PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

Hello,
Iam facing this issue at the time of hiring (IT0000). The internal number range (01) is maintained in transaction code PA04 from
00000001 to 90000000 and ext check box is NOT checked. In NUMKR , the return value of the feature is also 01 .
Now the weird thing is i get this so called error " No Valid Interval Found (Internal Number Assignment)" but if i ignore the error and hit enter / save , it lets me save IT0000 and moves on to the next infotype in infogroup.
has anyone faced this before? what could be the possible solution here? Any help would be greatly appreciated
thank you in advance
Reema

Hey Reema,
http://www.sapfans.com/forums/viewtopic.php?f=11&t=327031
NUMKR-Feature
I think these are similar threads and have the same problem as you. Hope Partha Murli picks this up or you might just mail him.
cheers
Ajay

Similar Messages

Error in SAP HCM OM No valid interval found (internal number assignment)

Hi Experts,
I am facing a typical problem. When ever I am trying to create any OM Object from any transaction say PO10,PO13,PO12 what ever the system is giving an error "No valid interval found (internal number assignment". I have check every thing i.e. Number Range, PLOGI PLOGI in T77S0 but the situation remains same. It seems any how the system is not at all picking up any number range at all. Please suggest.
Samrat Sarkar

Hi Samrat
Reading the above posts I think you are trying to create the number range as "01S". The reason that you may not be allowed to create a number range is because your plan version might be different.
Check the below node to see what is set as your active plan version:
Personnel Management --> Global Settings in Personnel Management --> Plan Version Maintenance --> Set Active Plan Version
Then while creating your number range subgroup you would have to create as PlanVersionObject type:
Example: Number assignment for plan version 10 / object type S then Subgroup 10S
Try this out.

Error "No Valid Interval Found"

I changed EX number range for the object position 01S to IN, we used this number range as an EX number range and status to "1".
The number range is 99100000-99999999,this is how it looks in the system:
No   From Number      To Number       Current Number    EX
IN    32000000           39999999         -                           Checked (This number range was Internal before)
IS    99100000           99999999         1                          Not Checked. ( This number range was EX before)
I checked the NUMKR Feature, the return value is 01.
When I try to create a new position via P013, I am getting this error
Error "No Valid Interval Found"
Please help.
Edited by: Ginasap on Oct 6, 2011 5:08 AM
Edited by: Ginasap on Oct 6, 2011 5:22 AM

Trying to create new entry going via SM30 to table T77IV click new entries $$P, I am getting error "Please specify a valid subgroup"
Should it not be $$S for positions not $$P? just thinking, anyways, I tried with $$S but getting the same error.
Also, I am looking for number range 99000000-9999999, this was EX number range before but I would like to use it as IN number range.
Edited by: Ginasap on Oct 6, 2011 5:39 AM

No valid interval found

Hi
When I am trying to create Org Unit in PO10 I am getting an error saying "No valid interval found (internal number assignment)".
Pl let me know your suggestions.
Thanks in advance

Hi
Try this
1.sm30
2.Table name :T77IV
3.Change mode
4.Maintain the number IN as like EX in $$$$ (if it not exsists create the entry and maintain)
hope it solves
with regards
partha
keep sharing and learning

Internal Number Assignment-OM(Org Unit)

Hi
In change mode of org.& staffing, system is not allowing to create org.stru. in current plan. it's throwing error "No Valid interval found". Probably this is related to internal no. assignment.
Can some one help this, how to assign that in back end..

Hi,
Go to OONR and check what settings are already there.
Under entry $$$$ in Interval maintenance, there will be two intervals, one EX and other IN. EX interval range would be used for external assignment, IN would be used for internal assignment.
Check the ranges of the intervals. One reason could be that the range has been used up.
Regards,
Shreyasi.

No valid interval found (No internal Assignment) in red message Message no.

Dear Expert,
When i am hiring with transaction code PA40 in ECC5.0 its says
"No valid interval found (No internal Assignment) in red message
Message no. 5A365
Could you please tell me good method?
Many thanks.
Best Regards,
Merry

Hi Merry Zhang,
Can u help me I have a same problem ?
May be u can share me some information for your resolved issue
Many thanks,
-Oscar-

Error in ME59N- Internal number assignment not defined

Dear Gurus,
I am getting error while creation automatic PO In ME59N. Below error shows
Error Name                                                                                          Massage Class          Msg No.
PO header data still faulty                                                                            MEPO                         2
Internal number assignment not defined (please enter number)                 06                              243
I have done all the setting in Material Master & Vendor Master for Automatic PO Genration.
Aslo I maintain the source list & Info Record for two vendors.
I assign the source of supply in PR .
After this when I exicute in ME59N by entering Purchasing Group,Purchasing Org,Vendor,Plant
and selected the Per Requisition , per contract tab.
After this above two error is showing in SAP.
Kindly give us solution to resolve this.
Regards.
Abhijit
Subject changed to reflect the issue- by: Jürgen L

Hi
The error is probably caused because T161-NUMKI = <BLANK>. Please fill in the valid T161-NUMKI.
This needs to be done in customising
Transaction SPRO:
Material Management -> Purchasing -> Purchase Order -> Define Document types
Number range in the case of internal number assignment
Hope this information is of help.
Kind regards,
Lorraine

PO Error-Internal number assignment not defined

dear all gurus,
while i am creating the po and save it, the error occurs that Internal number assignment not defined (please enter number).
i hv already defined the no. range for the po.
now what should i do further in these matter.
rgds,
rajesh

Dear,
SPRO - Materials Management - Purchasing - Purchase Order - Define Document Types.
Select your document type and Assign your number of number range in number range intraval.
Regards,
Mahesh Wagh.

