P965 Neo-F V2 + core 2 duo 4500 !!!!! Multi problem , big one !

P965 Neo-F V2 + core 2 duo 4500 !!!!! Multi problem , big one !
Does enyone know how to put manualy the multi for this cpu on this BOARD ???!!!!!!
I have allready flash to last bios 3.7 . In the bios is 4500@2200 mhz ( 11*200 ) 800 mhz dram .But in windows i belive is enable something becose the cpuz shows x6 multi = 1200mhz.If an apllication is started the multi becomes 11 ( normal ) .
I geast whant to put manualy multi 11 !!!!! There are no seting in bios for that !!!!

yes, it's power saving feature.
there's no problem to stay 11x during idle. But it saves more power if it goes down to 6x. Do you wanna leave your car engine at high rpm while your car is sitting at the traffic light??

Similar Messages

P965 Neo-F and Core 2 Duo E6750 ... #@?!

So this topic is about combination MSI P965 Neo-F and Intel Core 2 Duo E6750 processor ...
question is ... is this combination possible ?
... its possible to BIOS 1.10 has support for E6750 ?
... ... its possible to eat bannana each day without consequences ?

hmm :-( so ... thank you for answers
what i can say now ... i made my own research
NovJoe: .. P965 Neo-F ... no P965 Neo-F V2 ...
Maesus: i trying to be friendly to each user here ... but i can be little bit sarcastic when i talking about P965 Neo-F, because this mobo is simply not well designed (i have almost one year experience with this mobo ... please accept it ... i am serious and not angry, hostile or "firebrandy")
Quote from: Maesus on 31-July-07, 13:28:00
The answer is NO. Does NOT support.
OK, thanks for link ... i see this before of course ... and look at right top corner - there is "Since BIOS Version 1.9". So we can click to BIOS tab on this site and we will see this "Version 1.10 Update Date 2007-07-05"...
(i hope you see the diference...i really asking for somthing for what i not found answer in this forum or old MSI papers)
So its on me to explain why i opened this thread ... there is place for others who HAVE this mobo and tryed BIOS v1.10 (and newer versions in future) and has any experience with this etc etc.. or directly with E6750 (or simply 1333Mhz cpus). Without rant... without voodoo...
RemusM: Many thanks to you for not attacking me ... again and again i found your replies verry useful a serious (and with sense for humor... good thing i mean)
to your answer ... ok. I know that owners of this board have problem to reach 333Mhz on FSB (base frequency - needed to 1333Mhz cpus) and 1333Mhz is not supported (like in cases of many other boards .. for example Neo-F Platinum).
P965 Platinum is able to run this processor ..
Neo-F V2, Neo2 ...(sometime also called Neo-FI, Neo2-F V2, Neo2-FI etc etc) ... are also now able to run with E6750
And this mobos aren't originaly designed for this purposes...
... now, do you see what i mean? ... its about future support ...
will have this mobo in future support for 1333Mhz ? It is possible ?
but i have bad feeling that this mobo is mistake and MSI know it (Neo2 is proof for me) ... and support will silently die ...

Problems with P965 Neo and E4500 Core 2 Duo

Hope someone can help.
I have a gadget for Vista that shows core usage. The second core does not register at all when running a performance test. Also, when I look under "My Computer" at the Properties it shows:
Processor: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz 1.10GHz
Also, my Windows Experience Index for my processor is only 4.3, seems low for the processor.
Makes me wonder if the second core is toast? Why would it show 1.10GHz? Looking at my BIOS version, I believe it's at 1.5 (I've never updated it since it came out of the package) but the Live Update Online utility says there are no newer versions available. I tried to download the BIOS update off MSI's website, but when I click on the .exe file, it flashes and then goes away. So fast, that I can't even read or see much of anything. The instructions that were included do not cover Vista, and say I have to get a 98/XP boot disk??? When has that ever been necessary for a BIOS update?
Anyway, any help would be appreciated.

Hello and Welcome to the Forum!
BIOS-Updates
BIOS Updates should be done in pure DOS mode. Flashing from a Windows Environment is very risky and should be avoided if possible. Flash your BIOS only if you are aware of the risks of BIOS Flashing. Updating the BIOS should be the last resort in troubleshooting. If you are sure you want to flash a different BIOS use the Forum's USB-Flashing. It is easy to use and prepares the Flash Drive automatically for a DOS-Flash. You can find it here:
https://forum-en.msi.com/index.php?topic=108079.0
Quote
The second core does not register at all
Is your CPU properly recognized in BIOS and during POST?
In BIOS, make sure the following options are properly set:
ACPI = Enabled
(IO)APIC = Enabled
MPS Table Version = 1.4
If you are sure these options are as shown above, force Vista to re-detect proper HAL during startup. You have to find Vista's Advanced Boot Options dialog box in order to do that:

Macbook Core 2 duo - lion install problems.

