PA Extractor

Hi experts:
Can someone guide me with best practices for creating Generic Datasource with PA (only ) extractor  ?
Is there any document available for the steps involved in setting up the PA function module(extractor) for GE(Generic datasource)?
Thanks very much....
Angie

Hi,
  As you have specified PA - I assume that it is HR - Personnel Administration.
Please check the following link for PA Business content,
http://help.sap.com/saphelp_bw32/helpdata/en/63/351e3c6a2fc036e10000000a114084/frameset.htm
Assign points to me if it is usefull.
Hope it helps
arun

Similar Messages

  • Extractor 0FC_BP_ITEMS - Business Partner Items Enhancement

    I'm looking at using 0FC_BP_ITEMS extractor to extract Open and cleared items. Has anyone worked on the enhancement of this extractor. If so what are the steps involved in enhancing this extractor?  Is it similar to the Full load extractor 0FC_CI_01 and 0FC_OP_01. Any help will be great.

    Hi,
    Please have alook in help.sap.com- Netweaver- BI Content-FICA.
    This is not same as those two datasources which you mentioned. This datasource will give you delta records.
    Regards,
    Asish

  • What is the best way, while creating Function Module based extractor

    Hi Friends,
    I am Sreekanth.
    I have created a Functio Module based Extractor,
    To fetch data from COPA tables.
    In this extracton 3 tables are getting involved.
    1) CE3OP01 2) CE4OP01 and 3) CE1OP01.
    Logic required is as follow:
    1) get data from CE3OP01 and for all entries of this data set,
    get data from CE4OP01 and CE1OP01 and finally send the data set to BW after few manupulations.
    I have implemented the whole logic and its working fine in DEVELOPMENT box where data volume is less.
    But the same code is timing out in Quality Box, due to huge volues of data.
    Below I am copying the code that i am using . Any body can suggest me how to proceed further so that my code works with huge volumes of data.
    Now I am getting the time out error while selection data from CE3IOP01 table itself.
    FUNCTION /ds1/c_bw_zds_copa_recon.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(I_REQUNR) TYPE  SRSC_S_IF_SIMPLE-REQUNR
    *"     VALUE(I_DSOURCE) TYPE  SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
    *"     VALUE(I_MAXSIZE) TYPE  SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
    *"     VALUE(I_INITFLAG) TYPE  SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
    *"     VALUE(I_READ_ONLY) TYPE  SRSC_S_IF_SIMPLE-READONLY OPTIONAL
    *"  TABLES
    *"      I_T_SELECT TYPE  SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
    *"      I_T_FIELDS TYPE  SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
    *"      E_T_DATA STRUCTURE  /DS1/FI_COPA_RECN OPTIONAL
    *"  EXCEPTIONS
    *"      NO_MORE_DATA
    *"      ERROR_PASSED_TO_MESS_HANDLER
                            PROGRAM INFORMATION                          *
    RIEF ID.......: N/A                                                  *
    PROGRAM.......: /DS1/C_BW_ZDS_COPA_RECON               
    PROGRAM FUNCTION: This Function Module Extracts Cost Center, Company *
    Code, and all Amount fields form CE3OP01 table and  sectaktbo       "
    *     Current profitability segment (CO-PA)                          *
         paobjnr     "     Profitability Segment Number (CO-PA)       *
         pasubnr     "     Profitability segment changes (CO-PA)      *
         bukrs            "     Company Code
         kndnr       "     Customer from CE4Op01 table.               *
    Segrigate one record from CE3Op01 into 93 based on Value fields.    *
    PROGRAM TYPE..Function Module                                        *
    DEV. CLASS..../DS1/MI_01                                             *
    LOGICAL DB.... N/A                                                   *
                   Conventions used in the Program                       *
    *     global variables      --> g_*                                    *
    *     local variables       --> l_*                                    *
    *     constants             --> c_*                                    *
    *     internal tables       --> t_*                                    *
    *     structures            --> x_*                                    *
    *     parameters            --> p_*                                    *
    *     select-options        --> s_*                                    *
    *     ranges                --> r_*                                    *
    *     workarea          --> w_*                                    *
    *     field symbol            --> fs_*                                   *
    Declaration for Interface: Selection criteria
      STATICS: s_s_if TYPE srsc_s_if_simple,
    Maximum number of lines for DB table
      ls_s_if TYPE srsc_s_if_simple, "Static Structure
    counter
              ls_counter_datapakid LIKE sy-tabix,"Static Counter
    cursor
              ls_cursor TYPE cursor,"Static Cursor.
              ls_cursor1 TYPE cursor."Static Cursor.
    *CONSTANTS
      CONSTANTS:  lc_datasource TYPE char14 VALUE 'ZDS_COPA_RECON',
                                                 " Data Source Name
                  lc_msgtype TYPE char1 VALUE 'E',  "message type
                  lc_msgcls  TYPE char2 VALUE 'R3', "message class
                  lc_msgnum  TYPE char3 VALUE '009',"Message Number.
                  lc_001 TYPE char3 VALUE '001',
                  lc_b0 TYPE char2 VALUE 'B0',
                  lc_10 TYPE char2 VALUE '10',
                  lc_01 TYPE char2 VALUE '01',
                  lc_02 TYPE char2 VALUE '02',
                  lc_1 TYPE sy-tabix VALUE 1.
    *Data Declaration.
      DATA: lt_ce3op01  TYPE STANDARD TABLE OF x_ce3op01,
            " Internal table for ce3op01
            lt_ce3op02  TYPE STANDARD TABLE OF x_ce3op01,
            lt_ce4op01  TYPE STANDARD TABLE OF x_ce4op01,
            " Internal table for ce4op01
            lw_ce3op01  TYPE x_ce3op01,
            " Work area for ce3op01
            lw_ce3op02  TYPE x_ce3op01,                         "MOD-002
            lw_ce4op01  TYPE x_ce4op01,
            " Work area for ce4op01
            lw_e_t_data TYPE /ds1/fi_copa_recn,
      " Work area for /ds1/fi_copa_recn.
    *CE1op01
      lt_ce1op01 TYPE STANDARD TABLE OF x_ce1op01,"Internaltable
      lw_ce1op01 TYPE x_ce1op01,"Work area for CE1op01.
    **CE1op01
      lt_fldlist TYPE STANDARD TABLE OF lx_fldlist, "fields list
      lw_fldlist TYPE lx_fldlist,"  FIELDS list work area
      lt_flnmval TYPE STANDARD TABLE OF lx_flnmval,"table for splitting
      lw_flnmval TYPE lx_flnmval,"work area for spilitting
      l_index TYPE i VALUE 1, "to keep track of index.
      l_len   TYPE i,
      l_s_no_recs   TYPE sy-tabix VALUE 99,