Internal number assignment for object

Hi Experts,
While creating PM order the error comes"Internal number assignment for object AUFTRAG"(numbers are in critical area).
I am not able to create order.
Please help.
Regards
Vishal

Hi Vishal
Your number range might have exhausted, you need to extend it through T-code SNRO. number range object (AUFTRAG). click numbr range button then change interval & extend the to number
shakti

How to create a Business Partner with internal number assignment

Hello,
We are using a CRM 7.0 system. We want to create a new Business Partner using LSMW. We chose IDoc basic type CRMXIF_PARTNER_SAVE_M03 to perform it. We want to create it with internal number assignment (we don't have BP ID or BP GUID). Unfortunatelly, when we leave PARTNER_NO and PARTNER_GUID fields empty, we get an error message that we should supply at least BP ID or BP GUID. So what values should we enter in order to create a BP with internal number assignment?
Please put attention that we also don't want to enter any alternative external number because we don't want the end user to see after in the WebUI.
Thanks in advance,
Sergey Kozyrev

Hello,
Standard CRM PC UI application offers three options when you push 'New' button: 'Person', 'Organization' and 'Group' (combobox appears). In your case, 'Person' should be selected.
p.s. If you don't see combobox mentioned above, it could be security issue.
Kirill

Create document number range 22 using internal number assignment

Hi friends,
now i am working upgradation project from 4.7 to 6.0. sandbox i created one Asset, After that i posed amount to that asset by using f-90.now i run depreceation in ABAF T code the bellow issue is comming
Create document number range 22 using internal number assignment
     Message no. AA776
Diagnosis
     Processing terminated because the document number range 22 for year 2011
     was set up with external number assignment.
System Response
     For periodic posting of depreciation, you have to create a document
     number range with internal number assignment, since the document numbers
     are assigned from Financial Accounting.
Procedure
     Change the number assignment for the number range 22 from external to
     internal in Customizing for Asset Accounting. See SAP Note 890976 for
     more information.
But no ranges for that particular year having, if any changing that one it s not come edit or deleating
ple any one help me
Regards
Gangadhar reddy

Hi Gangadhar,
after 4.6C the Internal Number Range was changed into external Number Range due to technical requirements.
As the error messages due to posting manual into the affected number ranges could not be hindered in this case with ERP2005 the desicion was made to rechange to internal number range. Note 890976 describe what to do here.
regards Bernhard

Create document number range 03 using internal number assignment in AFAB

Hi Experts,
Where i have to create number range to Depreciation Posting ? Please mentain Transaction code .
I had check T Code:AS08 (No Tick is assign) & FBN1 (Intrenal Tick is assign)
I am doing T Code AFAB
Folowing error coming
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2011 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Waiting for reply
Regards,
Girish

locked. please read the error message and search the IMG (very easy).

Internal number assignment not defined (please enter number)

Hi gurus,
I am trying to recreate a PO with the BAPI BAPI_PO_CREATE but I always get the following error message 'Internal number assignment not defined (please enter number)'. Can anyone assist please
Regards,
Thandi

Hi,
Are you passing the purchase requisition number?
Possibly you cannot use that.
Check the same.
First try creating a PO via ME21N with the data you have.
Check if you face any problems and then try with the BAPI.
It will save a lot of time in investigating the errors.
Regards,
Ankur Parab

Internal Number Assignment for Object QMERKRUECK

Hi Gurus,
When I clicked on SMPL( sample calculation) in the Sample tab of the Inspection plan (QA02) I got the below Information error " Internal Number Assignment for Object QMERKRUECK (Numbers are in critical area).
Though we have enough number range why this Information error is coming? Couold you please explain the cause and how to avoid it?
Thanks in advance,
Shashidhar

Hi Shashidar,
Actually its gap
Reason: some times number ranges overlap or missing from the buffer data base system will happen very rarely.
in our QM module, below objects error chances may happen
- QLOSE      (Inspection lots in QM)
- QMEL_NR    (Number range - message)
- QMERK      (Confirmation number)
- QMERKMALE (Master inspection characteristics in QSS)
- QMERKRUECK (Confirmation number of an inspection characteristic in QM results processing)
- QMETHODEN (Inspection methods in QM)
- ROUTING_Q (Number ranges for inspection plans)
- QCONTROLCH (Quality control chart)
Read Notes 504875 and 678501.
Thanks
Shiva

MDM Internal number Assignment

Hi Experts,
Need your guidence on the below scenario.
1. how is the internal number assignment configuration done in MDM ( where the number is generated as soon as you save the records in the repository)
2. ECC has internal number generation for FERT Material, and i am creating a record in MDM which also has internal number generation whose number range match with the ECC number range for material type FERT. what is the configuration required to syndicate the record from MDM to ECC ( as ECC has internal number generation).
Thanks in Advance.

Hi Sandhya,
Its a difficult thing to comment why the design is like this,there is a purpose why it is made such.
Suppose you create a Material in MDM system 100010002000(say) and ECC system is defined for internal number generation.
You send the material through PI to ECC as idoc.
And torrow MDM system goes down or there is a business requirement because of which you have to create Material in ECC.
This will require huge manual intervention and possibility of error is quiet high if Number range is defined as external.
Whereas if it is Internal (as in your case) ECC takes care of the number range and the sequence.
The ALE processing of idoc does not update the status of the current number range used.You can goto MMNR to check this for Material,xkn1 for Vendor.And this is the major concern with external number generation definition in ECC.
For further detaills regarding Material number range please go through :
http://saptechsolutions.com/pdf/MaterialNumberRangesAndFormatting.pdf
Hope this helps!
Thanks,
Ravi

PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

Similar Messages

Maybe you are looking for