P965 Platinum and all those beeps I don`t need

All those beeps counting my 4-5 USB units at boot. I find this very annoying. Is there a way to get rid of it? At work there was a unit starting to beep a lot, but functioned perfectly still. So I cut the wires to the speaker. Do I have to do the same here
Cheers,

Oh I know quite a lot about shorts and such...just forgot that I could pull the plug on the MB. But after building around 20 PC`s in my "lifetime" with data, I am used to *not* do this, as normally beeps come from BIOS and not USB devices. And this is confusing, right? For an "oldtimer" like me. This is a thing I do *not* like about MSI motherboards...it is totally nonsense for a normal user to hear those beeps.
Cheers,

Similar Messages

P965 Platinum and E6600 won't go to 3GHz

Hello,
I have a MSI P965 Platinum and a E6600. Currently I have two sticks of Corsair Value Select 1GB PC-5300 RAM, rated at 667Mhz 5-5-5-15.
The E6600's stock is 2.4GHz, and I want to go to 3GHz. This should be dead simple - not only can the E6600 usually clock much higher, but 3GHz will only require a 333Mhz FSB (9 x 333), which means my RAM doesn't have to be overclocked at all since it is rated for 667MHz DDR2. I should be able to obtain 3GHz with a nice comfortable 1:1 FSB:RAM ratio without stressing the Corsair Value ram beyond specifications.
However, it just won't work. I seem to be having RAM instabilities at 667MHz 5-5-5-15 and 333Mhz FSB. The reason I say RAM is because Memtest86 freezes, and SuperPi has a 'not exact in round' error in 16M and 32M - which apparently means there is a problem with memory stability. Now, I know this sounds like the RAM is faulty, but I don't think it is, because when I run stock 266MHz FSB, the system is fine at 4:5 divider to make the RAM 667Mhz. It's only when I increase the FSB (and not the RAM at all) does the system become unstable. At 266MHz FSB and 667MHz RAM, my system will pass any stress test, but not at 333Mhz FSB and 667Mhz RAM.
I've upped the CPU voltage 3 notches to around 1.350 or so under load. My ram is at 1.9v, although I tried 1.95v too. I didn't touch the chipset voltage (should I?). My temperatures seem ok - I'm only using the stock Intel cooler, but it should be able to handle 3GHz fine. It hovers around 48c idle, 60c load according to Everest Ultimate (before it crashes in SuperPi), so it doesn't appear to be overheating while overclocked. Not great tempts but acceptable.
However, there are two things I've noticed:
- In the BIOS, if I select CAS to be 5 or 6, CPUZ still reports my ram at CAS3 (which my RAM can't do at 667Mhz), or 3-5-5-15. However if I select CAS4, it reports CAS4 properly (still unstable though), or 4-5-5-15. This is only a problem when I overclock the FSB - at stock FSB, the CAS timings are reported correctly. It could be an issue with CPUZ, but I doubt it. If there is a bug with the P965 Platinum not setting the CAS right when overclocking, this might explain why I'm having RAM stability issues even though I'm not overclocking the RAM - i.e. because the board is not using the right CAS setting. Is this a known bug? Also, I tried Auto SPD but it tried to use 4-4-4-12 at 667MHz (again, which this RAM won't do).
- When I run 333Mhz FSB and 667MHz RAM, the POST shows some sort of error message about the board not supporting CPU's with a 267Mhz FSB or something (which is weird, because 266Mhz is the stock speed *shrug*), and that it's resetting it. Sorry I can't recall the exact error off hand, but I can try the overclock again and provide it later on if needed. Anyway, despite the error message, the overclock still applies - it will boot into Vista 64-bit at 3Ghz, it just won't pass any stress test.
Is it possible a BIOS update could help me? I run V1.4, and even though I know there is a V1.8 now, no newer version mentions anything about fixing overclocking issues. I don't like to update my BIOS unless necessary (and I don't even have a floppy drive anyway, would need to figure out how to do it via USB).
Thanks for any help. I'm certain my RAM isn't faulty and I'm certain my CPU should be able to reach 3Ghz surely. I'm also pretty sure heat isn't an issue. I think maybe the board is trying to force CAS3 when FSB overclocking or something? That's my guess anyway.