      l_s_loop_from        TYPE sy-tabix,     "from "MOD-002
      l_s_loop_to          TYPE sy-tabix,                       "to"MOD-002
      l_norecs             TYPE sy-tabix,                       "MOD-002
      l_count              TYPE sy-tabix.                       "MOD-002
    *Field Symbols.
      FIELD-SYMBOLS:
         <fs_flnmval> TYPE lx_flnmval."Field symbol for fild values
    Selection Ranges
      RANGES:  lr_bukrs      FOR ce4op01-bukrs, " Range for company code
      lr_versi      FOR ce3op01-versi," Range for version
      lr_paledger   FOR ce3op01-paledger,"Range for paledger
      lr_vrgar      FOR ce3op01-vrgar,"Range for vrgar
      lr_gjahr      FOR ce3op01-gjahr,"Range for Fiscal year
      lr_perbl      FOR ce3op01-perbl."Range for perbl
    Initialization mode (first call by SAPI) or data transfer mode
      IF i_initflag = sbiwa_c_flag_on.
    Initialization: check input parameters
                    buffer input parameters
                    prepare data selection
    Check DataSource validity
        IF ls_counter_datapakid = 0.
          CASE i_dsource.
            WHEN lc_datasource.
            WHEN OTHERS.
              IF 1 = 2. MESSAGE e009(r3). ENDIF.                "#EC *
    this is a typical log call. Please write every error message like this
              log_write lc_msgtype "'E'                  "message type
                        lc_msgcls  "'R3'                 "message class
                        lc_msgnum  "'009'                "message number
                        i_dsource   "message variable 1
                        ' '.                 "message variable 2
              RAISE error_passed_to_mess_handler.
          ENDCASE.
          APPEND LINES OF i_t_select TO s_s_if-t_select.
          APPEND LINES OF i_t_fields TO s_s_if-t_fields.
    Fill parameter buffer for data extraction calls
          ls_s_if-requnr    = i_requnr.
          ls_s_if-dsource   = i_dsource.
          ls_s_if-maxsize   = i_maxsize.
          ls_s_if-initflag  = i_initflag.
      Company Code
          LOOP AT s_s_if-t_select  INTO  i_t_select WHERE fieldnm = c_bukrs.
            MOVE: i_t_select-sign   TO lr_bukrs-sign,
                  i_t_select-option TO lr_bukrs-option,
                  i_t_select-low    TO lr_bukrs-low,
                  i_t_select-high   TO lr_bukrs-high.
            APPEND lr_bukrs.
          ENDLOOP.
    *Version (0)
    *SRSC_S_IF_SIMPLE-T_SELECT
          LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_versi.
       LOOP AT i_t_select  INTO  s_s_if-t_select WHERE fieldnm = c_versi.
            MOVE: i_t_select-sign   TO lr_versi-sign,
                  i_t_select-option TO lr_versi-option,
                  i_t_select-low    TO lr_versi-low,
                  i_t_select-high   TO lr_versi-high.
            APPEND lr_versi.
          ENDLOOP.
    *Currency Type (company code only)
         LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_paledger.
            MOVE: i_t_select-sign   TO lr_paledger-sign,
                  i_t_select-option TO lr_paledger-option.
            IF i_t_select-low = lc_b0.
              MOVE lc_01 TO lr_paledger-low.
            ELSEIF  i_t_select-low = lc_10.
              MOVE lc_02 TO lr_paledger-low.
            ENDIF.
            APPEND lr_paledger.
          ENDLOOP.
    *Record Type
          LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_vrgar.
            MOVE: i_t_select-sign   TO lr_vrgar-sign,
                  i_t_select-option TO lr_vrgar-option,
                  i_t_select-low    TO lr_vrgar-low,
                  i_t_select-high   TO lr_vrgar-high.
            APPEND lr_vrgar.
          ENDLOOP.
    *Fiscal Year
          LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_gjahr.
            MOVE: i_t_select-sign   TO lr_gjahr-sign,
                  i_t_select-option TO lr_gjahr-option,
                  i_t_select-low    TO lr_gjahr-low,
                  i_t_select-high   TO lr_gjahr-high.
            APPEND lr_gjahr.
          ENDLOOP.
    *Period Block/Year
          LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_perbl.
            MOVE: i_t_select-sign   TO lr_perbl-sign,
                  i_t_select-option TO lr_perbl-option,
                  i_t_select-low    TO lr_perbl-low,
                  i_t_select-high   TO lr_perbl-high.
            APPEND lr_perbl.
          ENDLOOP.
    *Value Field Name.
          LOOP AT s_s_if-t_select INTO i_t_select WHERE fieldnm = c_fldnm.
            MOVE:
            i_t_select-sign   TO gr_zfldnm-sign,
            i_t_select-option TO gr_zfldnm-option,
            i_t_select-low   TO gr_zfldnm-low,
            i_t_select-high   TO gr_zfldnm-high.
            APPEND gr_zfldnm.
          ENDLOOP.
    First data package -> OPEN CURSOR
          IF ls_counter_datapakid = 0.
    *Create 93 Field names in an internal table.
         MOVE 'VV010' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV011' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV012' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV013' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV014' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV015' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV016' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV020' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV021' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV030' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV031' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV032' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV033' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV034' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV035' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV200' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV201' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV202' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV203' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV036' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV037' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV038' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV039' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV040' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV041' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV042' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV043' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV204' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV205' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV211' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV212' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV213' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV222' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV223' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV230' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV232' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV233' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV500' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV501' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV502' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV503' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV504' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV505' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV506' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV507' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV508' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV509' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV510' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV511' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV512' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV513' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV514' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV515' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV516' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV517' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV518' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV519' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV520' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV236' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV206' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV051' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV052' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV053' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV054' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV055' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV056' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV057' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV058' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV059' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV060' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV241' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV242' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV243' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV244' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV245' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV246' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV247' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV248' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV249' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV250' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV521' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV522' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV523' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV524' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV525' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV526' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV527' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV528' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV529' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV530' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV227' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV226' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
         MOVE 'VV224' TO lw_fldlist-fldnam. APPEND lw_fldlist TO lt_fldlist.
            OPEN CURSOR WITH HOLD ls_cursor FOR
                 SELECT
                 paobjnr      " Profitability Segment Number (CO-PA)
                 paledger     " Currency type for an operating concern
                 vrgar        " Record Type
                 versi        " Plan version (CO-PA)
                 gjahr            " Fiscal Year
                 perbl            " Fiscal year/period block
                 pasubnr
                 vv010001     " List Price
                 vv011001     " Formula Price
                 vv012001     " Customer Price
                 vv013001     " Manual Price
                 vv014001     " Retail Pump Price
                 vv015001     " Markup
                 vv016001     " Net Proceeds Other
                 vv020001     " Excise Duty Offset
                 vv021001     " Duties & Government
                 vv030001     " Sales Discounts
                 vv031001     " Sales Surcharges
                 vv032001     " Sales Rebates
                 vv033001     " Agents Comm Paid
                 vv034001     " RBA CR Royalties
                 vv035001     " Other Revenues
                 vv200001     " Transfer PriceSupply
                 vv201001     " Prim Tran Tariff Sup
                 vv202001     " S&Handling TariffDis
                 vv203001     " Sec Trans Tariff Dis
                 vv036001     " Proceeds from Servic
                 vv037001     " Exchanges
                 vv038001     " Throughput fees
                 vv039001     " Output Tax Offset
                 vv040001     " CR comm & Oth Oil Pr
                 vv041001     " Supplier fees
                 vv042001     " RBA Fairshare Adjust
                 vv043001     " Contr Comm Paid IG
                 vv204001     " Sec Tran Tariff Supp
                 vv205001     " Comp Stock Obligatio
                 vv211001     " Prim Tran Tar Transf
                 vv212001     " S&Handling Tar Trans
                 vv213001     " Sec Trans TariffTran
                 vv222001     " DIS:S&Handl Tar OvUn
                 vv223001     " DIS:Sec Tr TarifOvUn
                 vv230001     " Transfer Price LSC
                 vv232001     " S&Handling Tar LSC
                 vv233001     " Sec Trans Tariff LSC
                 vv500001     " 3rd Party Purchases
                 vv501001     " Transf from Oth Sect
                 vv502001     " Purchases IG
                 vv503001     " Inter-Seg Transf Pur
                 vv504001     " Import Freight
                 vv505001     " Stock Variations
                 vv506001     " Other Product Cost
                 vv507001     " Pipeline Operat Exp
                 vv508001     " Primary Transp Expen
                 vv509001     " Manufacturing Expens
                 vv510001     " Supply /Process Exp
                 vv511001     " MK Processing Plants
                 vv512001     " S&Handling Expenses
                 vv513001     " Sec Transp Expenses
                 vv514001     " Point of Sale Expens
                 vv515001     " Contr Comm Rec IG
                 vv516001     " Assoc Inc Dividend
                 vv517001     " Marketing & Sell Exp
                 vv518001     " Other Rev from Dist
                 vv519001     " Other Rev Transferrd
                 vv520001     " Stock Write-Off
