PA Top-Down budget integration with GL

Dear Folks,
I want to apply the top-down budget integration between PA and GL to my client, i would like to know the setups steps and pre-requists needed to be made to apply this methodology.
Thank you in advance.
Best Regads,

Hi
You may review Oracle's documentation -
Oracle Projects Implementation Guide (PAIG).
On page 6-42 read the implementation steps for - Implementing Budget Integration
Dina

Similar Messages

Top-down web service approach with 10.1.2

We are trying to develop a web service using the top-down approach (from WSDL to Java) in Oracle App Server 10.1.2. The how-to´s we have found use wsa.jar, but this jar is not available in 10.1.2 (it comes with 10.1.3)...
Can the top-down approach be used in 10.1.2 ?
How ?
Thanks in advance
Fer

Hello,
The OracleAS Web Service stack in 10.1.2 does not support the Top Down generation of Web services (generation of the WS from a WSDL).
Can you move to 10.1.3, if not one migration path is the following, you do use Apache Axis in 10.1.2 to create topodown WS and when moving in 10.1.3 you will be migrating your Axis to the OracleAS Web Service 10.1.3 stack.
Regards
Tugdual Grall

SRM 7.0 for Public Sector integrated with FM (Budget Control System)

Hello!
I'm starting an implementation project of ERP 6.0 and SRM 7.0 for Public Sector.
It would be necesary the integration not only SRM with ERP but with FM (Fund Management), with BCS (Budget Control System) specifically.
Is it possible? has anyone experience on it?
Thks so much in advance and best regards!
Marcela.-

Hi,
Certainly... If you have FM implemented in your project, you will have to make integration with SRM.
I did it some 3 years ago and it was quite problematic (a lot of notes were created by SAP on this matter, also as initiative from our project), but since then, I assume, it should not pose specific problems.
Regards,
Eli

How to work in RH9 when project is integrated with TFS and TFS server is down

My RoboHelp 9 project is integrated with TFS/Visual Studio. The server went down yesterday and won't be back up until late today.
If I open the project locally (rather than from Version Control), how do I eventually get the latest files (those that I've worked on locally) into Version Control?
Thank you.

Hi,
I use the following method:
1.       Open the project and disconnect from source control.
2.       Modify any files you need. Be aware that when you add/rename/remove/move files, the RoboHelp control files are modified too. (.apj and .fpj)
3.       When TFS is up, check out the files using team explorer. Do NOT overwrite local files. (Make a backup first.)
4.       Using TFS, check in all modified files. Do NOT check in the XPJ file. If you do, the project will lose its connection with source control.
5.       Thrash the local project.
6.       Get the latest version from the server.
Be aware that this requires that you know what you’re doing. Especially when control files are modified. When you only modify the content of existing topics and check the existing topic in, you should be fine.
Greet,
Willam

Need help with tree edit distance and restricted top-down mapping algorithm

*This topic was posted a while ago in "java programming" section but was suggested to try here
Hi everyone,
A couple of days ago I posted a topic on analyzing structure similarity between two web pages. After some researching, I know I need to work out some tree matching algorithms: tree edit distance algorithm(TED) and a improved version: restricted top-down mapping algorithm(RTDM). TED is about calculating the minimum operation cost(insert, delete, replace) to map one tree into another. RTDM further restricts the 3 operations to only the leaf nodes so as to improve time complexity.
This is the general idea but I'm having difficulties to find resources to let me understand and implement the algorithms. I'm using ACM portal (Association for Computing Machinery) to access the technical papers but I find that they do not provide enough info, google gives mostly the same technical papers and some websites which illustrate the general idea of these algorithms.
Hoping that you can give me some guidance on these 2 algorithms. Not looking for codes but I need more details on them. Thanks in advance.

For scientific research I prefer Scirus: http://www.scirus.com/
Just two pages I found on a quick search:
http://arxiv.org/abs/cs/0604037
http://www.cs.uic.edu/~yzhai/
The latter might not be exactly what you asked for, but you might be interested in the listed publications. I have not taken a closer look.

