PA-OM Integration with Batch Program

Hi,
Can anybody tell me whether the PA-OM Integration works with a Batch Report or not? If I'm creating Cost center for a Position in OM side using TCode: PP03, it is getting reflected in PA side. But, when I'm Running a Report for the same purpose, though the Cost center is getting created in OM side, but it's not reflecting in PA side. Regarding the Integration Settings, everything seems to be fine. Any Idea, why this not happening with my Report?
Thanks for your help,
HR_Guy.

Hi Guys,
             I'm running a Custom Report. Generally, If I find any Employee with wrong Cost Center in either PA or OM side, I used to run the RHINTE (10 or 20) Reports accordingly. My Custom Report runs on a nightly basis and Loads Objects and Relationships in OM side by picking-up the data from a Legacy System. And the Report is using the Transaction Code PP03 for creating these Relationships (Position to Cost Center) with either Call Transaction or BDC process. It is successful in doing so. But this change is not getting reflected in PA side as it will reflect on PA side immediately when I do it Online. So, I cannot run either RHINTE10 or RHINTE30 Reports on a regular bais to serve my purpose. I even checked all the Integration Settings in T77S0 Table and everything seems to be fine. Any idea, why it is failing? Please help me out in this Issue.
Any kind of help would be highly apprteciated,
Thanks for your Support,
HR_Guy.
Message was edited by:
        HR_Guy
Message was edited by:
        HR_Guy

Similar Messages

Batch program with COR1

Hi :
I want to create a batch program using call transaction for process order COR1.
I need an example for this, by creating a recording " shbd " using COR1.
Thanks.
Rag

hi,
Go to SHDB transaction.
Enter New Recording nameand Transaction Name as 'COR1', start new Recording
You will get the First Screen: with Material No, Production Plant, Planning Plant,
PO type etc, Enter the Mandatory fields, enter you will get the second screen , again enter the Mandatory fields in that SAVE the recording.
Then go to PROGRAM in the Menu.It will create a Program automatically.
Then You have to modify that program littlebit as per your requirements, similar to a common BDC program.
Hope this helps.
Regards,
Anji

Java batch program with wakeup

I am interested in developing a batch java program which will hopefully perform the following I need to know how to get started with a timed-event.
Application description:
I would like the java batch program to wakeup at 7:00 am each morning and read a database and fire an email with the resultset of the database query. I can handle the database query portion. I am looking for a solution for the wakeup at 7:00 am and the email.
Any direction would be helpfull.

Look up java.util.Timer, and java.util.TimerTask. It does exactly what you need in terms of a batch event running at 7:00am every morning. Alternatively, you can do it up as a simple program, and create a cron job.
As for e-mail, JavaMail isn't really that difficult. Look it up :)