                 vv236001     " Oth cost Tar LSC SMP
                 vv206001     " Prim Trp tariff Dist
                 vv051001     " CR Net Turnover
                 vv052001     " Dummy Price 2
                 vv053001     " Dummy Price 3
                 vv054001     " Dummy Price 4
                 vv055001     " Dummy Price 5
                 vv056001     " Dummy Price 6
                 vv057001     " Dummy Price 7
                 vv058001     " Dummy Price 8
                 vv059001     " Dummy Price 9
                 vv060001     " Dummy Price10
                 vv241001     " DummyTariff 1
                 vv242001     " DummyTariff 2
                 vv243001     " DummyTariff 3
                 vv244001     " DummyTariff 4
                 vv245001     " DummyTariff 5
                 vv246001     " DummyTariff 6
                 vv247001     " DummyTariff 7
                 vv248001     " DummyTariff 8
                 vv249001     " DummyTariff 9
                 vv250001     " DummyTariff10
                 vv521001     " SD&A Rebates
                 vv522001     " Dummy Cost 2
                 vv523001     " Dummy Cost 3
                 vv524001     " Dummy Cost 4
                 vv525001     " Dummy Cost 5
                 vv526001     " Dummy Cost 6
                 vv527001     " Dummy Cost 7
                 vv528001     " Dummy Cost 8
                 vv529001     " Dummy Cost 9
                 vv530001     " Dummy Cost 10
                 vv227001     " Sec Tr TarifOvUn LSC
                 vv226001     " S&Handl Tar OvUn LSC
                 vv224001     " Pr Tra TariffOvU DIS
                 FROM ce3op01
                 WHERE   paledger = lc_02 AND
                 vrgar    IN lr_vrgar AND
                 versi    IN lr_versi AND
                 perbl    IN lr_perbl AND
                 gjahr    IN lr_gjahr.
          ENDIF.
    For all other cursors.
          FETCH NEXT CURSOR ls_cursor
              APPENDING TABLE lt_ce3op02
              PACKAGE SIZE ls_s_if-maxsize.
          IF sy-subrc <> 0.
            EXIT.
          ENDIF.
          SORT lt_ce3op02 BY paobjnr pasubnr paledger vrgar versi gjahr
               perbl.
          DELETE ADJACENT DUPLICATES FROM lt_ce3op02 COMPARING paobjnr.
    *Begin of MODE-002
          DESCRIBE TABLE lt_ce3op02 LINES l_norecs.
          l_s_loop_from = lc_1.
          DO.
            l_s_loop_to = l_s_loop_from + l_s_no_recs.
            LOOP AT lt_ce3op02 INTO lw_ce3op02
            FROM l_s_loop_from TO l_s_loop_to .
              APPEND lw_ce3op02 TO lt_ce3op01.
            ENDLOOP.
            SORT lt_ce3op01 BY paobjnr.
    *End of MOS-002
            SELECT
              aktbo       "     Current profitability segment (CO-PA)
              paobjnr     "     Profitability Segment Number (CO-PA)
              pasubnr     "     Profitability segment changes (CO-PA)
              kndnr       "     Customer
              artnr
              bukrs     "     Company Code
              prctr
              kokrs
           FROM ce4op01
           INTO TABLE lt_ce4op01
           FOR ALL ENTRIES IN lt_ce3op01
           WHERE paobjnr = lt_ce3op01-paobjnr AND
                 pasubnr = lt_ce3op01-pasubnr AND
                 bukrs  IN lr_bukrs.
    *CE1op01
            SELECT
            paledger
            vrgar
            versi
            perio
            paobjnr
            pasubnr
            belnr
            posnr
            rbeln
            rposn
           FROM ce1op01
           INTO TABLE lt_ce1op01
           FOR ALL ENTRIES IN lt_ce3op01
           WHERE paledger = lt_ce3op01-paledger AND
                 vrgar    = lt_ce3op01-vrgar AND
                 versi    = lt_ce3op01-versi AND
                 perio    = lt_ce3op01-perbl AND
                 paobjnr = lt_ce3op01-paobjnr AND
                 pasubnr = lt_ce3op01-pasubnr.
    **CE1op01
            LOOP AT lt_ce3op01 INTO lw_ce3op01.
              MOVE:
              lw_ce3op01-paobjnr   TO lw_flnmval-paobjnr,
             lw_ce3op01-paledger  TO lw_flnmval-paledger,
             lw_ce3op01-vrgar     TO lw_flnmval-vrgar,
                      lw_ce3op01-versi     TO lw_flnmval-versi,
                      lw_ce3op01-gjahr     TO lw_flnmval-gjahr,
                      lw_ce3op01-perbl     TO lw_flnmval-perbl.
    *appending all 93 fields as records
              MOVE lw_ce3op01-vv010001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv011001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv012001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv013001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv014001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv015001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv016001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv020001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv021001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv030001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv031001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv032001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv033001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv034001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv035001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv200001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv201001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv202001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv203001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv036001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv037001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv038001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv039001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv040001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv041001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv042001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv043001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv204001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv205001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv211001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv212001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv213001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv222001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv223001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv230001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv232001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv233001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv500001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv501001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv502001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv503001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv504001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv505001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv506001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv507001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv508001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv509001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv510001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv511001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv512001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv513001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv514001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv515001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv516001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv517001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv518001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv519001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv520001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv236001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv206001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv051001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv052001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv053001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv054001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv055001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv056001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv057001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv058001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv059001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv060001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv241001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv242001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv243001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv244001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv245001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv246001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv247001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv248001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv249001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv250001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv521001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv522001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv523001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv524001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv525001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv526001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv527001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv528001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv529001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv530001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv227001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv226001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
              MOVE lw_ce3op01-vv224001    TO lw_flnmval-zamunt.
              APPEND lw_flnmval TO lt_flnmval.
    *Segrigating all one record into 102 records is complete
            ENDLOOP.
            LOOP AT lt_flnmval ASSIGNING <fs_flnmval>.
              IF l_index > 93.
                l_index = 1.
              ENDIF.
              READ TABLE lt_fldlist INTO lw_fldlist INDEX l_index.
              IF sy-subrc = 0.
                CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                  EXPORTING
                    input  = lw_fldlist-fldnam
                  IMPORTING
                    output = <fs_flnmval>-fldnam.
              ENDIF.
              l_index = l_index + 1.
            ENDLOOP.
            SORT lt_ce4op01 BY paobjnr.
            SORT lt_ce1op01 BY paobjnr  paledger vrgar  versi.
            SORT gr_zfldnm BY low.
            DELETE lt_flnmval WHERE fldnam NOT IN gr_zfldnm.
            LOOP AT lt_flnmval INTO lw_flnmval.
              READ TABLE lt_ce4op01 INTO  lw_ce4op01 WITH KEY
                                 paobjnr = lw_flnmval-paobjnr BINARY SEARCH.
              IF sy-subrc = 0.
                MOVE :   lw_flnmval-paledger  TO lw_e_t_data-paledger,
                         lw_flnmval-vrgar     TO lw_e_t_data-vrgar,
                         lw_flnmval-versi     TO lw_e_t_data-versi ,
                         lw_flnmval-gjahr     TO lw_e_t_data-gjahr,
                         lw_flnmval-perbl     TO lw_e_t_data-perbl,
                         lw_ce4op01-bukrs     TO lw_e_t_data-bukrs,
                         lw_ce4op01-kndnr     TO lw_e_t_data-kndnr,
                         lw_ce4op01-artnr     TO lw_e_t_data-artnr,
                         lw_ce4op01-prctr     TO lw_e_t_data-prctr,
                         lw_ce4op01-kokrs     TO lw_e_t_data-kokrs,
                         lw_flnmval-fldnam   TO lw_e_t_data-zfldnm,
                         lw_flnmval-zamunt   TO lw_e_t_data-zamount.
    CE1op01
                READ TABLE lt_ce1op01 INTO lw_ce1op01 WITH KEY
                            paobjnr = lw_flnmval-paobjnr
                            paledger = lw_flnmval-paledger
                            vrgar  = lw_flnmval-vrgar
                            versi = lw_flnmval-versi BINARY SEARCH.
                IF sy-subrc = 0.
                  MOVE: lw_ce1op01-rbeln  TO lw_e_t_data-rbeln,
                        lw_ce1op01-rposn  TO lw_e_t_data-rposn.
                ENDIF.
    CE1op01
                APPEND lw_e_t_data TO gt_out_data.
              ENDIF.
            ENDLOOP.
    *Begin of MOD-002
            FREE lt_flnmval.
            REFRESH :lt_ce3op01,lt_ce4op01,lt_ce1op01.
            e_t_data[] = gt_out_data[].
            DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
            l_s_loop_from = l_s_loop_to + lc_1.
            l_count = l_count + 20.
            IF l_count GE l_norecs.
              EXIT.
            ENDIF.
          ENDDO.
    *End of MOD-002
          ls_counter_datapakid = ls_counter_datapakid + 1.
        ENDIF.                        "IF S_COUNTER_DATAPAKID = 0
      ELSE.
        IF i_maxsize IS INITIAL.
          RAISE error_passed_to_mess_handler.
        ENDIF.
        IF g_start IS INITIAL.
          g_start = 1.
        ELSE.
          g_start  = g_end + 1.
        ENDIF.
        g_end = g_start + i_maxsize - 1.
    Population of E_T_DATA based on Data records size
        APPEND LINES OF gt_out_data FROM g_start TO g_end TO e_t_data.
        DELETE e_t_data WHERE zfldnm NOT IN gr_zfldnm.
        IF e_t_data[] IS INITIAL.
          RAISE no_more_data.
        ENDIF.
        ls_counter_datapakid = ls_counter_datapakid + 1.
      ENDIF.
    ENDFUNCTION.
    Thanks & regards,
    Sreekanth
    +91 9740091981

