P965 Neo-F audio jacks not working.

I've been having serious issues with the audio jacks on the P965 Neo-F board. I have actually tried two boards, convinced the first board was defective since my speakers worked fine on other computers. On both the current board and the last board, I did a complete clean XP install, formatting my hard drives and installing the latest RealTek HD drivers (5.10.0.5404 dated 4/23/2007, from MSI). The first board never so much as peeped, while the board I have now has made some sounds, although I honestly don't know why. On this board, I had a set of Altic Lansing 2.1 speakers, but because the speakers would pop and make static noises every now and again, generally only if I bumped one of the small stereo speakers or wiggled the cords on the back of it, I thought perhaps the problem was the speakers being old.
On the current board, I tested a monitor that has speakers in it, and there was no sound. RealTek's sound manager, which I have installed, did not recognize that there was anything plugged into the jacks even though I had a line in, microphone, and line out plugged in. When it did recognize the lino out, it also recognized the microphone. However, it only recognized them for no more than a minute. The new speakers (also Altec Lansing 2.1) made one squeak for less than a second; other than that, there has been no sound at all.
I've tried several different RealTek HD drivers from MSI, Microsoft, and RealTek, but none have made any difference. I've enabled and disabled only to re-enable the audio device through BIOS with no success. I've checked the volume, DxDiag, and played music--Winamp and iTunes are both making sound, but no sound is coming out.
I'm pretty much out of ideas here. The only thing I can think to do is get a sound card, but I don't see why I should have to do that when I'm not an audiophile and the board jacks should suit me fine. I am quite at my wit's end with this, and would appreciate any help I can get.

Quote
It recognizes that I pluged something into the microphone jack but can't get the microne to work.
This problem usually has to do with the fact that the computer case used, or to be more precise: its front panel audio connectors are not fully Intel HD Audio compliant. Disable the Automatic Front Panel Jack Detection Function in the Realtek HD Audio Manager and retry.
If your mic still does not work as it should, browse through the Realtek Program Folder and look for an executeable file named "miccal.exe". Run it to calibrate your microphone. Also, enable "Microphone boost" in the Mixer-tab of the Realtek configuration program. The top half part of the mixer Tab ("Playback") can be scrolled to the left via <> buttons. Scroll left and localize the input jack your mic is plugged into (example: "Rear Pink In"). Click on the Options button and enable microphone boost.
Quote
When I go into the mixer settings I can't adjust adjust any of the inputs - cd, mic, line etc. Although it shows places for a sliding volume adjusters but doesn't show a slider to be able to adjust the volumes of the inputs.
That is totally normal and not a problem. It is basically a limitation of the Realtek HD Audio Driver in combination with Windows XP. It has nothing to do with the board. Here is an Asus-example:
There is nothing wrong here. If you scroll through that output devices/jacks in the Mixer tab of the Realtek HD Audio Manager, you will find that you can adjust the input/output volume for each audio jack individually. Doesn't make sense to adjust input volume in the output section? Well, ask Realtek which genius designed the interface and ask him personally.

Similar Messages

Msi p35 neo Front Audio Jacks Not Working

i have msi p35 mainboard and EZcool case in the front i have 2 usb,mic in and headphones jacks
the usb jacks are working and but mic and headphone jacks doesn't work
I instulled the driver and it Show me the jacks but the steel doesn't work
What should I do?
plz help me
now you can see my promplem in video

Deactivate the automatic front panel audio jack detection option in realtek hd audio manager.

P6N Diamond X-Fi Xtreme, back audio jack not working after windows reinstall

Hi everyone,
I've been having a problem with audio since reinstalling windows. Previously under windows xp sp3 i had no issues but after the most recent reinstall of windows xp, the rear jacks for the audio aren't working despite the front headphones jack working perfectly fine. Since this was only a short term measure, i didn't bother trying to sort it out until now, when I've now installed windows 7 on the computer and the issue still exists.
I'm using the latest driver available on the msi website http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1168 and I have also tried using the audio driver patch available on the same page.
The fact that there were no problems before a recent windows reinstall and that the issue is mentioned on the driver download page makes me think the problem is with the drivers and not with the hardware.
I searched through the forums and while a fair few people seem to be having the same issue or similar issues with audio jacks not functioning properly, i couldn't find a relevant solution for me.
Cheers,
Dave

Yep that sounds exactly like my problem. The issue lies with the on board soundcard and their vista drivers. Creatives' vista drivers are notoriously bad. This coupled with the fact their drivers won't even INSTALL on a p6n board because their drivers do not detect the onboard soundcard adds to the problem. As far as I see it there are two ways to solve this issue:
1.) Buy a front audio panel addition to your case.
I am not sure on your setup but here is one with HD audio support: http://www.newegg.com/Product/Product.asp?Item=N82E16813999356
And that will fix your back panel port, and give you the option to use the front as well.
2.) Buy a new soundcard.
This is what I did after learning that the onboard x-fi isn't even a real x-fi card. I opted to buy the X-Fi gamer (cheapest of the X-Fi cards) and so far the drivers have been acceptable in vista. My non-hd front ports work, as well as my back port.
Another alternative would be to wait for MSI to release an update to the creative drivers that they provide. No guarantee on that though.