RE: Legacy Integration with PI/Open

Greg -
We are currently working on wrappering the APIs for UniVerse (aka Pick on
UNIX).
We received some help from the guys at RTD in Denver.
We tested out a C program that uses the Universe APIs and it works fine.
We will be building the Forte piece and compiling it this week.
Our first application is to inquire the UniVerse data, after that is
successful, we will move to inserting & updating.
Let us know how we can help.
Larry McCartney
[email protected]
(203)459-7959 - Trumbull
From:
[email protected][SMTP:[email protected]
om]
Sent: Monday, October 12, 1998 11:00 AM
To: [email protected]
Subject: forte-users-digest V1 #1111
forte-users-digest Monday, 12 October 1998 Volume 01 : Number
1111
In this issue:
Legacy Integration with PI/Open
is OBB32.dll available
Java Integration
Java Integration
Re: Legacy Integration with PI/Open
RE: Forms That Will Not Close
RE: Forms That Will Not Close
RE: Forms That Will Not Close
Re: AfterValueChange event trigged when it shouldn't be...
math library
From: [email protected]
Date: Mon, 12 Oct 1998 09:49:56 +1000
Subject: Legacy Integration with PI/Open
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.
Thanks in advance for any help.
Greg Barber.
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you
received
this in error, please contact the sender and delete the material from any
computer.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "sridhar t" <[email protected]>
Date: Sun, 11 Oct 1998 22:01:36 PDT
Subject: is OBB32.dll available
hi,
am working on forte3.0.G.2. when i tried to use objectbroker library i
am unable to find the runtime objectbroker library (OBB32.dll). is this
dll available with this version. if not is there any alternative.
thanks,
sridhar,
Goldstone Softech USA
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:12:22 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: srinivasa gopi <[email protected]>
Date: Sun, 11 Oct 1998 23:26:26 -0700 (PDT)
Subject: Java Integration
Hello,
I'm trying to integrate Forti with Java in Java mode using IIOP.I
followed the steps as explained in the Forti Web enterprise manual.I
compiled the Java files that are generated by Forti along with the
client Java file.The Java applet is getting downloaded on the client
browser(IE 4.0), but the problem is browser is giving an exception
** Java.lang.RuntimeException can't connect to service object with
the ior file name **.
My question is on every client is it necessary for ORB(Visigenic for
Java 3.2) and also the Forti Java interoperability package that is
provided by the Forti for compatability with Java or it is not
required on the clients ?
Is there any other alternative to achieve the goal as this will give
wide access to the Forti service objects through Web Browser clients.
Please mail me the solution to this problem as early as possible it is
very urgent.
Thanks in advance,
Srinivasa Gopi,
Goldstone Softech USA
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Tim Hagemann <[email protected]>
Date: Mon, 12 Oct 1998 09:21:06 +0200
Subject: Re: Legacy Integration with PI/Open
Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have arequirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experiencein
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue isthat
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering
the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 09:38:25 +0200
Subject: RE: Forms That Will Not Close
Exiting the event loop will not close the window! Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
Hi,
We seem to be having some type of deadlock problem when trying to
close
forms and am wondering if anyone else has experienced this problem.
The
phenomenon does not always occur and is not specific to any one client
machine.
I will explain the phenomenon:
1. We have an object that contains our main application startup
method.
This method then instantiates our main application window (Control)
and
invokes the Display() method using start task.
2. All other forms created by the application are created using a form
manager service object which exists on the client partition. The form
manager has a CreateForm() method which instantiates a form class of
the
specified type and invoked the form's Display() method using start
task.
3. Each form has a Close push button which when clicked invokes
Window.RequestFinalize().
Now, the problem we have is this:
The user starts the application and the main application window is
displayed. The user then selects an option from the main window and a
child form is created using the form manager service object and is
displayed. The user can continue to create more child forms by
selecting
options from the main window and all child forms are instantiated and
displayed correctly.
However, when the user attempts to close one of the forms the form
does
not close. The finalize event is triggered and the event loop is
exited,
but the form continues to be displayed and does not close. If the user
then moves the mouse pointer over the main application window, the