    Hello Sreekanth,
    See this blog [Generic Extraction via Function Module|/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module]
    Also see this
    [Line Item Level Data Extraction for Financial Accounting and Controlling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a]
    Thanks
    Chandran

  • Need steps in creation of LO extractor

    Hi All,
    I am new to SAP BI, I  am working on **LO and FI-Sl extractor..can any of you please provide me the detail steps in creation of these extractors.
    Please do the needful by providing the required information.
    thanks,
    Vinay.

    Hi Vinay ,
    Plz find the steps below for LO
    LO :
    1. Run T-Code LBWE
    2. Select your area EX : You want to activate the DS : 2LIS_02_SCL.Then u need to Expand the Purchaisdng application component.
    3. Clcik on maange extractor
          -  Using this you are going to select the Required fields in u r struture by dragging from right to left
    4. Click on the DS : 2LIS_02_SCL
          -Here you will set the options like slection,hide  etc...
    5. Activate
    6. Job Control..
    7. Update mode .
      -  Used queued delta option.
    8 Your LO DS is available in RSA6 T-Code.
    9 You need to fill the data for the DS by running the T-Code "OLI2BIW".
    10.Check the dara for the DS in RSA3.
    Regardds
    Ram

  • Runtime error in extractor enhancement

    Hi,
    I need to enhance the extractor 0WBS_ELEMT_ATTR with an additional field. The field is a Z field from the table PRPS.
    Now PRPS is a base table for the extractor for this extractor, so simply adding this field into the append structure should suffice.
    However, when I do this the extractor gives the following runtime error:
    Syntax error in program "SAPLPSBW "
    Component called ZZSO already exists.
    The error is in the function call  "e_fname".
    I have found that the same Z field is used in another structure CNCI_PRPS. Could this be leading to the error?
    Please let me know if any of you have any insights as to why this problem might be occurring.
    TIA,
    Amrita

    Hi,
    In my case the problem was caused because the same ZZ Field was used in two structures.
    One for ECC and one for BI. This was causing some interference.
    To solve this I changed the field name in my extract structure to ZZZSO and populated it via a CMOD routine.
    Hope this helps.
    Amrita

  • Why the 2LIS_08TRTK extractor can not get  all data

    Hello, BW Gurus.
    Why the 2LIS_08TRTK and 2LIS_08TRTLP extractors can not get all data. I had used the RSA3 and get 10 registers, when a check at the VTTK table I had 20 registers, I didnt use filters at RSA3, could you help to know what happen o correct it.

    Is it because
    <i>
    Shipment documents and their dependent objects (shipment stages as well as shipment items [deliveries in the shipment]) are only extracted into BW when the Shipment completion status has been set.
    This is necessary because the numeric values that result from the delivery documents are only established at the time. If the data were already stored earlier in BW, the shipment data would not be updated if the delivery notes were changed in BW.
    </i>
    - from oss note 573470.

  • BW DS Extractors for FI Tables

    Hi everybody,
    can anybody please tell me the standard extractors (BW Datasources) for following tables
    - GLT3
    - GLPCT
    - FAGLFLEXT
    Thanks a lot

    hello,
    For GLPCT:
    data-/info source 0EC_PCA_1. The cube is 0PCA_C01.
    For GLT3 :
    3FI_SL_09_TT
    or
    check the DS 3EC_CS1A.It is giving the data as like data there in table GLT3.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/6c/4d6637a04c2367e10000009b38f8cf/frameset.htm
    For FAGLFLEXT :
    0FI_GL_10 extracts data from FAGLFLEXT table, that is connected to DSO (0FIGL_O10) --> Cube (0FIGL_C10) --> Virtual Cube (0FIGL_V10) and u will all the standard reports from there
    Reagrds,
    Dhanya

  • Fields missing from extractor

    Hi Guys,
    I have 65 fields in an extractor (Generic Datasource). When I replicate the datasource and go to the fields tab in datasource, i see that one of the line is being skipped.
    After Pos. 26, i see Pos. 28, 29..... Pos. 26 and Pos. 27 are both currency but we have identified one as WAERS and WAERS_LOC (Coming from different tables).
    Secondly, when I create a transformation for the DSO and join it with this datasource, I see only 61 fields (instead of 64 or 65).
    Has somebody encountered this problem before ? How do I fix it ?

