P990 yes or no?

Now I am confused. I see this device supports flash lite as
said on Adobe site. Also, it says it comes with flash lite
preinstalled.
I have just retrned from service shop where I got my P990
updated and no flash lite player on board.
I've tryed updating with sony program and it says there is no
update available.
Does anyone have player installed on this device and please
let me know how ?

This is not yet supported by Adobe, and is not listed.
http://www.adobe.com/devnet/devices/sony_ericsson.html
Currently Sony Ericsson is largely supporting its Walkman
line of phones using proprietary OSE operating system. Flash Lite
is not yet developed for UIQ3 operating system.

Similar Messages

How can I display True/False in my dropdownlist as "Yes" and "No"?

Hi All,
I want to bind a dropdownlist to a boolean value (so it's either true or false). I'm particularly interested in using two-way binding to when the user changes from "yes" to "no" the boolean value automatically changes from "true" to "false." But, I want the user to see "yes" and "no" as the options, rather than "true" and "false".
How can I display "yes" and "no" and still take advantage of binding? Or can I not use binding in this circumstance?
-Josh

Solution 1:
In order to display Yes/No for True/False, you may specify labelFunction for the dropdownList.
In MXML:
<s:DropDownList labelFunction="myLabelFunction" />
In actionscript:
private var arr:ArrayCollection = new ArrayCollection(["true","false"]);
            private function mylabelFunction(item:Object):String
                if(item.toString() == "true")
                    return "yes";
                else return "No";
OR
Solution2:
may be u can try making an array collection like
private var arr:ArrayCollection = new ArrayCollection([{label:"yes",value:"true"},{label:"no",value:"false"}]);
and specify labelField for the dropdownList like
<s:DropDownList labelField="label" dataProvider="{arr}" />

Is it possible to install Windows 8 through BootCamp on MAC OS Lion(v10.7.5) ? If yes then how cai do that ? Please suggest me something...

I am trying to install Windows 8 on my MacBook Pro(Late 2011) via BootCamp. I am using MAC OS Lion(v10.7.5).
So is it possible to do that ? If yes then how can i do that ?

Read the first item here http://support.apple.com/kb/HT1899

I had the Norton ID safe on a toolbar. I got a message saying that toolbar was unsafe. I clicked on yes to remove it. Now I want a new toolbar for it and I cannot find how to do that Please help?

I had a message come up that my Norton Identity Safe toolbar was corrupting my computer. There were more things than just that in the message. I told them to remove it by my clicking yes. I since have tried to download a new safer toolbar from Norton. I cannot get the toolbar back no matter what I do. I have tried everything. Going on Norton website has not helped. I do what they tell me to and I get nowhere. Please help because there was a lot of information on that and it helped with passwords to different websites that I visited.

I called Apple Support and they walked me through it. They told me to basically copy and paste my music to the external hard drive. (I think.) Or maybe it was they had me transfer a folder to the EHD. I don't exactally remember it was a few years back. But I tried to plug in the EHD before starting and...nothing. Still says same thing, "locate file."

If statement to put "Yes" or "No" in a table cell on another page

Hello I have tried to find a solution to this and I just can't figure it out. I have gone through all of the messages and tried the examples and no go. Please help, thanks.
THIS IS WHERE THE RADIO BUTTON IS:
----- form1.BorrowerInput.OtherPaymentsGroup.CurrentlyListed::calculate: - (FormCalc, client) ------
----- form1.BorrowerInput.OtherPaymentsGroup.CurrentlyListed.Yes::calculate: - (FormCalc, client) --
----- form1.BorrowerInput.OtherPaymentsGroup.CurrentlyListed.No::calculate: - (FormCalc, client) ---
THIS IS WHERE THE TEXT FIELD IN THE TABLE ON ANOTHER PAGE IS LOCATED
----- form1.#subform[5].Table1.Row3.ListedYesNo::calculate: - (FormCalc, client) -------------------
I am using the following if statemnet:
if (this.rawValue == 1) then
form1.#subform[5].Table1.Row3.ListedYesNo.rawValue = "Yes";
elseif (this.rawValue == 2) then
form1.#subform[5].Table1.Row3.ListedYesNo.rawValue = "No";
endif
When I put it in:
----- form1.BorrowerInput.OtherPaymentsGroup.CurrentlyListed::calculate: - (FormCalc, client) ------
I get the following error when I click the button:
"You are not allowed to modify this field"
I am totally lost on this, where would the script go or is it even right? Thanks for the help.

If you have rights to modify tabular model then, you can create a measure in your Tabular model which returns previous week and then use this measure in Pivot Table.
Thanks,
Sagar K
(Blog: http://datamazik.blogspot.in/)

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help

HELP NEEDED!! I bought a brand new mac air 11 inch a month ago, and for three days now I can't switch it on.when I do, i can hear the machine is on, but nothing else happens. (yes it is charged). please help.
I bought it in South Africa and I am currently in Israel.

thank you for the response.its not working, tried that. i can switch the machine on and off, can hear the machine when i hold it to my ear. but nothing works, not the screen, not the sound, nothing.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

When I set my home page and restart Firefox, it reverts to iMesh, an inadequate search engine. How do I get it to retain the home page I set? I said yes when it asked.

