had the same config but with an athlon xp 2600 + witch an msi k7n2 delta2, it worked fine. But this one, as soon as i start gaming the game will randomly slow down to a crawl and then lock-up the pc... I used to have this same problem with a kt4v which i replaced thinking it was gone bad, though i did notice on that board the 3.3v line was quite faulty, well same thing is happening here, at least i think
If i leave Corecell opened while gaming, the game will suddelny minimize, corecell will pop-up with an alarm and show about 2.8-29v on the 3.30v line... now before i go out and spend some money on a new psu, I need to know if this could be it ? or could it be the old gf3 acting up?
As i said, this same thing used to happen to me with an old kt4v paired with my old athlon xp 2600+, it stopped happening when i switched to the k7n2 delta2 but here it is back again...
help please!

Well I´m back, meaning that my lock-ups are back
Although this time I think they're not voltage - psu based... all my voltages are on their normal conditions, temps are doing just fine, I can even game with no issues, the problem is my computer is randomly locking-up
I have read and re-read this post, Because I am having the same symptoms as this guy did, just random lock-ups , no time interval, the conditions cannot be reproduced , so Im guessing its either
a) hardware
b) bios settings/bios
More info: I upgraded my bios to syar's moded 1.A, turns out I'm running on a Venice 3200+ (not clawhammer as I stated before) ... Cnq is disabled, so is spread spectrum, so is aggresive timings, no dynamic overclocking, no fast writes, no sideband addresing, memory timings are at the manufacturer's specs, no overclocking whatsoever, fsb 200*10 , htt 5x...
Just so u know, the computer has been powered on for the last couple of nights downloading and It runs fine idling, but when i start surfing, or doing whatever it will lock up on a random time/condition basis (it hasnt locked up yet while gaming though)

Adobe Reader 10.1.4 Lock-Ups

Hello,
When our campus users launch Adobe Reader 10.1.4 after logging on to a campus machine via a network account (with a re-directed app data folder) and launch a PDF from a network location by double-clicking it from Windows Explorer, Adobe Reader will launch, but then lock up and enter a "Not Responding" state after a few seconds of working with the PDF. I can only reproduce this issue with both the Enable Protected Mode at startup and the Show me messages when I launch Reader boxes checked (if either box is unchecked, the lock-up does not occur). If I wait long enough, sometimes, the "Not Responding" state will end and I will be able to view the PDF without issues. However, after a single reboot, the problem re-occurs. Our campus machines are on the 32-bit Windows 7 OS.
I have been able to reproduce this issue in Adobe Reader 10.1.2, 10.1.3, and 10.1.4, but not in Adobe Reader 10.1.1. I am not able to reproduce this issue using a local account opening a local PDF, a local account opening a network PDF, or using a network account to open a local PDF. The issue also does not occur if the user first launches Adobe Reader, and then opens the network PDF using File->Open. In other words, the issue only occurs when a network account opens a network PDF by double-clicking on it from Windows Explorer.
I did some research in the Adobe Reader forums, and here are the workarounds that I found and my success with them:
1) Uncheck Enable Protected Mode at startup
As I stated before, this does work around the problem, but also decreases security. As a troubleshooting step, I tried using the Adobe Reader documentation to white-list everything that Protected Mode was 'blocking'. The lock-ups still occurred even though the Protected Mode log was empty (after whitelisting) and did not indicate that anything was being blocked.
2) Disable Enable Hardware rendering for legacy video cards
This workaround did not work for me, even after disabling the legacy video cards and switching the preferred renderer to software.
3) Uninstall and reinstall Adobe Reader
This workaround was also ineffective.
4) Uncheck Show me messages when I launch Reader
As I stated before, this does work around the problem.
But these are not fixes - just workarounds. Does anyone know what the root problem is and whether or not Adobe will be addressing this issue?
Thank you in advance.

Hi, I can't offer any solution just agreements that it isn't just yourselves but others shared experiences:
The lockup began several years ago and subsequent versions of Reader have not altered the lockup problem one bit.
Typically the whole program loads, as does the document (it doesn't matter which PDF, any and every PDF cause lockup), you have about 4 seconds to scroll down or whatever action then... application completely freezes, states "not responding" and usually it remains entirely locked for at least 1 to 2 minutes while it hogs majority of system resources. When it releases, program again fully responds. Closing and reopening only repeats the same bad user experience.
Uninstalling, reintstalling, new versions, have no effect. Inevitably, the main result is to use PDFs significantly less as it is not worth it, yet ultimately it is unavoidable for documents.
Following your 1,2 and 4 has reduced lockup time to around 50 seconds but still not acceptable for regular use. This reduction and the fact that earlier versions on the same system platform worked 100% fine suggest to me it is additional (and for many users, entirely unecessary) Reader functionality such as trying to get messages, check updates (another to turn off), etc. that halt the software from working smoothly as it should rather than any problem with the host system.
I'd be very surprised to hear Adobe are unaware of the problem as there are many messages about this from a search and yet seemingly no definitive solution as far as I can find.
I too will recheck here in hope of a solution emerging.

P6N-SLI-FI Random Lock-ups

Hi,
New build listed below. Works great 99% of the time. The only issue I have is infrequent random lock-ups. The lock-ups occur either during windows start-up, or randomly while doing some non-stressing task (like web browsing or word processing). Currently at 2.4GHz, but have had it higher. I lowered it to 2.4 to see if it made any difference, but it seems about the same.
Since "lock-up" can mean a lot of different things I will describe it. The screen freezes totally. Does not respond to any input (CTR-ALT-DEL) etc. It often seems to occur in the middle of HDD access, and the HDD light stays on continuously. Hard reset is required to fix.
It has not locked up during a game, burning or transcoding a DVD or when running any stress tests. It happens VERY INFREQUENTLY (I just had my first one in about a week) and is not repeatable. The only other bit of info I can come up with is that is seems that it usually occurs during HDD access, and the HDD light is stuck on.
I almost wish I had the problem more often. If I had this problem regularly I would feel pretty comfortable troubleshooting, but as it is I could spend a lot of time changing things around and "think" I fixed it only to have it come back a week later.
My thoughts are either a RAM issue or my PSU. Thoughts?

