PA/OM Integration (RHINTE10 & RHINTE30) - Non Input Fields on IT1 like Job
Hello,
Is there a way to have the job created by RHINTE30 to run successfully in the background for non input field updates? Recently we used LSMW to mass update Job to Position relationships. But Job is not an Input Field on IT1. In some countries its not displayed as well. If RHINTE30 is run in the foreground, we gt the error message and we can bypass it and still load it; but running it in background will cause it to skip over thus not changing any record at all. Is there a way around this?
Thanks,
Nakul
Hi,
Can you check if OSS note 126869 is relevant in this case?
Hope this helps.
Donnie
Similar Messages
-
How can we protect the ztable non key fields data in sm30 display.
Hi experts,
I have created tablemaintenence generator for one z table, in sm30 user has access to enter the data.
in that maintenence i have to protect the non key field values data like once the user saves his data.than in the edit mode it has to show the nonkey fields data but dont access to edit some nonkey fields... please helpHi
U need to change the screen flow generated by maintenance view generator: here go to Enviroments->Modifications->Screen; doubleclick on your screen and the system take you to screen painter.
Here go to screen flow and in PBO add new module in order to protect the field for the old records: u can use the statament LOOP AT SCREEN./ENDLOOP to do it.
LOOP AT SCREEN.
IF .....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max -
Hi again,
currently i am experiencing SVG tiny.
Is it possible to use a SVG GUI with input-fields? I like the SVG style...but i need input fields (text fields etc) At the moment i have "only" a UI with menu items which work well!
Is it possible to read a text-field from a SVG GUI and to get the user input?!
Thanks for your answer!Would be useful to have it, but AFAIK there is no input element in the SVG specification.
-
Filling suggestions for Input Fields
Hi there!
I wish to have kindda memory of previous filling for some
given input fields.
Just like, for example, it works in phpMyAdmin or other HTML
forms :
You start typing and suggestions of words to complete then
appear.
Thanks for any clue.Thank you for responding, but the one you mentioned is for
AS3.
I use AS2...
Meanwhile, I found this:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1026626# -
Editable / Non editable input field CELL (individually) on ALV dynamically
Hi again,
I need more help with an issue.
I have an ALV table with three columns that is necessary put values into input field cell editors, but these cells should be editable or not depending of business logic. I've got make editable or non in entire ROW LEVEL (method set_read_only_fieldname( 'READ_ONLY' )., but ¿how can I set editable or non at individual cells?
Any idea to do that?
Regards
Edited by: vanbelal on Mar 24, 2010 3:33 PMCan you paste any example source code?
I don't know how can I bind enabled property dynamically to individual CELL, I'm setting properties to whole column.
lt_columns = lr_column_settings->get_columns( ).
LOOP AT lt_columns INTO ls_columns.
if ls_columns-id = 'COLUMN1' or 'COLUMN2' or 'COLUMN3'.
CREATE OBJECT lr_input_field
EXPORTING
value_fieldname = ls_columns-id.
ls_columns-r_column->set_cell_editor( lr_input_field ).
Should I put business logic here? how can I set enabled or not on CELL, at this point I'm processing whole column!!
lr_input_field->set_enabled( abap_true ).
endif.
ENDLOOP.
Edited by: vanbelal on Mar 24, 2010 4:12 PM -
Award amount field in Infotype 183 as display (Grey/Non-input) only field
Hello friends,
I want award amount field in infotype 183 (Award) as display (Grey/Non input) only field. I tried to do it throught txn user screen change but it is not working.
Pls suggest how to do it.
Thanks in advance
anandTry using IT Screen Control table T588M with Module Pool MP018300 and check the radio Button for the field Amount as Output only .
If there is no entry for MP018300 in T588M , Create one .Hope this works for you.
Subhash -
Disable an Input field with the help of a radio button selection.
Hi Guys,
I know it is a very basic question and also has many threads for the mentioned query. None of the threads gave me a real clue about the problem. It is as follows:
Simply, I have an input field and there are two more radio buttons on the screen, say rd1, and rd2.
Initially Rb_gtgr is active and input field is blank and disabled, and when i select Rb_selgr, input field should be active and mandatory. It means when i try to execute the code with out entering any value after it is enabled, an error message should appear. For this the code is as follows:
AT SELECTION-SCREEN OUTPUT.
PERFORM screen_grace_on.
AT SELECTION-SCREEN ON p_grace.
PERFORM check_grace_days.
FORM screen_grace_on .
DATA: l_v_grace TYPE char2.
CONSTANTS: l_c_grace TYPE char7 VALUE 'P_GRACE'.
l_v_grace = p_grace.
CLEAR p_grace.
IF rb_selgr EQ c_x.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'.
screen-required = 1.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-group1 = 'ABC'.
screen-input = 0.
screen-active = 1.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
ENDIF.