I picked up a used white Macbook Core 2 Duo (2007) recently. The person I purchased it from installed a new 60GB SSD drive and 4GB of ram and put Lion on the machine. The computer booted fine for the first 4 times, and then on the 5th time it said "Installing OS X" and then said there was an problem with the install???? The computer was working fine before all this happened. Now it won't boot.... BTW I did not do any any updates.
We removed and tested the SSD drive... it appears to be fine.
My other problem is that the person who sold the computer to me did not give me original OS disk... is it possible that the OS he used is corrupted? But then, why would it work fine and then give me the error message after the 5th boot?
Is the problem because I am using an SSD? ... but still makes no sence considering it was running fine before the 5th boot!
Please help, I am looking at purchasing my own copy of Lion and installing it but will this work without having the original Disks?
Thanks!
(P.S. When it did work, the Macbook with the SSD and Lion ran dramatically faster than my 2009 15" Macbook Pro.!)

Thanks everyone for their help... it was another bad disk!
I returned the OCZ HD and replaced it with an Intel SSD... The thing has been running spectacular now! It out performs my Macbook Pro (speed)!
FYI.
I did some digging and on the OCZ forums there has been A LOT of similar complaints regarding the HD failing in the same way mine did... when I took it back for a refund to the store I purchased it from, the tech said that they have been getting a lot of returns on that specific manufactures SSD's... and not just the entry level ones.
Thanks again!

Core 2 Duo Macbook wireless problem

hey everyone, i am new to this as i have had my macbook for 3 months and nothing has gone wrong until now. I have had problems with my macbook and my linksys wireless router. the other computers in my house are pcs and they work fine with the router. the minute i connect my macbook using airport, the network crashes or loses its signal strenght with all of the comps. does anyone know how to solve this problem or have there been any other situations like this. any help would be greatly appreciated.

Hi all & especially any Apple Support engineers who may be able to help with a fix on this!
I've just purchased my first mac (Dec 06), one of the new 2GHz Intel Core 2 Duo Macbooks, and I'm very very pleased with it, apart from this one thing...
I also have wireless access problems - I can't get the Macbook to AirPort connect to my BT-supplied 2-Wire 1800HG (Home Gateway) router, even after applying the recent 'AirPort Update 2006-002 13-Dec-06'. It seems to be a problem with just particular router families (may be wider than just 2-Wire products) as I could AirPort connect just fine to my parents wireless network while staying with them over Christmas. They use a UK phone company (BT) provided Voyager Wireless router, so a different brand, but with exactly the same wireless security as I do (128 bit WEP).
Before anyone asks, I know my router wireless setup works because other wireless products in my home (including an Apple Airport Express I use for iTunes streaming) work just fine! It seems to be a MacBook vs. 2-Wire thing!
The Macbook works fine when connected into one of the router Ethernet ports directly using a cable, but that's not exactly convenient for use in other rooms in the home!
So it looks like another revision of 'AirPort Update xxxx-xxx' is needed, this time with the necessary data for the 2-Wire router family (as must already exist in my 1.5 year old Airport Express!)
Please can you fix this for me Apple (and let me know when it's been done!)
Many thanks and Happy 2007!
Mark
Ipswich, UK
Macbook (Core 2 Duo) Mac OS X (10.4.8) 2-Wire 1800HG Wireless Router

Imac 2.4 GHZ Core 2 Duo - Sudden Wireless problems (after 1 year + of use)

This is weird.
I have three macs on my wireless network. All work find and blazing fast until yesterday.
Now, my Imac 2.4 Core Dual internet speed is so slow or does not work at all.
The other two Macs (Macbooks) work fine.
Any suggestions of cause?
Additional info:
Nothing was changed on the Imac. Nothing was downloaded. One minute everything was fine and then next...nothing.
I have tried restarting.
I have tried reseting the airport.
I have even let my Imac shut off for 24 hours.
After restarting, load time gets better for one or two pages and then poof! Back to slow/non existent loading...
Any ideas helpful.

Try this - Open network preferences, make sure WiFi is selected, click the Advanced button, click TCP/IP, click Renew Lease.
While you are in the same screen, check your DNS settings and compare them to your machines that are running fine.