child
form immediately closes. Moving the mouse cursor over other child
windows (or even the desktop) does NOT do this - only when the mouse
cursor is moved over the main window does the child form close.
Does anyone have any ideas on this?
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>- -
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Jason de Cean <[email protected]>
Date: Mon, 12 Oct 1998 17:47:20 +1000
Subject: RE: Forms That Will Not Close
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as well
Regards,
Jace.
On Monday, 12 October 1998 17:36, Rottier, Pascal
[SMTP:[email protected]] wrote:
Exiting the event loop will not close the window!
Invoking
'Close' method on the window will. Check if this method
is executed. It appears, the AfterFinalize event exits
the
event loop and nothing more. Then, your applications
waits for some event from your main window, like 'Mouse-
Enter', before invoking Window.Close().
Pascal
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: "Rottier, Pascal" <[email protected]>
Date: Mon, 12 Oct 1998 11:04:24 +0200
Subject: RE: Forms That Will Not Close
Jason,
No, self.Close() should close the window. This is the
method I referred to. You could place a traceline
behind self.Close() to see if it is executed. It is not
inconcievable some exception may exit the Display()
method before self.Close() is executed.
After that, maybe, some events from your main
window trigger something that causes a call like 'My-
Window.Close()', where 'MyWindow' is a subclass of
'UserWindow', so 'MyWindow' gets closed after all.
Maybe you've overridden 'Close()', so now it doesn't
work properly anymore.
Are you sure you exit the event loop after you press
the close button?? The display method is not regis-
terred for any <PushButton>.Click event, though maybe
you just didn't include the full Display method in your
mail.
Remember that an event loop will only respond to an
event if it is not currently handling an event. So, the
method behind <PushButton>.Click may call a self.
Window.RequestFinalize(), which will cause an After-
Finalize event to be posted, which will be placed in
the event queue. If this method however keeps waiting
for something, the event loop will not respond to the
AfterFinalize event, until this method is done waiting.
Pascal.
Hi Pascal,
The Display() method is as follows:
self.Open();
event loop
when Window.AfterFinalize do
exit;
when task.Shutdown do
exit;
end event;
self.Close();
<end>
Are you saying we should do a Window.Close() in there somewhere as
well
Regards,
Jace.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Thomas Kunst <[email protected]>
Date: Mon, 12 Oct 1998 14:28:55 +0200
Subject: Re: AfterValueChange event trigged when it shouldn't be...
Which version of Fort=E9 are you using? We had some strage problems with
GUI events in Fort=E9 3.0.F.2, which disappeared now that we use 3.0.J.1!=
Fouche, Jaco wrote:
=
Hi there,
=
I'm hoping that someone out there has experienced the following (and
knows why it is happening. ) :-)
=
I have a couple of windows on which the AfterValueChange event is
triggered on a field upon hitting the delete key.
We all know that this should only happen upon leaving the field, ie. th=e
field loosing focus. The problem is that I'm trying to recreate this in=
a simple test class, but now it won't happen. I still have the original=
windows on which it is happening, but I would like to construct
something small and simple to send to Forte.
=
Any ideas as to why this could be happening?
=- -- =
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
From: Greg Gorham <[email protected]>
Date: Mon, 12 Oct 1998 09:51:07 -0400
Subject: math library
I need direction to the source of Forte libs that handle more scientific
math. Also included is the need for more scientific print formating. I
understand, second hand, that such material is available from third
party vendors/sources.
Thanks
Greg Gorham
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
End of forte-users-digest V1 #1111
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Greg,
This is a bit of a long shot, but has anyone experience with integrating
Forte with PI/Open. PI/Open is a variant of PICK. We have a requirement
to read and update a PI/Open database from within our Forte application,
and we would be most interested to hear from anyone who has experience in
doing this.
We are aware of a set of APIs provided with PI/Open that are written in
"C". We could wrapper these from within Forte, however the issue is that
the APIs provided are non-shared, and Forte requires shared libraries.Would be interersting, which operating system you're using.
You could write a dll (on windows) or shared library (on unix) wrappering the
original,statically linked "C"-Libs. This lib could be used by Forte.
Tim Hagemann
Tim Hagemann
Ascom GmbH Email: [email protected]
Charlottenburger Allee 61 Phone: +49 241 96806 273
D-52068 Aachen Fax: +49 241 96806 225
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Having a few issues with several programs (tor / mpd / ccm..)

