P9981 Keypad stopped working

Hi ive purchased Blackberry Porsche Design 9981 on June 16th ive used it over a month ago and ive started having some keypad problems with it. Ive notified the people who sold it to me, but after a month later it totally stopped working. So ive sent my blackberry to a HK Blackberry office, Beijing Blackberry office. They still couldnt get my phone fixed. Back Button, Answer Button, End Call Buttons are stopped working. So now the company that sold it to me they are saying they cover a technical damage. Who do i contact? What do i do with this **bleep** phone?

Hi and Welcome to the Community...and apologies for the delay!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever. RIM provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user.
From what you describe, I think that your original place of purchase is your warranty provider, and is now claiming damage by you. But, your escalation path is not here, in these forums. Rather, it is through your place of purchase...even if they may now be denying you service. You have no free path by which to bypass them.
Beyond that, you are left to governmental consumer protection agencies and the like, but I've no idea what those would be for your specific case.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • SIP 6945 Keypad stops working after Connected state

    I have a lot of 6945s/3905s/6961s all working fine. 
    However I have 1 6945 phone that after dialing a number the Keypad stops working.  So during the Connected state the keypad stop working.  Ring Out is fine.
    Any ideas? Bad hardware?
    6945 SIP
    9-3-3-2
    CallManager
    9.1.1.21018-1

    When reading my report, I forgot to mention how the external hard drive is formatted :
    Hard Drive FW/USB:
    Manufacturer: LaCie
    Model: 0x0
    GUID: 0xD04B78070AD64B
    Maximum Speed: Up to 400 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    Hard Drive FW/USB Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x110
    Product Revision Level:
    Sub-units:
    Hard Drive FW/USB SBP-LUN:
    Capacity: 298.09 GB
    Removable Media: Yes
    BSD Name: disk1
    Mac OS 9 Drivers: No
    Partition Map Type: APM (Apple Partition Map)
    S.M.A.R.T. status: Not Supported
    Volumes:
    Aristotle:
    Capacity: 297.97 GB
    Available: 164.85 GB
    Writable: Yes
    File System: Journaled HFS+
    BSD Name: disk1s3
    Mount Point: /Volumes/Aristotle
    Raf

  • The "D" on my iphone keypad stopped working. Should i return it to an Apple store?

    The "D" on my iphone keypad stopped working. Should i return it to an Apple store?

    No.  Follow the troubleshooting steps that are in the manual...restart, reset then restore if necessary.

  • LMP keypad stopped working through bluetooth, pls help

    LMP keypad stopped working, anyone know how to reconnect my wireless keypad to my MacBook's bluetooth? Batteries have been replaced and no luck.

    Right.
    Either it is 6280 or 6680 you should take it to a nokia care:
    Care points:
    UK
    http://www.nokia.co.uk/A4228006
    Europe:
    http://europe.nokia.com/A4388379
    Elsewhere:
    http://www.nokia.com and select your country.

  • E 65 Keypad stopped working,not locked

    Can anyone help. My keypad has stopped working and i cannot enter any numbers or characters.'

    Thanks I did that, went through and cleaned everything with pressurised air but still no luck. It still does not work.

  • Hopefully easy question: the number keypad stopped working!

    OK, this is a super-minor problem, but I'm hoping that means it's an easy one to fix!
    I normally rely on quickkeys or keyboard shortcuts, like in Logic when you just hit the "0" on the number keypad which takes you back to the beginning of the piece. Problem: it stopped working! Now when I hit the 0 I just get the penalty beep. I did trash my preferences earlier today, because I was having problems with a 3rd-party plugin. But I can't find a place in Preferences to enable the number keypad keys.
    Help!
    Kirby

    If you trash your prefs you automatically delete your Keycommands with it so you should save/export them first before trashing the prefs. Now open the Key command menue, enter "stop" in the little Spotlight menue and reassign the "0" to the command stop.

  • Pressing 'A' key to lock keypad stopped working

    Up until yesterday, I've always been able to lock my keypad (Blackberry 8520) by holding down the 'A' key. Yesterday it stopped working for no apparent reason and I was wondering if anyone could tell me how to get it working again.