PCA Integration with COPA

Hi Gurus,
I need some document on PCA Integratiion with COPA.
This is urgent.
Thanks in advance
Surya

There is no PCA integration with COPA. Both PCA and COPA are basically receivers and do not pass on data to other modules.
Hence, any assessment / distributions you do in PCA is not reflected in COPA and similarly any top down distributions you do in COPA will not be reflected in PCA.
Both PCA and COPA receive data from the source module simulatneously. e.g. if you are doing an assessment of CC balances to COPA, it updates PCA and COPA simultaneously.
Praveen.

How can I organize a 16 site broschure in landscape DIN lang format? You reed this broschure top-down!

I tried to create a broschure with 16 sites. Open format of one site is 210x210 Closed format is 210x99. I tried a lot but I beleave Indesign accept only to organise the printarea from left to right. But I need a top-down site oranisation.
I hope anyone know the answer.
Thank in advanced

You have to set up your brochure in portrait!
You can rotate the view on screen of your spreads in 90° steps during your work. Only one problem remains, the baseline grid is not rotated, but you can use a frame based baseline grid which can be rotated, you can save this baseline grid in object styles.
Your measures are wrong: Your pages have to have w x h 105mm x 210mm.
99mm x 210mm is the Zick-Zack-fold from a DIN A4 which is 297/3mm x 210mm, this would be wrong here.

SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

we have SSRS 2012 report integrated with SharePoint 2013 , when we click on any toggle item after some idle time of 60 secs and try again to expand
another toggle item then complete report is getting refreshed and if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
level.
what we observed.
1. there is no problem when we expand toggle items without any idle time.
2. when we open the report and expand few toggles and keep idle for 60 seconds and try
again to expand another toggle item then complete report is getting refreshed (all toggle items are collapsing).
3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
items it is not refreshing.
why it is happening and how to stop that complete refresh.
Surendra Thota

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Error while running SSRS 2012 report integrated with SharePoint 2013

Hi,
Our reporting services environment has SSRS 2012 integrated with SharePoint 2013. The SharePoint 2013 farm has 2 web front ends, 1 app server and a separate server for reporting services i.e SSRS 2012 .
We have created a https web application in SharePoint 2013 and all the SSRS 2012 reports are deployed into a "Report Library" residing in its root site collection.
The simple reports are running well. But there is a report where we have 3 multi-value parameters. On running this report in IE or Chrome, we get the error "Sys.WebForms.PageRequestManagerParserErrorException: The message received from the
server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'."
Some of the forums suggested to add the below entry in the web config of the SharePoint web app where the SSRS reports are deployed. We did that too, still the error is appearing. Please can anyone help .
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="100000" />
</appSettings>
Thanks

Hi Surendra,
I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
Please reference to the setting below to don't limit the timeout values if you got the report reloading:
Point to a report in the library.
Click the down arrow, and select Manage processing options.
In Processing Time-out, select Do not time out report processing or
Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
If you got the session timeout that refresh the page, please reference to the setting in below article:
http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
Details information in the article below about the timeout setting for your reference:
Set Processing Options (Reporting Services in SharePoint Integrated Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Get error while Integrating with Oracle's Enterprise User Security

