P965 Neo2 V2.1 and E8400 (E0 stepping) not working

Hello,
I have tried to upgrade the CPU of my P965 Neo2 V2.1 from E6600 to E8400. I checked the CPU compatibility list for E8400 on the MSI homepage before purchasing. It lists E8400 as comaptible with my board.
Unfortunately after displaying the BIOS splash screen and counting the RAM the system locks up.
1. I cannot access the BIOS. Keyboard input is ignored.
2. Yes, I have reset the BIOS.
3. Yes, I have upgraded the BIOS to V3.8 as listed in the CPU compatibility page on MSI homepage.
The only difference in CPU is in the stepping: compatibility is with E8400 C0 stepping, my CPU is E0 stepping (SPEC codes are different). Checking on the Intel webpage I see both CPUs are 45nm technology.
Is there anything I can do to make the E8400 work with my P965 Neo2 board?
Regards, Andreas

Although I doubt that there is a BIOS that adds support for the E8400/E0 it probably won't hurt to contact MSI Technical Support and ask if there is a newer BETA BIOS that may help you, Maybe you are lucky:
http://ocss.msi.com.tw/

Similar Messages

Galaxy S6 Edge Screen Rotation and S Health steps NOT WORKING

I know about the screen rotation problem after some research. I bought my S6 edge on 4/10 and the screen rotation stopped working on 4/24. Now my s health daily steps stopped work today(4/26). I called samsung this morning and they tried to clear my cache to fix the screen but no luck on fixing. They think the s health problem is due to the screen problem also. Is there any other tips for a fast fix or do I wait for a software update? Also does anyone else have both these problems together?
Thanks
Victor

No help anywhere. Verizon told me to wait for the update coming soon. So i been waiting and checking everyday. I can replace my phone with a refurbished one but I want a new one since mine was new when this issues first occur.

Keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling :(

keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipod

I just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.

TS4062 My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out

Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?

Hi troy157,
I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
If the issues persists, the article below will give you a few more troubleshooting steps:
iOS: Troubleshooting applications purchased from the App Store
Try the following steps to resolve your issue, testing the app after each step.
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
Ensure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your device
Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
I hope this information helps ....
Have a great day!
- Judy

Copy and Paste of Images NOT working.

When I right click on an image and choose 'copy image' and then try to paste it into my editing software, all i get is a string of text that is the location of the image as if I had chosen 'copy image location' instead. what gives?

I too was unable to copy & paste ''IMAGES'' suddenly. This function continued to work correctly in my Internet Explorer and Chrome browsers while not working in Firefox. (I WAS able to copy & paste ''''TEXT'''' however in all 3 browsers.)
As described by another poster, I would click on "Copy image" as I always did, but instead of the image appearing when I clicked paste, the ''URL'' of the image appeared instead.
My computer developed this problem suddenly yesterday after downloading and installing the newest version of Firefox, which is 12. I tried some of the suggested solutions here to no avail, but I strongly suspected the problem was with Firefox 12. To test this, I re-installed Firefox 11 and immediately my copy & paste function started to work correctly once again and I am now able to copy & paste images once again.
I will not install Firefox 12 again until Firefox corrects this problem. I need this function and do not want to have to deal with a convoluted method of saving a graphic with unnecessary extra steps, thank you. Every single time I upgrade Firefox, something is incompatible with the new version and no longer works. This is always a nuisance, especially when it is my Norton toolbar.
This time it was my copy & paste function (again, for images only.) Anyone else with this problem should re-install Firefox 11 to see if their copy & pasting of images function is suddenly restored, as mine was. Good luck! :)

HT1349 Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and

Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>

Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG

TS3048 Right click on Mighty Mouse and Wireless Keyboard are not working

I have a 24" iMac, early 2009 Lion,10.7.5. My wireless keyboard and mighty mouse are not working properly. Wireless keyboard- I can turn it on and it will ask me to pair it with the Blue Tooth. I cannot log the numbers in - I even tried logging them in with my wired keyboard device (which is an Apple keyboard).
My Mighty Mouse's right click stopped working as well.
I have gone through all of the troubleshooting steps-
New Batteries - Cleared Blue tooth preferences list, repaired permissions, Cleared cache, Made sure that the settings were correct ex: key was not checked on mouse, Removed both devises (keyboard, and mouse) from blue tooth and allowed them to be discovered again, PRAM reset, Hardware check/ reset, and lastly, Reinstall of OSX.
I am still having the same issue with both devices.
Thank you.

This is why you should always have a wired keyboard and mouse as backups.
Try smc and hope for the best.
I'd also suggest pram reset but you need the keyboard for that.

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

Hello Sarahd200037,
Thanks for using Apple Support Communities.
To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
iPhone: Microphone issues
Take care,
Alex H.

Security and privacy system preferences not working after Lion install. What to do?

Security and privacy system preference not working after Lion install. Not sure if it happen with Lion installer or after updating. What to do?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren

Why?
Do you expect an answer to that question based on the information you have provided so far?
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325

Need help to cancel by Creative Cloud Subscription and Live Chat does not work

I need to cancel by Creative Cloud Subscription and Live Chat does not work for me. The the chat only sent me :You are not currently connected to a chat representative. When a representative was online and I can't send my message out.

Hi Joshua_U,
I would request you to to perform the steps of cancellation mention in these links
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html.
In case you are still unable to complete it, please inbox me your order number.
Note-( Any Creative Cloud whose date of purchase is more than 30 days attracts a penalty except if you are opting to exchange it with different type of CC subscription, the order number of the exchange CC is required to fore go the penalty if applicable)
Regards,
Rajshree

Just installed Office 2011 on my MacBook Pro Retina and now Safari does not work

Just installed Micro Office 2011 on my 13" MacBook Retina and now Safari is not working correctly. Pages load very slowly or not at all.
Any idea of what's wrong?
Thanks

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

After BIOS update Intel Speed Step not working on Satellite A500

I upgraded my Satellite A500 PSAM3E model to the newest BIOS 1.50, now the Intel speed step not working!
My CPU is always 2GHz+, I chagned Power Plan to balanced, but no change... with previous the CPU was around 800 MHz.
When I try to change Windows 7 power management and set maximum CPU performance to 50 or 80% the system freezes.

Hey Szaby59,
Which older BIOS version did you use before update to 1.50?
I also use the maximum CPU performance option for Eco mode (50%) but this does work properly.
Furthermore it would be interesting to know if you use factory settings or your own Windows installation. Normally after using Toshiba recovery disk you dont have to install any Toshiba tools anymore. Everything is preinstalled on your notebook.

P965 Neo2 V2.1 and E8400 (E0 stepping) not working

Similar Messages

Maybe you are looking for