    Rob,
    Yes, we upgraded our entire system...ER, Unity, IPCC, and CM.  IBM was contracted to do most of the work and I know they want to install some additional updates to get us to the most recent version of 8.6.  Here are the versions we are running right now:
    Cisco Unified Communication Manager (Call Manager):    
    8.6.2.20000-2
    Cisco   Unified Contact Centre Xpress (IPCC):            
    8.5.1.10000-37
    Cisco   Unity Connection (voicemail):                    
    8.6.2.20000-76
    Cisco   Emergency Responder:                            
    8.6.1.10000-11

  • My Logitech K750 numeric keypad stopped working after last update-numbers only

    After the last Mountain Lion update, the number on my numeric keypad will not function.  They work for my login, but then become inactive.  I have tested the system with an Apple keypad, same thing!  What happened?  Is there a keyboard setting that needs to be reset?

    Dianefromblaine,
    Thank you.  My K750 number pad stopped working on my iMac.  The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac.  I did a Safe Mode start, reset the SMC, and repaired the disk permissions.  The dongle was plugged into an USB Hub.  It is now plugged into the iMac USB port.  The keyboard has a 90% charge, but still does not work.  Then suddenly it started working again, but stopped after about one month. 
    I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys".  My number pad works again.
    Thanks.

  • My nokia 5700 keypad stopped working

    hi i have a nokia 5700 that the keypad suddenly stopped working and all the buttons exept the switch button that works please someone helps me before throwing the phone

    hi im mani u have software issue in your firmware version so go to www.nokia.com then download pc suite with software updater then check your product code its writen at back of your phone where your phome imei number then connect the usb data cable then search the phone and update your software during the update do not disconnect your phone otherewise your phone were damage after the update your software if phone is ok then use it otherewise u may contact to nokia care where r u from if you r in pakistan karachi the 1111(nokia)66542 ok byee reply me when your phone is ok
    silvi

  • Keypad stopped working and phone wont charge.

    hi , 
    I've just downloaded a new theme for my blackberry curve, and as soon as I rebooted the phone..
    the keypad didnt work anymore, except for the left alt button.. and also the phone won't charge the battery.
    I have reseted the phone by taking the battery out several times. 
    and also tried connecting my phone to blackberry desktop manager, but phone wouldn't connect.
    what should I do? I've only had my phoe for 2 months now!

    I too facing the same problem...sometimes it suddenly hangs while in a conversation. Trying to fix it, the keypad does respond. Help me fix this heck!

  • Iphone 4 Keypad stopped working

    The top row of keys don't respond and I can't enter the unlock code.

    A restart doesn't do it, at restore fails because the phone says it is locked and the backup cannot be done.  I will try a reset, but I assume that wipes all and I do have a current backup, but does that wipe the phone number?

  • C3 keypad not working!

     I have a nokia c3-00 set, suddenly it's keypad stops working. just if i hold, call dorp button, then it show the screen. i have very important contacts in it. I want that contacts. kindly advise me, is it a software problem or hardware?
    what am i suppose to do know!
    Best regards:
    Usama Nadeem

    How old is this device,have you tried to update it recently,check here http://nokia.com/nokiasuite , if not send to nokia care point or point of purchase ASAP.
    Keep us informed.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • N95 - keypad not working

    Hello,
    5-6 days ago I updated the software on my N95 using PC Suite. Everything was fine until 2-3 days ago when the keypad stopped working. When I pressed some button the phone went crazy and started opening random things. I didn't dropped it or get it wet. I tried removing the battery, removing the SIM card - nothing worked. The next day, all the sudden the phone was working again. The day after that the keypad stopped working again. Now it's either not working at all or it's opening random things by pressing some buttons or working normal for a while ...
    By the keypad I mean ALL the buttons (including the media keys on the side) except the ON/OFF button on the top (it's the only one working all the time).
    So, please tell me is this a software or hardware problem ?
    Plus, I'm really really tired of this phone. I've already paid about 150 Euro for repearing which were not because of my fault and now maybe I have to pay and wait even more .. This phone is nothing but trouble for me so far and it is the most expensive one I've buyed ...

    Well, I took it for repair and after a first look the guys said that the whole keypad must be changed. After a few days I recieved a call from them to tell me that it is not worth it to be repaired and it will be better just to buy a new one.
    We are talking about a pricey phone which never been dropped or got wet, but it was repaired a lot of times for defects. So, I will buy a new phone, but I doubt it if you can convince me to buy Nokia again ...