Hi,
I am trying to create an Oracle Enterprise User integrating with OVD and MS Active Directory.
I am following all the steps in Integrating with Oracle's Enterprise User Security.
In the documentation section: "Configuring Oracle Virtual Directory for the Integration"
I have applied the steps successfully until:
Update and load the entries into the Local Store Adapters by performing the following steps:
I have successfully extended the Oracle Virtual Directory schema with the loadOVD.ldif
However I am getting errors in the next step: Update realmRoot.ldif to use your namespaces
The next step states the following:
Update realmRoot.ldif to use your namespaces, including the dn, dc, o, orclsubscriberfullname,
and memberurl attributes in the file. If you have a DN mapping between Active Directory and
Oracle Virtual Directory, use the DN that you see from Oracle Virtual Directory.
The realmRoot.ldif file is located in ORACLE_VIRTUAL_DIRECTORY_HOME/eus,
where ORACLE_VIRTUAL_DIRECTORY_HOME represents the location where Oracle Virtual Directory is installed.
The realmRoot.ldif file contains core entries in the directory namespace that Enterprise User Security queries. The realmRoot.ldif file also contains the dynamic group that contains the registered Enterprise User Security databases to allow secured access to sensitive Enterprise User Security related attributes, like the user's Enterprise User Security hashed password attribute.
Load your domain root information in the realmRoot.ldif file into Oracle Virtual Directory using the following command:
ldapmodify -h Oracle_Virtual_Directory_Host –p OVD_Port -D cn=admin -w Admin_Password -v -a –f realmRoot.ldif
When I run the ldapmodify command I get the following error:
add dc:
testldap
add objectclass:
top
domain
domainDNS
adding new entry DC=testldap,DC=local
ldap_add: Operations error
ldap_add: additional info: LDAP Error 1 : null
The actual realmRoot.ldif looks like this:
# Please uncomment the following one line if you are importing this
# LDIF file via OVD Manager or OVD Server's ldapmodify tool.
#version: 1
#dn: dc=com
#dc: com
#objectclass: domain
dn: DC=testldap,DC=local
changetype: add
dc: testldap
#o: subarashii
objectclass: top
objectclass: domain
objectclass: domainDNS
#objectclass: orclSubscriber
#orclsubscriberfullname: subarashii
#orclVersion: 90400
# If your domain structure has more layers than dc=subarashii,dc=com,
# for example, it's dc=us,dc=subarashii,dc=com, you will need to load
# the following ldif entry/entries too.
# Uncomment out the following, if required.
#dn: dc=us,dc=subarashii,dc=com
#orclversion: 90400
#orclsubscriberfullname: us
#objectclass: domain
#objectclass: top
#objectclass: orclSubscriber
#dc: us
# Adding EUSDBGroup entry
# Modify the memberurl attribute and replace it with your own domain name
#dn: cn=EUSDBGROUP,dc=subarashii,dc=com
#cn: EUSDBGROUP
#memberurl:ldap:///dc=subarashii,dc=com??sub?(&(objectclass=orclService)(objectclass=orclDBServer))
#objectclass:groupofuniquenames
#objectclass:groupofurls
#objectclass:top

Did you ever get your questions answered about the realmRoot.ldif file? Did you manage to configure a successful integration of OVD with EUS? I am battling with trying to get Oracle Virtual Directory integrated with Enterprise User Security, but every step I take in Chapter 7 of the OVD manual fails in some way, and the instructions are often vague. I am not sure how to modify the realmRoot.ldif file. Is there any improved documentation on this? I have logged a Service Request, but not getting any help. Any resources or documentation you know of that provides better guidance would be much appreciated. I am way behind my schedule now and this is a very frustrating exercise.
Thanks.

SAP R/3 integration with (Manual) Third-party App

Hi All
I am working on a scenario in which Third Party application has functionality which actually refines & correct the data upto the accuracy of 99%. So for this end-user needs to enter bit of information on their front-end then application will return the data on the basis of that information.
Now the problem has different parts -->
*) If I choose that SAP R/3 will initiate the ( Synchronous ) process then ABAPers raised the concern that they will not be able to display the response data on correct SAP screen also how to actually access the front-end of Third party.
Third-Party is ready to replace the Front-end with the web-service but then end-user will not be having the functionlity to select different options which is the strong part of Third-party application & also client is not agree to that.
Do you think I should use BPM in above solution with correlation on some field to identify the SAP screen.
*) If I choose Third Party application to initiate the ( Asynchronous ) process then again ABAPers raised the concern that how to display it on the correct SAP screen & how they know that data is coming at this point of time & they need to display it. Also Third Party said in this case they don't have expertise to customize their Front-end application & which will lead to additional cost to hire other developers.
Now can you suggest some good solutions for this kind of scenario in which an application needs the Manual intervention & needs to be integrated with SAP R/3. Also suggest from which direction I should initiate the process.
Thanks
- Lalit Chaudhary -