I go to Google, drag it to the home page icon and then acknowledge by clicking yes. When I restart Frfirefox it goes back to imesh.

I go to Google, drag it to the home page icon and then acknowledge by clicking yes. When I restart Frfirefox it goes back to imesh.

When Updating to IOS4 Do Not Say Yes to Udpate Changes to Settings

I updated my iPhone 3g to IOS4 on release date. OK You can stop laughing at me know, I got screwed over but I was lucky.
I couldn't get the OS to install using the update so I did the work around and downloaded the OS into iTunes and did a backup and then a restore. I had read a couple of threads that said this would work a lot faster than doing the update. I had waited nearly three hours for the update to finish so I figured it was the combination of my creaky old PC, iTunes and one of the apps on my phone so I tried the restore instead of update trick. It actually worked and only took about 30 minutes start to finish.
BUT when it was done I got a dialog box telling me that I had changed my settings and did I want to apply this change to my phone <YES> or <NO>? Without thinking about it I clicked yes and my phone did another sync. I lost my address book, email and text messages all in one fell swoop. Can you spell panic and nausea? I thought you could.
I was all over the web looking for ways to restore my stuff. I tried another sync because the last one I did before installing the new OS should have still been there...No Luck.
I tried everything I could think of and nothing worked. I wasn't too worried about my email, because of course it was still out on the web (Gmail Rocks!!)
Then it occurred to me, I had been using Gmail and GSync. I set up a new G-Sync account on my phone and set it to running. It took about 24 hours total, but all of my email, contacts and text messages restored themselves to my phone wirelessly.
So I strongly recommend that you do not apply changes to your phone when you do the IOS4 update. At least not the first time around. I also do not recommend using the restore in place of update workaround. Just let the update run (and run and run and run and, well you get it)until it finishes. You should get a clean install and a total restore of your music, contacts, apps, email, etc. I have no idea why an update on an 8 Gb iPhone needs to take hours, but apparently it just does.
So to sum up:
If updating to IOS4 use the update in iTunes not restore
At the end of the update DO NOT apply changes to settings
DO use gmail and G-Sync or another email that backs up your address book to the web.

Fixed it......
The problem was my Apps library in iTunes was not populated with the apps on my phone after the update of iTunes and iOS4. Therefore, that is why I "lost" them visually. Now, had I gone and hit "Apply" I would have been screwed, since nothing was in my iTunes App library.....Sneaky.....
In iTunes, File>"Transfer Purchases from iPhone"
This populates the iTunes App library with the apps on your device. It will take a few minutes, but all of the apps will now show up when you go back and try to sync the iPhone.
Screenshot of Success!
http://i55.photobucket.com/albums/g134/leonardrock/Screenshot3.png
Nice, I'm not stupid.
Thanks for the chime-ins everybody!

[Intel] Did you OC your P4 2.8 Northwood/Prescott on 865PE-NEO2-LS? Yes=post here plz!

I'm still looking for some starting reference points for anyone that might have successfully overclocked their P4 2.8Ghz CPU on an 865PE-NEO2-LS board, especially the Northwood. If you were able to successfully accomplish this, please post your specs here. So far (further testing is needed to confirm stability), here is only what I've got:
I'm also open to any further ideas/suggestions if you would like to offer...
Configure SDRAM Timing by SPD   Disabled
CAS# Latency   3
RAS# Precharge   4
RAS# to CAS# Delay   4
Precharge Delay   8
Burst Length   8
AGP Aperture Size   128
FREQUENCY/VOLTAGE
Performance Mode (slow, fast, turbo, Ultra Turbo)   SLOW
DRAM Frequency   AUTO
Adjust CPU Bus Clock (Mhz)   222
DDR Clock (Mhz)   444
Adjust AGP/PCI Clock (Mhz)   66.66/33.33
CPU Vcore Adjust   Yes
CPU Vcore   1.5375
DDR Power Voltage   2.7500
AGP Power Voltage   1.6000
SiSoftware Sandra Prof. 2005 System Info
Front Side Bus Speed (4x)/Memory Bus Speed (2x)   222
Front Side Bus Data Rate (FSB Speed x4)   888
Memory Bus Speed (FSB Speed x2)   444
CPU SPEED (GHz with 14x multiplier)   3.11
As a point of reference (yet again), here is my baseline system specs:
ADVANCED CHIPSET FEATURES
DRAM Timing Setting…
Configure SDRAM Timing by SPD Enabled
CAS# Latency 2.5 Clocks
RAS# Precharge 2 Clocks
RAS# to CAS# Delay 3 Clocks
Precharge Delay 5 Clocks
Burst Length 8
AGP Aperture Size 128
FREQUENCY/VOLTAGE
Performance Mode
(slow, fast, turbo, Ultra Turbo)TURBO
CPU Ratio Selection Locked
DRAM Frequency 400 Mhz
Spread Spectrum Disabled
Adjust CPU Bus Clock (Mhz) 200
DDR Clock (Mhz) 400
Adjust AGP/PCI Clock (Mhz) 66.66/33.33
CPU Vcore Adjust No
CPU Vcore 1.5250V
DDR Power Voltage 2.65V
AGP Power Voltage 1.50V
SiSoftware Sandra Prof. 2005 System Info
Front Side Bus Speed ( 4 x ) 203
Front Side Bus Data Rate (203x4) 812
Memory Bus Speed (2 x) 203
Memory Bus Speed (203x2) 406
CPU SPEED (GHz with 14x multiplier) 2.84
865PE-NEO2-LS (601-6728-020)
AMI BIOS version 2.3 (7-16-2004)
P4 Northwood, Socket 478, 2.8 Ghz/800Mhz FSB HT Enabled
4 DIMMS (256MBx4)=1GB KingMax PC3200 DDR400, Model # MPXB62D-38KT3R-PEA Speed PC3200
PowMAX PS LP-8800D, 400 watt, max load +3.3@28A,+5@30A,+12@25A,[email protected],[email protected],+5vsb@2A, 70% min@full load
INTEL 865 .INF Drivers (6.0.1.1002 5/7/2004)
Main: Western Digital Raptor, 10K rpm, 36GB
2nd: Maxtor ATA133 7200rpm 120GB
CD-RW: Lite-On 52x32x52
BFG Tech GeForce 6800 GT OC 256MB Graphics Card
SoundBlaster Audigy 2