Thanks for the reply!
Sorry, I should have mentioned I was definitely achieving 1:1 - I recall the confusion over why my RAM was trying to be 800+MHz at 667 and then I realized 533 actually meant 1:1, 667 4:5 etc, so I am definitely running at 533/1:1. I doubt this RAM would even post at 800+ MHz.
So updating the BIOS may help? Ok thanks, I guess I will update then. I don't see it in the "fix" list though on the site. Is there a way I can get a *full* fix/enhancement list for 1.5, 1.6, 1.7 and 1.8 so I know exactly what I'm fixing going from 1.4 to 1.8?
Also, does MSI support LiveUpdate BIOS in Windows Vista 64 yet? And if not, is there an official way to update via a USB stick? (no FDD here).

P965 Platinum and XP hell - found a way

Hi guys,
I had ugly startup problems with the P965 Platinum and a Samsung Spinpoint SATAII HDD. So I want to share with you how I finally got there. I tried for a whole day to install XP as I wanted a dual boot with Vista. Trying XP Home OEM did not work, I got those blue screens we have seen in here. I tried everything, but to no avail. Two short beeps during startup also confused me, but forget about those for now. Well after hours of frustration I installed Vista. It worked! And told me that my Corsair RAM was probably OK, as well as my HDD. Then I had a drink too much and went to bed.
Today I slipstreamed XP with Service Pack 2, and managed to make a bootable CD. So now I got XP Home SP2. Tried again, and this time I got past blue screens...but when XP came to the first reboot...arghh no HDD. Today I was actually going to RMA the whole crap, but got a tip from the vendor.
On the MSI driver CD there is a IDE folder, with a "floppy" containing the AHCI ICH8 drivers. I read the readme and moved the files to a floppy, then put the floppy into the drive. Then I went into the BIOS and set SATA to AHCI. Started the install, pressed F6 and loaded the drivers from the floppy. I selected ICH8 AHCI, and XP was happy. During the installation it read the floppy once more and obviously recognized stuff. So here I am, up and running. Rock steady.
I think both MSI and vendors should inform us better about such.
I still got those two short beeps at startup, three if the USB CDRom is on. Can anyone please explain those beeps to me?
Cheers,

Glad you found your way out of "hell". The problems that threw themselves in your way are well known to many P965 Plat. users in this forum. It is good to see that you were able to solve them.
Quote
I still got those two short beeps at startup, three if the USB CDRom is on. Can anyone please explain those beeps to me?
Usually it is one beep for each USB-device attached.

For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one.

For some reason, even though I have advanced features checked, the menu with green screen and all those isn't popping up when I drag the video on top of another one. Help?

Hi
I would trash - iMovie pref file - and re-try - sounds like this got faulty.
• Delete iMovie pref. file. iMovie pref. file resides.
Mac Hard Disk (start-up HD) / Users / "Your account" / Library / Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
com.apple.iMovie9.plist
com.apple.iMovieApp.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
If You run Mac OS X.7 or more - then the Library in the User-account folder is invisibly and need to be set to be viewable. IT IS NOT in the Library on Root level (when opening MacintoshHD - first window = root level)
( It can be done like this: Open Terminal, then enter:
chflags nohidden ~/Library (exactly like this - space included)
Press return, then restart, and it will always be visible until the next major update, when you do the same thing again. )
Yours Bengt W

P965 Platinum and Realtek RTL8111B problem

I have a dual boot setup on my computer: Windows XP and Fedora 7 Linux.
After booting Windows XP I will have to COMPLETELY UNPLUG the power supply from my computer before booting to Fedora 7 Linux. The reason: If I simply reboot or turn off the computer (simply turning off does not remove the power from the mainboard), then the Realtek RTL8111B onboard LAN is left in a state which prevents Fedora 7 Linux from being able to use the LAN. Fedora simply reports the LAN is not available. The solution, which I find unacceptable, is to completely turn off the Realtek RTL8111B on the P965 Platinum and use an old Realtek 8129 PCI network board.
A better solution would be for the MSI BIOS to reset all of the Realtek RTL8111B LAN chipset's bits to a valid state so that Fedora 7 Linux would be able to properly recognize and use the onboard LAN.
Again, if I COMPLETELY UNPLUG my computer's power supply Fedora 7 Linux always finds and uses the onboard LAN. It is only after using Windows XP and rebooting to Fedora 7 Linux without completely unplugging the power supply first that there is a problem. This would seem to indicate the MSI BIOS is not resetting the Realtek RTL8111B onboard LAN chipset to a clean state when it initializes the system upon booting.
I am using MSI P965 Platinum BIOS version 1.4
John

