PA20 reports "No Authorization to read" after upgrade to ECC6

Hi Everyone,
We recently upgraded our system from SAP 4.6C to ECC6.0 SR3.
After the upgrade, when we try PA20/PA30, we get the message "No authorization to read data".
The user IDs we use already have SAP_ALL and SAP_NEW profiles assigned to them.
Is there anything that we need to do regarding this?
Thanks.

HI JLJ,
T COde: SU53. This will check the authorization for the last transaction. If your are not getting the desired result, then acess T.Code: SM01. IN this check, if any T Code is locked.
If found usefule award points
Regards,
Madhu Sudhanan

Similar Messages

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 Other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1.

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.

Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1. Win 7 64bit. 2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue. They didn't upgrade to 6.0.1 though. Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010. So it's a one-way problem.

Can't e-mail from Safari's Reader after upgrading to 7.0

How come I can't e-mail directly from Safari's Reader after upgrading to 7.0? That was a great feature. Why did Apple disable this or is something wrong with my Safari browser?

Thanks. I didn't know the command but the old version had a menu that appeared at the bottom of the page.

After upgradation to ECC6.0 two fields in report not showing

Hi,
While running Z report Vendor and Material Description is not appearing.This problem is faced after upgradation to ECC6.0.In 4.6C it was showing in detailed. Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin A

Hi Mohamed,
Thanks a lot for your immidiate reply.
Is there any reports for settlement document having material & vendor code with description.
Regards
Nitin

Paym.guar.proc. Field is Disable after Upgrade to ECC6

Hi All,
Would like to have your guide and opinion which Paym.guar.proc. Field is Disable after Upgrade to ECC6.
Thank you in advance.

Hi Lakshmipathi,
As per checked, only SO to DO document created only.
We have implemented below change Note : 1736052 with change of SAPMV50A2112, I/O field LIKP-ABSSC from output field to input field that was working fine.
Please let us know you have any feedback on it.
1736052 - Entering the payment guarantee procedure in delivery note
Trevor Wong.

Report variants missing in PC00_M10_REC after upgrade from 4.7 to ECC 6.0

After Upgrade to ECC 6.0 from 4.7 version, two variants for Payroll Reconciliation report in PC00_M10_REC are missing.
These variants were of users who have left the organisation/company.
Can anyone help me to restore those variants and tell me why those two variants got deleted.
Thanks in advance
Rohan Das.

Try to use program RSTRANSP , this will create transport request for variants. after creating the variant your basis team can move to ECC box
a®

How can I restore my card reader after upgrading to Mavericks?

I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?

Launch the Image Capture app in your Applications folder.
Conenct the card reader.
Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
Apple is not responsible for third party software and hardware used with your Mac.

MicroSD Card not reading after upgrade to Windows 10

I am using a 64GB SDXC card in my Lenovo YOGA Tablet 2-1051-F, with Windows 8.1. I formatted the card to NTFS. Everything was working fine, but now that I have upgraded to Windows 10, the only problem seems to be the card is not recognized any longer. The "SD" logo shows up in the "This PC" window, but when I try to click on it (left or right), it hangs and then after quite a while it asks me to insert a card. I have installed all the driver updates from the Lenovo support site (no downloads specific to the card reader). No change. I even downloaded a driver file from Realtek and ran it - maybe a mistake, but it doesn't seem to have changed anything at all. I don't seem to be able to find any information regarding the drivers for the reader or reinstalling them. Thanks for any suggestions! BTW, the card still reads fine when I put it in a slot on another machine.

I have the exact same problem using a Transcend 64GB SDXC card and Lenovo 1051F.The card worked before upgrading and works in other computers/readers. Extra informations : After upgrading when the micro sd card is in slot : - The tablet can't shutdown (error after several minutes) - The card is not properly recognized (appears sometimes in explorer but can't access to content) - Windows Explorer crashes and freezes randomly - Longer boot time - Bluetooth randomly fails to pair with bundled keyboard and a logitech bt mouse When I remove the sd card everything works as indended. No lag, bt works fine, boots and shutdowns fast...

HT4623 Can I use lightning SD camera card reader after upgrading my iPad 4 to iOS. 7?