Thanks guys for the replies. Yes, you are right, I was hoping specifically for the 865PE-NEO2-LS board, and see no responses. At this point, hopefully my 3.4 Northwood should be here today or tomorrow. On this board, I just could not get past 3.1 Ghz with my 2.8, and it seems as soon as I started creeping towards the FSB of 230, things really went wacky/unstable. No matter if I raised the voltages, loosened memory timings, etc. But having said that, CONGRATS to you guys for getting your 2.8s juiced up - I wish I had better luck!
Obviously, my next question would be is how well does the 3.4 Ghz Northwood O/C - isn't the ceiling about 4Ghz?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective.

Updated to 4.4 and now my Bluetooth 'studders' when listening to music and a phone call. Yes I have reset the phone and removed the battery.

I just updated my Note 3 to 4.4.2. Since then when I listen to music or make a call on my Bluetooth my music and calls 'studders' and has some type of 'drop-outs' during the music and calls. This was not the case prior to the update.
Yes, I have power down the phone. Yes, I have removed the battery and restarted the phone. My Bluetooth headset is an LG 730. I tried listening to music on my other Bluetooth devices and they also 'studders' and has drop-outs during calls and music. I connected with a wired headset and the 'studdering' disappeared.
Is there a way to revert back to the previous 4.3 version of Android. I use my phone extensively for business and drive with it. The law for my state requires 'hands free' usage of my phone.

Unfortunately, I was forced to do a factory Reset. This wiped the device to a new state.
Afterwards all Blue-tooth, wi-fi and calls operated fine.
I would advise that you notify your customers that they would most likely have to do a Factory Reset once they update their device.
All contacts, pictures, data and applications were either lost or had to be reinstalled.
Laurence
(Removed)
Private info removed as required by the Verizon Wireless Terms of Service

When I start Firefox I get a menu box asking me to agree to let Firefox make changes to my computer. I click yes and the program opens and goes to my homepage. See Details below.

When I attempt to open Firefox from my desktop icon a menu box appears and backscreen grays out and I can't access anything else except this menu box. top of menu box says User Account Control. Next line says: Do you want to allow Firefox to make changes to this computer? I can click Yes (Firefox opens) No (menu box closes Firefox doesn't open) A link I can click says "change when these notifications appear" When I click it the menu box closes, Firefox doesn't open & link does not take me to where I can change my user account controls. Annoying, I just want Firefox to open directly to my home page like it did in prior versions.

Do a clean reinstall.
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
* Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....

Yes another user with problem with Apple Mobile Device Support, I am getting the error message: Service 'Apple Mobile Device'(Apple Mobile Device) failed to start. Vertify that you have sufficient privileges to start system service....I hit retry and it came up again. I hit ignore and it prompted me to hit finish so Itunes can open. I looked thru alot of these posts on here to try and resolve this problem myself but it's not working too well...I downloaded Itunes to my desktop so I can right click it with the program i downloaded called WinRAR. I extracted it and then went into the folder called Itunes64setup. I saw the file called AppleMobileDeviceSupport64 in there so I began to try and download it on it's own. Well that didn't work as I planned and got this error message:
Apple Mobile Device Support wasn't installed on your computer. The installer encountered errors before Apple Mobile Device Support could be configured. Your system has not been modified. To retry these operations at a later time,please run the installer again.
Well I tried to run it again and came up with the same message...I see that some people got great support to help them so I am hoping someone can help me as well. I know "b nor" is very qualfied and hopefully can help me! Please advise what I can do. Thank you

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

P990 yes or no?

Similar Messages

Maybe you are looking for