Audio Jack not working on iPhone 6 plus

I have had my Iphone for about 4 days now and just the other day I found out that my audio jack does not work. I plugged my headphones in and instead of the music playing through the headphones it just continues to play through my speakers. I have tried several different headphones and I have even tried plugging an AUX cord into it while I was in my car and still nothing. Has anyone else encountered this same issue and if so have you found a way to fix it? Or is this something that I need to fix by taking it to my local apple store?

Given that it is practically out of the box, you should take it in and make it Apple's problem. They should fix it, replace it or refund you for a new one that works.

HP HDX 18t Audio jacks not working

Hello community,
the audio jacks aren't working on my HDX 18t 1200. headphoens don't work and neither does connecting speakers. What can i do?
Thank you,
Thomas

Download & Save the latest Audio driver.Go into Control Panel,Programs & Features- Uninstall IDT software.Shutdown the laptop.
1-remove power cord and battery
2-press power button for 30 seconds
3-reinstall only power cord for first startup.
4-power on
5-Try to install using the downloaded file.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Rear Audio Jack not Working on New Mac Pro

Hello All,
Here's the deal. I just pursuaded my company to buy a brand new Mac Pro to run FCP Studio 2 as a test run to see if they perform well enough to eventually replace our remaining PC's. We've had the Mac Pro for less then two weeks and I'm running into an issue that I can't resolve, and I don't want to fall on my face. The rear Audio input jack keeps failing. Meaning sometimes it works and sometimes it doesn't when speakers are plugged into. The jack on the front works fine, but the rear jack doesn't appear to recognize the speakers after the computer is shut down then restarted. You have to restart the computer 2 or 3 times before the speakers start pumping out sound. Which in all honesty is extermely dissappointing to me. And if I have to bring this thing in to get serviced, my boss will not move forward with buying anymore Mac Pro's, which I'm working hard to make happen.
Please help me out.
Thank you all for your time

Try resetting the SMC: http://support.apple.com/kb/HT1806?viewlocale=en_US.
Also try resetting the PRAM: http://support.apple.com/kb/HT1379.

Built In Audio jack not working for Guitar

I'm using Garageband 6.0.2 with my new MacBook Pro. I have a guitar plugged into my amp, and from my amp into the audio input jack on the MBP. I have the settings set to use the Built-In Input, but it doesn't pick up any sound from my guitar when I play; it's using the built-in microphone instead. (and yes, I'm using the Electric Guitar Track). All my cables are good, my amp is good, I've tried multiple different settings to make sure I'm not overlooking anything, and everything's fine until I try to get some sort of signal from the Built-In Input. It just insists on using the microphone.
I've succesfully used Garageband plenty on my last MacBook Pro, but this one just doesn't seem to want to cooperate. Can anyone please help troubleshoot this?

I am using GarageBand 5.1, but this should work with newer versions.
I recently put together a simple Garageband electric guitar setup. Here are the steps that I took to use the audio input jack.
Required Materials:
Guitar
1/4" to 1/8" cable (Adapter acceptable)
Macbook
Headphones or External Speaker
First, plug in the headphones or external speakers. This will prevent any unwanted audio feedback, which could damage your macbook.
Next, open system preferences and navigate to the Sound preference pane. Command+Space "Sound" should get you there.
1.) Click the input tab and you should see two options: Internal Microphone and Line In. Click Line In.
2.) Plug your guitar into the audio line in jack on your Macbook. You should see the Input Level jump when you plug in your guitar. Strum normally and adjust the input level. I turned it all the way up for my acoustic-electric guitar, but if you have an electric guitar with good pickups, you may have to turn it down.
3.) Open GarageBand and select "New Project" subcategory "Electric Guitar".
This is the extent of the information that I was able to aquire through Apple GarageBand documentation. Everything that follows is either third-party or trial and error.
4.) Open GarageBand system preferences (Command+ , ). Open the second tab labeled "Audio/MIDI".
The first two settings are "Audio Output:" and "Audio Input:".
Changing both of these options manually to "Built-In Output" and "Built-In Input" guarantees that you will be able to record and modify audio from your guitar and hear it live. Clicking "Optimize for Minimum Delay" is useful if you want to hear your guitar with effects with minimum lag.
I have experimented with changing these settings with limited success. If you learn anything new please contact me on my profile.
An Apple a Day...
Doctah Wilson