ENDFORM. " SCREEN_GRACE_ON
FORM check_grace_days.
IF rb_selgr EQ c_x AND p_grace EQ 0.
PERFORM screen_grace_on.
MESSAGE e492(/ams/ramfcmess1). " Enter the number of Grace days
ELSEIF rb_selgr EQ c_x AND p_grace GE 0.
PERFORM screen_grace_on.
ENDIF.
ENDFORM.
Ideally this code should work since in the PBO i.e., At selection screen output i am enabling the fields, and also when i select the second radio button i am also checking for the value too..
I am working on 4.7 version of SAP. The Most interesting observation is it works fine for few variants, and not with others.
Thank youHi,
Go through this following code,
selection-screen begin of block B2 with frame title TEXT-005.
selection-screen begin of line.
parameters: P_BIRPT type C radiobutton group RAD1 default 'X' user-command UCOMM.
selection-screen comment 3(20) TEXT-002 for field P_BIRPT.
selection-screen end of line.
selection-screen begin of line.
parameters: P_COLRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-003 for field P_COLRPT.
selection-screen end of line.
selection-screen begin of line.
parameters: P_PAYRPT type C radiobutton group RAD1.
selection-screen comment 3(20) TEXT-004 for field P_PAYRPT.
selection-screen end of line.
selection-screen end of block B2.
selection-screen begin of block B1 with frame title TEXT-001.
select-options: SO_KTOKD for KNA1-KTOKD modif id M4,
SO_BLART for BSIS-BLART modif id M2.
parameters: P_PAID type ZCLEAR modif id M3 as listbox visible length 20.
selection-screen end of block B1.
at selection-screen output.
loop at screen.
if P_BIRPT eq 'X'.
if SCREEN-GROUP1 = 'M2' or SCREEN-GROUP1 = 'M3' .
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
modify screen.
endif.
elseif P_COLRPT eq 'X'.
if SCREEN-GROUP1 = 'M3'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
modify screen.
endif.
elseif P_PAYRPT eq 'X'.
if SCREEN-GROUP1 = 'M2'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
modify screen.
endif.
if SCREEN-GROUP1 = 'M4'.
SCREEN-INVISIBLE = '1'.
SCREEN-ACTIVE = '0'.
modify screen.
endif.
endif.
endloop.
Thanks
Anil D -
How can I create a Text-Input Field in BexAnalyzer for a Planning Function
Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advanceHi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor -
Firefox 3.6.8 does not correctly display inuktitut text in an input field. Any solution?
Firefox 3.6.8 seems to have an issue with Unicode in input fields, e.g.
The following code
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
should look more or less the same as
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
The first one uses a Unicode font (available at http://www.gov.nu.ca/english/font/) the second one one of the traditional non-unicode fonts.
The two squares in the first string are not really squares. When you copy and paste the string onto a system with a unicode font containing canadian syllabic characters, then the squares are displayed correctly.
Additional information: I just found that this is not related to input fields, as I thought in the beginning, but also happens within normal Ps or DIVs.
Strangely enough, the following complete HTML seems to work when saving as a local file:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="iu-ca" lang="iu-ca">
<head>
<meta http-equiv="content-type" content="text/html; charset=utf-8">
<style>body{font-family:Arial,Pigiarniq;}</style>
</head>
<body>
<p>ᕿᓂᕐᓂᖅ</p>
<div>ᕿᓂᕐᓂᖅ</div>
<p>a real unicode font:</p>
<input type="text" value="ᕿᓂᕐᓂᖅ..." style="font-family:Pigiarniq">
<p>a non-unicode font:</p>
<input type="text" value="ei3i6..." style="font-family:AiPaiNunavik">
</body>
</html>
and opend within this same browser session in another tab.
In my current browser session, I see two different renditions of the string:
- on this support form submission page, the string is incorrectly displayed (with two squares) as on the webpage which is currently under development
- in another tab, the above mentioned HTML file displays all instances of the string correctly.(A) is what I see on this webpage (Firefox support form submission page)
(B) is what I see within the same browser instance in another tab, viewing the above HMTL code
(C) is what happens on the webpage under development.
A and C show the same strange behaviour.
Opera, Safari on Windows and IE display it correctly.
Thanks for any hints, -
Search help unavailable in Read-only input field since EHP4
Dear Experts!
I have a problem with a Portal page since the deploy of the EHP4. The page has standard input fields with Search Helps. I needed to have the input field non-modifiable so the user would have to use the search help to get the proper information.
Prior to the EHP4 installation, I set the input field to Read Only in the WebDynpro explorer, this disabled the editing while permitting the user to use the Search Help.
Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
Do you know if there is a way to allow the search help on a read only field?