Msi p965 neo-f and geforce 9600gt

I've got question.
When I look at the spec from my new xfx geforce 9600gt xxx card I see PCIe x16 2.0
Will this card work on my motherboard ? because when I look at the spec of my board I can see that there is 1 PCIe x16 slot and no 2.0
Will it work?
spec pc
Msi p965 neo-f
intel core 2 duo E6400 @ 2.13ghz
Geil 2gb 800mhz
coolermaster 400watt psu

Quote
check Amperage on +12V rails (you sum up 2 rails)
Simply adding the amperage values if there are multiple +12V rails is not the right approach to determine the maximal amperage limits for all +12V rails. You cannot simply sum up the two rails. On many PSUs, the combined amperage limit is significantly lower than the sum of the individual rails. Look at this example for instance:
If you add the amperage values on both rails together, you get 34A. However, the limit for both +12V rails (as stated on the PSU sticker) is 250W which can be broken down to 250W / 12V ~ 20.8A. So what we have here is a 20.8A limit on a +12V rail that is split into two individual rails that each have their own amperage limit. You can put 16A or 18A load on the individual rails, but not more that ~20A combined load on both. That means that if the system draws 15A from one of the rails, only ~5A are left for the other one.
Quote
coolermaster 400watt psu
He did not mention which model he is referring to, so I am not sure if I checked the correct specs. Here is a link to the Cooler Master eXtreme Power Plus 400W (RS-400-PCAR/PCAP-A3) for comparison:
http://www.coolermaster.com/products/product.php?language=en&act=detail&tbcate=22&id=3765
As you can see, we have two +12V rails (16A/18A) and a combined limit aif 280W [280W / 12V ~ 23A] ... not 16A + 18A = 34A(!). Of course 23A could be be enough to power a core 2 duo and a 9600GT but we are most probably approaching the limit of the PSU here. He did not mention the number of optical drives, hard drives and fans connected to the system. Each of these devices is powered by the +12V rails as well and will have their share of resources.

P965 Neo-F V2 boot cd issues

Good Evening,
I got about 5 news systems with a mix of the P965 Neo boards. Some are the old Revision 1.1 with the Award bios and others at Rev 2.1 with the AMI.
These came with windows oem installed.
With myself owning a rev 1.1 Neo board at home I had no problems setting up those systems with and using GHOST.
It's the Neo-F V2 boards I have problems with.
Spec:
Antec Sonata with a Antec Trio Power 550watt PSU
MSI P965 Neo-F V2
Core 2 Duo E6600
OCZ Platnium Rev 2.2
GeForce 8800GTS 320meg
80 gig Seagate 7200.10 SATAII
Sony IDE DVD-Rom
What I notice from the boards is the ide controllers been different. Also the options in the bios for configuring them been different when compared.
The only boot cd I got to work out of the 3 systems based on that V2 board was the Windows XP Home OEM cd that came with them.
My Linux distros burnt on Taiyo's, Verbatims couldn't boot. It would show a blinking cursor then start dropping down 10 pixels when each dvd-rom seek scan then hit the bottom of the screen and stayed there. My GHOST 11 network boot cds couldnt boot either same display output. These have been tested and verified in other systems. I also use the same dvd-rom that came with these computers.
I'm abit at a lost seen how I need to create my images for when more are ordered.
Thanks for any help,
Malbojia

Quote
My Linux distros burnt on Taiyo's, Verbatims couldn't boot. It would show a blinking cursor then start dropping down 10 pixels when each dvd-rom seek scan then hit the bottom of the screen and stayed there. My GHOST 11 network boot cds couldnt boot either same display output. These have been tested and verified in other systems. I also use the same dvd-rom that came with these computers.
Quote
It's the Neo-F V2 boards I have problems with.
The board has a Marvell 88SE6111 Controller to provide an IDE port (P965 Neo uses a JMicron Controller). As far as I know, Linux Distribution have to come with Kernel v2.6.20. to support Marvell Chipsets correctly. Could that be it?

RAM maxi for iMac 2,4GHz Intel Core 2 Duo

thanks a lot in advance : is it a good idear to have 6 GB in RAM DDR2 SDRAM 667MHz-( 4GB + 2 GB )-
on my iMac, processor 2,4 GHz Intel Core 2 Duo ( 20-inch ) ?

This one ?
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.4-20-inch-alu minum-early-2008-penryn-specs.html
If you or your Mac really needs the 6GB RAM than sure.
The slight decrease in speed due to not using paired-RAM isn't comparable to the gain you get from the additional RAM.
Have you used Activity Monitor as described in here Mac OS X: Reading system memory usage in Activity Monitor to determine whether you need more RAM ?
Stefan