Quote from: JoeFriday on 20-March-07, 12:18:23
Hi,
New build listed below. Works great 99% of the time. The only issue I have is infrequent random lock-ups. The lock-ups occur either during windows start-up, or randomly while doing some non-stressing task (like web browsing or word processing). Currently at 2.4GHz, but have had it higher. I lowered it to 2.4 to see if it made any difference, but it seems about the same.
Since "lock-up" can mean a lot of different things I will describe it. The screen freezes totally. Does not respond to any input (CTR-ALT-DEL) etc. It often seems to occur in the middle of HDD access, and the HDD light stays on continuously. Hard reset is required to fix.
It has not locked up during a game, burning or transcoding a DVD or when running any stress tests. It happens VERY INFREQUENTLY (I just had my first one in about a week) and is not repeatable. The only other bit of info I can come up with is that is seems that it usually occurs during HDD access, and the HDD light is stuck on.
I almost wish I had the problem more often. If I had this problem regularly I would feel pretty comfortable troubleshooting, but as it is I could spend a lot of time changing things around and "think" I fixed it only to have it come back a week later.
My thoughts are either a RAM issue or my PSU. Thoughts?
Do you have all the necessary options for overclocking disabled, C1E, EIST, all the spread spectrums. Also what are your cpu voltage and NB voltage set at...those two seem to have the most effect on system stability when ocing. Also what are your memory settings... I have your same memory and it refuses to work at anything but its advertised setting (800mhz at 4-4-4-15)

Is anyone using testing seeing compiler lock-ups? [SOLVED]

As the title says, is anyone using testing seeing compiler lock-ups? I've been seeing them for about two or three days. Sometimes the system will hang for a few seconds at "Starting make" with 100% CPU usage, then will continue normally. Other times it will stop in the middle of compiling and CPU usage will drop to 0. Also, I've been seeing small hang ups with patches. Maybe four or five seconds when simple patches are being applied. Bringing MAKEFLAGS down to the default 2 from 3 seems to help a tiny bit.

fakeroot would put it in the right time frame. I linked to your bug report Anarconda as it seems like the same problem. As always if anyone has anything to add, please do:
http://bugs.archlinux.org/task/13699

Windows 8: Bit Locker encrypted drive "Not Found" or "Access Denied"

I just upgraded my Windows 7 Ultimate to Windows 8 Pro. C drive is not Bit locker protected, but D drive is. When I go to Computer and double click on D drive, it tells me one of two errors: 1) Application Not Found (more common), or 2) Access is Denied
(less common).
I thought maybe Bit locker wasn't working, but I plugged in my USB stick that is encrypted and had no issues; it asked for the password and opened the folder.
One thing I did earlier was to setup a new local account, give it administrator password, then delete the other account that I had originally used in Win7 (and in installing Win8). Maybe this caused some sort of security problem.
Please help.
Thanks.

I have been using Bitlocker since it was available with Vista Ultimate. I have had the same password to unlock my drive for 5 years. I NEVER keep my recovery key this drive. but just last month i copied all my data to another drive formatted
it to freshen it up and copied it back over. For some reason i kept the recovery key TXT file.... when i tried your method here due to the same exact problem listed the command prompt would not allow me to enter a password in CMD or powershell. Since
i had the recovery key .. THANK GOODNESS it unlocked perfectly and i was able to retrieve my 6 years of Data. So yes, this works and works well. thank You!

Bit locker Mutliple Drives Mutliple OS's

I have a laptop with two hard drive in it. The primary has Windows 7 Enterprise and is a member of the corporate domain. The secondary has Server 2008 R2 and is a member of the lab domain. There is no trust or association between domain.
The laptop does the Windows multi-boot off the primary drive. I want to enable bit locker to secure the drives.
If the two windows environments were exclusively separate, setting up bit locker on each drive independently would be pretty straight forward, but when I'm in one OS, I will frequently need to get files and data from the other drive (and no, making each
drive big enough to hold all it's own data is not an option, plus the synchronization headache). Both drives will need to be bit locked to their respective OS, but the other drive will need to be accessible.
And not to make things too easy, the secondary drive, which i put in an optical drive bay carrier, routinely gets pulled (not while the system is running, of course) out and popped into a USB case to be used as a library transfer drive.
So....
the Windows 7 drive needs to be natively bit locked. and be accessible when running Windows 2008 from the second drive.
the Windows 2008 R2 drive needs to be natively bit locked, and be accessible when running Windows 7 from the first drive, and be accessible when run as a stand-alone USB drive on another system.
I would appreciate any wisdom you can share to make this all work. And please presume that i know next to nothing about installing and running bit locker, because that's pretty much true.
Let me know if you need more information about my configuration.
Thanks

Hi,
"and be accessible when run as a stand-alone USB drive on another system."
Firstly, if you enable bitlocker for one drive, it will be encrypted always until you decrypt it. Thus after you insert it to any system, it need to enter the credential to access it.
And then, if you want to access one drive in another computer, you need to get the shared permission. After you' re granted the sufficient permission, you could access it no matter if it's encrypted. Of course, another computer must be started.
Karen Hu
TechNet Community Support

P7n Dimaond Vista 64 bit lock-ups

Similar Messages

Maybe you are looking for