Thanks so much for your answer,
Brian Foster.>Since the installation, the search help is no longer visible or accessible on a Read Only standard inputfield.
This was a conscious design decision on SAP's part that disabled or read-only fields should no longer fire value help. I am aware that this situation was used in the past as you describe. It is even still used in SE80 for the Web Dynpro ABAP wizards. However usability studies showed that this often confused end users and therefore it is no longer allowed. The field must be input enabled to fire the attached serach help. -
How to do validation of input fields
Hi all,
I have a rquirement to do the validation of input fields.Can anybody explain me how to go for that???Please explain in detail.U can also give me a link where i can find the tutorial for doing this.Hi Amit,
What everyone has said above is correct - in the method of your action simply test for whatever condition you need to validate for. However, the following tutorial shows you how to use Web Dynpro's Message Manager to display the messages on the screen in an easy user-friendly way:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/wd%20java/wd%20tutorials/a%20simple%20input%20form%20with%20message%20and%20error%20service%20support.pdf">Enabling Message and Error Support</a>
In addition, there are some validations that are done automatically depending on what you have your input fields set to - for instance, if you bind your input field to a date and a user enters words into the field instead of an actual date, it will automatically display an error message. To learn how to turn this feature on and off, see this tutorial
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/edf6ea90-0201-0010-7696-a68662381c12">Using Validating and Non-Validating Actions</a> -
Update non-editable field Start date which is calculated from other context
I had created some custom date fields(model, bol entity) in component ICCMP_BTSHEAD. We are calculating Start date based on the new input value into receiving date in the other context node.
so, for this i get the value on controller class(_IMPL). and pass the same value in the GET method of Start date.
But, Problem is Start date is the non-editable field so SET method will not be trigger as expected. so the same i used the DO_PREPARE_OUTPUT method but it's called and update the value when we press the enter. IF directly we click on the "SAVE" button then it' trigger but value is not updating in the database.
Please, find the below piece of code for the same. can u please anybody help me that how can i achieve this requirement.
DATA: l_recieve_date TYPE crmt_date_timestamp_from,
lr_current TYPE REF TO cl_bsp_wd_mixed_node,
lr_col TYPE REF TO cl_bsp_wd_collection_wrapper.
DATA: lv_date TYPE d,
lv_time TYPE t,
lv_date_temp TYPE sydatum.
IF iv_first_time EQ abap_false. "avoid for first tile load
Read the value of btreceivedate-TIMESTAMP_FROM.
lr_col = me->ztyped_context->btreceivedate->get_collection_wrapper( ).
IF lr_col IS BOUND.
lr_current ?= lr_col->get_current( ).
IF lr_current IS BOUND.
lr_current->if_bol_bo_property_access~get_property_as_value( EXPORTING iv_attr_name = 'TIMESTAMP_FROM'
IMPORTING ev_result = l_recieve_date ).
ENDIF.
ENDIF.
IF l_recieve_date IS NOT INITIAL.
CONVERT TIME STAMP l_recieve_date TIME ZONE sy-zonlo
INTO DATE lv_date TIME lv_time.
Check day is working day - if not, correct to previous working day
IF lv_date IS NOT INITIAL.
lv_date_temp = lv_date.
CALL FUNCTION 'DATE_CONVERT_TO_FACTORYDATE'
EXPORTING
correct_option = '-'
date = lv_date
factory_calendar_id = 'GB'
IMPORTING
date = lv_date_temp
EXCEPTIONS
date_after_range = 1
date_before_range = 2.
IF sy-subrc IS INITIAL.
lv_date = lv_date_temp.
ENDIF.
ENDIF.
CONVERT DATE lv_date TIME lv_time
INTO TIME STAMP l_recieve_date TIME ZONE sy-zonlo.
ENDIF.
lr_col = me->ztyped_context->btstart->get_collection_wrapper( ).
IF lr_col IS BOUND.
lr_current ?= lr_col->get_current( ).
IF lr_current IS BOUND.
lr_current->if_bol_bo_property_access~set_property(
iv_attr_name = 'APPT_TYPE' "#EC NOTEXT
iv_value = 'ZSTWTIME0001' ).
lr_current->if_bol_bo_property_access~set_property(
iv_attr_name = 'TIMESTAMP_FROM' "#EC NOTEXT
iv_value = l_recieve_date ).
ENDIF.
ENDIF.
ENDIF.
could you please help me?Hi,
Thanks for your reply,
yes, i checked the same thing also. But DO_HANDLE_DATA is called before the SET method of receiving date and in that case we are getting the old value in DO_HANDLE _DATA and source and Target fields both are not updating.
