PA - Creating customer specific infotypes
Hello experts,
How to create customer specific infotype in PA? i tried creating in PM01, but it is not getting reflected in PA30. is there any other method to create customer specific infotype? or do i have to copy from standard infotypes? If you can send me any document it will be really helpfull. my email id is [email protected]
Thanks and Regards,
Shilpa
Hi
would you mind forwarding the documents to me as well
my mail id is [email protected]
Thanks in advance
Regards,
RK
Similar Messages
-
How to create customer specific InfoTypes in CRM?
Hi folks,
we want to distribute customer specific InfoTypes from HR to CRM. Thus we have to create these InfoTypes in CRM. Does anyone know how to do so? In HR this is done with TA PM01 which does not exist in CRM.
Thanks!
MartinMartin,
Yes I think just using a BADI and storing in custom tables is the easiest approach in your case. However if these infotypes are employee data contained in personnel administration, then you should consider extending the Business Partner via the eewb. You would still then enhance the IDOC and then extend the data transfer to the new attributes in CRM.
If it is just organizational data attributes, then you can either do custom tables, or try to create new infotypes via manual configuration in the CRM system.
Take care,
Stephen -
Regarding Customer Specific Infotype
Hi Gurus,
I had created one ad-hoc query. When i run this query in SQ01. I selected one filed in customer specific infotype. then it shows that data is tooo long.
Can any body give the sollutions for this???
Regs,
BrahmaHi
Debugging is best option.
Manoj Shakya -
Change Pointers activation for customer specific Infotype
dear friends,
could you please let me know how to activate the change pointers for customer specific infotypes? Currently we are using message type HRMD_ABA.
regards,
jpAnand:
Unfurtunatly, not all the modification are registered in the log. For ei., You can track the systema status modification, the PR generation, etc. What fields change are you trying to modify?
Hope this help
Ezequiel -
How to create customer specific fields within PC 10.0?
Hello,
for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
Regards
Andre YujiDear Johannes,
We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
as well as RE_RHGRENZ4 to Set a new end date to the objects.
At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
Regards,
Karina Atonaidan -
Screenshots for this customer specific Infotypes
Hi,
Can any one send me the screen shots for following customer specific infotypes.
9002 Checklist
9003 Bond
9011 Cost of Recruitment
9025 Appraisal
Samriddhihttps://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
check this one creation of infotype
and according to this u customise ur coustmer speciofic infotype might be helpful -
Error: Create customer specific areas with services
Hi Experts,
I am facing problem while creating customer specific areas with services. We have a development for Appraisals and trying to make it work via ESS.
I have defined resource for area page, defined area, assigned area to an area group page.
Still the Area is not displaying on Area page.
Please let me know as to where I have gone wrong.
Thanks!You need to create your workset, and check the URL in PCD of the Iview
-
PPCI Create customer PD infotype
Hello,
I tried to use TA PPCI to create a new customer infotype. I was ask to create entries in table T777D and TDCT. If I wanted to create a new dialog module (SE35) the system didn't allow that because TA SE35 is obsolet. But to test or use the infotype with TA PP01 or PPDM the system says there is no entry in table TDCT.
Could anybody explain to me, how to create new customer PD infotypes or how to create an entry in table TDCT.
Many thanks
Albrecht Friedrichowitzcheck this link:
http://help.sap.com/saphelp_erp60_sp/helpdata/DE/42/51c05a4a1211d182b80000e829fbfe/frameset.htm -
Creating customer specific deployment reqs.
Hi
Our supply network has a DC that is sourcing from a plant. The demand at the DC is at location-product-customer level in DP. We are releasing to SNP/PPDS with location as a descriptive characteristic. So far so good.
We want to run a SNP or PPDS planning runs so that the demand from DC is carried to the plant, a planned order at the plant as needed and then deploy that stock to DC in deployment run at the customer level.
What this means is at end of the planning runs, we want deployment reqs. that are specific to each customer and not one single qty. for all customers.
Example:
We have DC1 where we have material M1 and 3 customers C1, C2 and C3
Forecast in DP:
M1, DC1, C1 has 100 CAR
M1, DC1, C2 has 150 CAR
M1, DC1, C3 has 200 CAR
The forecast is released to SNP/PPDS at the material-location-customer level.
Desired end result:
deployment req1: 100 CAR going to DC1 for M1 and C1
deployment req2: 150 CAR going to DC1 for M1 and C2
deployment req3: 200 CAR going to DC1 for M1 and C3
Is this possible in APO using either SNP or PPDS using heuristics/CTM or optimizer?HI Marius
Thanks for taking time answer.
What did you mean by creating a model? you mean in /sapapo/mvm? or a different CTM run for each of the three and specify only Plant, DC, C combination in each?
I am afraid creating separate models isn't an option as this would not provide an overall view and not an efficient option from system usage point of view.
If I go about creating separate CTM runs, the system would delete the previous orders and create a cumulative order qty.
I am thinking may be try checking the indicator "fix Production" and "fix stock transfers" in SNP2 tab and tell CTM not to touch fixed orders, that way the system creates 3 different orders form three runs? you think this may work? I will test out any way...but just asking... -
How to create customer specific BEx3.5 workbook using BEx7.00??