Headphone and other audio jacks not working on msi GT 70

I was wondering if anyone could tell me why the headphone jack isn't working properly on my new laptop. When I plug them in it only works in one ear and the onboard speakers still play. Also nothing pops up from realtek when I plug them in. I have already tried uninstalling and reinstalling the newest version of realtek.
I have been having a heck of a time with the graphics cards. It will not default to the Nvidia GTX 670MX when I am in a program such as adobe premiere pro or photoshop. I went into Nvidia and changed the certain programs that I wanted to run the Nvidia card - still wont run off of it. I changed the global setting to Nvidia - still nothing. Finally I just disabled the intel driver in the device manager. It works fine now except exported video is very glitchy on the players. It plays the videos fine when I enable the intel driver again.
I guess I can live with the graphics card problems, but can't live without the headphones working. Any help is greatly appreciated
Thanks

be sure everybody has same problem https://forum-en.msi.com/index.php?topic=180629.0 or https://forum-en.msi.com/index.php?topic=180690.0 I found a way if you had new nvidia driver delete nvidia sound driver after delete your msi sound driver after reboot , install your msi sound driver it will be normal but if not try first msi driver after nvidia with beta or new sound driver if still not use realtek new drivers but dont forget delete nvidia sound driver , but you should always repeat it , msi couldnt fix this problem just offer to use old driver and old nvidia driver

Audio jack not working when cover closed and hdmi connected

Pavillion Sleekbook 14 (14-b017cl)
Windows 8
I have an external monitor connected via the hdmi port. My external monitor does not have built in speakers. I connect an external speaker via the headphone jack. I can play audio fine if the notebook cover is open. As soon as I close the notebook cover, the audio stops. How can I get the audio to still be sent to my external speakers with the cover closed?
I have my power settings set to "Do Nothing" when lid is closed. I don't know what else to try?
Thanks for your help.

What is the status of the TV when the lid is closed? Does the image remain as it should?
Try installing this audio driver as it was released after the launch of Windows 8.
What program is playing the audio? For example, a music player or movie program? Is there no audio in any program when this happens?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

My Hp Laptop audio jack not working...!

Hi Frendz,
When ever i detach my head phones or ear phones in my laptop the audio got muted. I tried all my sound settings ...it working fine without head phones...but when i put header phones and i like to remove my head phones...the loptop got mute,....i am totally fedup ...kindly suggest any solution for the same....
thax....!

Hello Ashad,
What is your product number and operating system?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

XPS 8700, audio is not working

Hi,
I got this new desktop last month. From the beginning the audio is not working. When I tried installing the drivers from the dell site, I get this error. My system details are:
XPS 8700 (Mid 2013)
<private data>
When I install this:
Audio_CREATIVE_W7_W8_W81_A00_Setup-241T2_ZPE.exe
I get the error setup is unable to install.
When I install this:
XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.EXE
I get this error =
Vendor Software Return Code: 3
[04/01/15 10:16:01] logo.png
[04/01/15 10:16:01] Name of Exit Code: DEP_SOFT_ERROR
[04/01/15 10:16:01] Exit Code set to: 3 (0x3)
[04/01/15 10:16:01] Result: FAILURE
[04/01/15 10:16:09] Open file: C:\ProgramData\Dell\UpdatePackage\Log\XPS-8700_Audio_Driver_313J8_WN_6.0.1.6909_A01.txt
Please tell me what to do

The audio loaded correctly. Plug speakers or head phones (not wireless head phones) into the rear green audio jack. Then the red arrow should disappear under Sound- Playback Speakers.
The KM632 USB adapter should be unplugged, then plugged back into a USB port on the rear of the XPS 8700.
Do that and see if these change.

MacBook Audio Output Not Working, Except for Garageband?