Hey everybody,
I'll arrange this post in 3 parts since I have 3 different kinds of "major" problems or questions .
1st ( tor - privoxy - polipo - iptables )
I somehow found this article in your wiki and therefore tried to get tor and privoxy up and running on my desktop machine, as this didn't work as I hoped it would I searched farther in the wiki and installed and configured (as far as I've thought of) polipo and iptables.
Now I've put all 4 of them in my rc.conf, but somehow some of my http connections don't seem to work in chromium while iptables is running (https works fine though [e.g. archwiki works, youtube doesn't]).
I did everything as suggested in the polipo wiki entry, meaning I changed my /etc/iptables/iptables.rules to
*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A OUTPUT -p tcp --dport 80 -m owner --uid-owner polipo -j ACCEPT
-A OUTPUT -p tcp --dport 80 -j REDIRECT --to-ports 8123
COMMIT
and removed all proxy settings from my browser - meaning all corresponding flags in the startcommand. I also added "forward / localhost:8123" to the privoxy config and changed the polipo configuration according to the wiki in order to work with tor (the socksParentProxy, socksProxyType part).
now the next problem - that might probably be related to the first - is that my privoxy doesn't load in daemon mode anymore.
I think it's since I've installed polipo that privoxy began to refuse starting together with the other daemons
[usR@machine ~]$ privoxy
Apr 23 00:20:56.459 b75086c0 Fatal error: can't check configuration file '/home/usR/config': No such file or directory
this is the output I get when I try to start privoxy in normal user mode from the terminal, when I try starting the daemon manually (/etc/rc.d/privoxy start) it says
touch: cannot touch `/var/log/privoxy/logfile': Permission denied
chgrp: cannot access `/var/log/privoxy/logfile': Permission denied
chmod: cannot access `/var/log/privoxy/logfile': Permission denied
touch: cannot touch `/var/log/privoxy/jarfile': Permission denied
chgrp: cannot access `/var/log/privoxy/jarfile': Permission denied
chmod: cannot access `/var/log/privoxy/jarfile': Permission denied
Apr 23 00:22:34.490 b76396c0 Fatal error: Cannot setgid(): Insufficient permissions.
[/var/log/privoxy belongs to privoxy:adm]
when I do the same in sudo mode it just fails without displaying an error message..
I added this code to the /etc/rc.d/privoxy executable but I still get this owner conflict error and I have no idea what might be causing it.
if [ ! -d /var/log/privoxy ]
then
mkdir /var/log/privoxy
touch /var/log/privoxy/errorfile
touch /var/log/privoxy/logfile
chown -R privoxy:adm /var/log/privoxy
fi
If the order of the daemons in rc.conf is of any real importance here a copy of my setup
( @polipo @privoxy @syslog-ng !set-hw-addr !iptables @network netfs hddtemp @crond hal dbus @alsa @slim @tor )
2nd ( mpd & mpc )
I'm just wondering if there's a way to output the position of a track in the current playlist combined with a search. since mpc search <type> <query> only prints out full file path and name, but not the position in the playlist so that you could play it with mpc play. I thought of a method to print out the whole list with mpc playlist and pipe this output into a listing program, than grep out the song I'm looking for all that in a little bash script, to replace mpc search.
Is there an integrated mpc search function that works the way I imageine it and my idea therefore redundant, or if not, is it realizable the way I picture it; does such a listing program exist?
3rd ( cairo-compmgr )
Since I'm already posting here I thought I'd mention my older problem which I still couldn't solve.
1st) I need to start cairo-compmgr(-git) in sudo mode to be able to edit any settings or activate the gui in any way. how do I automatically start the program on startup in sudo mode? I tried editing ~/.fluxbox/startup & ~/.fluxbox/init, even tried adding it in /etc/rc.d/ and /etc/rc.conf in order to start it as a daemon (lol, noob) but none of that worked properly obviously Any ideas? I don't want to start it manually and "waste" a terminal window for that every time I boot.
2nd) I can change opacity (transparency) in both versions only per hotkey, and when I do so the settings don't get saved, they even get reset to normal opacity as soon as another window gets selected. does anybody know if there's a config file or any way to save opacity settings for certain windows & programs, so that they automatically get loaded when cairo starts and stay applied until it gets closed?
[or generally: how do I configure the Plugins? ]
the last "problem" which occurs only with cairo-compmgr-git:
When I rightclick the ccm icon in the task bar and disable the composite desktop, the whole program kills itself oO
In the old version the option "Composite desktop"'s box just got un-checked and I could easily restart ccm by rightclicking the logo again and re-enabling the "Composite desktop" option.
Any clues on that by any chance?
I'm using Fluxbox by the way, if that's of any importance for any of the problems. hope I didn't forget any important information if so please remind me
Would be thankful for any kind of help
have a nice weekend
deF
//edit:
concernig the tor / privoxy problem, I managed getting all the daemons to start up at bootup again, my iptables situation remains the same though.
I went through all the config files again and played around with chown and chmod a little and for now the system is stable, everytime I reboot all the daemons start without any problems.
but when i start chromium with --proxy-server=localhost:8118 now, I get the following error message
The following error occurred while trying to access http://torcheck.xenobite.eu/index.php?:
504 Connect to torcheck.xenobite.eu:80 failed: SOCKS error: network unreachable
Generated Sat, 23 Apr 2011 04:49:08 CEST by Polipo on archzor.localdomain:8118.
notably with all programs running now, tor, polipo, privoxy (and by now dansguardian as well)..
I'm tired so I'll go asleep now, maybe I'll find something tomorrow in the logfiles or whatever, so far:
every kind of help is still very appreciated
²
/var/log/polipo/polipo.log
Disabling disk cache: No such file or directory
Couldn't bind: Address already in use
Couldn't establish listening socket: Address already in use
Couldn't bind: Address already in use
Last edited by deF291 (2011-04-23 03:13:48)