I checked, if, i'll change the input field then set method of input field and then EH_ON_SAVE is called directly.
i think, if i'll do the same modification in the EH_ON_SAVE method as i did in the DO_PREPARE_OUTPUT then it can be updated but i don't want to change the EH_ON_SAVE at this moment.
is there any other way to update the START DATE(Display mode in the screen) which is calculate from the other context node field receiving date. -
How to restrict the user to enter only numeric values in a input field
How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAPHi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit -
How do I get a value from a portal form for a non database field ? HELP!!
I have a form based off of a table that I added a field to. The form is to allow the user to change abbreviation for a
department field ie. BIO to BIOL. for a biology department. I have a pl/sql procedure for validation using the custom option
on the update button to verify the user and update the data. I have tested to code at the sql prompt and it works.
They only difference between the prompt and the form is the non-database field new_dept_abbr was added to the
form. I don't know how to capture the value of the user input into a variable that can be used in the pl/sql.
Any help would be appreciated.
I have tried this approach
v_new_dept_abbr := p_session.get_value_as_varchar2(
p_block_name => 'default',
p_attribute_name => 'new_dept_abbr'
have tried using p_attribute_name as 'a_new_dept_abbr' but this does work and does not exist in the body of the form.
Have also tried setting the p_block_name to _session - still doesn't work.
Any ideas??
Thanks
Debbie BrennanThanks for the info. I tried that and it still doesn't pull the value. I have opened a TAR via metalink, but I'm not getting any
satisfactory answers. I ran across an note - 137172.1 that has this snippet of information in it.
Unfortunately, at this time (portal 3.0.7.6.2) , a non-table item cannot be
referenced in a plsql event handler, only in client side JavaScript code. This
is a known limitation and will be fixed in a future release.
I don't know how to get the value from the client side JavaScript code to a pl/sql variable. Do you?
I've been trying to get them to tell me if the 'known issue' has been addressed in 3.0.9.
I'll keep at it. Thanks so much for your suggestion I appreciate it.
Deb -
How to enable/disable the input fields based on the data entered/user action in the web dynpro abap?
How to enable/disable the input fields based on the data entered in the web dynpro application abap? If the user enters data in one input field then only the next input field should be enabled else it should be in disabled state. Please guide.
Hi,
Try this code.
First create a attribute with the name readonly of type wdy_boolean and bind it read_only property of input field of which is you want to enable or disable.
Next go to Init method.
Set the readonly value as 'X'.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = 'X').
After that Go to the Action ENTER.
First read the input field ( first input field, which is value entered field) , next give a condition
if input value is not initial then set the readonly value is ' '.
DATA lo_nd_input TYPE REF TO if_wd_context_node.
DATA lo_el_input TYPE REF TO if_wd_context_element.
DATA ls_input TYPE wd_this->element_input.
DATA lv_vbeln TYPE wd_this->element_input-vbeln.
* navigate from <CONTEXT> to <INPUT> via lead selection
lo_nd_input = wd_context->get_child_node( name = wd_this->wdctx_input ).
* @TODO handle non existant child
* IF lo_nd_input IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_input = lo_nd_input->get_element( ).
* @TODO handle not set lead selection
IF lo_el_input IS INITIAL.
ENDIF.
* get single attribute
lo_el_input->get_attribute(
EXPORTING
name = `VBELN`
IMPORTING
value = lv_vbeln ).
if lv_vbeln IS not INITIAL.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->element_context.
DATA lv_visible TYPE wd_this->element_context-visible.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
* @TODO handle not set lead selection
IF lo_el_context IS INITIAL.
ENDIF.
* @TODO fill attribute
* lv_visible = 1.
* set single attribute
lo_el_context->set_attribute(
name = `READONLY`
value = ' ' ).
Maybe you are looking for
-
I am trying to do a clean install MacBook Pro
I am trying to do a clean install on my Dad's older MackBook Pro. He downloads things he shouldn't and after frustrations trying to wipe ou trojans and bad files I just decided that the only way to make this thing work again is to clean install it. I
-
Iphoto crashes when trying to open with the existing db
Hi there, iPhoto keeps crashing when i try to launch it with the existing db. I can open it with a new db but am not sure how I can get the old one working. I love using iPhoto with all the events, faces and other features. Is there a way to get all
-
HT201178 how do you unpair an apple wireless keyboard?
I have an apple wireless keyboard, but I recently just purchased and apple keyboard with numeric keypad and I am wondering if I need to unpair the apple wireless keyboard from bluetooth or I dont know but, my new keyboard is wired so it should work a
-
Creating fonts based on pixels size
Hi i'am still a java beginner and i am switching from .NET so anyone can help on how can I create a font based on Pixels size rather than Point Size
-
I have an iPad 1st Generation Wi-Fi + 3G but my network is Verizon. I would just like to use it when in Istanbul to check and send email to the US and to Skype. Is this possible? Do I need to enable or disable anything to use it, or just turn it on