Uhm, I'm having exactly the same issue under linux.
The router's led will stay off and it looks like there was no network cable connected (Realtek Ethernet controllers are insmod'ed and everything looks fine).
The only thing I haven't tried is unplugging the power supply's cable ... weird.
I'm also upset about this problem >:(
MSI P965 Platinum - BIOS v1.4

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

P965 Platinum Limited Start Up Beeps/USB problem

P965 Platinum Limited Edition
I have 5 USB devices plugged into my PC: my Printer and Webcam in the USB Ports next to the Lan Jack, my Mouse and Keyboard in the USB Port below those, and my microphone in the D-bracket 2 Connecter USB Port (JDB1).
With just the keyboard and mouse plugged in, I get the 2 (high) beeps at startup. With the two cables plugged into the port next to the Lan Jack, I get 2 low and 2 high beeps. With the other cable plugged into the D-Bracket port, I get 2 low, 2 high, and 1 low beep. You can see the pattern there. If I pull out the two cables next to the Lan Jack and leave in the one in the D-Bracket port, I get 2 high and 1 low beep.
Anyone have any idea what any of this means? (without listing post beep codes tables, I've been there, done that)

I stumbled across something online that made it sound like this was standard behavior for MSI boards? Basically announcing USB connections. My last two MSI boards did not do this, and I'd really like to make sure I don't have something else going on.

Do you REALLY need Space Designer and all those extra plugins/?

My quest to for answers to determine what machine (iMac or Mac Pro) to purchase for running Logic keeps producing more questions. There is so much talk in this forum about using Space Designers and other effects and plug ins (and all sorts of other hardware or software) additional to Logic. Is there something lacking in Logic's effects that necessitates Space Designers etc. or is this mostly a matter of preference, people looking for more precise/ extensive types of effects? I was hoping to utilize Logic for most of my drum, bass and synth sounds, most if not all of my reverbs and effects, and all of my mixing and mastering needs. I'd like to hear from people doing it this way-- using mostly Logic's sounds, effects and capabiliters, and if they think they are sufficient. For those who go with additional effects/plug ins, I'd like to know why -- do you feel Logic's effects are inadequate, or do you just prefer the sound of the addition plug ins?

in terms of what you get to start creating music with right off the bat, logic pro really is the most complete offer out there. it's basically like buying the equivalent of a sequencer, a mixer, a multitrack recorder, a rack of synths, samplers and drum machines, and a rack of effects, all at the same time.
the stuff it comes with right in the box varies from perfectly usable to world-class in terms of quality and creative potential.
you'll have your work cut out for you just getting up to speed on all the tools in logic in the first instance.. I don't think it's the best idea to start deciding about what 3rd party stuff you might want until you start getting your head around the gear in logic first. unless you have some specific plug ins or synths in mind that you're already familiar with and really want, get into logic first and then later go shopping for extra stuff that suits your tastes and the music that you make.
it's actually quite hilarious that in this day and age, you can easily buy, download and install some of the best sounding instruments and effects available anywhere, all in the space of a few minutes, with your trusty credit card. I can't tell you how much I like the fact that I never have to set foot in a music gear store hardly ever anymore. no more having to deal with incompetent (and stoned) frustrated guitar heros trying to sell me some rubbish from alesis that is on sale. not to mention the fact that since things went all plug-in, you basically get to chop a zero off the end of the price of what things used to cost.
apart from, uh, global warming, these are great times..

P965 Platinum and Vista x64 RAID config?

Ok, I have looked all over this forum for Vista x64 issues. Nothing even comes close to my problem. When I load Windows Vista Ultimate x64 Edition onto a clean SATAII drive (single non-RAID drive) I have no problems what-so-ever.
Now here is when it really gets weird. When I run install on a RAID array (2 SATAII Seagate 160GB drives) I see issues in the install. First thing I see is it corrupts the data on the first drive. This causes a blue screen at restart. When I go into the RAID config (ctrl+I) I see the first drive has errors. The only thing I can do is delete the RAID and start over.
When I reinstall Win XP Pro X64 I have no problems at all. I have downloaded the latest drivers from the downloads section and I have tried the newer Intel drivers. Non work!
Computer info:
CPU: Intel 3.4GHz Pentium D x64
MB: MSI P965 Platinum
Storage: 2x Seagate 160GB SATAII
RAID: Intel ICH7R/ICH8R SATA RAID driver 2006-08-29 (and have tried the newer driver from Intel)
If you need more just ask!
Oh yeah, I looked at the specs sheet for the P965. They need to remove the NEC 3550 from the "OK" list since it does not Wright period or READ at install. I went through a big deal with MSI about this and they still have not removed it.