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

How is the integration with ECC in SRM 7.0??

Hi,
Working with SRM 5.0 or 5.5 the use of XI for integration with ECC is not mandatory because when we send any document from ECC to SRM like requisitions (to convert them in shopping cards) or when we send any document from SRM to ECC like shopping cards, PO´s, contracts, we only use the RFC´s and the abap programs.
Is the same behavior with SRM 7.0?????
Could the integration from SRM 7 with ECC 6 work with RFC´S without XI or for this vertions is XI mandatory?????
Thanks

SRM70 is closely integrated with XI for transferring docs between ECC and SRM. SAP introduces eSOA tech nology with SRM70 and hence all documents like PR from ECC to SRM, Central Contract from SRM to ECC, PO creation (Classic), etc uses this techn ology.
Thanks,
Jagadish

Preference calculation with batch management

Hi experts,
I am trying to find any documentation or manuals about how to set-up and use preference calculation in SAP-SD-FT or GTS based on batch management.
Does anyone of you know how to do it and use such kind of "standard"-SAP-solution or is customer-specific programming essential.
Any reply would be much appreciated.
Best regards,
Corinne

Hi Corinne,
Did you get anything for your requirement specific to Preference calculation with batch management. I am also looking for the same. let me know if you found something useful or if you created an enhancement to resolve this issue.
Regards,
Sumit

MDM catalog integration with SRM 7.0

Hi all,
We will be upgrading from SRM 5.0 to SRM 7.0
We currently have CCM .....Few questins on catalog enablement for us with SRM 7:
1.With SRM 7,0,can we use CCM oor MDM is the only option???
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
5.What are additional features in SRM MDM 3.0 catalog in contrast to CCM??
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
9. Where can I find some sample catalog files for test upload?
10.What are the lastest SP for MDM available for integration with SRM 7.0??
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
I have gone through the help links but wud like ansers to above ques based on experiences of the forum members...Please provide inputs to my above queries if anybody has worked on MDM catalog integration with SRM 7.0....
Thanks for your time.

HI,
1.With SRM 7,0,can we use CCM oor MDM is the only option???
   You can use any catalogs which support SAP OCI interface.
2.Is it better to have MDM as a seperate server and enable SRM MDM catalog content?
   MDM Server(contents) and AS Java(for UI) are required. Please check the installation guide.
3.We have 2 punch out catalogs for 2 vendors.How to enable the punch out catalog links in SRM 7.0???What is the path for IMG config??
   Same as SRM 5.0. Define External Web Services.
4. We have around 20 internal supplier catalogs .Now should we upload few of the supplier catalogs and then upload rest or can we upload all the suuplier catalogs at once through IMPORT MANAGER in MDM ???What are therestrictions in terms of the no of catalogs or catalog data that can be improted and mapped ???
Yes. You can use Import Manager. No issues.
6.The backend master data such as Supplier/Porg etc.....how is that synchronised from SRM to SRM MDM catalog???Is it through some scheduled programs???
MDM Extractor is available.
7.What is the use of PI/XI in enabling SRM MDM catalog??Why is it mandatory??
Mainly for contents mapping.
8. What are the allowed file types for cataog data upload in MDM???Like it was CSV in CCM...
Any. Even for DB interface is also supported. You see all options when you run import manager.
9. Where can I find some sample catalog files for test upload?
Sample repository definition is delivered. You can manually create 1 entry by Data Manager.
10.What are the lastest SP for MDM available for integration with SRM 7.0??
You can find it SAP Service Marketplace. http://service.sap.com/swdc
11. after price changes from supplier(thru negotiation),are these price changes to be updated manually for indiavidual items/products through MDM data manager or is there any way to automate this delta update for price in MDM???
You can use contract and contract items are transfered to Catalog.
12.Also maintaining catalog data in MDM for SRM procurement will be a seprate actibity just like maintaing catalog in CCM??
Yes. Catalog is just Catalog.
Regards,
Masa