Dear guys,
we are faced with the following situation:
Customer uses MS Office2003 and BI-AddOn7.x (Patch 3). We have to provide him workbooks but we use Office 2010 and BI-AddOn7.x (Patch 3). If we now provide the workbook our customer cannot open the workbook.
Trying to save the workbook locally as XLS-file works but to open it on customer side fails.
Although the general workbook setting "use XLS format" was activated there seems to be a check what Office-version was used to create the workbook.
Is there any trick?
Regards,
PeterHi Frederic
yes indeed I tried this option. But w/o any effect. We committed that creation of workbook would better be done in his own environment saving time.
Thanks for your help.
Regards,
Peter -
Customer specific operation in RPTIME01
Hi all,
We are looking for a cookbook or general instructions for creating customer specific operations in report RPTIME01.
Any help will be appriciated.
Thank you,
DavidHi David,
While running the Time Eval with your schema, PL select the Program Option 'Display Log' and check whta the log says. It should say where/what the error is.. Are you getting the 'No data selected' message?
Good Luck,
Suresh Datti -
Customer specific invoice texts
Hi
Does anyone have any suggestions on where to create customer specific texts for invoice - the client needs texts assigned to a specific customer shown in the invoice.
Thx
RHi!
you have to go VOTXN, and there:
maintain the text id (text types) on the customer (for the general view- the central texts, or on the sales area level- S&D texts); then you have to maintain the text on the billng header.
Then you have to maintain the text procedure that you use on the specific customer account group and billing type.
then you have to maintain the access sequence, with KNVV or KNA1 object, and the VBRK object.
if you have not added the texts to the already existing procedures, you need to do it now, assigning the new text procedure to the customer account group and billing type.
IMPORTANT- on the access sequence level you can decide if the particular text is coming from SP, SH, PY, BP etc.
if you want to have this text printing on the invoice, you have to provide the text ID from the billing level to someone who is dealing with the outputs, and ask this person to pull it on the printout.
cheers,
Bea -
Customer specific Inspection Plan
hi experts,
Can any one help to create customer specific inspection plan. Our client requirements as follows,
In Inspection plan based on Usage we can able to assign vendor wise inspection plan for single material in material assignment, like that is it possible to assign customer name in inspection plan. so that we can choose the Inspection plan based on customer specification. any one can help me in the above requirement.
awaiting for your replies,
MuthamilDear Muthamil
There is no configuration setting required . A typical cusomter inspection plan can be given as
For a material X Suppose you have Customer A, B , C, D , E. Customer . A & B have the same specification c, D,& E has a another set of specification in this case :
QP01 > Material (X) / plant > Usage and status > material assignment > give the customer A. As you have mulitple customer ie B also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer B combination.
The give the operation details and in inspection characerisitc MIC details as you normaly give
For the next set again goto QP01 ( for customer CDE
QP01 > Give the same material X and Plant > Click on New entries > Usage and status > material assignment > give the customer C.
As you have mulitple customer D E, also with same specification then in material assignement input the same group counter in the below line of the material assignment along with /material and customer Dcombination and repeat the same for customer E
By doing this system should automacticaly pick up the customer specification when sale order of Customer E is used
hope this helps
Regards
Gajesh -
Customer specific field.........
hi,
1- How can i create customer specific fields for PROJ DEF. & WBS.
2- how it will come on the PS WBS or Proj. Def. ScreenHi,
You can create Customer Specifc field through Enhancement of Configuration. You need to go to transaction CMOD & define the enhancement. ABAPer will be required for this purpose.
Hope this will help you.
Regards,
Rakesh Pradhan -
How to change customer specific status of employee?
Hi All,
I would like to change the Customer Specific Status of employee.
In PA30/PA40, the customer specific status is in display mode.
How to do it.. Any transaction code?
Regards
PavanHi Pavan,
All three status indicators (customer defined, employment, special payment) can only be assigned at the time the action is created (cannot be changed thereafter).
Do the creation through :
SPRO : Personnel Management -> Personnel Administration -> Customizing Procedures -> Actions -> Create Customer-specific status.
Regards,
Dilek
Maybe you are looking for
-
How to modify a standard OAF page in version R12
Dear all, I have a requirement to modify a standard OAF page(can't implement by personalization),and my EBS version is R12,but i have not the source java code of the page,I try to decomplie the class file by a sofeware named 'YingSoft' , as the r12's
-
Hi Folks, I have designed custom screen for MB21 transaction which calls the standard screen. I want to pass some data from the custom screen to the standard screen but for that i need a user exit to do the same I tried get/set parameters but they wo
-
I d'like to create an image. I want for doing it to paste several images in rows and columns to compose only one bigger. If someone has got an idea can you help me please or if you don't understand me do you want more informations? thank you for your
-
Windows 8.1 does not launch ITunes when i plug my iPhone. Options Automatically sync when this iPhone is connected is checked and Prevent iPods, iPhones, and iPads from syncing automatically is UNchecked. I would like iTunes to launch automatically
-
Latest Photoshop CS5/CS5.1 Update, Aug 9, 2011
Is the latest security update (released Aug. 9, 2011) for Adobe Photoshop only available via manual download from Adobe? I tried the "check for updates" option in Bridge and Photoshop only to be told "your applications are up to date." Numerous vulne