  • Keyboard Keypad not working

    iMac G5 rev.A OS 10.4.11, Original Apple Pro Keyboard
    I never noticed that the numerical keypad on the RH side of my keyboard was inoperative, in that I cannot use the keys to type the digits in any text, nor for entering numbers in an Excel spreadsheet cell.
    I never use it except to use the 12346789 keys to nudge the pointer. I always use, by habit I guess, the number keys above the letter keys.
    I checked the Finder’s Help and did not find any specific info about the numerical keypad. I thought that may be the Extended Keyboard that came with the computer, somehow had not been identified properly when I installed OS 10.4. Reading Finder’s help about that subject, it said to “Open Preferences, Click Keyboard and Mouse, Click Keyboard, Click the “Change Keyboard Type” button, and Follow the steps when the Keyboard Setup Assistant appears.”
    I have one problem: my Keyboard and Mouse Preference does not have a Change Keyboard Type button.
    Any suggestions as to how I can get the numerical keypad to work?
    jb

    Hi,
    This morning my numeric keypad quit working and
    I lost an hour trying to fix it
    (COUGH theft of my time).
    This article didn't come up in a Google search
    because this article doesn't use correct terminology.
    So, for Google's benefit, I'll add a few search terms here:
    numeric keypad stopped working
    numeric keypad doesn't work
    numeric keypad won't work
    numeric keypad quit working
    Mac OS X 10.3
    G3 G4 G5
    _Recommended Solutions_:
    1. Press the Option key 5 times to turn Mouse Keys off.
    2. Better yet, disable the feature so it can't get turned on again
    every time a book leans against the keyboard.
    Go into System Preferences,
    click Universal Access,
    click the Mouse tab (even though this is a keyboard problem),
    and uncheck the checkbox labeled "Press the option key five times to turn Mouse Keys on or off".
    Gotchas suck!
    Sincerely,
    J. E. Brown (mr.)
    Software Engineer and Tester
    Testing Pays!
    <Edited by Moderator: Please See Terms of Use for URL in Signature>
    Los Alamos, New Mexico USA
    +J. E. Brown has been a software engineer for over 20 years.+

  • The "enter" key on the numeric keypad of my external mac keyboard has stopped working. Help!

    The "enter" key on the numeric keypad of my external mac keyboard has stopped working with my Macbook pro.  If I plug the keyboard into any other computer, that entier key works fine. I'm using a standard Mac wired keyboard, & it's worked fine for 2 years now. Help!
    This is the keyboard I am using: http://store.apple.com/us/product/MB110LL/B/apple-keyboard-with-numeric-keypad
    Not sure what I might have accidentily done to disable the enter key. (The normal enter key works fine, just the one on the numeric keypad.)
    Thank you for your help.

    Hi there,
    Do you have any resolution to this problem in the end? Because it happened to me an exact same thing.
    Please share if you have found a solution to your problem. I also cannot think of what I did wrong to disable the Enter key.
    Best Regards,
    Jeffri

Maybe you are looking for

  • Cannot connect to https or encrypted sites (banks, pay-sites etc)

    Since two weeks I can no longer connect to most https sites. Some are very slow but finally show up after a minute or two (like finance.yahoo.com). One bank site (Interactive Brokers) allows me in, albeit very slowly but then they are only half funct

  • Display problem MBP 15(2.5GHz Intel Core 2 duo)

    i noticed about 2 weeks ago an intermitant issue when  i was using my MPB the display would suddenly lose resolution so it looked like there were many vertical lines.  text would become very jagged and difficult to read.  in excel, some of the cell/c

  • IOS7 bug: can't copy text when language isn't English

    I can't copy copy text from SMS messages or from Chrome (+other apps). When I press and hold on the screen, the app crashes after 1-2 seconds. My iPhone language is Hebrew. When setting the language to English, it doesn't crash and works fine. I have

  • Mac Monitor using windows tower?

    Is there a cable that I can hook my windows computer to my Mac so that I can use both computers on my mac screen? I have the newest version of leopard and Bought my mac about two months ago 20 inch with 2 gig of ram. thanks!

  • Still confused:  Should I shoot HD in 30p or 60i ?

    I know this has been discussed at length and I apologize if I missed it, but I'm not sure there was ever a consensus on the answer. With my Canon Vixia HV30, I have the option to choose 1080p30 instead of the 1080i60 default. Assuming I'll be process