Matias
<<<< with front-end do you refer to SAP R/3 ?
No Matias with Front-End I meant Third Party is providing the web-page where end-user can enter the details & those will be refined & corrected by the Third-Party Application.
<<<<< Which ways has the Third-Party app to connect with (file, database, jms, etc.).
Third-Party App is providing Java Classes & Web-Services for integration but we don't want to access them directly, first of all we would like to invoke/access the Front-end application.
<<<< What is the purpose of this third-party app ? just to receive data, validate it and return it once it is corrected ?
Actually in this Front-end user can enter the data on given fields & data will be keep on refining while he is entering the more information into that given field. For e.g if the field says "City" & user enters "DE", a drop-down will come with all the cities in the world starting with "DE" like Delhi, Denmark etc.Once all the fields are populated with correct data user will click on "Submit" button which will send the data to SAP R/3 ( which we wish to do ).
Now in this case when user will click on Submit button ( means Third-party will initiate the process ) & data will be send to XI using ( for e.g ) HTTP sender then ABAPer's raised concern that how they will be able to show it in the right screen without using proper thread ID.
Pls. let me know in case you require any further information. My problem is this how to relate the Third-Party data with correct screen of SAP.
Thanks
- lalit -

Down payment request with reference to sales order

Hi all,
I have configured a down payment scenario integrated with SD module for delivery based order.
the flow is working fine when I post the down payment with transaction f-29 and insert the reference to the sales order (without item).
but when i try to do the same process using also the step of down payment request f-37 the system force me to insert also the item of the sales order in the down payment request. in fact the system issue error message
Enter the item number
    Message no. V1125
Diagnosis
    You have entered a sales document number without the item number.
    However, the item number is necessary.
Procedure
    Enter the item number."
I'm using special GL indicator "A" in both transaction.
any idea?
thanks
Paolo

Hi
This could be possible if you activate the Business Function SD_01 delived in EhP 2 in ECC 6.0. Note this activation is an irreversable function.
Read the utilities of the function for more details.
Regards
Sanil Bhandari

SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal

Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
Ashif

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Cisco Works Integration with MARS

Can cisco works be integrated with MARS. I mean cisco works is acting as a syslog server for some switches. Can mars pull the records from Cisco Works and use it for its co-relation

As Michael pointed out, configuring two syslog destinations on your switch is possible, and allows the switch to send to both CiscoWorks and CS-MARS simultaneously. This affords the safety that should one system be down, the other system will continue to receive syslog events from the switches. Should you not wish to configure two logging destinations on your switch, you could configure your switches to send their syslogs to CS-MARS and configure CS-MARS to relay the received syslog messages to CiscoWorks. This options is outlined in the CS-MARS user guide:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/cfgOver.html#wpmkr181270
Scott

Original and current budget together with PTD,ITD,MTD and YTD labor...

Hi experts:
I need a Project Accounting Report that shows Original and Current budget together with PTD,ITD,MTD and YTD labor amount, labor cost, non-labor cost, and revenue on the same line for all the task_id for a project. I know these are coming from these ,PA_BUDGET_VERSIONS V, PA_RESOURCE_ASSIGNMENTS A,PA_BUDGET_LINES L, main tables. But I am unable to break down the amounts according to PA and GL periods. Can anyone help please?
Thanks a million , in advance.

Help you with what?
No database version number.
No application name or version number.
No DDL.
Do you, for some reason, think we have any idea what PTD and ITD are? If so why?
Do you think we all have your version of a table named PA_RESOURCE_ASSIGNMENTS on our hard disks?
Perhaps you have some version of e-Business Suite. Perhaps you have SAP. Perhaps you have something we've never even heard of.
Your task is as follows:
1. If this question relates to an Oracle product change the subject of the post to "Please Ignore" and post your question in the correct forum.
or
2. Provide us with sufficient information that we can duplicate those portions of your environment required to understand what you are asking.

PA Top-Down budget integration with GL

Similar Messages

Maybe you are looking for