P965 Neo and core 2 duo issue

I have a P965 Neo
Vista x64
Intel Core 2 Duo 2200
4Gb Ram
ATI radeon HD 3650 512Mb
Core 2 duo processor seems to run a lot warmer than I think it should, both idlling and running high demand things (like games). Real Temp show the cores running at 83degC at times when CPU has been running at or close to 100% constantly. SpeedFan also shows high temps, and I have tried to control the fan speed using this program, but the max RPM of the standard Intel fan is approx 2000RPM, which I think I have it running at constantly.
I have just bought and Arctic Freezer 7 to cool it a bit more, but Im hoping someone has some help re some BIOS or other settings I can tweak to remedy this. Dual Core Center doesnt run on Vista x64 (I think), so I cant use that for anything.
One point I did notice was something about the CPU and 550MHz in the BIOS - offhand I cant remember what this was (Im at work now).
The RAM seems to be running at 800MHz, and the FSB is 200MHZ (ie not over or underclocked). I dont see any option to adjust the CPU Multiplier if this is a solution.
I hope this gives someone enough info to help! If you need anything else I can post it when I get home.
Firstly - apologies if this has been answered or is a stupid question - Im working my way through the forum trying to find answers, but nothing yet.
Im newish to the PC building game, and I know the basics, but BIOS stuff, overclocking etc is still unknown to me

Quote
I can say I have not updated the BIOS from whatever was delivered in the box. If it helps I have this info:
Phoenix - AwardBIOS v6.00PG
That is not your BIOS Version. Check your current BIOS Version by looking at the information displayed on the POST Screen:
In your case it should say: "W7235IMS V1.??"
Quote
When you mention, real temp running at 83C, may i know where you're monitoring from?
Cas, he says he is using Real Temp to check is processors Core Temperatures. Real Temp is a Windows based application:
http://www.techpowerup.com/realtemp/
Quote
I would suggest you to monitor the temp in bios either under hardware monitor or health status
Note that the BIOS does not display Core Temperatures (which are read directly from the registers of the processors). The CPU Temperature displayed in BIOS depends on an analog sensor. CPU Temperature and Core Temperatures cannot be simply compared.

PC freezes. (P965 Neo-f & Core 2 Duo E6400)

Hello,
I need some help.
My system became instable since I did a clean install.
It just freezes, especially when using heavier apps (within 5 min).
It is running winxp (Dutch version incl all win essential updates) and I used “live update 3” to get the latest drivers.
I did flash my bios (that wasn’t probably the smartest thing to do).
I already read some stuff on the forum (like the 1.9V my DDR2 need)…
and i installed “MSI Core Center” (system temp 35°, cpu temp 45°-50°).
But I didn’t discovered what my problem is.
Can anybody help me out please?
Kind regards,
Simon
My system:
INTEL Core 2 Duo E6400 2.13 Socket 775
MSI P965 Neo-f Intel P965 Socket 775
MSI Nx7600gt-t2d256ez Passive 256mb Pci-express 7600 Gt
CORSAIR Twinx Ddr2 1024mb Pc6400 Xms (2x512mb)
ANTEC Sonata Ii 450w Black
WESTERN DIGITAL 320gb-ks 16mb Sata300 7200rpm

Quote
Because since I remove "the one" stability rules again in computer-land.
Quote
Saturday I’ll go to the shop to get some fresh ones.
I hope those fresh ones will not start a revolution in computer-land and serve as they should be.

P965 Neo and Core 2 Duo 6400 Issues

I have P965 Neo and Core 2 Duo 6400 and Win XP SP2 with all mainboard drivers installed. The problem is that the system recognises only one of the two cores...Any idea?
Here is a full report made with PC wizard 2006 [html included in rar]:
Code: [Select]
http://rapidshare.com/files/10863989/pc.rar.html

I had the same problem with my E6300, the only way to resolve was to reinstall windows then both cores were recognised! Nothing else worked.
See this similar old link: https://forum-en.msi.com/index.php?topic=102262.msg747994#msg747994

"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

Quad Core Support P965 neo-f

Im just wondering if there will be a bios update for this motherboard P965 neo-f that will support quad core processors. On this site they have a list for some of the motherboards that will support Intel's Kentsfield http://www.anandtech.com/mb/showdoc.aspx?i=2848. P965 neo-f isn't there. Thx in advance

Quote from: dimitri on 05-October-06, 22:54:47
Quad Core Kentsfield works on 975X PUE
http://www.xtremesystems.org/forums/showthread.php?t=106175&page=2
but not on p965-neo...(yet?)

Intel Core 2 Duo on MSI 915PL Neo?

Hello,
Can I put an Intel Core 2 Duo into an MSI 915PL NEO?
If not, can I put in a smithfield dual core?
Thanks much.

Thanks for all the replies.
I'll just upgrade to the fastest single core for it that I can then. It's my daughters computer
and her celeron is dragging on Vista a bit.

P965 Neo-F V2 + core 2 duo 4500 !!!!! Multi problem , big one !

Similar Messages

Maybe you are looking for