    Hi,
    I understand that on the left you are seeing the fields you have in your datasource and on the right side, the infoobjects you have in your infoprovider. They don't have to be identical. If you want them to be the same means that you want to upload all the fields you have in your datasource. Then you have to add the corresponding infoobjects to your infoprovider.
    If you are refering that your datasource is different than the one you see in the transformation, it could be that you haven't replicated it correctly. Select the source system and replicate it again.
    Hope it helps,
    Regards.
    Edited by: Iñaki Rueda on Jan 21, 2010 6:31 PM

  • 0FC_OP_01 extractor issues- DFFKKOPBW data not matching with

    Hi All
    We have an issue with the extractor 0FC_OP_01. Our business is comparing the values in
    R/3 report u2013 G/L Account Balance Display (t-code S_ALR_87012277)   with the
    Open Items by GL Account report in BW .(actually these values in the BW report are coming from DFKKOPBW table in R/3) .
    But since august, the R/3 G/L account balance report is not matching with the DFKKOPBW table balances. So bottom line the extractor 0FC_OP_01 is doing something wrong when populating the DFKKOPBW table  which is causing these two reports to be out of balance
    Did anybody face this kind of issue before? Please Advise.
    FYI : We are following the same procedure to populate the DFKKOPBW table as in the below article.
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a9996115-0b01-0010-b2b2-d9de0170a425;jsessionid=%28J2EE3417800%29ID0001499250DB01896329908162586522End
    Thanks
    KPK

    In my case the Cube/PSA data itself is not matching with the R/3 report data. 
    Basically we run a job in R/3 in t-code FPBW with a Date id and Indentification. This job will pull the entries from base table DFKKOP into DFKKOPBW table .Then FRom this DFKKOPBW table data is loaded into PSA/Cube.
    Here in my case the data in table DFKKOPBW itself is not matching with the R/3 report -  G/L Account Balance Display (t-code S_ALR_87012277)) .
    I am following the same procedure to run the JOb in T-code FPBW to populate the DFKKOPBW table as listed in the document at the above link.  Moreover this difference in balances is occuring only starting from August ..Till July the balances in DFKKOPBW tally with the R/3report.
    Please advise ..
    Thanks
    KPK

  • Delta with reversal into cube from LO extractors

    Hi SDN,
    In our LO extraction design we have write-optimized DSO used as EDW as the first layer in BI. Then data is sent to Business Content infocubes, such as 0PUR_C01 though we are using their copies and instead of Update Rules/Transfer Rules, we are using PSA, Transformation, Write Optimized DSO, another transformation and onto the cube. DS and all other objects in the data flow are BI 7.
    What we are not clear about is the role or ROCANCEL when passed to both STORNO and RECORDMODE and its impact on the cube after the write-optimized DSO. Some key figures are reversed for 'R' but others are not.
    We had thought that 2LIS_02_ITM via a Write Optimized DSO will pass on STORNO and RECORDMODE to the cube which should have reversed all key figures in the cube if the value is 'R'. But it is not happening. Whatever key figures were reversed in the source system, they remained reversed, others are still there and adding another row in the cube with some positive values.
    Can anyone shed light on this or provide reference to documentation regarding delta processing in the cube, especially from LO extractors like 2LIS_02_ITM, etc.?
    Thanks
    SM

    Friends,
    Thanks for the reply.
    My question is more fundamental.
    In 3.5 There was expected to be no DSO between Source system and the cube. How were the Update, add and delete handled then?
    As I see it, write-optimized DSO is no hindrance because essentially the data is coming into the cube as if there was no DSO in the middle. I do not see SAP suggesting a DSO anywhere between the source and business content cubes, especially in our case dealting with 2LIS_02_ITM, SCL, etc. to handle delta.
    Are you saying that no delta management is possible without inserting a DSO before the cube? Please realize that WO DSO only brings data request by request without any summation and overwrite confusion.
    What I puzzled at is the lack of comprehensive unfied and detail information either in documentation or a blog.
    Please advise.
    SM

  • HR-PA Personnel Administration Adjusted Hire date not in std extractor?