Well sh**! I borrowed a friends Vista x86 and found it to also have the same issue. Would not even load the "Choose Drive" screen or allow me to even install the RAID drivers.
Man when a board gets Vista approved is must not take much. I have had compatibility issues with this board since day one. I think maybe it is time to through it away. What a shame since it is only a few months old.

I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

I really appreciate all your help. Today I spent some time on the problem. First I purchased any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

How much is actually a $0.99 app in RM? including the tax and all those..

I jusy bought some apps from iTunes. Just want to confirm how much is actually a $0.99 apps in RM??

"if it sounds good it is good"
I do not disagree with what has been said but personally I do not use this above statement as the "final say" in my work. By definition it is only as true as your monitoring - and your ears! Your ears can get tired and mislead you. What sounds great in the studio can be a nasty surprise elsewhere (or just the following morning!). You obviously cannot eq anything without listening and your ears obviously lead what you do with a mix.
All I'm saying is that as you get experienced you will also do what seems right to your head as well as to your ears. If I have to eq a vocal by 15dB I know it will likely sound "eq'd" and unnatural. That might be what I want. that might be what "sounds good" but if I'm trying to achieve a natural sound I might wonder why I need to apply such gain and consider alternative solutions.
I think the fact you have asked this question demonstrates you are on the right lines with how you are working. I'm an advocate of cautious eq. never twiddle knobs (virtual or otherwise) randomly until "it sounds good". Sit back, listen, think about what you need to do and then try it.
Don't forget about cutting as well as boosting. Indeed most folk find that reducing frequency bands rather than boosting tends towards a more natural result - so if you want something to have more "middle" pull back the "top" and "bottom".
If I'm struggling with a mix it is nearly always due to bad or excessive eq. It is rarely the other way round.

P965 Platinum and E6700 CPU Core v ?

Just a question.
What is the default CPU Core V on the P965 Platinum board when you just unpack it first time ?
I just want to know because i just installed my board directly with my new E6700 CPU on without checking the CPU core v first.
I never touched it, but i'm afraid its wrong. Maybe i have to chance it my self for the right setting.
So my question is really. Is the default CPU core v on the P965 Platinum alright for a Core 2 Duo E6700 CPU or should it be chanced
to the CPU the user are using with the board.
Thx

1.265V for mine...

Find My iPhone. Offer service to 3GS and 3G customers. I don't need MobilMe

The "Find My iPhone" app is another ploy/motivation for the consumer to buy new products. What if said consumers are in 2-year plans and haven't the need for MobileMe but want the security of knowing they can locate their phone they payed good money for.
Is it obvious I am one of these people? Make the app $9.99, fine. Just don't make me pay for something I don't need. Your loyal Mac customers have spoken.

Though it is hosted on an apple.com site. I belong to logitech, vudu, and garmin forums too and tech support from those companies chime in all the time. It is pretty cool and shows an added level of commitment. I guess you don't need to do that when you are the top dog.

My MacBook Pro is always over heating. I've tried SMC and all those fan setting programs but they don't do anything. Can someone tell me how to stop this?

This is becoming too much. I'll have Google Chrome open and nothing else yet it still reaches 70 to 85 degrees celsius. I've tried everything but nothing works. None of these forums or videos are helping. Does anyone know what could be causing this? And how can i stop this? I'd appreciate it

Take the computer to an Apple store or an AASP. Whichever is more convenient for you.

P965 Platinum and Crossfire

OK, if this has already been posted, I sure can't find it with the search... So..
I have a system running the 965 Platinum, 6300 CPU, and a single ATI X1600 pro video card (xp64 if it matters).. I can't seem to find a solid answer as to whether I can run a second X1600 pro on this board in Crossfire mode...
Anybody know for sure?
Thanks in advance

Quote from: CRCs_Reality on 14-December-06, 10:02:10
Sorry, didn't mean to come off like a jerk It's just that before I posted, I had already read all I could find.. I was hoping there was someone here who had tried it and could let me know if it worked or not...
Some of what I'm reading implies that you need a newer card (like the X1950 or such) to work crossfire on the P965, but then other stuff sounds like the X1600 would work.. I'd just like to know for sure before I drop cash on the card.
You just need a card that doesn't use the external dongle of early Cross-Fire (that big white thing outside the chassis) IIRC... I can't remember wherever the X1600 uses it or not, depends on how new the card is
Best regards

P965 Platinum and all those beeps I don`t need

Similar Messages

Maybe you are looking for