Internet Download Manager cannot integration with firefox4 itis Look in the menus it works but it does not actually work ?

internet Download Manager cannot integration with firefox4 its Look in the menus it works but it does not actually work

IDM may need to be updated to work with Firefox 4.0. You could contact them and make them aware of the problems you are having with their program.

Brief discussion on SAP XI and its' Integration with SAP MDM.

Hi,
I have never worked on SAP XI.
I am discussing it on brief, please give your valuable replies.
SAP XI consists of System Landascape Directory(SLD).
SLD Consists of Business System and Techinical System.
Technical System contains all information about the software
component. The Business System consists of Inbound and Outbound Business
System which are used as logical names for data transfer.
There is communication Channel for Receiver and Sender Business System and n agreement
is signed between Sender and Receiver.
Outbound Interface defined for Business System Outbound and Techical System associated
with the Business System,
Inbound Interface defined for Business System Inbound and Techical System associated
with the Business System.
In SAP NetWeaver XI Integration Directory, we have defined the Integration Scenarios,
Actions, Interface Objects, Mapping Objects, Adapters Objects.
Mapping Object defines the Structure and Value Mapping.
Adapter Objects defines the Adapter program which implements RFC Adapter, FTP Adapter logic.
FTP Adapter is used for XI-MDM Communication.
RFC Adapter is used for XI-ECC Communication.
Integration Repository: Both Outbound and Inbound Interfaces are Mapped with Value mapping and
Structure Mapping inside Integration Repository.
The File Adapter takes the File from the Outbound port of MDM System
and sends it as IDOC to Receiver Business System.
Value Mapping must be done between Sender and Receiver interfaces.
Value Mapping is done by XSLT or Java based program.
SAP NetWeaver XI Integration Server at runtime:
Message Split, Interface Determination, Receiver Identifaction, Mapping, Techincal Routing
and Call Adapter Proccess are done.
In SAP XI 3.0 and MDM 5.5:
Step 1: Create busines system as service.
Step 2: Create communication channel for each business service. If the system can communicate
through different channels, then create all possible channel types if necessary.
Step 3: Create receiver agreement between the systems.
Step 4: Interface determination:
- Here you see for the first time the software component mentioned;
there are some special requirements regarding this software component in relation to the customizing ID mapping.
- To modify this software component, the customer needs to copy the SAP standard delivered software component
into its own namespace. The customer is able to modify to create archives
for the customized ID mapping.
Receiver determination.
Configure an FTP Server on the MDS.
Create a send folder for outbound messages using outbound port(s) for
remote systems(s).
Create receive folder inbound messages using inbound port(s) for remote systems.
This ia all about concept of SAP XI Infractsture and its' Integration with SAP MDM 5.5.
Regards
Kaushik Banerjee