    All,
    Does anybody know if the dates in PA0041, like adjusted hire date, Original hire date, Severance date, etc are available in extractors?  I have been doing BW for some time, but am new to HR.  I don't want extend the 0employee data source with these dates unless I have to.  Any advice would be greatly appreciated.
    Kind Regards,
    Chris

    Savornin,
    Thank you very much for your reply.  It was very helpful to me.
    Kind Regards,
    Chris

  • How to track the blocked POs in 2LIS_02_SCL extractor

    Hi Gurus,
                  We have field ROCANCEL in 2LIS_02_SCL extractor which sets to X and R for cancelled and deleted records. On ECC side we either delete the PO (at Item level) or block the PO.
    For deleted POs the ROCANCEL flag is setting to R and we are OK with this but how can we track the blocked orders?
    The business requirement is to report on blocked orders too.
    Thanks,
    Anil

    Hi,
    In Bw thre is always confusion about following Dates.
    Posting Date (0PSTNG_DATE)
    Schedule Line Delivery Date (0SCL_DELDAT)
    Statistics Date (0STAT_DATE)
    So ask Functional Consultants and Business USers and Identify the corretc Date in ECC and then Change the Mapping In UPdate Rules in BW. i.e. What date USer is wanting and accordingly we nee dtgo change the mapping in UPdate Rules in Time Char Tab in UpdateRules.
    Thanks
    Reddy

  • Extractor For VENDOR Blocked Invoices

    I have a requirement to create a report for Vendor aging report for Blocked invoices
    for which I need to do data modelling first.
    My questions are as follows
    1) I found extractor 0FI_AP_4 for Vendor Line items. but I need following fields
    who blocked the invoice and on what date the invoice is blocked
    pls see tcode fb03 for an eg.
    Note this is only for vendor invoices

    Hello Syed,
    Classification data for objects like material or vendor needs to pulled through classification data sources which needs to created specifically through transaction CTBW.
    I am not sure whak kind of information you are looking for...but if it is the information about classification then it has to be created.
    You can just make a search on classification data sources as there are numerous threads about it.
    If its just classification characteristics like vendor type then you can look for master data sources for these objects.
    Thanks
    Ajeet

  • Purchase order and FI Document Number - R/3 extractor

    Hello Experts -  I have a question on the BW extractors on the R/3 side. Are there any standard extractors out there where I can get Purchase Order information and related FI document number information. In case if I have to create one what tables do I need to reference to create generic extractor. Thanks for your help.
    Regards,
    Venu.

    Hi Venu,
    This could be better done on a standard FI extractor by enhancing it with purchase order information.
    Atleast, this is the way we did in our scenario.
    Have 0FI_GL_4 enhanced with data from EKKO, EKPO tables, with required feilds. This enhancement may not be quite detailed.
    Also if you are interested in a complete gen extr. then the above two tables along with BSEG should do.
    Naveen.A

  • Extractor for PM process orders

    Hi Experts,
    We are looking for a PM extractor for process orders, this is to get component information (material details), we found 2LIS_04_P_MATNR but it's limited to production orders only, also tried filling setup tables for this extractors but not fetching process orders at all.
    http://help.sap.com/saphelp_nw70/helpdata/en/88/7fc73c0c52085be10000000a114084/frameset.htm

    Is there any clues?

  • Open Orders - Extractor 2LIS_11_VASTI

    We are trying to develop an Open Orders report that would include items that are delivered (delivery related) and those that are dropped ship from a 3rd party (order related).  We need to show open quantity and value. 
    The standard BI Content that we are currently using only shows open items that are delivered through SAP.  We need the other 3rd party items as well.  We believe that a solution would most likely require the order header and order line item status data (data from tables VBUK and VBUP in SAP).
    Has anyone else had to develop a solution like this?  Did you use the standard extractors?  Is there a standard SAP solution for this in BW or did you have to create something custom?
    Thank you for your help.

    Hi Ann,
    I have a solution for you, which you can try...
    create a table level generic data source on the table/view of VBBE which would
    contains all your required data Hopefully..
    Hope it helps..
    assign points if useful..
    Cheers,
    Pattan.

Maybe you are looking for

  • After time change, airport "out of range"

    Since my 12" powerbook underwent the daylight savings time change, its connection with my airport extreme is failing. It will establish a connection but will drop the connection after a few minutes and report that the airport is out of range (though

  • How do I convert images I enter into a PDF into text?

    Would you also happen to know how I convert images I enter into a PDF into text? (I can't use OCR if text already exists on that page of the document)

  • COA Requirement for 'Assembly' products

    Dear Experts We are in process of Implementing SAP QM using ECC 6.0 and we have one requirement for our "Toll Manufacturer" (Third Party Producers for us). These toll manufacturers produce chemical products for us and do the Quality Checks and Ship t

  • Key-command to open CD tray?

    Is there one? I'm using a non-mac keyboard.

  • Can I remove the message that is added to every new email

    When I compose a new new email, a message appears at the end which says: 'Sent from my Sony Xperia Smartphone on the Telstra Mobile network' I can delete this message manually each time but is there a way that I can remove it permanently? I have come