Good day everyone,
I have a 13-inch MacBook '08, current version 10.6.8 (can't upgrade to OS X Mavericks – hardware is too old), and I've had a serious problem, and I feel that I've tried EVERYTHING to fix it.
My Macbook audio output does not work AT ALL while trying to stream video (i.e. YouTube, Vimeo, etc.) or listen to music. When I play with the audio adjustment buttons, it doesn't even make the "popping" sound. It DOES however have audio output when I open Garageband and play the instruemnts i.e. Grand Piano. It also plays the "start up" sound when I boot my MacBook up. Otherwise, the audio seems to not work at all.
I've played with the "Sound" settings on "System Preferences." I've played with the audio jack (note: there's not red light, so that's not the problem), I've blown into the hole, stuck paper clips in there and fiddled around... nothing. Please help, I'll take any advice!
Thanks in advance.

Well, even though the input jack had no red light, I performed the actions demonstrated on YouTube in the video "How to fix macbook red light head phone jack" and the problem is fixed.
- mb

Mic Jack not working after Driver Update, Console unavailable, can't install

LMic Jack not working after Driver Update, Console unavailable, can't install? I've had nothing but problems after downloading the latest updates via the auto-updater.
I'm currently using the Creative SB X-Fi Pro Series card. I've had it for close to 6 months and have not had any issues until I ran the auto-updater last night, and while it downloaded over 250Mb of updates, all of them failed to install as described below.
I'm running on Windows Vista Ultimate, 64-bit
My main issue is the fact that my microphone is no longer working. I've done a lot of searching and I think the problem has to do with flexijack not being a microphone jack, but instead is an 'in-line' jack. I can no longer find my audio control console, which allows me to switch between gaming and entertainment modes, ect. The solution I found on the KB says that you can switch the blue jack on the back of the card from an in-line jack to a mic jack within the Audio console. I tried downloading it, but while going through the install, I get an error saying the files could not be found and a prompt which asks for a disk or file location. The same thing pretty much happens with all of the items I attempted to download and install.
I was able to run console fine, as well as use my mic yesterday before I attempted any updates. I attempted the updates because since I've had the card, I've had issues where after I exit a game, all my sound will become crackly and static. Before, I would simply open up the console and switch back-and-forth from gaming to entertainment, which would fix the problem most of the time. If that didn't work, a restart would fix it, but now I've opened up a whole new set of issues.
Any help would be greatly appreciated.
I also want to say that the support tickets should not require a serial number to submit a new ticket. My product is registered, so I got rid of the box which contains all that information, leaving me at the mercy of these boards...

Hello all. Fisrt of all, this are my specs: Yoga 2 pro 13". WiFi card: Intel(R)Dual Band Wireless-AC 7260. I bought it from Best Buy on November 27, 2014. If you aquired your Yoga before this date, you may have the single band WiFi card. As many of you have experienced, I also had a bunch of issues with my WiFi connectivity and this is how I was able to solve it. At least it has been a couple of days that I haven't had any issues. The first symptom was the usual connection drops every X amount of time. For me it was about every 2 hours. I first unchecked the "Allow the computer to turn off this device to save power" option in the Power Management tab of device manager and disabled U-APSD support in the Advanced tab of device manager. This action did not solve the problem. I then downloaded and updated the driver from the Intel web site (http://www.intel.com/p/en_US/support/detect) and this seemed to solve the drops; however, a new problem arised: Everytime my Yoga would wake up from sleeping mode, all my wifi networks were gone and the adapter showed as disabled in Device Manager. I would have to anable it to have my networks back. It was a solution but a pain the butt to have to do this everytime. After hours of reading post after post in several forums, I read a repy from Lenovo asking to try leaving the "Allow the computer to turn off this device to save power" CHECKED if you were using the latest version of the driver. I went back to device manager and checked it back and that seems to have solved the problem. So far I haven't had any drops and everytime my laptop comes back from sleeping mode the WFi connection is still there! Here is a recap of how everything ended up: -The driver version I installed is 17.1.0.19-The driver date is 7/21/2014-In device manager|Advanced, U-APSD support is Disbled.-In device manager|Power Management, "Allow the computer to turn off this device to save power" is checked. Hope this helps somebody else.

My audio does not work on my pavilion dv4. i just bought this laptop a few days ago. what's going on

my audio does not work on my pavilion dv4

This worked for me.
Hold down the option key while using the Finder “Go To Folder” command. Enter ~/Library/Preferences/com.apple.dashboard.plist. Move the .plist to your desktop.
Log out/in
If it works, delete the .plist on your desktop.
If the same, return the .plist to where you got them from, overwriting the newer ones.
If you prefer to make your user library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.4. I have also been informed that if you drag the user library to Finder it will remain visible.

My Facetime audio does not work on my MacBook

My Facetime audio does not work on my MacBook, video is fine. Volume set to max, internal mic is "on", mute is 'off'. Advise

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

P965 Neo-F audio jacks not working.

Similar Messages

Maybe you are looking for