Hi Kaushik,
You must be aware of File types that MDM Import Manager can Import i.e. we have XML, Excel etc. Now there are two transactions to extract data from R3
1. MDMGX -
         - For lookup table extraction
         - Output in XML format which MDM can import without using XI.
          - FTP can be configured to put the file in the desired folder which will be then picked by Import Server.
2. MDM_CLNT_EXTR -
          - For Main table records.
          - Output is in Idoc format which MDM doesn't understand hence we need XI in between which converts Idoc file received from R3 into XML which can then be imported using Import Manager or Import Server. For this we need to implement XI Scenario that consists of Source System, Receiver System, Type of Data etc.
Just a basic understanding...
Regards,
Jitesh Talreja

I do not want integration with IOS or iCloud

Hello,
I have a late 2010 27 inch iMac and a first generation iPad.
I foolishly installed Mountain Lion when it came out and have become increasingly frustrated and irritated with the emphasis on iCloud (I did not install that) and integration with IOS.
I do not like the way Safari operates in this OS nor the alterations to mail and other applications.
It seems to be very difficult to revert to Snow Leopard which is what I would prefer to do.
It also seems that Apple does not understand that some users just want to use a computer in the traditional way and have no interest in social networks or in integrating devices.
I have been using computers for 25 years and do know what I need.
Does anyone have a simple solution to reverting to Snow Leopard and ignoring these latest developments?
Everyone is urged to back up with Time Machine which is what I have always done - to an external drive. However, it seems this is useless when wanting to revert to SL as I do so that was a waste of time too.
Joan

These programs will make a clone.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

To generate a wsdl using JAX-WS in JBOSS with java program but without EJB

Hi,
I am using JAX-WS to generate webservices using JBOSS application server by writing a java program.
My sample java program includes :which takes an i/p name as string and displays out put as "Hello name",with the use of annotations.And,also have written web.xml for it.If I start JBOSS without adding project to it,it is starting.BUt If I add project to it the server is not publishing.Its getting like:"publishing JBOSS 4.2.2....:waiting for virtual machine to exit".
I have followed the link:*http://www.javabeat.net/articles/2007/10/creating-webservice-using-jboss-and-eclipse/3*
to do this,where in it was given that by means of auto build process of eclipse IDE war file generates in default jboss folder.But which is not happening,so that,am unable to generate wsdl file..
Can any body help me?
1) why jboss is not publishing after adding project to it?
2) why war file is not generating in the default jboss folder?
Regards....

Yeah sure!!
Overall picture: I wish to expose my OSB services to the third parties using OCSG. For that I've created the Communication services corresponding to each OSB service.
Problem: Integration with the OSB.
At the OSB side I've got JMS queues which interacts with other existing systems in my SOA enviornment. But I'm not getting how to get the OCSG application- triggered request messages in that queue? Please help.
Also I've read about the SOA facades for integration with OSB.Which of the two approaches you will suggest?

Telephony Integration with WD4A

Hi experts,
I am currently investigating the feasability of re-writing and updating our 3rd party direct order entry system using Web Dynpro for Abap. One of the features of our current system written in visual basic is the telephone integration, ie incoming call details pop up on screen, interrupting the program and starting a new process.
I have been investigating how to achieve this through the events framework of WD4A applications. Ideally I would like to subscribe to an 'incoming call' event which will trigger upon recieving a call. Whilst looking through sdn and help pages I have found a lot of information on ICI, ANI and such but nothing yet on how I might actually implement a system described above.
Has anyone attempted such a scenario within WD4A or can suggest how such a result might be achieved?

There are a number of ISV solutions available for CTI integration with Dynamics CRM, such as
mscrm-addons and c360. Beyond those, there are a number of VoIP providers that offer a Dynamics CRM CTI integration, such as
Cisco, Genesys, and Avaya. Finally, Microsoft has released their own Customer Care Accelerator:
http://dynamics-crm.pinpoint.microsoft.com/en-US/applications/customer-care-accelerator-for-microsoft-dynamics-crm-2011-12884914795
--Dodd

Weighing Scale integration with SAP ( Packing Station)

Hi All,
    We need to have our Weighing Scales integrated with SAP to capture the READINGS for parcels / cartons / shipments automatically.
    I observe there is a provision for maintaining RFC connection , Scale Checkbox etc in SPRO--->Logistics Exec ---> Packing --->Set profile for packing w.r.t HUPAST tcode ...
    Would you plz help me with some work-arounds ...???
Regards
Jamna