Hi! All,
I am using lightning SD camera reader with my iPad 4 running with iOS 6 without any problem. But I would like to upgrade to iOS 7. I saw some reviews
after upgrading the card reader is not working. I contacted apple support community people for the above issue recently through chat. They said the device should work even after upgrading. I have not yet upgraded. But iOS 7 is tempting with its amazing look. What do I do? If I upgrade and my SD card reader wont work then I will be in great disapppointment. Please help if any body has answer for my problem..
Message was edited by: hemanthkumar.narsetti
Message was edited by: hemanthkumar.narsetti

If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
 Cheers, Tom

Mac OS mail (PDF) attachments cannot be read after upgrading to Maverick

After upgrading to Maverick receiver of e-mails with PDF attachment cannot see or open the attachment. Everything works normally with attaching and sending but it seems to disappear on its way to receiver.

Having the same problem…attachment is visible inline, but cannot be opened nor downloaded. See this thread:
https://discussions.apple.com/message/23508746

IDOC Syntax Error E0072 with status 26 after upgrade to ECC6.0

Hi
We have upgraded SAP R/3 from 4.6C to ECC6.0. After upgrade, when we create PO and output EDI, we are seeing this IDOC syntax error E0072 for Mandatory Segment E1EDK01. In 4.6C it was working fine with no issues, only after upgrade this problem started. It says E1EDK01 is missing which is mandatory. We are using basic type ORDERS01 with no extensions. When we see WE30 it looks fine, WE20 settings looks fine.
Order of the segments got scrambled in upgraded version. First segment is E1EDP19001, this is supposed to be under E1EDP01 segment. There are two E1EDP19001 segments created but there were no sub segments to E1EDP01.
Any help in this regard is highly appreciated.
Thanks
Pandiri

User Exit activation and fixing the issue in user exit fixed this issue.

Error in text formatting after upgrade to ECC6.0

Hi all,
After upgrading from 4.6C to ECC6.0, we encountered the error "The SD_WORD_PROCESSING function module is for creating the "Maintain Text" dialog box. It seems that after upgrade, some of the text procedure in the configuration is missing. Did anybody encounter this problem? Please advise.
Thanks.

Hi Mei,
Welcome to SDN.
It seems the customizing for the texts (Transaction VOTX) is incomplete.
Please check OSS Notes 150775 and 751690 for more detail information.
Regards,
Ferry Lianto
Please reward points if helpful.

Idocs failing after upgrade to ecc6

Hi Experts,
we upgrade the system to ECC6, before the idoc to idoc scenario was workinf fine, but after upgrade we are getting error in we02 with Function Module Not Allowed
Can any one help what was the wrong???
Kind Regards,
Praveen

Praveen,
Check out the message code and corresponding processing code in partner function(TC:WE20). Go to transaction WE57 and check for function module entry against your idoc basic type ( & Extension - if it is extended idoc) / message type. I think entry is missing here.
Thanks,
Nilesh

Error in depreciation postings after upgrade to ECC6.

Hi FI/Asset Gurus
We recently upgraded from 4.7 to ECC6. In 4.7 our depreciation postings were working fine but, after upgrade it is throwing an erroru2026u2026..
Create document number range Z2 using internal number assignment
Our number range Z2 has always been External Assignment, before and after the upgrade. Is there something changed in ECC.
Please help me out?
Thanks
Rajesh

Hi rajesh
From ECC 5.0 onwards, your dep no range has to be internal..
So, remove the tick for "External" in your no range for depreciation doc type.
Regards
Ajay M

Syntax error after upgrade to ECC6

Hi,
I have customized infotype and BAPI in SAP 4.6. After upgade to ECC6, my Infotype is working fine, but my BAPI give this error :
The following syntax error was found in the program SAPLZBAPI_HR :
"INCLUDE report "%_HR9000" not found."
If I goto SE38 to recreate %_HR9000, SAP not allow me to continue and appear message "Do not use any special character".
May I know how to resolve this problem ?
Thanks a million.
Regards,
Eric

Hi,
In the ECC6.0 version, it seems that one of the INCLUDE that was generated for that infotype in 4.6 C ending.. with words....HR9000 was not transported or not found for that infotype. Please check all the includes..
In SE38 you can enter the characters like %, so that error is coming
% means LIKE PATTERN ....HR9000 .
Hope you understood.
Regards,
ANJI

PA20 reports "No Authorization to read" after upgrade to ECC6

Similar Messages

Maybe you are looking for