Hi Folks,
    There is XMI technology available that can be potentially leveraged for this type of requirements in integrating any electronic gadgets talking to SAP ....
I think SAP XMI will be vry useful for this.
XMI is having ability to capture real time data from other system and update accordingly.
It has have connectors which will capture values from other system and pull in SAP.
How to Integrage Weigh Scale with OPC server via xMII 12.0
Hello Experts,
I am new to xMII. We want to integrate shop floor weigh scale into SAP PI Sheet to read the value from weight scale into PI Sheet. We have the infrastructure Ohaus weigh scale, xMII 12.0, SAP ERP 4.70, Kepware OPC Server, installed xMII framework for UDS and UDS 4.0. We are able to integrate the OPC Data tags into SAP PI Sheet successfully. But we need help to integrate weight scale with OPC server to read the scale value into OPC data tag.
Can any one give the steps to integrate weight scale with OPC server?
with best regards
K. Mohan Reddy
I know someone who have developed few applications on integrating weighing machines with R/3.
By: | 04 Dec 2008
i am working as a ABAPer in my company and developed DLL in VB6 on integrating weighing machines with R/3.
implemented and working in more than 10 sites.
By: | 12 Dec 2008
ERP-Scale from Pocket Programs provides a standardized u201Cplug & playu201D interface for weighing equipment. It is SAP Certified and can be used for integration of weigh-scales with the SAP Packing Station transaction (HUPAST) or with custom ABAP developments. Major international companies are already gaining benefit by implementing ERP-Scale in their plants worldwide.
By: | 04 Feb 2009
Re: Custom development for UDS
What have to say folks about the possibilities with the above ? But shouldnt SAP have some standard FM / RFC / BAPI owefully facilitating the same???
But the available FM HU_GET_RFC_DATA doesnt have any documentations attached to it ?
Regards
Jamna

ISE integration with Mobile Device Management ( MDM ) help required

Dear Techies,
     Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
     We are conduction a Proof Of Concept (PoC) on Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
Setup Brief :
=========
      Our Setup has ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
     Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
Activity Brief:
=========
     As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
Clarifications Required
================
Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
Wireless Scenario
MDM can be integrated to ISE ?
How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
Is MDM will do client provisioning or ISE should do ?
Is MDM send or update patches of Mobile Devices ?
As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
Thanks for Reading...
Arun

I would like to avail your valuable inputs to understand on the Client provisioning part for the Mobile Devices/ Laptop. I understand from your reply that MDM integration is not available in the current release ISE 1.1 - That is correct.
Kindly let me know your views or any documents on the following scenarios with the current release in mind
1. User with Mobile devices connecting to Wireless ( both Employee and Guest ) , How the Flow differs for the Employee and Guest. How the client provisioning is done ( i.e. Like Posturing or Compliance Check ).
The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
2. User with Laptop connecting to Wireless ( both Employee and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
3. What are advantages of having ISE also in place for Mobile devices, since most of the Mobile related tasks ( like Authentication, Authorization, Profiling and Posture ) are carried out by MDM. I am checking for the significant advantage of having ISE for Client network having only Mobile devices. Kindly clarify.
Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user authentication as Open ?
For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
6. We are also looking for VDI ( Citrix, VMware ) solution for the client ( both Employee and Guest ) , how ISE can play a role in securing the VDI environment.
For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
7. Is that any integration required with Citrix or VMware. How the VDI can be offered based on the User role ( i.e. Employee, Contractor or Guest ), since Guest database is available only with ISE, how the checks are made from the VDI environment.
IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
Our solution demands MDM in the integrated solution, As on today ISE cant be integrated with MDM. so what kind of solution we can propose to have MDM and Cisco ISE .Do the clients now enter the network should have already installed the MDM agent (or) any other way of pushing the same to the Client.
Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
Thanks,
Tarik Admani
*Please rate helpful posts*

PA-OM Integration with Batch Program

Similar Messages

Maybe you are looking for